has a lot of problems to lock with megasky qt1010 module with this
hardware at least broadcasting standards used in Finland. I will try to
fix this later...
Feedback, bug/success reports are highly welcome.
Best regards
Antti Palosaari
diff -urNp --exclude=.version --exclude=Module.symvers
hi,
let's try again. Attached patch remains unchanged.
Signed-off-by: Antti Palosaari [EMAIL PROTECTED]
/antti
Antti Palosaari wrote:
Hi,
This patch adds driver for Sigmatek DVB-110 USB DVB-T stick. Stick has
based on hardware of Qtuantek QT1010 tuner, Zarlink ZL10353 (Intel CE
6353
heippa!
here comes test report:
HW: Megasky GL861 and Sigmatek DVB-110 au6610.
freqs: fi-Oulu
Note: My Megasky gives following errors kernel: zl10353_read_register:
readreg error (reg=8, ret==0). This only happens my 'fast' (Athlon X2
3800+) computer, not in older and slower laptop. I checked
unneeded code due to proper i2c_gate_ctrl
GL861:
- remove unneeded code due to proper i2c_gate_ctrl
Regards Antti Palosaari
--
|||
(0-0)
-oOO--(_)--OOo
tel. +358 40 535 7322 | MSN Messenger [EMAIL PROTECTED
moikka!
Take 2. Same patch generated against different tree, this one is for
http://linuxtv.org/hg/~mkrufky/megasky.new . All other information from
previous mail applies to this patch also.
Signed-off-by: Antti Palosaari [EMAIL PROTECTED]
Regards Antti
Antti Palosaari wrote:
moro
Christopher Pascoe wrote:
ZL10353:
- implement i2c_gate_ctrl
This looks to be OK, but I haven't had an opportunity to test it yet.
- change one reset_attach register to same as main v4l-dvb tree
Hmm, what do you mean?
oops, this was due to fix made for gl861 by comabug... I didn't find
assume that there is still a slight
calculation error. I did simple openoffice spreadsheet to calculate
nominal rate, try it and find correct formula :)
http://otit.fi/~crope/v4l-dvb/zl10353/zl10535_trl_nominal_rate_calculator.ods
Signed-off-by: Antti Palosaari [EMAIL PROTECTED]
Regards Antti
values in case of different
xtal. Does someone have a stick with zl10353 demod and different xtal?
Tested successfully with au6610 gl861 against fi-Oulu frequencies.
Signed-off-by: Antti Palosaari [EMAIL PROTECTED]
Regards Antti Palosaari
Antti Palosaari wrote:
heippa!
Implement trl nominal
Marc wrote:
The damn thing is that the cinergy T2 works out of the box with fedora
core6, nd does not work with .. ubuntu..
Probably there is newer kernel in Fedora Core. Install newest drivers
from http://linuxtv.org/hg/v4l-dvb to Ubuntu.
/antti
Nick Bruton wrote:
Hi,
Does anyone know why I can't receive ALL the same channels when my DVB-T
is plugged into a windowsxp system or openSUSE10.2 system (using kaffeine).
I can receive TMF fine on my xp system but not at all on my suse box
(both systems are side-by-side and using exactly
Franchini Roberto kirjoitti:
File not found: /lib/modules/2.6.18-1.2798.fc6/build/.config at
./scripts/make_kconfig.pl line 30.
Kernel headers are missing. Install package kernel-devel (or was it
kernel-headers).
/antti
--
|||
(0-0)
moi!
I have also seen this problem with my fast machine. It disappeared
when I added some sleep to Zarlink zl10535 module. Looks like timing
problems... I2C messages targeted to demodulator are sent too fast.
/antti
[EMAIL PROTECTED] kirjoitti:
Thx mate works great now! Couldn't have done
you test and report if it works. If still
timeouts after the patch then try to add more delay [udelay(10)].
Signed-off-by: Antti Palosaari [EMAIL PROTECTED]
--
|||
(0-0)
-oOO--(_)--OOo
tel. +358 40 535 7322 | MSN
moi
Could you test to add one i2c write to zl10535 code as Jan has done:
http://linuxtv.org/pipermail/linux-dvb/2007-January/015518.html
http://linuxtv.org/pipermail/linux-dvb/2007-January/015544.html
This IO bit has something to do with QT1010 tuner AGC (QT1010 has AGC
support Both wide-band
moi,
looks good!
