Hi Tomi,
On Tue, Feb 14, 2012 at 5:52 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
Hi,
The color range is something that desktops have to handle also, so
there's probably ways to handle it in DRM. DisplayPort also has the same
range setting, so it's not specific to HDMI.
So I propose
Hi Tomi,
On Thu, Mar 1, 2012 at 5:01 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
Hi,
On Thu, 2012-03-01 at 13:44 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
Currently TX_PHY is put to TX_ON(transmission state) on receiving HPD.
It just ensures that the TV is
Hi Tomi,
Damage never happens with the cable connected for a long time.. Damage
happens only
when the cable is connected when the PHY is in TX ON state. Which
requires the following sequence to be followed.
1. Wait for HPD connect
2. Wait for the PHY connect ( TMDS lines are up)
3. Enable
On Tue, Feb 21, 2012 at 2:10 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Tue, 2012-02-21 at 13:52 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
With AVI infoframe various parameters of video stream such as
aspect ratio, quantization range, videocode etc will be
Hi,
On Wed, Feb 15, 2012 at 1:11 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Wed, 2012-02-15 at 11:20 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
Add M2 divider in the equation to calculate regm and regmf.
Formula for calculating:
Output clock on digital core
Hi Tomi,
On Wed, Feb 15, 2012 at 8:22 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Wed, 2012-02-15 at 14:55 +0530, K, Mythri P wrote:
Hi,
On Wed, Feb 15, 2012 at 1:11 PM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
On Wed, 2012-02-15 at 11:20 +0530, mythr...@ti.com wrote:
From
Hi Tomi,
On Thu, Jan 5, 2012 at 12:51 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Wed, 2012-01-04 at 17:23 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
Add sysfs support for the uset space to configure limited range or full range
quantization for HDMI.
Hi Tomi,
On Tue, Jan 3, 2012 at 3:39 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
Hi,
Again the subjects are cut off in mid sentence. And the patch series
contains patch 1 two times.
Please use git-format-patch and git-send-email to send proper patches,
and please check the patches
Hi Ricardo,
On Fri, Dec 16, 2011 at 12:33 PM, Ricardo Neri ricardo.n...@ti.com wrote:
It has been detected that HDMI audio is broken in K3.2-rcX due to
the most recent updates in the DSS. This set of patches aims to repair such
break. It also improves the implementation of the ASoC codec to
Hi Tomi,
On Tue, Dec 13, 2011 at 2:18 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Tue, 2011-12-13 at 11:26 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
Disables the internal pull resistor for SDA and SCL which are enabled by
default, as there are expernal pull up's
Hi,
On Fri, Nov 18, 2011 at 1:00 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Tue, 2011-11-15 at 19:20 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
Disables the internal pull resistor for SDA and SCL which are enabled by
default, as there are expernal pull up's in
Hi Tomi,
On Fri, Nov 18, 2011 at 12:46 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Wed, 2011-11-16 at 11:01 +0530, K, Mythri P wrote:
On Mon, Nov 14, 2011 at 1:03 PM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
On Fri, 2011-11-11 at 18:39 +0530, mythr...@ti.com wrote:
-static int
Hi Tomi,
On Mon, Nov 14, 2011 at 12:50 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-11-11 at 18:39 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
Add the vsync polarity, hsync polarity, interlace to hdmi_video_timings.
Remove the now duplicate structure
On Mon, Nov 14, 2011 at 1:03 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-11-11 at 18:39 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
Change the timing match logic, Instead of the statically mapped method
to get the corresponding timings for a given code and
Hi Tony,
On Fri, Nov 11, 2011 at 10:52 PM, Tony Lindgren t...@atomide.com wrote:
* mythr...@ti.com mythr...@ti.com [11 04:41]:
From: Mythri P K mythr...@ti.com
Disables the internal pull resistor for SDA and SCL enabled by
default as there are expernal pull up's in 4460 and 4430 ES2.3,
Hi,
On Fri, Sep 23, 2011 at 11:31 AM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-09-23 at 11:22 +0530, K, Mythri P wrote:
- What is dcofreq? Looking at the code, it tells if the pixel clock is
1000MHz. Why is such a field needed, can't the HDMI driver manage that
itself
Hi,
On Fri, Sep 23, 2011 at 4:15 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-09-23 at 15:02 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
Add support to dump the HDMI PLL dividers such as regm, regn etc
and other clock dumps such as pixel clock rate, TMDS
Hi,
On Thu, Sep 22, 2011 at 5:31 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Thu, 2011-09-22 at 13:37 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
Add support to dump the HDMI regm, regn, and other clock parameters.
