* Ash Charles ashchar...@gmail.com [150609 08:47]:
This works well for me--cpufreq seems much happier.
Tested-by: Ash Charles ashchar...@gmail.com
On Thu, Jun 4, 2015 at 11:08 AM, Arun Bharadwaj a...@gumstix.com wrote:
The device tree for Gumstix Pepper has DCDC2 and
DCDC3 correctly
* Arun Bharadwaj a...@gumstix.com [150604 11:10]:
From: Adam YH Lee adam.yh@gmail.com
Audio-in was incorrectly routed to Line In. It should be Mic3L as per
schematic.
Using mic-bias voltage at 2.0v (0x1) does not work for some reason. There
is no voltage seen on micbias (R127).
* Pali Rohár pali.ro...@gmail.com [150714 00:16]:
On Monday 13 July 2015 17:36:07 Michael Welling wrote:
On Tue, Jul 14, 2015 at 12:02:44AM +0200, Pali Rohár wrote:
I think nothing special. I just call:
export ARCH=arm
export CROSS_COMPILE=arm-linux-gnueabi-
make rx51_defconfig
* Tony Lindgren t...@atomide.com [150713 21:52]:
* Nishanth Menon n...@ti.com [150713 13:56]:
On Mon, Jul 13, 2015 at 3:41 PM, Felipe Balbi ba...@ti.com wrote:
According to DRA7x TRM section 4.3.5 Realtime Counter (Master Counter),
the realtime counter sits in the Wakeup Always-On Power
* Ash Charles ashchar...@gmail.com [150612 13:39]:
From: Adam YH Lee adam.yh@gmail.com
For Gumstix Overo COMs, the u-boot bootloader typically passes an
argument specifying the default display via the omapdss.def_disp
parameter. When a default display is specified, DSS2 tries to match
* Adam YH Lee adam.yh@gmail.com [150709 15:40]:
Boot process is halting in midway because some of the necessary voltage
regulators are deemed unused and subsequently powered off, leading to
a completely unresponsive system.
Most of the device nodes had correct voltage regulator
* Dave Gerlach d-gerl...@ti.com [150710 14:08]:
CONFIG_HAVE_ARM_SCU only gets selected if CONFIG_SMP is selected in an OMAP
system, however AM43XX needs this option regardless of CONFIG_SMP and also
for an AM43XX only build as it is important for controlling power in the SoC.
Without this we
On Monday 13 July 2015 17:36:07 Michael Welling wrote:
On Tue, Jul 14, 2015 at 12:02:44AM +0200, Pali Rohár wrote:
I think nothing special. I just call:
export ARCH=arm
export CROSS_COMPILE=arm-linux-gnueabi-
make rx51_defconfig
rm -f arch/arm/boot/zImage
make -j12 zImage modules
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/pch_udc.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/pch_udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/mv_u3d_core.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c
b/drivers/usb/gadget/udc/mv_u3d_core.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/mv_udc_core.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/gadget/udc/mv_udc_core.c
b/drivers/usb/gadget/udc/mv_udc_core.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/net2280.c | 50 ++--
1 file changed, 38 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/gadget/udc/net2280.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/pxa27x_udc.h | 33 ++---
1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.h
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/r8a66597-udc.c | 10 ++
1 file changed, 10 insertions(+)
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c
b/drivers/usb/gadget/udc/r8a66597-udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/gr_udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index
* Tero Kristo t-kri...@ti.com [150714 01:56]:
This pull request contains the TI clock driver set to move the clock
implementations under clock driver. Some small portions of the clock driver
code still remain under mach-omap2 after this, it should be decided whether
this code is now obsolete
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/m66592-udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/m66592-udc.c
b/drivers/usb/gadget/udc/m66592-udc.c
index
So far it was necessary for usb functions to set ep-driver_data in
endpoint obtained from autoconfig to non-null value, to indicate that
endpoint is claimed by function (in autoconfig it was checked if endpoint
has set this field to non-null value, and if it has, it was assumed that
it is
Add macros useful while initializing array of endpoint capabilities
structures. These macros makes structure initialization more compact
to decrease number of code lines and increase readability of code.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
include/linux/usb/gadget.h | 20
Introduce struct usb_ep_caps which contains information about capabilities
of usb endpoints - supported transfer types and directions. This structure
should be filled by UDC driver for each of its endpoints, and will be
used in epautoconf in new ep matching mechanism which will replace ugly
The register offsets for some of the PRM Registers are different
hence populating the differing fields.
