___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Dominik
signature.asc
Description: This is a digitally signed message part.
___
linux-dvb mailing list
linux-dvb
Hi,
The attached pctv452e.c works for me without frame drops in DVB-S and DVB-S2.
On Friday 29 February 2008, Manu Abraham wrote:
Dominik Kuhlen wrote:
On Friday 22 February 2008, Dominik Kuhlen wrote:
Hi,
-snip
Great, that was the trick, now scanning and szap work fine
On Friday 22 February 2008, Dominik Kuhlen wrote:
Hi,
-snip
Great, that was the trick, now scanning and szap work fine.
Thanks for that hint!
You're welcome.
BTW: do you receive broken streams (symbol rate 22000 or 27500)?
Currently I get a loss of about 1 TS packet
).
And there is exactly one TS packet missing (I diffed a TS hexdump).
If it were the USB controller that drops packets it would be a loss of 5
consecutive TS packets. (940 bytes iso frame size)
Thanks for testing,
Dominik
signature.asc
Description: This is a digitally signed message part
try this and report if it works for you too.
Dominik
signature.asc
Description: This is a digitally signed message part.
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
successfully initialized and connected.
/snip
But there is no frontend loaded:
This results from not being able to attach the frontend chip in the driver (see
above)
Dominik
signature.asc
Description: This is a digitally signed message part
But I had no luck to tune to 11.722GHz (Pro7) so far (maybe some values are
hardcoded to 27500kSym/s).
Typo: that should be: 12.722GHz
signature.asc
Description: This is a digitally signed message part.
___
linux-dvb mailing list
Hi all,
without this patch a non-debug compilation fails.
Regards
Dominik
diff -r 0b99a85c0aa5 linux/drivers/media/video/bt8xx/bttv-driver.c
--- a/linux/drivers/media/video/bt8xx/bttv-driver.c Sat Jan 5 18:55:37
2008 -0200
+++ b/linux/drivers/media/video/bt8xx/bttv-driver.c Sun Jan
Hi all,
I searched a way to make the remote of the gigabyte u7000 working.
Looking at /var/log/messages when pressing the remote keys give me that
list, but I don't know how to get farther :
/* Key codes for the Gigbyte U7000 , look a little bit funny
compared to the previous ones */
Thanks to Olivier,
I was trying to get it working but I did a mistake putting the cards in
the generic section. Putting it in stk section did it :-)
I got it to work. I attached the hg diff.
Using dvb-apps from hg gives me a Unable to query frontend status.
For scanning, I'm using gentoo ebuild
Sorry for spamming and replying in the wrong place,
I did forget the attached file
@+
dom
diff -r a4122c9c5a5d linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
--- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c Thu Nov 01 22:52:58 2007 -0200
+++
-snip-
at this point I'm not sure if it's because I'm using an amd64 system (perhaps
non friendly 64bit code somewhere) or if the channel I'm trying to tune to is
wrong in channels.conf
I'm also using 64-bit kernel and system, there shouldn't be issues due to this.
Dominik
with the logs i get. (or send it directly to me if it's too
large for the mailing-list.)
NRJ:11538:v:0:22000:608:628:6908
succ: 99 | fail: 1
That's great news :)
Quite clear results... ;)
According to Dominik, DVB-S2 doesn't work (yet) with his driver. So the
above result
work.
Dominik
pgpQjHHDWS5JE.pgp
Description: PGP signature
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
);
in the stb0899_sleep() function.
(this should be somehow limited to the pctv452e as the GPIOs might
have different meanings on other devices)
Dominik
pgpg3kmyC8iiz.pgp
Description: PGP signature
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org
{ STB0899_I2CRPT, 0x5e }, // 0x2c
to
{ STB0899_I2CRPT, 0x58 },
as register 0xf12a is STB0899_I2CRPT and 0x5c should not appear there.
(this is not included in my posted patch)
Dominik
pgpHsmG0UUmNL.pgp
Description: PGP signature
On Wednesday 24 October 2007 01:42, [EMAIL PROTECTED] wrote:
I've been working on one of these myself
but you've beat me to it :)
I was in the middle up updating the init registers on the Sunday when I
spotted this mail on the list
:)
still I might have some useful info / input
to begin
transponders so far. But i haven't played too
much yet either.
This is what i'm going to do next.
And, next days, i'll take the device to work where i have access to a full
Astra/Eutelsat DiSEqC dish.
Is (reliable) tuning a (well known) problem with the stb0899 devices?
Dominik
pgpKRHu0EjF2i.pgp
interests... :)
please send me all known information about the device and let me know
about exiting code (Dominik? Roland? Patrick? anybody?)
Here it is:
A new try for a driver for the pctv452e usb device.
What's working:
- Remote control
- LNB control (14/18v, 22kHz)
- DiSEqC
What's not working
On Sunday 21 October 2007 18:00, Dominik Kuhlen wrote:
Hi,
On Thursday 18 October 2007 09:54, Daniel Golle wrote:
hi all!
i finally got the pinnacle device mentioned above, willing to
contribute whatever i can to make it work under linux. As I have to
study USB programming as a part
a hexdump of that packet?
thanks,
Dominik
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
not try to configre/compile the drivers in this dir hence
this problem did not occur in my setup.
