Using btrfs-progs v3.14:
mkfs.btrfs ... --features ...
segfaults.
mkfs.btrfs ... -O ...
works fine.
* I used other long options, so it's not simply a problem parsing long
options.
* I tried the long option with various features; none worked, including
--features list-all with no other
On Wed, 16 Apr 2014 06:41:44 +, Duncan wrote:
Using btrfs-progs v3.14:
mkfs.btrfs ... --features ...
segfaults.
Can reproduce (also with glibc 2.19 on Gentoo ;-) and building with debug
found:
(gdb) bt
#0 0x76f3aaea in strlen () from /lib64/libc.so.6
#1 0x76f3a82e
On Wed, 16 Apr 2014 07:48:53 +, Holger Hoffstätte wrote:
On Wed, 16 Apr 2014 06:41:44 +, Duncan wrote:
Using btrfs-progs v3.14:
mkfs.btrfs ... --features ...
segfaults.
Can reproduce (also with glibc 2.19 on Gentoo ;-) and building with debug
found:
(gdb) bt
#0
Btrfs will send uevent to udev inform the device change,
but ctime/mtime for the block device inode is not udpated, which cause
libblkid used by btrfs-progs unable to detect device change and use old
cache, causing 'btrfs dev scan; btrfs dev rmove; btrfs dev scan' give an
error message.
On Tuesday 01 Apr 2014 11:53:19 PM Filipe David Borba Manana wrote:
+static int btrfs_tmpfile(struct inode *dir, struct dentry *dentry, umode_t
mode)
+{
+ struct btrfs_trans_handle *trans;
+ struct btrfs_root *root = BTRFS_I(dir)-root;
+ struct inode *inode = NULL;
+ u64
On Wed, Apr 16, 2014 at 10:00 AM, Chandan Rajendra
chan...@linux.vnet.ibm.com wrote:
On Tuesday 01 Apr 2014 11:53:19 PM Filipe David Borba Manana wrote:
+static int btrfs_tmpfile(struct inode *dir, struct dentry *dentry, umode_t
mode)
+{
+ struct btrfs_trans_handle *trans;
+ struct
On Wed, Apr 16, 2014 at 11:36:23AM +0100, Filipe David Manana wrote:
The xattr is needed for the case where an acl is inherited. And 5
units are required for orphan insertion (see comment on top of
btrfs_orphan_add).
I'll update the comment.
I don't think think a tmpfile should inherit any
On Friday 11 April 2014 12:39:31 Brendan Hide wrote:
If you're 100% happy with your old disk's *content*/layout/etc (just
not happy with the disk's reliability), try an
overnight/over-weekend ddrescue instead
Thanks again to everyone who replied and especially for suggesting
ddrescue. In the
On Wed, Apr 16, 2014 at 12:09 PM, Christoph Hellwig h...@infradead.org wrote:
On Wed, Apr 16, 2014 at 11:36:23AM +0100, Filipe David Manana wrote:
The xattr is needed for the case where an acl is inherited. And 5
units are required for orphan insertion (see comment on top of
btrfs_orphan_add).
On Wed, Apr 16, 2014 at 12:25:07PM +0100, Filipe David Manana wrote:
Interesting Christoph.
I was following the ext4 implementation initially.
So it seems the question is still open, and none of the following
alternatives is decided yet (unless I missed something in the thread
at fsdevel):
Hello,
I have created a 500GB partition on my HDD and formatted it for btrfs.
I created a file on it.
# echo tmp data in the tmp file.. /mnt/btrfs/tmp-file
# umount /mnt/btrfs
Next I want to know the blocks allocated for the file and I used
filefrag for it. I get some information as follows -
On Tue, Apr 15, 2014 at 01:21:46PM -0400, Chris Mason wrote:
On 04/15/2014 12:27 PM, David Sterba wrote:
On Tue, Apr 15, 2014 at 12:00:49PM -0400, Chris Mason wrote:
I'm worried about the use case where we have:
* periodic automated snapshots
* periodic automated deletion of old
On 04/16/2014 09:32 AM, David Sterba wrote:
On Tue, Apr 15, 2014 at 01:21:46PM -0400, Chris Mason wrote:
On 04/15/2014 12:27 PM, David Sterba wrote:
On Tue, Apr 15, 2014 at 12:00:49PM -0400, Chris Mason wrote:
I'm worried about the use case where we have:
* periodic automated
This increases the send stream version from version 1 to version 2, adding
2 new commands:
1) total data size - used to tell the receiver how much file data the stream
will add or update;
2) fallocate - used to pre-allocate space for files and to punch holes in files.
This is preparation
Instead of sending a write command with a data buffer filled with 0 value bytes,
use the fallocate command, introduced in the send stream version 2, to tell the
receiver to punch a file hole using the fallocate system call.