The subjects of this and previous patch seem to be
Hi,
On Tue, Sep 20, 2011 at 7:01 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Tue, 2011-09-20 at 18:19 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
Add support to dump the HDMI regm, regn, and other clock parameters.
This patch doesn't work at all. It's checking for
Hi,
On Thu, Sep 15, 2011 at 12:02 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Thu, 2011-09-15 at 11:54 +0530, K, Mythri P wrote:
Hi,
On Thu, Sep 15, 2011 at 11:27 AM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
On Thu, 2011-09-15 at 11:11 +0530, K, Mythri P wrote:
Hi,
On Wed
Hi,
On Thu, Sep 15, 2011 at 11:27 AM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Thu, 2011-09-15 at 11:11 +0530, K, Mythri P wrote:
Hi,
On Wed, Sep 14, 2011 at 7:41 PM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
Yes, you are right, detect() does not know if the monitor has changed
On Wed, Sep 14, 2011 at 2:04 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Wed, 2011-09-14 at 13:57 +0530, K, Mythri P wrote:
On Wed, Sep 14, 2011 at 12:44 PM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
On Wed, 2011-09-14 at 11:04 +0530, K, Mythri P wrote:
Hi,
On Mon, Sep 12
Hi,
On Wed, Sep 14, 2011 at 2:27 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Wed, 2011-09-14 at 14:18 +0530, K, Mythri P wrote:
On Wed, Sep 14, 2011 at 2:04 PM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
On Wed, 2011-09-14 at 13:57 +0530, K, Mythri P wrote:
On Wed, Sep 14, 2011
Hi,
On Wed, Sep 14, 2011 at 7:41 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Wed, 2011-09-14 at 17:50 +0530, K, Mythri P wrote:
Hi,
On Wed, Sep 14, 2011 at 2:27 PM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
On Wed, 2011-09-14 at 14:18 +0530, K, Mythri P wrote:
On Wed, Sep 14
Hi,
On Mon, Sep 12, 2011 at 10:16 PM, Rob Clark robdcl...@gmail.com wrote:
On Mon, Sep 12, 2011 at 8:24 AM, K, Mythri P mythr...@ti.com wrote:
+bool ti_hdmi_4xxx_detect(struct hdmi_ip_data *ip_data)
+{
+ int r;
+
+ void __iomem *base = hdmi_core_sys_base(ip_data
Hi Tomi,
On Mon, Sep 12, 2011 at 2:43 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
Implement detect() by checking the hot plug detect status.
The implementation is not very good, as it always turns on the HDMI
output to get the detection working. HDMI driver needs improvements so
that we
Hi,
On Wed, Sep 7, 2011 at 5:25 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
Hi,
On Tue, 2011-09-06 at 17:28 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
HDMI IP block is common between TI OMAP4 Procerssor and Netra processor
although
the Display subsytem is
Hi,
On Mon, Sep 5, 2011 at 11:03 PM, K, Mythri P mythr...@ti.com wrote:
Hi,
On Mon, Sep 5, 2011 at 4:31 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-09-02 at 16:17 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
To make the current hdmi DSS driver compatible
Hi,
On Mon, Sep 5, 2011 at 6:52 PM, K, Mythri P mythr...@ti.com wrote:
Hi,
On Mon, Sep 5, 2011 at 5:45 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-09-02 at 16:17 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
HDMI IP block is common between TI OMAP4
Hi,
On Tue, Sep 6, 2011 at 3:47 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Tue, 2011-09-06 at 11:38 +0530, K, Mythri P wrote:
Did you consider how the code would look if the function pointers
were
just included into struct hdmi_ip_data, without any ops struct at
all?
