Michael Krufky mkrufky at linuxtv.org writes:
On 11/1/07, MikeW mw_phil at yahoo.co.uk wrote:
Using the OM5776 eval board, and using the algorithm published
in the rev 1.1.0 datasheet, I find I am getting an I2C NAK,
which does not go away and requires a chip reset to restore
any I2C
My configuration:
Ubuntu 7.10(32-bit), Kernel 2.6.20-14-generic, AMD Athlon X2 3800+,
Skystar HD
and I try to run:
multiproto-bad6ebd6bf8c
after
make
sudo make install
sudo modprobe budget_ci
kaffeine:
Failed to open device
0
szap2 rtl:
reading channels from file
Bonne Eggleston wrote:
On Sat, 1 Sep 2007 04:41:27 pm victor rajewski wrote:
Hi,
I'm trying to debug some problems with my Dvico Dual Digital 4 card
(using patches from
http://fremnet.net/article/228/dvico-fusionhdtv-dual-digital-4-under-linux)
and I've noticed in dmesg that the firmware
On Sat, 1 Sep 2007 04:41:27 pm victor rajewski wrote:
Hi,
I'm trying to debug some problems with my Dvico Dual Digital 4 card
(using patches from
http://fremnet.net/article/228/dvico-fusionhdtv-dual-digital-4-under-linux)
and I've noticed in dmesg that the firmware seems to get written to
the
I demand that Gasiu may or may not have written...
[snip]
[ 1216.812000] Modules linked in: [...] nvidia(P) [...]
[ 1216.812000] CPU: 0
[ 1216.812000] EIP: 0060:[f8d63de4] Tainted: P VLI
[snip]
Is this repeatable without the nvidia taint?
(Not that I'm in any position to help...)
--
|
Thanks to Olivier,
I was trying to get it working but I did a mistake putting the cards in
the generic section. Putting it in stk section did it :-)
I got it to work. I attached the hg diff.
Using dvb-apps from hg gives me a Unable to query frontend status.
For scanning, I'm using gentoo ebuild
On Mon, Nov 05, 2007 at 01:52:26PM -0500, Steven Toth wrote:
At this stage I'm looking for a Yes, in principle we like the idea, but
show me how you do feature XYZ from other devs. At which point I'll flush
out more code this would probably lead to an RFC for your approval.
Seems
Sorry for spamming and replying in the wrong place,
I did forget the attached file
@+
dom
diff -r a4122c9c5a5d linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
--- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c Thu Nov 01 22:52:58 2007 -0200
+++
On Wed, 2007-09-26 at 11:42 +0200, Patrick Boettcher wrote:
Hi all,
it seems that there still problems related to USB with the latest
firmware.
In order to figure out what is the problem I would like to gather some
information about the affected systems:
Can everyone (people who
Hello, ppl.
just digging your maillist archive and found some topics about
Compro Videomate S350 (DVB-T300)
I'am curious if somebody can get video from DVB-S VideoMate S350 card
nowadays...
My test machine is i686, Linux 2.6.22-14, modules from (trunk)
http://linuxtv.org/hg/v4l-dvb
here is my
On Dienstag, 6. November 2007, Anton P. Linevich wrote:
Hello, ppl.
just digging your maillist archive and found some topics about
Compro Videomate S350 (DVB-T300)
I'am curious if somebody can get video from DVB-S VideoMate S350 card
nowadays...
My test machine is i686, Linux 2.6.22-14,
Gregoire Favre wrote:
On Mon, Nov 05, 2007 at 01:52:26PM -0500, Steven Toth wrote:
At this stage I'm looking for a Yes, in principle we like the idea, but
show me how you do feature XYZ from other devs. At which point I'll flush
out more code this would probably lead to an RFC for your
On 06/11/2007, Steven Toth [EMAIL PROTECTED] wrote:
Gregoire Favre wrote:
On Mon, Nov 05, 2007 at 01:52:26PM -0500, Steven Toth wrote:
At this stage I'm looking for a Yes, in principle we like the idea,
but
show me how you do feature XYZ from other devs. At which point I'll
flush
out
Gregoire Favre wrote:
On Mon, Nov 05, 2007 at 01:52:26PM -0500, Steven Toth wrote:
At this stage I'm looking for a Yes, in principle we like the idea, but
show me how you do feature XYZ from other devs. At which point I'll flush
out more code this would probably lead to an RFC for your
Johannes Stezenbach wrote:
On Sat, Nov 03, 2007, Manu Abraham wrote:
If you see H.2 and H.3, the difference is between CCM and VCM
(Note: that both are cases of multiple TS's)
H.2 (CCM) is applicable for DVB-T muxes. Here there is a HP/LP
stream selection in some fashion combined with the
keywords: af9016 linux working driver usb id 15a4:9016
found a working driver for 15a4:9016 (from afatech?)
http://af.zsolttech.com/
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Ian Bonham wrote:
On 06/11/2007, *Steven Toth* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
Gregoire Favre wrote:
On Mon, Nov 05, 2007 at 01:52:26PM -0500, Steven Toth wrote:
At this stage I'm looking for a Yes, in principle we like the
idea, but
show me
Hi,
gimli wrote:
Hi,
the last days i played around to add support for the WinTV Nova HD S2 and
hvr4000/3000 cards from the hvr4000 to your tree. is there any chance to
get the patch in your tree so we have only one tree for the new dvb-s2
drivers ?
I don't know whether Steven is going to
Hi!
I downloaded the CVS tarball today to try it out (until
now I have been compiling the drivers into the kernel, currently 2.6.22
and that works great).
I downloaded the tarball, unpacked, make; make install; and then I tried
to modprobe ...
I have four DVB cards;
Hauppauge Nova-S-Plus
Francesco Schiavarelli wrote:
Johannes Stezenbach wrote:
On Sat, Nov 03, 2007, Manu Abraham wrote:
If you see H.2 and H.3, the difference is between CCM and VCM
(Note: that both are cases of multiple TS's)
H.2 (CCM) is applicable for DVB-T muxes. Here there is a HP/LP stream
selection in
keywords: af9015 linux working driver usb id 15a4:9016
stupid typo, sry
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
2 new transponder
# DVB-T of Austria
# Thomas Pinz (tom_p at gmx.de)
# Source: http://www.edi-hof.de/dvb-t/oesterreich/dvb-t-oesterreich-index.html
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
#T 75400 8MHz 3/4 NONE QAM16 8k 1/4 NONE #K56, Eisenstadt (Burgenland)
hy,
should a new multiproto DVB-S2 card work with old applications (of course only
in DVB-S mode)?
regards,
gernot
p.s.: sorry, for the question but i didn't find a answer on the ml
___
linux-dvb mailing list
linux-dvb@linuxtv.org
hello,
I just test with A-Link DTU(m) in Finland and drivers seems to work.
Regards
Antti Palosaari
Arris [ML] wrote:
keywords: af9015 linux working driver usb id 15a4:9016
stupid typo, sry
___
linux-dvb mailing list
linux-dvb@linuxtv.org
Hi,
Just bought myself such a USB DVB tuner and
it installs fine in Linus 2.6.23.1, but when trying to
use scandvb with it I only get tuning failed!!!
No errors in the logs though. It just doesn't tune.
I checked this individual in Windows XP and I do get
tuning and programs there.
Any advice
25 matches
Mail list logo