On Wed, Sep 05 2007 at 2:13 +0300, Kiyoshi Ueda [EMAIL PROTECTED] wrote:
Hi,
On Tue, 4 Sep 2007 17:25:14 -0400, Halevy, Benny [EMAIL PROTECTED] wrote:
We suspect we'll still need the extern entry points for handling the bidi
request in the scsi_io_completion() path as we only want to call
On Monday 03 September 2007 14:40, Matthew Wilcox wrote:
On Mon, Sep 03, 2007 at 02:16:21PM +0200, Swen Schillig wrote:
/sys/bus/ccw/drivers/zfcp/0.0.1707
/* information for the virtual adapter */
statistic_services/
requests
megabytes
Hi, I am a newbie to Linux. We are installing Fedora Core 5, but
unable to view the SCSI hard drives.
We are using Dell Power Edge 1850 with on-board SCSI RAID. From my
research, it requires the following drivers as the kernel is
2.6.18-1.2257.fc5smp, use the 'megaraid_mbox' and 'megaraid_mm'
On Wed, Sep 05, 2007 at 09:40:11AM -0400, Dev wrote:
Hi, I am a newbie to Linux. We are installing Fedora Core 5, but
unable to view the SCSI hard drives.
We are using Dell Power Edge 1850 with on-board SCSI RAID. From my
research, it requires the following drivers as the kernel is
Hi Benny,
Thank you for the comments.
On Wed, 05 Sep 2007 10:45:54 +0300, Boaz Harrosh [EMAIL PROTECTED] wrote:
On Sat, Sep 01 2007 at 1:42 +0300, Kiyoshi Ueda [EMAIL PROTECTED] wrote:
arch/arm/plat-omap/mailbox.c|9 ++---
arch/um/drivers/ubd_kern.c | 10 +-
On Sat, 01 Sep 2007, FUJITA Tomonori wrote:
This adds target mode support to qla2xxx.
With set ql2enable_target_mode module parameter to 1, the driver runs
in target mode. By default, ql2enable_target_mode is set to 0, and the
driver should work in initiator mode as before.
The driver
From: Swen Schillig [EMAIL PROTECTED]
add statistics and other zfcp related information to sysfs
The zfcp adapter provides a variety of information which was never
published to the external world. This patch adds a few of those statistics
to the sysfs tree structure.
These are reflected in the
On Wed, 5 Sep 2007 08:05:34 -0700
Andrew Vasquez [EMAIL PROTECTED] wrote:
On Sat, 01 Sep 2007, FUJITA Tomonori wrote:
This adds target mode support to qla2xxx.
With set ql2enable_target_mode module parameter to 1, the driver runs
in target mode. By default, ql2enable_target_mode is
Michael Chan wrote:
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 6f2c71e..adcfbbc 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1800,6 +1800,8 @@ config ZFCP
called zfcp. If you want to compile it as a module, say M here
and read
Fixed the problem that smartctl -a /dev/some_sata_disk -d ata does not
work on SATA device.
( The smartctl v5.38 does need -d ata option.)
The root cause is the aic94xx driver does not return ATA output register due
to performance reason.
The aic94xx need check ATA command which
Add new HBA PCI ID (0x416) for ASC58300 which has eight port SAS and
SATA PCI-X 133MHz low profile host bus adapter with two mini SAS 4x
external connectors.
Signed-off-by: Gilbert Wu [EMAIL PROTECTED]
diff -urN a/drivers/scsi/aic94xx/aic94xx_hwi.h
b/drivers/scsi/aic94xx/aic94xx_hwi.h
---
On Wed, 2007-09-05 at 13:34 -0500, Mike Christie wrote:
Michael Chan wrote:
+* This file defines HSI constants for the iSCSI flows
+*/
+
+/* iSCSI request op codes */
+#define ISCSI_OPCODE_NOP_OUT (0 | 0x40)
+#define ISCSI_OPCODE_SCSI_CMD (1)
James - These fusion patchs from -mm can be merged into scsi-misc. Here is a
single patch containing all four changes.
Changeset:
[patch 08/30] Use menuconfig objects: Fusion
http://marc.info/?l=linux-scsim=118678275800902w=2
[patch 26/30] drivers/message/fusion/mptctl.c: mostly
On Sunday, September 02, 2007 2:20 PM, Satyam Sharma wrote:
drivers/message/fusion/mptctl.c: In function 'mptctl_mpt_command':
drivers/message/fusion/mptctl.c:1764: warning: 'bufIn.len'
may be used uninitialized in this function
drivers/message/fusion/mptctl.c:1765: warning: 'bufOut.len'
14 matches
Mail list logo