Acked-by: Antti Palosaari [EMAIL PROTECTED]
Regards Antti
Aapo Tahkola kirjoitti:
Add support for A-LINK DTU dvb-t adapter.
Support for A-LINK DTU(m) is not included in this patch.
Signed-off-by: Aapo Tahkola [EMAIL PROTECTED
hi,
broadcasting started at 1.5.2007.
/antti
--
|||
(0-0)
-oOO--(_)--OOo
tel. +358 40 535 7322 | MSN Messenger [EMAIL PROTECTED] | www.palosaari.fi
-Kahta asiaa en ymmärrä.. C-kielen syntaksi ja naisten logiikka..
#
moi,
Looks like there has been done some channel changes or teracom www-page
is not updated recently. Attached tuning file is as channels are just
now (have been at least one month or more...). I am not sure whether or
not 738 MHz is reserved. Currently there is no transmission in that
heips!
Thanks for the correction. Attached tuning file is now corrected, 738
MHz dropped entirely now.
/antti
Peter Fassberg kirjoitti:
Hi Antti!
Looks like there has been done some channel changes or teracom www-page
is not updated recently. Attached tuning file is as channels are just
I will put those under the
agc2-config-switch and send this patch again later. Any ideas are welcome :)
Patch is done against current gl861 devel tree at
http://linuxtv.org/hg/~aapot/gl861/ .
Thanks for Markus and Aapo for helping!
Regards Antti
Signed-off-by: Antti Palosaari [EMAIL PROTECTED
Nico Sabbi kirjoitti:
Hi,
can anyone tune VHF with this tuner? Using a friend's MSI Megasky 580
I can't, although the signals of three different transmitters are very
strong here.
Tuning to UHF works pretty well.
Are there limitations with this tuner?
There is no limitations in tuner hw,
hello!
Ok, few words about the current development driver.
There is three modules now:
* dvb_usb_af9015 (just typical dvb-usb stuff; usb-driver, IR-stuff,
usb-controller stuff, i2c-bus, pid-filtering, endpoint configuration)
* af9013 (this is demodulator driver, I put this own module, in my
hi,
Roland Marcus Rutschmann wrote:
With another dvb-t stick under linux and the MSI Mega Sky under Windows I get
11 Programms in 3 frequency-bands, with MSI under Linux I cannot tune to the
3 programms of the frequency-band around 530MHz. Other frequencies work fine.
Known problem.
Thomas Bartschies wrote:
So can one help me to further investigate? May be even to dump the device for
further
information?
Look at the *.inf files. Usually it reveals almost everything. Also
dumping string from those *.sys files shows some information from driver
compilation, libraries
Timo Jyrinki wrote:
I've access to one unused Anysee E30 Plus DVB-C USB adapter, which is
useless to me without Linux support. Is there anyone eg. in Europe
who'd be willing to receive the adapter by mail and thinks he/she
could possibly put together a support (eventually)?
Timo lent his
Manu Abraham wrote:
Tuner is simple PLL that is controlled as usual by four bytes. Anyhow,
it would be nice to know the name of tuner IC. I opened metal can and
there is one IC S A5360 / C1432. I think S could mean IC manufacturer,
probably Samsung. Is that tuner IC or some other IC needed
e95ee8dec49d linux/drivers/media/dvb/dvb-usb/anysee.c
--- /dev/null Thu Jan 01 00:00:00 1970 +
+++ b/linux/drivers/media/dvb/dvb-usb/anysee.c Sat Oct 06 02:21:40 2007 +0300
@@ -0,0 +1,301 @@
+/* DVB USB Linux driver for Anysee E30C DVB-C USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari [EMAIL
TDA10023 options configurable
- add Anysee E30 DVB-T device support
- add Common Interface (CI) support
- fixes overall
Please test and report whether or not it works.
