Keith Bage wrote:
I'm sure this question has been covered many times so I apologise in advance
but could someone reassure me that Legacy WILL run on a Mac using either
Boot Camp, Fusion or Parallels and if so which of these PC emulators are
recommended.
Dar-WINE will also run it natively
I'm not sure about Windows 98 - but a look at the website for Fusion should
tell you.
Janis
On 10/3/08 6:01 PM, Eliz Hanebury [EMAIL PROTECTED] wrote:
Janis, could you use Fusion with Won 98 2ed? I have wanted a Mac for a
while but always heard I couldn't use it with Legacy so I never got
I also was one of these people hunting for the Source conversion tool for
the longest (after reading about it in the manual), just to find out that it
wasn't implemented yet. Unfortunately Millennia didn't chose a fairly simple
solution by adding an itme in the Tool menu Source Conversion Tool and
Allen, my experience is that DAR (Darwin Ports) Wine will sorta run
Legacy. It will look good on startup but there will be some features
that don't give you the output you expect. For normal users, Fusion
or Parallels is the best option. I have used both but prefer Fusion
because I can run
What is ClearPrint. I find that on my iMac it looks good, just a little
jaggy on the laptop.
What is ClearPrint?
Janis
On 10/4/08 9:14 AM, Jim Winfrey [EMAIL PROTECTED] wrote:
Allen, my experience is that DAR (Darwin Ports) Wine will sorta run
Legacy. It will look good on startup but there
Patty - I concur with Keith - I tried Parallels, but ran into some issues. I
installed Fusion and it allowed me to install Legacy 7.0. Some minor tweaking
was required (don't recall the exact items), but I have Legacy running great
and was even able to install Ubuntu 8.04 via the Fusion
What a lame message (mine). Can you tell that I am cooking brunch for
guests, while thinking about genealogy?
At any rate, Jim, what IS clearprint? (-:
Janis
On 10/4/08 9:27 AM, Janis L Gilmore [EMAIL PROTECTED] wrote:
What is ClearPrint. I find that on my iMac it looks good, just a little
You can do a _manual_ merge by using rin numbers. Just be causous the
information on the left is the information you wish to keep. and the one
with the other rin number (same name) the name on the right will have no
info will be merged together.
BACKUP
Tim
- Original Message -
From:
When selecting the 1870 federal census the series is pre-entered as M593.
Isn't Minnesota on T132?
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support:
Reg SHERLOCK had the best advise. Follow what the Legacy help pages have to
say.
On another note, you redisigned the help page. Looks great.
http://www.legacyfamilytree.com/Frequent.asp
Tim
- Original Message -
From: Richard and Evita Piepho
To: legacyusergroup@legacyfamilytree.com
Every now and then I have attached a TIFF file as a personal photo or for a
source document while running V6. I would attach it as a picture (not using
Video or Sound icon) and egacy V6 would display a thumbnail and be able to
open directly from Legacy.
Now, many months after moving to Legacy V7
Richard Van Wasshnova wrote
Now, many months after moving to Legacy V7 I notice a TIFF file does
not open, it seems to be missing. I can attach it as a Document OK but
if I try to attach it as a Picture it doesn't work.
I have just put a /tif photo into my family file, both as an
Richard Van Wasshnova wrote:
Every now and then I have attached a TIFF file as a personal photo or
for a source document while running V6. I would attach it as a picture
(not using Video or Sound icon) and egacy V6 would display a thumbnail
and be able to open directly from Legacy.
Now, many
It does look like Minnesota is the only state where some of the counties are
in T132. See
http://archives.gov/publications/microfilm-catalogs/census/1790-1890/part-05
.html#t132. For now, use the override link to change the series. I'll make a
note of this for future consideration.
Thanks,
Geoff
This is not a merge issue. from previous posts, we have realized there are two
marriages for the same couple, one with children, the other with 'half'
children. What is needed is to unlink (not delete) the couple in the 'second'
marriage, then look to confirm it is fixed.
Rich in LA CA
--- On
Open the picture (one that doesn't show) in a photo editor and pretend
you're going to resave it. A box for compression options will show.
Make sure it says 'None'. If it doesn't, resave it with no
compression. Would be interested to know if that's the issue.
-
JL
JLog - simple
I am not sure what the problem is. I use only L7, and I have over 500 .tif
files as photos, which display properly. I have tried to add one of my 'tiffs'
using FILE, to a person, and the 'icon' type drawing of a stack of papers
showed up. When I clicked on the icon, it brought up the photo. I
Richard,
This is (probably) a compression issue. I've had the same problem. I usually
use Microsoft Picture It aka Digital Image Pro to save/convert images to TIF.
Even though I have compression turned OFF this program still saves TIF images
with LZW compression. I found if I use another
ClearPrint is an addon that Msoft offers so that the print edges don't
look jaggy. It comes with later releases of XP and 2000 but I think
there are/were downloads on Msoft's site for it. In XP it is not
automatically turned on. You have to go through the desktop setup and
click the advanced
19 matches
Mail list logo
