Hi,
Since some days, I cannot update my apt-repos anymore, because of
problems with the FAI-key:
W: GPG error: http://fai-project.org wheezy Release: The following
signatures were invalid: BADSIG DC13E54EAB9B66FD Thomas Lange
la...@debian.org
I just downloaded and added Thomas' new FAI
Thanks a lot!
Now it works again!
Regards
René
On 02/03/2014 02:30 PM, Thomas Lange wrote:
On Thu, 30 Jan 2014 09:01:13 +0100, René Bleisch accou...@climate.unibe.ch
said:
W: GPG error: http://fai-project.org wheezy Release: The following signatures
were invalid: BADSIG
Just a comment to the new release.
As I perfromed a softupdate on all my clients, the FAI-client was also
updated to 4.1 on each client.
In the following, I ran into problems, because task_finish is now also
executed during softupdates (see also changelog).
In my case, I have a hook-script
Hi,
I use multi-arch support since quite some time and never got error or
warning messages.
Thats my script:
echo Enable multiarch support
$ROOTCMD dpkg --add-architecture i386
$ROOTCMD apt-get update
$ROOTCMD apt-get install -y --force-yes ia32-libs
echo Install Adobe
type awk script,
ASCII text.
- Does anyone also have this problem?
- Does anyone have a solution?
(I will also try to find one by myself)
Regards
René Bleisch
of
the script (in a copy, of course) and see if file starts detecting
correctly after some specific part of the script is gone.
If you can show what exactly causes it, you may file a bug against
file in Debian BTS.
Toomas
On Fri, 2014-03-21 at 12:06 +0100, René Bleisch wrote:
Hi,
Apparently
Hi Robert,
I was faster than you :-( (should have informed fai-mailing)
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=742262
Regards
René
On 03/21/2014 01:31 PM, Robert Schüttler wrote:
* René Bleisch accou...@climate.unibe.ch [2014-03-21 12:08]:
Apparently, something went amiss
sorry,
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=742265
(and you were a bit faster than me...)
On 03/21/2014 01:49 PM, René Bleisch wrote:
Hi Robert,
I was faster than you :-( (should have informed fai-mailing)
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=742262
Regards
René
Thanks a lot for your suggestion, this temporary fix also works for me!
Regards
René
On 03/21/2014 01:41 PM, Ralf Utermann wrote:
On 21.03.2014 13:10, René Bleisch wrote:
Hi Toomas,
Both PCs are wheezy (Linux ... 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64
GNU/Linux)
file-versions:
works
Just a comment:
Today I wanted to install a new host (the first since one or two months),
however I ended up with the same dracut error...
It seems that now nfs is needed at the begin of the NFSROOT entry in
nfsroot.conf, to get dracut to recognize the fai-server
;
use-host-decl-names on;
filename fai/pxelinux.0;
...
This worked for years with the old FAI-server
On 04/25/2014 10:57 AM, Thomas Lange wrote:
On Fri, 25 Apr 2014 09:13:35 +0200, René Bleisch accou...@climate.unibe.ch
said:
It seems that now nfs is needed at the begin of the NFSROOT
Thanks for the informations
- dracut: I have version 020-2
I tried your suggestion with NFSROOT=/srv/fai/nfsroot and fai-chboot -u
nfs://IP of phkup26/srv/fai/config, but I still tried to mount the
nfsroot from the dhcp-server.
For me it really only works with
remember having heard something in
former e-mails)
Regards
René
On 07/07/2014 02:48 PM, Thomas Neumann wrote:
On Monday 07 July 2014 11:05:11 René Bleisch wrote:
I already have a FAI-server for my workstations (wheezy). Now I'm trying
to setup an additional FAI-server for my servers (Ubuntu
/2014 10:39 AM, Thomas Lange wrote:
On Tue, 08 Jul 2014 16:25:51 +0200, René Bleisch accou...@climate.unibe.ch
said:
I had quite some problems to solve:
- I had to chmod /srv/tftp/fai_ubuntu/initrd... from -rw--- to
-rw-r--r-- (seems to be a known problem)
I;m windering why you
to enter
the password at the beginning, then expect will automatically handle it
for each parallel ssh-session.
I hope this helps you
Regards
René Bleisch
On 09/19/2014 12:37 PM, Jan Bredereke wrote:
Dear FAI users,
I am currently evaluating FAI and have a question which I could not
answer
Hi Robert,
thanks a lot!