Regards,
Antti
Antti Palosaari wrote:
terve
First version of the driver is attached. It does not have remote control
, nor CI support
and board id output is:
02 02 01
So it seems to be the same as reported by models with MT352?
BR,
Heikki
Antti Palosaari wrote:
Terve Heikki others
Thank you for reporting. That was not a big surprise because MT352 is
replaced by MT353 aka ZL10353. I have got logs from zl10353 Anysee E30
/anysee/
It would be nice to add support for Anysee DVB-S devices also...
Regards,
Antti Palosaari
Michael Krufky wrote:
Antti Palosaari wrote:
heips,
hmm, now I am a little bit confused because there is this same id as MT352
board. Maybe this is not just board id, but some other value
Terve,
Should we use city name or network operator name in DVB-C network file
names. As example this SSP (Salon Seudun puhelin) is located in city
called Salo. Can we put same file with both names using symbolic linking?
Regards,
Antti
# DVB-C Channels in Salo (Finland)
# SSP (Salon Seudun
if it is wise at all to add development
networks (network configuration can change and file is not up to date)
to dvb-apps. Maybe it helps Nokia engineers ;)
Regards
Antti Palosaari
--
|||
(0-0)
-oOO--(_)--OOo-
http
hello,
I just test with A-Link DTU(m) in Finland and drivers seems to work.
Regards
Antti Palosaari
Arris [ML] wrote:
keywords: af9015 linux working driver usb id 15a4:9016
stupid typo, sry
___
linux-dvb mailing list
linux-dvb@linuxtv.org
heis,
Can you say what are used modules or device usb-id? Demodulator seems to
be zl10353, but what are tuner and usb-bridge (probably tuner qt1010?
and usb-bridge gl861 or m9206?).
regards
Antti
Dag Nygren wrote:
Still more info on this issue:
Downloaded and compiled the newest CVS
it has been tested. Reports can be send directly to my mail if
subscription to linux-dvb mailing list is too big task :)
Regards
Antti Palosaari
Mauro Carvalho Chehab wrote:
Hi Tuomas,
I'm sorry to interrupt you like this, because I have only one tiny question.
When those Anysee E30
hello
There is file containing reference channels used in 3KTV networks around
the Finland. There is about 20 3KTV networks but all didn't use exactly
same channel list for reason or other.
Now there is fi-Rauma and fi-Salo that contains same channels, should
those removed?
fi-3ktv
moikka
known problems... we are working for fix this. Current situation of this
driver is that i2c-bus implementation is broken. And I like that current
implementation is far too complex too :) Communication is done just
sending BULK packet to EP2 and after that receive reply from EP1 like
moi
attached patch should fix it. I have been too busy to find proper
solution for ZL10353, though I now know how it should be done.
regards
Antti Palosaari
Dag Nygren wrote:
Hi again,
is there anything I can do to help debugging the
A-link DTU USB stick Tuning failed problem?
The stick
Dag Nygren wrote:
Citerar Antti Palosaari [EMAIL PROTECTED]:
moi
attached patch should fix it. I have been too busy to find proper
solution for ZL10353, though I now know how it should be done.
Thank you very much.
it worked?
On question though:
To what incarnation of the driver tree
Christoph Pfister wrote:
Hi,
(sorry for the late reply)
no problem :)
Am Dienstag 13 November 2007 schrieb Antti Palosaari:
hello
There is file containing reference channels used in 3KTV networks around
the Finland. There is about 20 3KTV networks but all didn't use exactly
same channel
morjens
I put my version also online if there is someone who wants to play with
it. Many Finnish people have reported it working very well with A-Link
DTU(m) and Fujitech stick. No any success reports outside Finland still...
Latest firmware, version 4.95.0, and the driver patch can be found
Lindsay Mathieson wrote:
Antti Palosaari wrote:
morjens
I put my version also online if there is someone who wants to play
with it. Many Finnish people have reported it working very well with
A-Link DTU(m) and Fujitech stick. No any success reports outside
Finland still...
Latest
Yousef Lamlum wrote:
Could anyone please point me in the right direction with regards to
adding a patch to the the v4l-dvb project? Yesterday I added support for
the Artec T14BR and would like to share these minor changes with the
rest of the community.