I linked all files in linux/ to a stock kernel and called
make menuconfig;make modules in that kernel dir.
Nevertheless the attached patch should fix this issue.
Dominik
Index: linux/drivers/media/dvb
in advance,
Jimmy Hedman
But this is no explanation why your device generates so many interrupts:-(
Probably max packet size=128.
Dominik
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
- some parts are hacked to DVB-S
- legacy ioctl FE_SET_FRONTEND not supported, use DVBFE_SET_PARAMS.
- reading sections and watching tv works, so all should work.
This stuff comes with no warranty, if you trash some or all of
your equipment its your problem ;-)
Dominik
)
There are only two function pointer in dvb_frontend_ops which handle LNB power.
The new options would require at least one more.
The most flexible way would be a generic set_lnb_power_feature function.
Don't know whether someone needs this but you'll never know:-)
Any comments are welcome,
Dominik
register configuration for the stb0899 from this
file.
Or compare them with the values Manu (or the data sheets) suggests.
Thanks for your support,
Dominik
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo
Hi,
On Friday 22 September 2006 13:15, Roland Mieslinger wrote:
Hi Dominik,
looks like we're doing the same. I've started a driver for pctv452 too, but
belive that I'm a bit behind (I can only init the device on usb connect).
I use the init values from stb0899 driver, I think there should
Hi,
would be great to see what you have done so far.
My work was based on dvb-ttpci, which is not
utilizing dvb-usb-framework.
So, currently I'm migrating to dvb-usb-.
(which I should have done earlier:-)
If I have proceeded to a more or less usable state
I'll post my work here.
Dominik
initialization which has to be done before any
other stuff? I didnt find some kind of init() function in dvb_usb_properties
Thanks for this nice framework, it makes life much easier!
Dominik
my_pctv452e_01.patch.bz2
Description: BZip2 compressed data
,
Dominik
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
?
Thanks for your help,
Dominik
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb as
subject.
hours without finding the error. I assumed it
was in a different place and thought the sanitiy checks in
urb.c were passed by the ttusb-urb[i] structures and the
error came from uhci... bad I looked in the wrong place.
Anyway, nice that it's working now.
Dominik
--
Info:
To unsubscribe
2.6.1 it's working now thanks to Alex' patch idea,
courious, that the grundig frontend isn't registered under
2.4.24 in this situation. But now I got it running.
Thanks for your reply anyway,
Dominik
--
Dominik Roettsches
[EMAIL PROTECTED]
--
Info:
To unsubscribe send a mail to [EMAIL
support is on, uhci-usb is loaded and kernel
version is 2.4.24.
It would be nice if someone had an idea on this?
Thanks for your help,
Dominik
PS: Anyone any hint on the failed urb submission problem posted
before? Is there using someone Nova USB -s under 2.6
successfully
under 2.6.x?
I'd be very glad, if anyone has some idea how to get rid of
this problem, thanks for your help in advance.
Dominik
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb as
subject.
$(AV7110_FIRMWARE_PRESENT)
./fdump $(AV7110_FIRMWARE_PRESENT) dvb_ttpci_fw $@
av7110.o: av7110_firm.h
Regards
Dominik
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb as
subject.
85 fcoms 0x850f02ce(%esi)
Code; ce97a212 [saa7146_vv]saa7146_res_free+32/100
11: 91xchg %eax,%ecx
Should I provide more info ?
Regards
Dominik
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb as
subject.
Michael Hunold wrote:
Hello Dominik,
Hello Michael,
with your latest changes, xawtv recognizes the tuner.
The picture is only black (but I expected this as your latest checkin
commment talks about non working behavior), overlay doesn't work .
xawtv prints:
ioctl: VIDIOC_OVERLAY(int=1): Resource
is, that the tuning seems to be a little
bit off for some TV stations as the sound is very sluggish for them.
Regards
Dominik
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb as
subject.
Dominik Strasser wrote:
Johannes Stezenbach wrote:
Michael Klapproth wrote:
I've updated with cvs -z3 update -dAP and now i have no picture for
analog tv :-(
Which means it did work before?
Hi Johannes and Michael,
as it was raining, my weekend was boring, too :-).
So I dug into the driver why
Michael Hunold wrote:
Hello Dominik,
So I dug into the driver why xawtv didn't work for me (while it had
worked at some time).
Please submit a bug report then. Didn't work isn't very precise. ;-)
As I said it didn't tune. If V4L2_CAP_TUNER isn't set, the xawtv skips
tuning.
xawtv -v 2 gives
, you can go ahead test
it. Patches are always welcome. 8-)
Anyway. Great work.
Regards
Dominik
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb as
subject.
changed some other tihngs too)
but this problem occurs only if the PIDs
is larger than 0x0fff
please correct me if I'm wrong
Dominik Kuhlen
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb as
subject.
of mplayer)
thanks
Dominik Kuhlen
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb as
subject.
44 matches
Mail list logo