Tested IO wake up using gpio based SW4 on 1.5A GP evm.
Signed-off-by: Keerthy j-keer...@ti.com
---
arch/arm/mach-omap2/prm44xx.c | 12 +++-
1 file changed, 11 insertions(+), 1
Add PRCM IRQ entry.
Signed-off-by: Keerthy j-keer...@ti.com
---
arch/arm/boot/dts/am4372.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index ade28c79..359a3b6 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++
* Ash Charles ashchar...@gmail.com [150612 13:39]:
The Gumstix Tobi-Duo expansion board [1] can be used with either
OMAP3 Overo or Overo Storm COMs. It provides two NICs using LAN9221
chips.
It is necessary to duplicate the interface information for the
second SMSC9221 chip as discussed [2].
On Mon, Jul 13, 2015 at 03:38:02PM -0500, Felipe Balbi wrote:
there's no need to fetch the platform_device
in order to dereference it back to the dev
pointer to access drvdata, we can use
dev_get_drvdata() instead.
Signed-off-by: Felipe Balbi ba...@ti.com
All patches applied to for-next,
* Nishanth Menon n...@ti.com [150622 08:24]:
In addition to the regular mux configuration such as mux mode 1,
2 etc, certain pins of DRA7 require to have virtual mode also
programmed. This allows for predefined delay characteristics to
be used by the SoC to meet timing characterstics needed
On Wed, Jul 08, 2015 at 04:35:27PM +0200, Jan Luebbe wrote:
At least on the AM335x, enabling OMAP_I2C_SYSTEST_ST_EN is not enough to
Felipe: it seems you did not need this; is this AM335x specific?
allow direct access to the SCL and SDA pins. In addition to ST_EN, we
need to set the TMODE to
Hello.
On 7/14/2015 12:39 PM, Robert Baldyga wrote:
Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Functions does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from
The following changes since commit bc0195aad0daa2ad5b0d76cce22b167bc3435590:
Linux 4.2-rc2 (2015-07-12 15:10:30 -0700)
are available in the git repository at:
g...@github.com:t-kristo/linux-pm.git for-4.3/ti-clk-move
for you to fetch changes up to 792ee6c3ecf813a4e702bdaceee249c722ab89f5:
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/goku_udc.c | 8
1 file changed, 8 insertions(+)
diff --git a/drivers/usb/gadget/udc/goku_udc.c
b/drivers/usb/gadget/udc/goku_udc.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/lpc32xx_udc.c | 32
1 file changed, 32 insertions(+)
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c
The register offsets of IRQENABLE_MPU_2 and IRQSTATUS_MPU_2 are hardcoded.
This makes it difficult to reuse the code for SoCs like AM437x that have
a single instance of IRQENABLE_MPU and IRQSTATUS_MPU registers.
Hence handling the case using offset of 4 to accommodate single set of IRQ*
registers
Enable IO wakeup feature.
Signed-off-by: Keerthy j-keer...@ti.com
---
arch/arm/mach-omap2/prm_common.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 7add799..1730fc4 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++
* Mugunthan V N mugunthan...@ti.com [150622 02:05]:
From: Vignesh R vigne...@ti.com
On DRA72 EVM, cpsw slave1 is muxed with VIN2A, hence switch to cpsw
slave0 for ethernet. Add gpio hog entry to pcf_gpio_21 in order to
select cpsw slave0.
Signed-off-by: Vignesh R vigne...@ti.com
Hello,
This patch series reworks endpoint matching and claiming mechanism in
epautoconf. From v2 there are 11 additional patches adding 'ep_match'
to usb_gadget_ops and removing chip-specific quirk handling from generic
code of autoconfig.
I'm not sure if this patch set isn't too long, as it has
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/net2272.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/pxa25x_udc.c | 32
1 file changed, 32 insertions(+)
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c
Hi,
On Wednesday 10 June 2015 02:56 PM, Lokesh Vutla wrote:
Some IP blocks like RTC, needs an additional unlocking mechanism for
writing to its registers. This patch adds optional lock and unlock
function pointers to the IP block's hwmod data which gets executed
before and after writing into
Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Functions does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.
Signed-off-by: Robert Baldyga
If gadget has set 'ep_match' callback we prefer to call it first to allow
UDC driver to find the best matching endpoint basing on chip-specific best
usage knowledge.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/epautoconf.c | 6 ++
1 file changed, 6
Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Functions does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.
Signed-off-by: Robert Baldyga
Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Functions does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.