If it is only minor change adding new
Lindsay Mathieson wrote:
Antti Palosaari wrote:
LindsYour stick uses most likely tuners from Maxilinear. This driver
supports only AF9015 reference with MT2060 and MT2061F tuners. Manu's
tree should support your stick. But if there is really AF9015 it
should dump at least some information
Diego wrote:
Thank you for reporting.
I supposed that patch its for .23 kernels right? I change the sources on
default Ubuntu kernel (2.6.22) for get that your driver working on this
kernel (got errors when patching and want other module supports that .23 dont
give me atm) and works.
Patch
Diego wrote:
Yep hangs when got errors in picture but its rare...
Many DVB-sticks has problems when signal goes weak, maybe it is issue
that can be handled and fixed with driver. I haven't looked this more...
About changing channels perhaps its that (low signal) because some channels
change
moi
problems reported should be fixed now, please test.
http://linuxtv.org/hg/~anttip/af9015/
regards
Antti
Antti Palosaari wrote:
Diego wrote:
Yep hangs when got errors in picture but its rare...
Many DVB-sticks has problems when signal goes weak, maybe it is issue
that can be handled
Christoph Pfister wrote:
2007/11/22, Antti Palosaari [EMAIL PROTECTED]:
hei
I got current channel list from operator and make update files against
it. New tuning files attached. There is also list I got from the operator.
List of all 3KTV networks and proper tuning file:
operator reference
Diego wrote:
On Wed, 28 Nov 2007 01:40:01 +0200
Antti Palosaari [EMAIL PROTECTED] wrote:
moi
problems reported should be fixed now, please test.
http://linuxtv.org/hg/~anttip/af9015/
Something are broke in that sources. Check attach.
Errors seen in log provided are most likely your
Thorsten Jordan wrote:
i have bought a Typhoon Movie Stick that is sold with different
hardware in it. I got one with Afatech 9016 device (USB id 15a4:9016),
which i got partly to work with the driver from afatech itself (the one
that comes with patched linux-dvb-tree).
The problem: the
Thorsten Jordan wrote:
Antti Palosaari wrote:
Thorsten Jordan wrote:
i have bought a Typhoon Movie Stick that is sold with different
hardware in it. I got one with Afatech 9016 device (USB id 15a4:9016),
which i got partly to work with the driver from afatech itself (the one
that comes
Thank you for reporting. Manu's driver is different one as used by you.
Tim Hewett wrote:
The Equinux TubeStick (USB2 DVB-T device for MacOS X) work great with
the AF9015 patched drivers. I had to alter the second part of the USB
ID from 0x9016 to 0x9015 to make it be recognised, but after
hi,
Looks like it is almost working :)
Román wrote:
.stream = {
.type = USB_ISOC,
.count = 6,
.endpoint = 0x81,
.u = {
.isoc = {
.framesperurb = 1,
.framesize = 564,
.interval = 150,
can you try to put sleep (10ms?) before / after usb-message sending to
see if it helps? There has been some discussion similar problem before
with faster machines.
Regards
Antti
Nico Sabbi wrote:
Hi,
in the past my MSI MegaSky 580 used to work decently,
but in recent Fedora 8 kernels such
Nico Sabbi wrote:
Il Saturday 22 December 2007 18:43:01 Antti Palosaari ha scritto:
can you try to put sleep (10ms?) before / after usb-message sending
to see if it helps? There has been some discussion similar problem
before with faster machines.
msleep(10) only in gl861_i2c_msg() seems
Antti Palosaari wrote:
Sounds weird. I will test this later tonight.
I cannot see any problem.
Here is module versions I have:
[EMAIL PROTECTED] ~]# uname -a
Linux localhost.localdomain 2.6.23.9-85.fc8 #1 SMP Fri Dec 7 15:49:36
EST 2007 x86_64 x86_64 x86_64 GNU/Linux
[EMAIL PROTECTED
Nico Sabbi wrote:
Antti, may I ask why that patch isn't integrated yet?
