Dave Schile wrote:
Well, I tried different compiles and saw nothing different. I found
that this LNB uses an oscillator running at 11.25 GHz. So I put these
lines in the dvb_defaults.h file for dvbtune:
/* DVB-S */
// With a diseqc system you may need different values per LNB. I hope
I don't fully understand the real electrical/RF implications of circular
left/right vs linear horizontal/vertical other than to say that it's
related to how the signal is sent (polarised) from the satellite (it's
polarisation) and that you have to have a matching LNB of the same
Unfortunately I dont know much about the LNB. I went and remove it from the
dish but the identification sticker has worn away. It came from a common 18
inch DirecTV dish. there are two LNB's in there, I think, because there are
two coax outs. I'm only using one at the moment because I
Well, I tried different compiles and saw nothing different. I found that
this LNB uses an oscillator running at 11.25 GHz. So I put these lines in
the dvb_defaults.h file for dvbtune:
/* DVB-S */
// With a diseqc system you may need different values per LNB. I hope
// no-one ever asks for
// With a diseqc system you may need different values per LNB. I hope
// no-one ever asks for that :-)
#define SLOF (11700*1000UL)
#define LOF1 (11250*1000UL)
#define LOF2 (11250*1000UL)
is that right?
Yes.
Still, the unit seems not to tune at all. I keep thinking I'm missing