I tried
Hi,
On Tue, Sep 6, 2011 at 3:09 PM, K, Mythri P mythr...@ti.com wrote:
Hi,
On Mon, Sep 5, 2011 at 6:52 PM, K, Mythri P mythr...@ti.com wrote:
Hi,
On Mon, Sep 5, 2011 at 5:45 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-09-02 at 16:17 +0530, mythr...@ti.com wrote:
From
Hi,
On Tue, Sep 6, 2011 at 6:15 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Mon, 2011-09-05 at 23:03 +0530, K, Mythri P wrote:
Hi,
On Mon, Sep 5, 2011 at 4:31 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-09-02 at 16:17 +0530, mythr...@ti.com wrote:
From: Mythri P K
Hi,
On Mon, Sep 5, 2011 at 5:45 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-09-02 at 16:17 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
HDMI IP block is common between TI OMAP4 Procerssor and Netra processor
although
the Display subsytem is different.Also
Hi,
On Mon, Sep 5, 2011 at 4:31 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-09-02 at 16:17 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
To make the current hdmi DSS driver compatible with future OMAP having
different IP blocks( A combination of different
Hi,
On Mon, Sep 5, 2011 at 1:10 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-09-02 at 16:17 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
HDMI IP block is common between TI OMAP4 Procerssor and Netra processor
although
the Display subsytem is different.Also
Hi,
On Thu, Sep 1, 2011 at 1:44 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Mon, 2011-08-29 at 11:44 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
Define new HDMI timings structure to replace the OMAP DSS timing strucutre in
hdmi.c to have the HDMI include defintion
Hi,
On Thu, Sep 1, 2011 at 1:57 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Mon, 2011-08-29 at 11:44 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
As the pll and the video configuration info are part of the ip_data those
structures are moved to the ip_data
Hi,
On Thu, Sep 1, 2011 at 2:30 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Mon, 2011-08-29 at 11:44 +0530, mythr...@ti.com wrote:
From: Mythri P K mythr...@ti.com
Some of the header file definitions of HDMI IP are needed by audio driver
thus
moving the common defintion to more
Hi,
On Fri, Sep 2, 2011 at 10:43 AM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-09-02 at 10:41 +0530, K, Mythri P wrote:
Hi,
On Thu, Sep 1, 2011 at 1:57 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Mon, 2011-08-29 at 11:44 +0530, mythr...@ti.com wrote:
From: Mythri P K
Hi,
On Fri, Sep 2, 2011 at 10:54 AM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-09-02 at 10:45 +0530, K, Mythri P wrote:
Hi,
On Thu, Sep 1, 2011 at 2:30 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Mon, 2011-08-29 at 11:44 +0530, mythr...@ti.com wrote:
From: Mythri P K
Hi Tomi,
On Fri, Jul 1, 2011 at 2:21 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Thu, 2011-06-30 at 23:16 +0530, K, Mythri P wrote:
Hi Tomi,
On Wed, Jun 29, 2011 at 9:51 PM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
Hi,
On Wed, 2011-06-29 at 19:08 +0530, K, Mythri P wrote
Hi Tomi,
On Fri, Jul 1, 2011 at 5:14 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-07-01 at 14:52 +0530, K, Mythri P wrote:
I don't see a need for a separate file right now. We have the
hdmi_ti_4xxx_ip.c file which contains code for the HDMI block as a
whole, and could well
Hi Tomi,
On Wed, Jun 29, 2011 at 9:51 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
Hi,
On Wed, 2011-06-29 at 19:08 +0530, K, Mythri P wrote:
Hi Tomi,
As the HDMI PLL , PHY and video blocks are logical blocks it would
make sense to have the API's for all and the DSS HDMI (interface
Hi Tomi,
On Mon, Jun 27, 2011 at 6:28 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Mon, 2011-06-27 at 11:21 +0530, K, Mythri P wrote:
Hi Tomi,
On Thu, Jun 23, 2011 at 6:01 PM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
On Thu, 2011-06-23 at 17:35 +0530, K, Mythri P wrote:
Hi
Hi Tomi,
On Thu, Jun 23, 2011 at 6:01 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Thu, 2011-06-23 at 17:35 +0530, K, Mythri P wrote:
Hi Tomi,
On Thu, Jun 23, 2011 at 3:28 PM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
On Fri, 2011-06-17 at 13:47 +0530, Mythri P K wrote:
HDMI IP
Hi Tomi,
On Thu, Jun 23, 2011 at 2:00 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-06-17 at 13:47 +0530, Mythri P K wrote:
Define new HDMI timings structure to replace the OMAP DSS timing strucutre
in hdmi.c
to have the HDMI include defintion out of DSS.
