[linux-dvb] HVR-1250, Suse 10.3, scan hangs, taints kernel.
Not sure what is happening here. I'm about to rebuild the box again and see if it works before I install everything that I did to it. Here is what I have so far.. Thoughts? I was thinking sensors (k8temp, it87), but I removed them, and it stil happens. -Mark --- tune to: 509028615:8VSB WARNING: tuning failed!!! tune to: 509028615:8VSB (tuning failed) WARNING: tuning failed!!! tune to: 515028615:8VSB service is running. Channel number: 14:1. Name: 'WIWB-HD*' mythtv:~ # dmesg CORE cx23885[0]: subsystem: 0070:7911, board: Hauppauge WinTV-HVR1250 [card=3,autodetected] cx23885[0]: i2c bus 0 registered cx23885[0]: i2c bus 1 registered cx23885[0]: i2c bus 2 registered tveeprom 2-0050: Encountered bad packet header [ff]. Corrupt or not a Hauppauge eeprom. cx23885[0]: warning: unknown hauppauge model #0 cx23885[0]: hauppauge eeprom: model=0 cx23885[0]: cx23885 based dvb card MT2131: successfully identified at address 0x61 DVB: registering new adapter (cx23885[0]) DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... cx23885_dev_checkrevision() Hardware revision = 0xc0 cx23885[0]/0: found at :02:00.0, rev: 3, irq: 21, latency: 0, mmio: 0xfd60 BUG: unable to handle kernel paging request at virtual address fd7f printing eip: c01090bd *pde = Oops: [#1] SMP last sysfs file: /devices/pci:00/:00:18.3/name Modules linked in: snd_pcm_oss snd_mixer_oss snd_seq_midi snd_seq_midi_event snd_seq iptable_filter ip_tables ip6_tables x_tables xfs loop dm_mod mt2131 s5h1409 osst ohci1394 cx23885 nvidia(P) ieee1394 videodev v4l1_compat compat_ioctl32 v4l2_common st button rtc_cmos snd_hda_intel rtc_core snd_pcm snd_timer snd_mpu401 forcedeth rtc_lib btcx_risc tveeprom videobuf_dvb dvb_core videobuf_dma_sg agpgart snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore hwmon videobuf_core snd_page_alloc parport_pc lirc_imon(F) parport sr_mod cdrom i2c_nforce2 i2c_core lirc_dev sg sd_mod ehci_hcd ohci_hcd usbcore edd ext3 mbcache jbd fan aic7xxx scsi_transport_spi sata_nv pata_amd libata scsi_mod thermal processor CPU:0 EIP:0060:[c01090bd]Tainted: PF N VLI EFLAGS: 00010286 (2.6.22.17-0.1-default #1) EIP is at dma_free_coherent+0x22/0x53 eax: ebx: ebcab000 ecx: fd7f edx: 01d4 esi: edi: f305422c ebp: f746d1e0 esp: ebc77f60 ds: 007b es: 007b fs: 00d8 gs: ss: 0068 Process cx23885[0] dvb (pid: 4290, ti=ebc76000 task=f600f570 task.ti=ebc76000) Stack: dfe01c90 dfe01c48 f9178416 2bcab000 f918a358 ffea f30541c0 f3054248 f746d128 f92a1dcd f746d128 0282 f914a414 f746d128 ebc8be80 f914a504 f746d128 f746d120 f914a58b ebc8bea4 f915f3e7 c011dfa6 Call Trace: [f9178416] btcx_riscmem_free+0x58/0x68 [btcx_risc] [f918a358] videobuf_dma_unmap+0x43/0x58 [videobuf_dma_sg] [f92a1dcd] cx23885_free_buffer+0x4a/0x55 [cx23885] [f914a414] videobuf_queue_cancel+0x72/0x8e [videobuf_core] [f914a504] __videobuf_read_stop+0xb/0x53 [videobuf_core] [f914a58b] videobuf_read_stop+0xf/0x17 [videobuf_core] [f915f3e7] videobuf_dvb_thread+0xec/0x12f [videobuf_dvb] [c011dfa6] complete+0x39/0x48 [f915f2fb] videobuf_dvb_thread+0x0/0x12f [videobuf_dvb] [c01350ee] kthread+0x38/0x5e [c01350b6] kthread+0x0/0x5e [c0106117] kernel_thread_helper+0x7/0x10 === Code: d8 5b e9 eb 44 06 00 5b c3 56 53 89 cb 31 c9 85 c0 74 06 8b 88 40 01 00 00 8d 42 ff 83 ce ff c1 e8 0b 46 d1 e8 75 fb 85 c9 74 26 8b 11 39 d3 72 20 8b 41 08 c1 e0 0c 8d 04 02 39 c3 73 13 29 d3 EIP: [c01090bd] dma_free_coherent+0x22/0x53 SS:ESP 0068:ebc77f60 mythtv:~ # lsmod Module Size Used by snd_pcm_oss50432 0 snd_mixer_oss 20096 1 snd_pcm_oss snd_seq_midi 13440 0 snd_seq_midi_event 10880 1 snd_seq_midi snd_seq54452 2 snd_seq_midi,snd_seq_midi_event iptable_filter 6912 0 ip_tables 16324 1 iptable_filter ip6_tables 17476 0 x_tables 18308 2 ip_tables,ip6_tables xfs 502932 1 loop 21636 0 dm_mod 56880 3 mt2131 9732 1 s5h140912548 1 osst 54172 0 ohci1394 36272 0 cx2388566644 2 nvidia 7846932 26 ieee1394 91136 1 ohci1394 videodev 35584 1 cx23885 v4l1_compat16388 1 videodev compat_ioctl32 5376 1 cx23885 v4l2_common14976 1 cx23885 st 40092 0 button 12560 0 rtc_cmos 12064 0 snd_hda_intel 273180 3 rtc_core 23048 1 rtc_cmos snd_pcm82564 3 snd_pcm_oss,snd_hda_intel snd_timer 26756 2 snd_seq,snd_pcm snd_mpu401 12684 0 forcedeth 50056 0 rtc_lib 7040 1 rtc_core btcx_risc 8712 1 cx23885
Re: [linux-dvb] HVR-1250, Suse 10.3, scan hangs, taints kernel.