I just went over your new wiki page.
I will test it, when I find some time.
Small note concerning problems with NFS v4 in NFS section:
When switching my FAI server from Debian squeeze to wheezy, I had also
much trouble with NFSv4 (exports, idmapd)...
Finally I got it to
?
Regards
René
--
Dr. René Bleisch
University of Bern
Climate and Environmental Physics
Sidlerstr.5
3012 Bern
Switzerland
Phone: +41 31 631 34 02
Mail: blei...@climate.unibe.ch
On 06/19/2015 03:54 PM, Thomas Lange wrote:
On Fri, 19 Jun 2015 15:09:38 +0200, René Bleisch
accou...@climate.unibe.ch said:
today I installed an Ubuntu Trusty Client from my Debian/wheezy nfsroot
(which I use for all Debian and Ubuntu clients).
during the installation, suddenly some
Dear FAI-Users,
today I installed an Ubuntu Trusty Client from my Debian/wheezy nfsroot
(which I use for all Debian and Ubuntu clients).
during the installation, suddenly some /bin/bash: error importing
function definition for `BASH_FUNC errors where thrown.
The installation seems to succed - the
Hi Dirk
I'm also running several jessie-clients now without serious problems,
I'm using dracut too.
I dont see any systemd-tmpfiles messages in my syslogs.
Just a question: are you trying to use pure systemd or both systemd
and sys-v-init together?
As far as I know, standard jessie uses both
Hi Thomas,
thanks for your tipp with the template option of fai-chboot
Really a useful tool - I didnt know it yet
It seems to work with it
Thanks a lot!
René
On 07/01/2015 11:43 AM, Thomas Lange wrote:
On Wed, 01 Jul 2015 08:35:16 +0200, René Bleisch
accou...@climate.unibe.ch said:
I
Good morning,
I just stumbled over an already known problem, when I tried to install a
host yesterday.
The installation didn't even start because dracut tried to mount the
nfsroot from my dhcp-server, which is not on the same machine as the
fai-server machine ...
This occured because I recently
Hi John,
FAI is missing a basefile ( /var/lib/fai/config/basefiles/CLASS.tgz )
You should create a basefile for Ubuntu vivid as described here:
http://wiki.fai-project.org/wiki/Installing_Ubuntu_Linux_with_FAI#Creating_the_basefile
Regards
René
On 06/30/2015 04:30 PM, John G Heim wrote:
Hi Stefan,
I'm using the test feature.
If I understand you correctly, your script is named
"/srv/fai/config/tests/BASE".
This will not work, as "task_test" checks for class-wise folders with
scripts in it (like "task_configure" does it in /srv/fai/config/scripts/).
You have to create a folder
Hi,
I just ran into problems when I tried to install a xenial client with my
new xenial-config.
The installation got stuck due to a read-only filesystem - similar to
Erwanns (11.2.2016 "NFSROOT mounted on /") and Dirks case ( 27.5.2016
"no writeable /tmp on PXE-Boot...").
As in Erwanns case,
Hi,
I just stumbled over a systemd/journald related problem which may also
affect FAI installations.
Some days ago, when booting a freshly installed PC (Debian jessie) for
the first time, journald could not be started, which means there is no
error logging at all:
"systemd[1]: Failed to
ple config...)
Maybe I should start to check your sample config scripts on a regular
basis ;-)
Regards
René
On 12.01.2017 15:37, Thomas Lange wrote:
On Thu, 12 Jan 2017 14:31:00 +0100, René Bleisch <accou...@climate.unibe.ch>
said:
> I just stumbled over a systemd/journald related pro
has.de wrote:
Hi,
On Mon, Aug 14, 2017 at 11:42:11AM +0200, René Bleisch wrote:
=> does someone have a FAI-setup where apt-https is working during
installations?
yes, but we use debootstrap.
=> is the nfsroot even the right place to add packages which should already be
installed before
Dear all,
I just had problems with a FAI-installation.
Everything went ok until "task_repository".
But then the "apt-get update" failed:
Calling task_updatebase
Updating base
Ign file: KUP/ InRelease
Get:1 file: KUP/ Release.gpg [490 B]
Get:2 file: KUP/ Release [844 B]
Ign file: KUP/
29 matches
Mail list logo