Signed-off-by:
Hi Sanjeev,
snip
The changes in the patch aren't limited to DSS alone.
See updated to hdmi_core_audio_config(),
hdmi_wp_audio_config_format(),
hdmi_wp_audio_config_dma(), etc.
The changes are related to the HDMI driver which as of this patch is
in DSS. You see any
Hi Sanjeev,
On Thu, Jun 23, 2011 at 4:33 PM, Premi, Sanjeev pr...@ti.com wrote:
-Original Message-
From: K, Mythri P
Sent: Thursday, June 23, 2011 4:30 PM
To: Premi, Sanjeev
Cc: linux-omap@vger.kernel.org; Valkeinen, Tomi
Subject: Re: [PATCH 1/8] OMAP4: DSS: HDMI: HDMI clean up
Hi Tomi,
On Thu, Jun 23, 2011 at 3:28 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-06-17 at 13:47 +0530, Mythri P K wrote:
HDMI IP block is common between TI OMAP4 Procerssor and Netra processor
although
the Display subsytem is different. Thus to reuse the code between these
Hi Sanjeev,
On Mon, Jun 20, 2011 at 6:16 PM, Premi, Sanjeev pr...@ti.com wrote:
-Original Message-
From: linux-omap-ow...@vger.kernel.org
[mailto:linux-omap-ow...@vger.kernel.org] On Behalf Of K, Mythri P
Sent: Friday, June 17, 2011 1:47 PM
To: linux-omap@vger.kernel.org; Valkeinen
Hi Sanjeev,
On Mon, Jun 20, 2011 at 7:03 PM, Premi, Sanjeev pr...@ti.com wrote:
-Original Message-
From: linux-omap-ow...@vger.kernel.org
[mailto:linux-omap-ow...@vger.kernel.org] On Behalf Of K, Mythri P
Sent: Friday, June 17, 2011 1:47 PM
To: linux-omap@vger.kernel.org; Valkeinen
Hi,
On Mon, Jun 20, 2011 at 7:18 PM, Premi, Sanjeev pr...@ti.com wrote:
-Original Message-
From: linux-omap-ow...@vger.kernel.org
[mailto:linux-omap-ow...@vger.kernel.org] On Behalf Of K, Mythri P
Sent: Friday, June 17, 2011 1:47 PM
To: linux-omap@vger.kernel.org; Valkeinen, Tomi
Cc
Hi Gunnedi,
snip
Dave's point is that we can't ditch the existing code without
introducing a lot of risk; it would be better to start a library-ized
EDID codebase from the most complete one we have already, i.e. the DRM
EDID code.
Does the DRM EDID-parser also process blocks beyond the
Hi Florian,
snip
So why should this be a common library? Most kernel code doesn't need
it. Or is there a serious need for video input to parse EDIDs?
It's true that most kernel code does not need it as it is only useful for
display output systems (and only the ones that can be connected to
Hi Jesse,
On Wed, Mar 23, 2011 at 8:48 PM, Jesse Barnes jbar...@virtuousgeek.org wrote:
On Wed, 23 Mar 2011 18:58:27 +0530
K, Mythri P mythr...@ti.com wrote:
Hi Dave,
On Wed, Mar 23, 2011 at 6:16 AM, Dave Airlie airl...@gmail.com wrote:
On Wed, Mar 23, 2011 at 3:32 AM, Mythri P K mythr
Hi Dave,
On Wed, Mar 23, 2011 at 6:16 AM, Dave Airlie airl...@gmail.com wrote:
On Wed, Mar 23, 2011 at 3:32 AM, Mythri P K mythr...@ti.com wrote:
Adding support for common EDID parsing in kernel.
EDID - Extended display identification data is a data structure provided by
a digital display to
Hi Paul,
On Tue, Mar 22, 2011 at 11:28 PM, Paul Mundt let...@linux-sh.org wrote:
On Tue, Mar 22, 2011 at 02:52:59PM -0300, Mauro Carvalho Chehab wrote:
Em 22-03-2011 14:32, Mythri P K escreveu:
Adding support for common EDID parsing in kernel.