Signed-off-by: Robert Baldyga
Rework ep_matches() function to make it shorter and better readable.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/epautoconf.c | 87 +
1 file changed, 35 insertions(+), 52 deletions(-)
diff --git
As now we have usb_gadget_ep_match_desc() function which does exactly the same
thing as ep_matches(), we can remove the second one and replace all of its calls
with usb_gadget_ep_match_desc() calls.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/epautoconf.c | 95
* Dave Gerlach d-gerl...@ti.com [150713 10:37]:
Hi,
Now that wkup_m3_rproc driver [1] has been merged the support code
contained in this series can be merged. This is v4 which is just a
rebase of v3 [2] code on v4.2-rc2, no other changes.
Thanks applying into omap-for-v4.3/dt.
Tony
[1]
The patch series adds IO wake up support for AM437x series
making use of the existing OMAP4 support. Adds the AM437x
specifics.
The series is boot tested on OMAP4 panda, DAR7 evm and AM437x evms.
Changes in v3:
Fixed a bug. Assigned nr_regs = 1 for am437x
Changes in v2:
Removed inefficient
On 07/14/2015 12:54 PM, Tony Lindgren wrote:
* Tero Kristo t-kri...@ti.com [150714 01:56]:
This pull request contains the TI clock driver set to move the clock
implementations under clock driver. Some small portions of the clock driver
code still remain under mach-omap2 after this, it should
Hello.
On 7/14/2015 12:39 PM, Robert Baldyga wrote:
Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Functions does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/omap_udc.c | 22 ++
1 file changed, 22 insertions(+)
diff --git a/drivers/usb/gadget/udc/omap_udc.c
b/drivers/usb/gadget/udc/omap_udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/udc-xilinx.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/gadget/udc/udc-xilinx.c
b/drivers/usb/gadget/udc/udc-xilinx.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/s3c2410_udc.c | 10 ++
1 file changed, 10 insertions(+)
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c
b/drivers/usb/gadget/udc/s3c2410_udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/isp1760/isp1760-udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/isp1760/isp1760-udc.c
b/drivers/usb/isp1760/isp1760-udc.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/dummy_hcd.c | 65 +-
1 file changed, 50 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/fotg210-udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c
b/drivers/usb/gadget/udc/fotg210-udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/bcm63xx_udc.c | 25 +
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/fsl_qe_udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c
b/drivers/usb/gadget/udc/fsl_qe_udc.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/fusb300_udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/fusb300_udc.c
b/drivers/usb/gadget/udc/fusb300_udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/fsl_udc_core.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c
PRM_IO_PMCTRL_OFFSET need not be same for all SOCs hence
remove hardcoding and use the value provided by the omap_prcm_irq_setup
structure.
Signed-off-by: Keerthy j-keer...@ti.com
---
arch/arm/mach-omap2/prcm-common.h | 1 +
arch/arm/mach-omap2/prm44xx.c | 11 ++-
2 files changed, 7
Add the PRM IRQ register offsets.
Signed-off-by: Keerthy j-keer...@ti.com
---
arch/arm/mach-omap2/prcm43xx.h | 5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index 7eebc27..d716d2e 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
* Tony Lindgren t...@atomide.com [150409 12:17]:
* Peter Ujfalusi peter.ujfal...@ti.com [150409 12:07]:
On 04/09/2015 10:01 PM, Tony Lindgren wrote:
* Peter Ujfalusi peter.ujfal...@ti.com [150409 11:55]:
On 04/09/2015 06:18 PM, Tony Lindgren wrote:
* Peter Ujfalusi
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/bdc/bdc_ep.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c
b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/musb/musb_gadget.c | 12
1 file changed, 12 insertions(+)
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/s3c-hsudc.c | 15 +++
1 file changed, 15 insertions(+)
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c
b/drivers/usb/gadget/udc/s3c-hsudc.c
index
Introduce endpoint matching mechanism basing on endpoint capabilities
flags. We check if endpoint supports transfer type and direction requested
in ep descriptor. Since we have this new endpoint matching mechanism
there is no need to have old code guessing endpoint capabilities basing
on its name,
This callback will be called by epautoconf to allow UDC driver match best
endpoint for specific descriptor. It's intended to supply mechanism which
allows to get rid of chip-specific endpoint matching code from epautoconf.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/atmel_usba_udc.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/renesas_usbhs/mod_gadget.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c
b/drivers/usb/renesas_usbhs/mod_gadget.c
As function ep_matches() is used to match endpoint with usb descriptor it's
highly unintuitive that it modifies endpoint and descriptor structures fields.