Mostly because I didn't know how to handle / put configurable zl10353
changes. There was registers we don't know meaning. But now I think
those can be set behind rf-agc configuration option. Don't know if there
is someone
Luca Olivetti wrote:
En/na Steven Toth ha escrit:
Personally, I don't knw much about our USB v4l trees, or whether it will
be simple enough to add (atleast analog) support. Looks like digital
might be done via the AF9013, but that's a guess and I'm not familiar
with it, I think this is
hello
How I can make diff from changeset X1 to changeset X2?
Without parameters hg diff shows only changes done after latest commit.
regards
Antti Palosaari
--
http://palosaari.fi/
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http
[EMAIL PROTECTED] wrote:
The stick's tuner is actually marked MT2061F. A part not listed on
Microtune's website or in the Realtek or linux-dvb MT2060 drivers.
Has anyone got any information on the MT2061, specifically how it may
differ from the MT2060? Or any suggestions how I may find
/af9015_firmware_cutter/firmware_files/
regards
Antti Palosaari
# lsusb -v -s 5:10
Bus 005 Device 010: ID 15a4:9016
Device Descriptor:
bLength18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass0 (Defined at Interface level)
bDeviceSubClass 0
://linuxtv.org/hg/~anttip/anysee/rev/48e353f35989
regards
Antti Palosaari
--
http://palosaari.fi/
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
moikka
I have also this device (express card). I haven't looked inside yet, but
I think there is DibCOM STK7700D (in my understanding dual demod chip)
and only *one* MT2266 tuner. I tried various GPIO settings but no luck yet.
GPIO6 is for MT2266.
GPIO9 and GPIO10 are for frontend.
Looks like
it must use the same frontend description as asus cards.
Albert
2008/2/18, Antti Palosaari [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]:
moikka
I have also this device (express card). I haven't looked inside yet, but
I think there is DibCOM STK7700D (in my understanding dual demod chip
days ago, but I think it's not on the current sources. I send
again the
patch. Basically it must use the same frontend description as
asus cards.
Albert
2008/2/18, Antti Palosaari [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED
Albert Comerma wrote:
It seems ok. Could you test a scan with kaffeine instead of looking for
a specific location? And if you do so it reports signal strenght?
Kaffeine reports 100% signal strength. There must be some setting wrong
in the driver. Tuner locks to the correct frequency but
Albert Comerma wrote:
Is it a coincidence, but there have been updates in kaffeine
(0.8.5-35.pm http://0.8.5-35.pm) (libxine1, libxine1-dvb version:
1.1.9-1-0.pm http://1.1.9-1-0.pm , for example) and since then
everything works. To be confirmed in time.
So please try if you can use
Jarryd Beck wrote:
I think that the tda18271 driver will work with your tuner, but we may
need to make some small adjustments. If you look in tda18271-fe.c ,
you'll find the code that autodetects between a TDA18271c1 and a
TDA18271c2 ...
I just realised there's a problem with versions
Jarryd Beck wrote:
That didn't work, the problem is I can't tell where it's going wrong and
I don't understand usb sniffs. I have a few questions:
When af9015 reads the tuner, the existing tuners set the spectral
inversion state-gpio3. Do you know what state-gpio3 does?
It connects tuner,
hello
I looked sniffs and find correct demodulator initialization values for
this NXP tuner. Copy paste correct table from attached file and try.
Hopefully it works. I compared your sniff to mt2060 and qt1010 based
devices and there was still some minor differences to check.
regards,
Antti
Jarryd Beck wrote:
I found the problem, the driver I had set .no_reconnect = 1 in
af9015_properties, the one in af9015_new didn't. So after I changed
that I tried again, it still didn't work. I enabled debugging and tried
to tune to a channel and this is what I got in dmesg.
I know this
Jarryd Beck wrote:
and when I try to tune it I get this:
af9013_init
af9013_reset
af9013_power_ctrl: onoff:1
af9013_set_adc_ctrl: adc_clock:28000
af913_div: a:2800 b:100 x:19
af913_div: a:0 b:100 x:19 r:14680064 r:e0
af9013_init: load ofsm settings
af9013_init: load
Michael Krufky wrote:
This all happens very quickly on the hardware that I've tested ( a
cx23887-based pcie card and a cypress fx2-based usb device). I've also
heard good reports on saa713x-based pci cards. Is the i2c slow in the
af9013 driver?