EDID - Extended display identification data
Hi Tomi,
On Wed, Mar 16, 2011 at 12:21 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Sun, 2011-03-13 at 11:20 -0500, Stephan Raue wrote:
Am 13.03.2011 15:32, schrieb Stephan Raue:
snip
i have tried this omap2plus defconfig now too, with some little
changes needed to boot my system
Hi Tomi,Sebastien,
On Tue, Mar 15, 2011 at 9:36 AM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Mon, 2011-03-14 at 05:37 -0500, Jan, Sebastien wrote:
Hi Tomi,
On Thu, Mar 10, 2011 at 2:44 PM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
I think this version is good. It works for me, at
Hi,
On Sat, Mar 12, 2011 at 12:12 AM, Stephan Raue mailingli...@openelec.tv wrote:
Am 11.03.2011 19:27, schrieb Tomi Valkeinen:
On Fri, 2011-03-11 at 10:18 -0600, Stephan Raue wrote:
Am 11.03.2011 14:22, schrieb Tomi Valkeinen:
On Fri, 2011-03-11 at 02:43 -0600, Stephan Raue wrote:
Am
Hi Tomi,
On Thu, Mar 10, 2011 at 1:22 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Wed, 2011-03-09 at 05:45 -0600, K, Mythri P wrote:
The panel driver(hdmi_omap4_panel.c) in omap2/dss acts as a controller
to manage the enable and disable requests and synchronize audio and video.
Signed
Hi Tomi,
On Thu, Mar 10, 2011 at 2:49 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Thu, 2011-03-10 at 03:00 -0600, K, Mythri P wrote:
Hi Tomi,
On Thu, Mar 10, 2011 at 1:22 PM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
On Wed, 2011-03-09 at 05:45 -0600, K, Mythri P wrote
Hi Vaibhav,
On Thu, Mar 10, 2011 at 3:09 PM, Hiremath, Vaibhav hvaib...@ti.com wrote:
-Original Message-
From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap-
ow...@vger.kernel.org] On Behalf Of K, Mythri P
Sent: Thursday, March 10, 2011 3:03 PM
To: Valkeinen, Tomi
Cc: linux
Hi Stephan,
On Fri, Mar 11, 2011 at 5:37 AM, Stephan Raue mailingli...@openelec.tv wrote:
Hi Tomi,
Am 10.03.2011 15:51, schrieb Tomi Valkeinen:
On Thu, 2011-03-10 at 08:45 -0600, Stephan Raue wrote:
Hi,
if i try this patch series the boot stops after (seeing via serial
console):
Hi Sanjeev,
On Wed, Mar 9, 2011 at 9:26 PM, Premi, Sanjeev pr...@ti.com wrote:
-Original Message-
From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap-
ow...@vger.kernel.org] On Behalf Of K, Mythri P
Sent: Wednesday, March 09, 2011 5:15 PM
To: linux-omap@vger.kernel.org
Hi Sanjeev,
On Wed, Mar 9, 2011 at 9:20 PM, Premi, Sanjeev pr...@ti.com wrote:
-Original Message-
From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap-
ow...@vger.kernel.org] On Behalf Of K, Mythri P
Sent: Wednesday, March 09, 2011 5:15 PM
To: linux-omap@vger.kernel.org
Hi Sanjeev,
On Wed, Mar 9, 2011 at 9:24 PM, Premi, Sanjeev pr...@ti.com wrote:
-Original Message-
From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap-
ow...@vger.kernel.org] On Behalf Of K, Mythri P
Sent: Wednesday, March 09, 2011 5:15 PM
To: linux-omap@vger.kernel.org
Hi Tomi,
On Wed, Mar 9, 2011 at 7:53 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Wed, 2011-03-09 at 05:45 -0600, K, Mythri P wrote:
The panel driver(hdmi_omap4_panel.c) in omap2/dss acts as a controller
to manage the enable and disable requests and synchronize audio and video.
Signed
Hi Tomi,
On Mon, Mar 7, 2011 at 2:10 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-03-04 at 01:48 -0600, K, Mythri P wrote:
Adding HDMI support on OMAP4.