This patch moves code configuring ep and desc from ep_matches() to
usb_ep_autoconfig_ss(), so now function ep_matches() does nothing more than
* Jyri Sarha jsa...@ti.com [150508 04:29]:
Use new binding for the external tda19988 HDMI encoder.
Applying this into omap-for-v4.3/dt thanks.
Tony
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at
* Tero Kristo t-kri...@ti.com [150714 03:34]:
On 07/14/2015 12:54 PM, Tony Lindgren wrote:
* Tero Kristo t-kri...@ti.com [150714 01:56]:
This pull request contains the TI clock driver set to move the clock
implementations under clock driver. Some small portions of the clock driver
code
On 14/07/15 13:34, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [150512 09:08]:
This register is required to be passed to the SATA PHY driver
to workaround errata i783 (SATA Lockup After SATA DPLL Unlock/Relock).
Signed-off-by: Roger Quadros rog...@ti.com
Signed-off-by: Sekhar Nori
Hello.
On 7/14/2015 12:39 PM, Robert Baldyga wrote:
If gadget has set 'ep_match' callback we prefer to call it first to allow
UDC driver to find the best matching endpoint basing on chip-specific best
usage knowledge.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
* Keerthy a0393...@ti.com [150625 06:48]:
On Thursday 18 June 2015 02:36 PM, Mugunthan V N wrote:
On Thursday 18 June 2015 01:31 PM, Keerthy wrote:
The series adds the missing clock node needed for cpsw.
Keerthy (2):
CLK: TI: add dpll_clksel_mac_clk node
ARM: dts: am4372: Set the
Function find_ep() is no longer needed here, so we can remove it.
We also don't use anything from gadget_chips.h header any longer.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/epautoconf.c | 14 --
1 file changed, 14 deletions(-)
diff --git
Add function matching endpoint with ep descriptor. This function checks if
hardware endponit can fulfill requirements requested in descriptor. This
function can be used by UDC drivers in match_ep() callback to avoid writing
lots of repetitive code.
Signed-off-by: Robert Baldyga
The same effect can be achieved by using capabilities flags, so now we can
get rid of handing of hardware specific limitations in generic code.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/epautoconf.c | 5 -
drivers/usb/gadget/udc/pxa25x_udc.c | 9 +++--
Convert endpoint configuration to new capabilities model.
Fixed typo in epc-nulk to epc-bulk.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/staging/emxx_udc/emxx_udc.c | 60 ++---
1 file changed, 29 insertions(+), 31 deletions(-)
diff --git
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/dwc3/gadget.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 333a7c0..8d1f768 100644
---
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/amd5536udc.c | 57 ++---
1 file changed, 47 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/gadget/udc/amd5536udc.c
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/chipidea/udc.c | 14 ++
1 file changed, 14 insertions(+)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 764f668..eff7cfb 100644
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/dwc2/gadget.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 4d47b7c..8771b66 100644
---
Convert endpoint configuration to new capabilities model.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/udc/at91_udc.c | 33 -
1 file changed, 24 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/gadget/udc/at91_udc.c
* Roger Quadros rog...@ti.com [150512 09:08]:
This register is required to be passed to the SATA PHY driver
to workaround errata i783 (SATA Lockup After SATA DPLL Unlock/Relock).
Signed-off-by: Roger Quadros rog...@ti.com
Signed-off-by: Sekhar Nori nsek...@ti.com
---
On Mon, 13 Jul 2015 16:02:18 -0700
Stephen Boyd sb...@codeaurora.org wrote:
On 07/09, Boris Brezillon wrote:
Hi Stephen,
On Wed, 08 Jul 2015 11:07:42 -0700
Stephen Boyd sb...@codeaurora.org wrote:
On 07/08/2015 02:00 AM, Boris Brezillon wrote:
Hi Stephen,
On Tue, 7 Jul
On 07/14/2015 04:02 AM, Sekhar Nori wrote:
This series works around Advisory 21 as documented in
AM437x SoC errata[1]. This errata prevents UART module
from idling after DMA is used. AM335x and DRA7x also suffer
from the same errata and chip design team is in the process
of updating the
* Peter Ujfalusi peter.ujfal...@ti.com [150701 05:54]:
The sDMA requests are routed through the DMA crossbar and without the
crossbar only peripherals using DMA request 0-127 can be used.