Signed-off-by: Filipe David Borba Manana fdman...@gmail.com
---
V2: A v2
The send stream version 2 adds the fallocate command, which can be used to
allocate extents for a file or punch holes in a file. Previously we were
ignoring file prealloc extents or treating them as extents filled with 0
bytes and sending a regular write command to the stream.
After this change,
This increases the send stream version from version 1 to version 2, adding
2 new commands:
1) total data size - used to tell the receiver how much file data the stream
will add or update;
2) fallocate - used to pre-allocate space for files and to punch holes in files.
This is preparation
This is a followup to the kernel patch titled:
Btrfs: send, implement total data size command to allow for progress
estimation
This makes the btrfs send and receive commands aware of the new send flag,
named BTRFS_SEND_C_TOTAL_DATA_SIZE, which tells us the amount of file data
that is new
The fallocate send stream command, added in stream version 2, is used to
pre-allocate space for files and punch file holes. This change implements
the callback for that new command, using the fallocate function from the
standard C library to carry out the specified action (allocate file space
or
This new send flag makes send calculate first the amount of new file data (in
bytes)
the send root has relatively to the parent root, or for the case of a
non-incremental
send, the total amount of file data the stream will create (including holes and
prealloc
extents). In other words, it
When specifying -vv print information about received write and clone commands
too,
as we do this for other commands already and it's very useful for debugging and
troubleshooting.
Signed-off-by: Filipe David Borba Manana fdman...@gmail.com
---
V2: Added new send ioctl flag
This test verifies that after an incremental btrfs send the
replicated file has the same exact hole and data structure as in
the origin filesystem. This didn't use to be the case before the
send stream version 2 - holes were sent as write operations of 0
valued bytes instead of punching holes with
This test case verifies the btrfs properties feature, a new feature
introduced in the linux kernel version 3.14.
Signed-off-by: Filipe David Borba Manana fdman...@gmail.com
---
V2: Addressed Dave's comments, removed function to check for existence of
the btrfs-progs property command and use
On Wed, Apr 16, 2014 at 1:23 AM, Dave Chinner da...@fromorbit.com wrote:
On Tue, Apr 15, 2014 at 05:43:21PM +0100, Filipe David Borba Manana wrote:
This test verifies that after an incremental btrfs send the replicated file
has
the same exact hole and data structure as in the origin
Hi Ducan,
But as I said, I'd sure like to get to the bottom of this one, since I do
believe it has other potential implications in terms of bugs, etc. In
theory, a balance should either not affect performance or should improve
it, so getting to the bottom of why it's having such a bad
Hello,
I have a broken btrfs file system on a laptop.
Debug material is available here:
https://www.dropbox.com/sh/utv8b3qd0do6a04/zTwGQCrN9x
Most importantly, the /home subvolume is lost. All attempts to recover
data from it (btrfs-restore, mount -o recovery, btrfsck) have failed so
far
There's a case which clone does not handle and used to BUG_ON instead,
(testcase xfstests/btrfs/035), now returns EINVAL. This error code is
confusing to the ioctl caller, as it normally signifies errorneous
arguments.
Change it to EOPNOTSUPP which allows a fall back to copy instead of
clone.
Instead of sending a write command with a data buffer filled with 0 value bytes,
use the fallocate command, introduced in the send stream version 2, to tell the
receiver to punch a file hole using the fallocate system call.
Signed-off-by: Filipe David Borba Manana fdman...@gmail.com
---
V2: A v2
On 2014/04/16 03:40 PM, Chris Mason wrote:
So in my example with the automated tool, the tool really shouldn't be
deleting a snapshot where send is in progress. The tool should be
told that snapshot is busy and try to delete it again later.
It makes more sense now, 'll queue this up for 3.16
On Wed, Apr 16, 2014 at 09:40:41AM -0400, Chris Mason wrote:
It makes more sense now, 'll queue this up for 3.16 and we can try it out in
-next.
Thanks. 3.16 is fine for me.
--
To unsubscribe from this list: send the line unsubscribe linux-btrfs in
the body of a message to
On Wed, Apr 16, 2014 at 04:59:09PM +0200, Brendan Hide wrote:
On 2014/04/16 03:40 PM, Chris Mason wrote:
So in my example with the automated tool, the tool really shouldn't be
deleting a snapshot where send is in progress. The tool should be told
that snapshot is busy and try to delete it
On Apr 16, 2014, at 7:53 AM, Martin Wilck mwi...@arcor.de wrote:
The crash happened with a rather old OpenSUSE 12.2 kernel (3.4.11-2.16).
The user says she was just surfing the web normally when the crash
occured (no screenshot of the original crash, unfortunately). On the
next boot, the
The send stream version 2 adds the fallocate command, which can be used to
allocate extents for a file or punch holes in a file. Previously we were
ignoring file prealloc extents or treating them as extents filled with 0
bytes and sending a regular write command to the stream.
After this change,
On Wed, Apr 02, 2014 at 04:29:11PM +0800, Qu Wenruo wrote:
Convert the old btrfs man pages to new asciidoc and split the huge
btrfs man page into subcommand man page.