HDMI is a driver that is similar to the VENC or the DSI driver to support
HDMI/DVI sink device.
snip
1. v10 of omap2,3
Hi Tomi,
On Mon, Mar 7, 2011 at 3:16 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-03-04 at 01:48 -0600, K, Mythri P wrote:
Adding the hdmi interface driver header file (hdmi.h) to the dss driver.
Register and timing declaration to be used by the corresponding c file
is added
Hi Tomi,
On Tue, Mar 1, 2011 at 10:31 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Tue, 2011-03-01 at 08:16 -0600, K, Mythri P wrote:
Adding changes to set gamma table bit for TV interface and function to select
between VENC and HDMI.
Signed-off-by: Mythri P K mythr...@ti.com
On Tue, Mar 1, 2011 at 10:41 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Tue, 2011-03-01 at 08:16 -0600, K, Mythri P wrote:
The panel driver(hdmi_omap4_panel.c) in dss file acts as a controller
to manage the enable and disable requests and synchronize audio and video.
Also the header
Hi Tomi,
I have checked for static functions :) .
Ok i will revisit the global variables to either move it to hdmi
struct or make it const.
Thanks and regards,
Mythri.
On Tue, Mar 1, 2011 at 11:07 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Tue, 2011-03-01 at 08:16 -0600, K, Mythri P
Hi Tomi,
On Sun, Feb 27, 2011 at 2:43 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-02-25 at 08:21 -0600, K, Mythri P wrote:
Adding board file changes for display which adds the display structure
with HDMI as the default driver when the display init is called.
HDMI GPIO
Hi Tomi,
On Sun, Feb 27, 2011 at 2:58 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-02-25 at 08:21 -0600, K, Mythri P wrote:
Adding the hdmi interface driver header file (hdmi.h) to the dss driver.
Register and timing declaration to be used by the corresponding c file is
added
Hi Tomi,
On Sun, Feb 27, 2011 at 3:47 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-02-25 at 08:21 -0600, K, Mythri P wrote:
Adding the hdmi interface driver(hdmi.c) to the dss driver.
It configures the audio and video portion of HDMI in the
display header file to be accessed
Hi Tomi,
I shall add per device lock and make the lock consistent , as audio
can also call these functions.
Thanks and regards,
Mythri.
On Sun, Feb 27, 2011 at 3:13 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-02-25 at 08:21 -0600, K, Mythri P wrote:
The panel driver
Hi Tomi,
On Sun, Feb 27, 2011 at 2:53 PM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Fri, 2011-02-25 at 08:21 -0600, K, Mythri P wrote:
Adding changes to set gamma table bit for TV interface and function to select
between VENC and HDMI.
Signed-off-by: Mythri P K mythr...@ti.com
Hi Tomi,
On Mon, Feb 28, 2011 at 11:57 AM, Tomi Valkeinen tomi.valkei...@ti.com wrote:
On Mon, 2011-02-28 at 00:11 -0600, K, Mythri P wrote:
Hi Tomi,
On Sun, Feb 27, 2011 at 3:47 PM, Tomi Valkeinen tomi.valkei...@ti.com
wrote:
+ * HDMI interface DSS driver setting for TI's OMAP4 family
Hi Tomi,
Can you please comment on the below patch series?
Thanks and regards,
Mythri.