Signed-off-by: Peter Ujfalusi peter.ujfal...@ti.com
---
Hi Tony,
as you have suggested:
* Peter Ujfalusi peter.ujfal...@ti.com [150702 07:08]:
Hi,
Changes since v1:
- Add patch for omap2plus_defconfig to enable needed audio drivers
- Included other board patches since they all need the change in
omap2plus_defconfig
Enable the simple card in omap2plus_defconfig as more
Patch i2c: omap: abolish variable name confusion triggered a
coccinelle warning which we fix here:
drivers/i2c/busses/i2c-omap.c:1333:5-24: pm_runtime_get_sync returns 0 as
error. Unecessary IS_ERR_VALUE at line 1334
Signed-off-by: Wolfram Sang w...@the-dreams.de
---
Hi Wolfram,
On 07/14/2015 02:10 PM, Wolfram Sang wrote:
On Wed, Jul 08, 2015 at 04:35:27PM +0200, Jan Luebbe wrote:
At least on the AM335x, enabling OMAP_I2C_SYSTEST_ST_EN is not enough to
Felipe: it seems you did not need this; is this AM335x specific?
We need it (Felipe's reply can be
On Tue, Jul 14, 2015 at 03:10:01PM +0300, Grygorii Strashko wrote:
Hi Wolfram,
On 07/14/2015 02:10 PM, Wolfram Sang wrote:
On Wed, Jul 08, 2015 at 04:35:27PM +0200, Jan Luebbe wrote:
At least on the AM335x, enabling OMAP_I2C_SYSTEST_ST_EN is not enough to
Felipe: it seems you did not
On 07/14/2015 02:06 PM, Tony Lindgren wrote:
* Keerthy a0393...@ti.com [150625 06:48]:
On Thursday 18 June 2015 02:36 PM, Mugunthan V N wrote:
On Thursday 18 June 2015 01:31 PM, Keerthy wrote:
The series adds the missing clock node needed for cpsw.
Keerthy (2):
CLK: TI: add
Hello.
On 7/14/2015 12:39 PM, Robert Baldyga wrote:
Function find_ep() is no longer needed here, so we can remove it.
We also don't use anything from gadget_chips.h header any longer.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
drivers/usb/gadget/epautoconf.c | 14
Arun Bharadwaj a...@gumstix.com writes:
These 3 patches are included to fix the following issues
with pepper device tree source. The patches are based against
linux-omap/master.
I tested this series on top of linus/master with omap2plus_defconfig and
it seems to successfully boot now (used to
* Peter Hurley pe...@hurleysoftware.com [150714 05:24]:
On 07/14/2015 04:02 AM, Sekhar Nori wrote:
This series works around Advisory 21 as documented in
AM437x SoC errata[1]. This errata prevents UART module
from idling after DMA is used. AM335x and DRA7x also suffer
from the same errata
Add support for writing sequences of registers / patches with specified
delays (in microseconds). Logically separates the functionality using
sequences of register writes from the functions that take register
defaults, as adding a delay field on the reg_defaults can increase
memory usage
We treat a delay in a sequence the same way we treat a page change as
they are logically similar in that you can coalesce all write before
a delay (in the same way you can coalesce all writes before a page
change is needed)
Signed-off-by: Nariman Poushin nari...@opensource.wolfsonmicro.com
---
On 07/14/2015 01:09 PM, Lokesh Vutla wrote:
Hi,
On Wednesday 10 June 2015 02:56 PM, Lokesh Vutla wrote:
Some IP blocks like RTC, needs an additional unlocking mechanism for
writing to its registers. This patch adds optional lock and unlock
function pointers to the IP block's hwmod data which
* Suman Anna s-a...@ti.com [150710 10:31]:
Hi Tony,
This series adds the #iommu-cells property to the existing
IOMMU nodes on OMAP4 OMAP5. It was already fixed for OMAP3
in commit 2055088b5e17 (ARM: dts: omap3: Add #iommu-cells to
isp and iva iommu).
OMAP4 and OMAP5 do not yet have
AM335x, AM437x and DRA7x SoCs have an errata[1] due to which UART
cannot be idled after it has been used with DMA.
OMAP3 has a similar sounding errata which has been worked around
in a2fc36613ac1af2e9 (ARM: OMAP3: Use manual idle for UARTs
because of DMA errata). But the workaround used there
Add ti,dra742-uart to the compatible list so the driver
workaround for UART module disable errata is enabled.
This does not break backward compatibility as existing DTBs
should continue to work with newer kernels albeit without the
capability to idle the UART module when DMA is used.
1 - 100 of 120 matches
Mail list logo