I'm merging this patchset into the base series of integration because
several patches need to update the docs and it's no longer
The 'btrfsck' command has been deprecated in favor of 'btrfs check'. For
compatibility install a symlink to the btrfs-check.8 manpage.
CC: Qu Wenruo quwen...@cn.fujitsu.com
Signed-off-by: David Sterba dste...@suse.cz
---
Documentation/Makefile| 2 ++
Documentation/btrfs-check.txt | 3 ++-
On Wed, Apr 16, 2014 at 03:56:15PM +0100, Filipe David Borba Manana wrote:
V2: Added new send ioctl flag BTRFS_SEND_FLAG_SUPPORT_FALLOCATE. A version 2
stream is now only produced is the ioctl caller specifies at least one of
the new send flags (BTRFS_SEND_FLAG_SUPPORT_FALLOCATE or
Signed-off-by: David Disseldorp dd...@suse.de
---
cmds-subvolume.c | 2 +-
man/btrfs.8.in | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/cmds-subvolume.c b/cmds-subvolume.c
index 5e821c7..75a7385 100644
--- a/cmds-subvolume.c
+++ b/cmds-subvolume.c
@@ -390,7 +390,7 @@
Hi,
what kernel version are you running?
Marian
On 04/16/2014 08:42 PM, Richard Davies wrote:
Hi all,
I have a test case in which I can often crash an entire machine by running
dd to a file with a memcg with relatively generous limits. This is
simplified from real world problems with heavy
Richard Davies wrote:
I have a test case in which I can often crash an entire machine by running
dd to a file with a memcg with relatively generous limits. This is
simplified from real world problems with heavy disk i/o inside containers.
The crashes are easy to trigger when dding to create a
Hi all,
I have a test case in which I can often crash an entire machine by running
dd to a file with a memcg with relatively generous limits. This is
simplified from real world problems with heavy disk i/o inside containers.
The crashes are easy to trigger when dding to create a file on btrfs.
On Wed, Apr 16, 2014 at 6:43 PM, David Sterba dste...@suse.cz wrote:
On Wed, Apr 16, 2014 at 03:56:15PM +0100, Filipe David Borba Manana wrote:
V2: Added new send ioctl flag BTRFS_SEND_FLAG_SUPPORT_FALLOCATE. A version 2
stream is now only produced is the ioctl caller specifies at least one
This is a followup to the kernel patch titled:
Btrfs: send, implement total data size command to allow for progress
estimation
This makes the btrfs send and receive commands aware of the new send flag,
named BTRFS_SEND_C_TOTAL_DATA_SIZE, which tells us the amount of file data
that is new
The fallocate send stream command, added in stream version 2, is used to
pre-allocate space for files and punch file holes. This change implements
the callback for that new command, using the fallocate function from the
standard C library to carry out the specified action (allocate file space
or
On 16 April 2014 15:27, Aastha Mehta aasth...@gmail.com wrote:
Hello,
I have created a 500GB partition on my HDD and formatted it for btrfs.
I created a file on it.
# echo tmp data in the tmp file.. /mnt/btrfs/tmp-file
# umount /mnt/btrfs
Next I want to know the blocks allocated for the
On Mon, Apr 14, 2014 at 10:28:36AM +, Duncan wrote:
But you might well be the first report where the devs have good access to
enough detail to actually trace down the problem.
I'll wait until tomorrow night to see if the devs want anything else out
of it, but otherwise I'll wipe it
On Wed, Apr 16, 2014 at 03:39:18PM +0100, Filipe David Manana wrote:
On Wed, Apr 16, 2014 at 1:23 AM, Dave Chinner da...@fromorbit.com wrote:
On Tue, Apr 15, 2014 at 05:43:21PM +0100, Filipe David Borba Manana wrote:
This test verifies that after an incremental btrfs send the replicated
On Thu, Apr 17, 2014 at 12:13 AM, Dave Chinner da...@fromorbit.com wrote:
On Wed, Apr 16, 2014 at 03:39:18PM +0100, Filipe David Manana wrote:
On Wed, Apr 16, 2014 at 1:23 AM, Dave Chinner da...@fromorbit.com wrote:
On Tue, Apr 15, 2014 at 05:43:21PM +0100, Filipe David Borba Manana wrote:
This test verifies that after an incremental btrfs send the
replicated file has the same exact hole and data structure as in
the origin filesystem. This didn't use to be the case before the
send stream version 2 - holes were sent as write operations of 0
valued bytes instead of punching holes with
Original Message
Subject: [PATCH] btrfs-progs: doc: link btrfsck to btrfs-check
From: David Sterba dste...@suse.cz
To: linux-btrfs@vger.kernel.org
Date: 2014年04月17日 01:16
The 'btrfsck' command has been deprecated in favor of 'btrfs check'. For
compatibility install a symlink
49 matches
Mail list logo