I will check this later, probably it is
Jarryd Beck wrote:
Somewhere along the way demod_address in a struct is set to AF9015_I2C_DEMOD
which is 0x38. Is that what you wanted?
No, it is demodulator i2c-address.
Antti
--
http://palosaari.fi/
___
linux-dvb mailing list
looks like possible bug found!
Jarryd Beck wrote:
On Fri, Mar 14, 2008 at 2:19 PM, Michael Krufky [EMAIL PROTECTED] wrote:
This all happens very quickly on the hardware that I've tested ( a
cx23887-based pcie card and a cypress fx2-based usb device). I've also
heard good reports on
Michael Krufky wrote:
4.3 is not close enough to 3.8. If you don't know how to set the demod
to 3.8, then we can do some hacks to make it work, but signal reception
is likely to be very poor -- better off looking in his snoop log to see
how the windows driver sets the demod to 3.8
OI have
forgot attach patch...
Antti Palosaari wrote:
Michael Krufky wrote:
4.3 is not close enough to 3.8. If you don't know how to set the demod
to 3.8, then we can do some hacks to make it work, but signal reception
is likely to be very poor -- better off looking in his snoop log to see
how
Jarryd Beck wrote:
Michael's patch didn't produce any interesting dmesg output. I included
dmesg for plugging in and tuning with antti's patch.
First errors came from same situation as earlier, no_reconnect. But it
finally still worked.
Just realised I didn't have debug enabled for
Jarryd Beck wrote:
On Sun, Mar 16, 2008 at 1:22 AM, Antti Palosaari [EMAIL PROTECTED] wrote:
Frequency control values of the demodulator seems to be ok now. Also adc
and coeff looks correct. It is hard to say where is problem...
Can you test if demodulator can detect TPS parameter automatically
Jarryd Beck wrote:
Here's the first frequency it tuned to, as you can see the
one you set auto on is still auto, it didn't seem to autodetect
anything. It was the same for all the other frequencies as well.
tune to:
problem. Any ideas to
resolving it is highly welcome.
regards
Antti Palosaari
--
http://palosaari.fi/
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Jarryd Beck wrote:
Also there's a blue light that comes on in windows when I tune, but it didn't
come on in linux when tuned. Would it be possible to work
out how to make that light come on when it has successfully tuned?
Should be peace of cake to fix. I will check it later...
Antti
--
insomniac wrote:
The .inf should be this: http://rafb.net/p/8ideWc93.html
Anyway, can you point me out what is the module for such chipset? If
it's included in the mainstream kernel, or if I need to get it
separately. I have read about bttv.ko, but I'm not sure wheter it worked
for me or
insomniac wrote:
On Mon, 17 Mar 2008 03:57:29 +0200
Antti Palosaari [EMAIL PROTECTED] wrote:
I think it is not correct driver .inf file. inf-file you have is for
Pinnacle PCTV 72e with product ID 0236 and lsusb you have has product
ID 0237.
You are right. Here is the correct (I think) .inf
Michael Krufky wrote:
Jarryd Beck wrote:
Takes half a minute to load when plugging in, keyboard is slow to respond
when tuning, and I get lots of this:
af9013_i2c_gate_ctrl: enable:0
af9013_i2c_gate_ctrl: enable:1
Applied the patch again and it was all fine.
Jarryd.
Thanks for the
Albert Comerma wrote:
Hi all, having a look to the pinnacle card of Andrea Barberio, we find
out that it uses a dib7770-PA with integrated tuner. It seems to load
correctly the firmware but we don't know how to comunicate with the
tuner. Anybody knows which tuner we should use? and if we
insomniac wrote:
On Tue, 18 Mar 2008 16:38:12 +0100
insomniac [EMAIL PROTECTED] wrote:
On Tue, 18 Mar 2008 17:16:20 +0200
Antti Palosaari [EMAIL PROTECTED] wrote:
dib7770 is 3 in 1 solution, usb-bridge + demodulator + tuner. You
can try dib7070 tuner driver. STK7070P looks rather similar
86 matches
Mail list logo