-Original Message-
From: K, Mythri P
Sent: Monday, August 23, 2010 2:48 PM
To: linux-omap@vger.kernel.org
Cc: tomi.valkei...@nokia.com; K, Mythri P
Subject: [PATCH 0/2]OMAP:DSS:RFC for HDMI
Hi Tomi,
-Original Message-
From: Tomi Valkeinen [mailto:tomi.valkei...@nokia.com]
Sent: Tuesday, September 07, 2010 4:23 PM
To: K, Mythri P
Cc: linux-omap@vger.kernel.org
Subject: Re: [PATCH 0/2]OMAP:DSS:RFC for HDMI in OMAP4
Hi,
On Thu, 2010-08-26 at 07:16 +0200, ext K
Hi Tomi,
-Original Message-
From: Tomi Valkeinen [mailto:tomi.valkei...@nokia.com]
Sent: Tuesday, September 07, 2010 6:47 PM
To: K, Mythri P
Cc: linux-omap@vger.kernel.org
Subject: Re: [PATCH 2/2] OMAP:DSS: RFC Patch to add HDMI DSS driver
support
On Thu, 2010-08-26 at 07:17
Hi Tomi,
-Original Message-
From: Tomi Valkeinen [mailto:tomi.valkei...@nokia.com]
Sent: Tuesday, September 07, 2010 7:15 PM
To: K, Mythri P
Cc: linux-omap@vger.kernel.org
Subject: RE: [PATCH 2/2] OMAP:DSS: RFC Patch to add HDMI DSS driver
support
On Tue, 2010-09-07 at 15:37
, Mythri P
Cc: linux-omap@vger.kernel.org; Semwal, Sumit
Subject: Re: [PATCHv2] OMAP:DSS:Add support for Additional color
modes supported by OMAP4
On Thu, 2010-08-26 at 12:15 +0200, ext K, Mythri P wrote:
From: Sumit semwal sumit.sem...@ti.com
Signed-off-by: Mythri P K mythr...@ti.com
From: Sumit semwal sumit.sem...@ti.com
Signed-off-by: Mythri P K mythr...@ti.com
---
arch/arm/plat-omap/include/plat/display.h | 17 +-
drivers/video/omap2/dss/dispc.c | 53 ++---
drivers/video/omap2/dss/overlay.c | 15 +---
3 files
Hi Tomi,
-Original Message-
From: Tomi Valkeinen [mailto:tomi.valkei...@nokia.com]
Sent: Thursday, August 26, 2010 4:31 PM
To: K, Mythri P
Cc: linux-omap@vger.kernel.org; Semwal, Sumit
Subject: Re: [PATCHv2] OMAP:DSS:Add support for Additional color modes
supported by OMAP4
Hi Tomi,
Can you please comment on the below patch .
I have modified based on your inputs.
Thanks and regards,
Mythri.
-Original Message-
From: K, Mythri P
Sent: Thursday, August 19, 2010 4:49 PM
To: linux-omap@vger.kernel.org
Cc: tomi.valkei...@nokia.com; Semwal, Sumit; K, Mythri P
From: Mythri P K mythr...@ti.com
This patch is a outline of how the HDMI support is added to OMAP4.
HDMI is a driver that is similar to the VENC or the DSI driver to support
HDMI/DVI sink device.
The current Design adheres to the DSS2 Architecture.
It is split into the HDMI DSS driver and
From: Mythri P K mythr...@ti.com
This is an RFC patch to add support for HDMI DSS driver in OMAP.
Signed-off-by: Mythri P K mythr...@ti.com
---
drivers/video/omap2/dss/hdmi.c | 292
1 files changed, 292 insertions(+), 0 deletions(-)
create mode 100644
Hi Tomi,
-Original Message-
From: Tomi Valkeinen [mailto:tomi.valkei...@nokia.com]
Sent: Tuesday, August 17, 2010 4:31 PM
To: K, Mythri P
Cc: linux-omap@vger.kernel.org
Subject: RE: [PATCH] OMAP:DSS:Add support for Additional color modes supported
by OMAP4
Hi,
On Wed, 2010-08-11 at 11
, Mythri P
Cc: linux-omap@vger.kernel.org
Subject: RE: [PATCH] OMAP:DSS:Add support for Additional color modes
supported by OMAP4
Hi,
On Wed, 2010-08-18 at 09:56 +0200, ext K, Mythri P wrote:
Hi Tomi,
-Original Message-
From: Tomi Valkeinen [mailto:tomi.valkei...@nokia.com
-
0xE: RGBx24- (24-bit RGB aligned on MSB of the
32-bit container)
Thanks and regards,
Mythri.
-Original Message-
From: Tomi Valkeinen [mailto:tomi.valkei...@nokia.com]
Sent: Wednesday, August 18, 2010 6:43 PM
To: K, Mythri P
Cc: linux-omap@vger.kernel.org
Subject: RE: [PATCH
Hi Tomi,
Can you please comment on the below patch . This is to add new color modes
supported by OMAP4.
Thanks and regards,
Mythri.
-Original Message-
From: K, Mythri P
Sent: Thursday, August 05, 2010 11:24 AM
To: linux-omap@vger.kernel.org
Cc: tomi.valkei...@nokia.com; Semwal, Sumit
93 matches
Mail list logo