Okay, clean install. Did it again. Installed Suse 10.3, installed all updates. Uninstalled lirc, but I see the modules are still there. So, pretty much clean install. Added kernel-sources, and gcc. Compiled and installed CVS. Modprobe cx23885 Didn't even load the Nvidia drivers. Let me get rid of lirc_imon lirc_imon2 and see what happens. -Mark mythtv:~ # lsmod Module Size Used by mt2131 9732 1 s5h140912548 1 cx2388566644 2 videodev 35584 1 cx23885 v4l1_compat17412 1 videodev compat_ioctl32 5376 1 cx23885 v4l2_common14976 1 cx23885 btcx_risc 8712 1 cx23885 tveeprom 15748 1 cx23885 videobuf_dvb 10628 1 cx23885 dvb_core 76548 1 videobuf_dvb videobuf_dma_sg17028 2 cx23885,videobuf_dvb videobuf_core 21380 3 cx23885,videobuf_dvb,videobuf_dma_sg xfs 502932 1 snd_pcm_oss50432 0 snd_mixer_oss 20096 1 snd_pcm_oss snd_seq_midi 13440 0 snd_seq_midi_event 10880 1 snd_seq_midi snd_seq54452 2 snd_seq_midi,snd_seq_midi_event iptable_filter 6912 0 ip_tables 16324 1 iptable_filter ip6_tables 17476 0 x_tables 18308 2 ip_tables,ip6_tables loop 21636 0 dm_mod 56880 3 osst 54172 0 ohci1394 36272 0 ieee1394 91136 1 ohci1394 st 40092 0 button 12560 0 rtc_cmos 12064 0 lirc_imon 19716 0 rtc_core 23048 1 rtc_cmos rtc_lib 7040 1 rtc_core lirc_imon2 19204 0 snd_hda_intel 273180 1 snd_pcm82564 2 snd_pcm_oss,snd_hda_intel snd_mpu401 12684 0 snd_mpu401_uart12416 1 snd_mpu401 snd_rawmidi28416 2 snd_seq_midi,snd_mpu401_uart snd_seq_device 12172 3 snd_seq_midi,snd_seq,snd_rawmidi k8temp 9600 0 snd_timer 26756 2 snd_seq,snd_pcm parport_pc 40892 0 snd58164 13 snd_pcm_oss,snd_mixer_oss,snd_seq_midi,snd_seq,snd_hda_intel,snd_pcm,snd _mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_timer hwmon 7300 1 k8temp forcedeth 50056 0 parport37832 1 parport_pc soundcore 11460 1 snd lirc_dev 18136 2 lirc_imon,lirc_imon2 i2c_nforce2 9856 0 snd_page_alloc 14472 2 snd_hda_intel,snd_pcm sr_mod 19492 0 cdrom 37020 1 sr_mod i2c_core 27520 6 mt2131,s5h1409,cx23885,v4l2_common,tveeprom,i2c_nforce2 sg 37036 0 sd_mod 31104 7 ohci_hcd 23684 0 ehci_hcd 35340 0 usbcore 124268 5 lirc_imon,lirc_imon2,ohci_hcd,ehci_hcd edd12996 0 ext3 131848 4 mbcache12292 1 ext3 jbd68148 1 ext3 fan 9220 0 aic7xxx 157348 0 scsi_transport_spi 27008 1 aic7xxx sata_nv22664 6 pata_amd 16644 0 libata139216 2 sata_nv,pata_amd scsi_mod 140376 8 osst,st,sr_mod,sg,sd_mod,aic7xxx,scsi_transport_spi,libata thermal20872 0 processor 40876 1 thermal mythtv:~ # dmesg CORE cx23885[0]: subsystem: 0070:7911, board: Hauppauge WinTV-HVR1250 [card=3,autodetected] cx23885[0]: i2c bus 0 registered cx23885[0]: i2c bus 1 registered cx23885[0]: i2c bus 2 registered tveeprom 2-0050: Encountered bad packet header [ff]. Corrupt or not a Hauppauge eeprom. cx23885[0]: warning: unknown hauppauge model #0 cx23885[0]: hauppauge eeprom: model=0 cx23885[0]: cx23885 based dvb card MT2131: successfully identified at address 0x61 DVB: registering new adapter (cx23885[0]) DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... cx23885_dev_checkrevision() Hardware revision = 0xc0 cx23885[0]/0: found at :02:00.0, rev: 3, irq: 22, latency: 0, mmio: 0xfd60 PCI: Setting latency timer of device :02:00.0 to 64 BUG: unable to handle kernel paging request at virtual address fd7f printing eip: c01090bd *pde = Oops: [#1] SMP last sysfs file: /devices/pci:00/:00:00.0/class Modules linked in: mt2131 s5h1409 cx23885 videodev v4l1_compat compat_ioctl32 v4l2_common btcx_risc tveeprom videobuf_dvb dvb_core videobuf_dma_sg videobuf_core xfs snd_pcm_oss snd_mixer_oss snd_seq_midi snd_seq_midi_event snd_seq iptable_filter ip_tables ip6_tables x_tables loop dm_mod osst ohci1394 ieee1394 st button rtc_cmos lirc_imon rtc_core rtc_lib lirc_imon2 snd_hda_intel snd_pcm snd_mpu401 snd_mpu401_uart snd_rawmidi snd_seq_device k8temp snd_timer parport_pc snd hwmon forcedeth parport soundcore lirc_dev
Re: [linux-dvb] HVR-1250, Suse 10.3, scan hangs, taints kernel.
Oh yeah... Linux mythtv 2.6.22.17-0.1-default #1 SMP 2008/02/10 20:01:04 UTC i686 athlon i386 GNU/Linux -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steven Toth Sent: Monday, March 17, 2008 10:51 AM To: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] HVR-1250, Suse 10.3, scan hangs, taints kernel. Jonny B wrote: On Mon, Mar 17, 2008 at 5:31 AM, Jonny B [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: 2008/3/16 Mark A Jenks [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]: Not sure what is happening here. I'm about to rebuild the box again and see if it works before I install everything that I did to it. Here is what I have so far.. Thoughts? I was thinking sensors (k8temp, it87), but I removed them, and it stil happens. -Mark Is this based on the very latest src from linuxtv.org? If not, try it and report back. Thanks, Steve ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] HVR-1250, Suse 10.3, scan hangs, taints kernel.
I'm compiling 2.4.24 right now to test it. I've been running this box for over a year with a TV2000 card without issues. I was just trying to upgrade into DTV. So, I really don't think it's a memory issue. The TV2000 was a pci, this is my first pcie card I'm using in this box. -Mark -Original Message- From: Steven Toth [mailto:[EMAIL PROTECTED] Sent: Monday, March 17, 2008 1:18 PM To: Mark A Jenks; linux-dvb Subject: Re: [linux-dvb] HVR-1250, Suse 10.3, scan hangs, taints kernel. CC'ing the mailing list back in. Mark A Jenks wrote: Do you think I should push the kernel to 2.6.25? I maintain the driver on ubuntu 7.10, which I think has is 2.6.22-14 - or close to. I have another AMD system at home that the driver completely freezes on, no idea why, total system lockup. I don't trust the PCIe chipset on it, it's an early chipset and a little flakey. Other than that the driver's been pretty reliable. Lots of noise recently on the mailing lists about video_buf related issues and potential race conditions. Try running the system with a single cpu core and report back, also, just for the hell of it, run memtest also. - Steve ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] HVR-1250, Suse 10.3, scan hangs, taints kernel.
SUCCESS! Built 2.6.24-3 and installed it. Recompiled CVS, and installed it. Now it doesn't hang when it finds a signal. -Mark -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark A Jenks Sent: Monday, March 17, 2008 1:28 PM To: Steven Toth; linux-dvb Subject: Re: [linux-dvb] HVR-1250, Suse 10.3, scan hangs, taints kernel. I'm compiling 2.4.24 right now to test it. I've been running this box for over a year with a TV2000 card without issues. I was just trying to upgrade into DTV. So, I really don't think it's a memory issue. The TV2000 was a pci, this is my first pcie card I'm using in this box. -Mark -Original Message- From: Steven Toth [mailto:[EMAIL PROTECTED] Sent: Monday, March 17, 2008 1:18 PM To: Mark A Jenks; linux-dvb Subject: Re: [linux-dvb] HVR-1250, Suse 10.3, scan hangs, taints kernel. CC'ing the mailing list back in. Mark A Jenks wrote: Do you think I should push the kernel to 2.6.25? I maintain the driver on ubuntu 7.10, which I think has is 2.6.22-14 - or close to. I have another AMD system at home that the driver completely freezes on, no idea why, total system lockup. I don't trust the PCIe chipset on it, it's an early chipset and a little flakey. Other than that the driver's been pretty reliable. Lots of noise recently on the mailing lists about video_buf related issues and potential race conditions. Try running the system with a single cpu core and report back, also, just for the hell of it, run memtest also. - Steve ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb