Is it possible to set specific alignment to cells in the same column?
This would be useful when some cells contain numbers, whereas others contain
numbers.
I remember it was possible too align cells to the decimal point, but i do
not remember how to do; any hints?
thanks
--pol
pol wrote:
Is it possible to set specific alignment to cells in the same column?
This would be useful when some cells contain numbers, whereas others
contain numbers.
yes, if you make the single cells multicolumn cells.
I remember it was possible too align cells to the decimal point, but i
Hi
is there anywhere an example on how to use chapterbib? I don't seem to
be able to get it to work and I need Bibliographies per chapter (each
chapter in an included sub-document)
Thanks
Rainer
--
Rainer M. Krug, Dipl. Phys. (Germany), MSc Conservation
Biology (UCT)
Department of
It's discussed in section 12.6 of /The LaTeX Companion/.
Richard
Rainer M Krug wrote:
Hi
is there anywhere an example on how to use chapterbib? I don't seem to
be able to get it to work and I need Bibliographies per chapter (each
chapter in an included sub-document)
Thanks
Rainer
LB wrote:
I uninstalled Lyx and reinstalled it into c:\lyx\lyx14. This solved
my figure problem!!!
Thank you. I can now use 1.4.2
Looks like I spoke too soon. Now a different figure does not want to be
displayed.
Leo
Does it display the same old symptoms; it works with lyx.exe
or
Ed Gatzke wrote:
Is there any way to turn off the dialog for export errors, for The file already
exists, Overwrite?
I don't think so (short of modifying the source and recompiling).
I select export and switch to another application, a few second later the error
dialog get buried (on XP), and
Bonjour à tous ,
Je suis en train de rédiger mon mémoire de thèse sous Lyx, tout se passe très
bien à l'exception d'un détail : je n'arrive pas à centrer horizontalement les
figures que j'insère dans les espaces « figure flottante »
A part l'utilisation, lourde et génératrice d'erreurs, de
If I understand the question correctly, you need to change the
paragraph setting within the figure to be centered instead of
justified.
On Aug 2, 2006, at 10:27 AM, THIBAULT Florent wrote:
Bonjour à tous ,
Je suis en train de rédiger mon mémoire de thèse sous Lyx, tout se
passe très
Jason,
I can confirm that your patch still works for LyX 1.4.2 - I had
actually tried this a week ago on an Intel Mac. That patch is a life
saver for emacs people! I'll post the LyX 1.4.2 Mac Intel version
with the key patch on my site in a few minutes (just the
application). I won't be
Thank you all,
with your help I have finally tamed the beast.
(one of the problems was, that the path to the qt-directory was not
correct... for all future readers: (K)ubuntus qt-path
is: /usr/share/qt, not /usr/lib nor /usr/lib/qt neither whatsoever ...)
Best greetings
Christopher
Hello all,
sorry, I keep on asking for help ...
After finally being able to compile lyx (1.4.2) with Kubuntu (Dapper),
there is one thing that sucks a little bit.
If I want to run lyx in German, all umlauts in the menues are distorted.
No problem, I thought, let's start lyx with:
LANG=de_DE;
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I tried reinstalling to C:\ and that
works okay. Looking through some of these older messages, it
Eric Inazaki wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way.
No, it works fine from C:\Program Files\...
This happened to me on my first
installation attempt. I tried reinstalling to C:\ and
On 8/2/06, Eric Inazaki [EMAIL PROTECTED] wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I tried reinstalling to C:\ and that
works okay.
Paul A. Rubin [EMAIL PROTECTED] writes:
Eric Inazaki wrote:
Did it give you a message about not finding class files? There have
been instances where LyX installed properly but the configuration script
failed, and subsequently LyX would not start because it could not find
the
Bo Peng [EMAIL PROTECTED] writes:
On 8/2/06, Eric Inazaki [EMAIL PROTECTED] wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I
Hello everyone,
I published a page about my tips and tricks on LyX, LATEX and BibTEX at:
http://www.webalice.it/ares001/job/Tips.htm
Let me know if you find it useful or if you find any error...
Regards,
Diego
Can you click the Show Desktop icon (or type Win-D, where Win is the
Windows key) to minimize everything, then click the LyX button in the
task bar and get to the dialog?
I can just as easily Alt-Tab to the Lyx window or click on the taskbar.
It is an odd behavior to lose the error
Hi all,
I've been using lyx 1.3.7 on windows XP for quite a while and everything is
working fine.
When I made the switch to 1.4.2, I lost the lines for jPicEdt graphics that
looked fine in version 1.3.7.
In order to test the system, I deinstalled 1.4.2, and made tried it with 1.4.1
with no
Eric Inazaki wrote:
Did it give you a message about not finding class files? There have
been instances where LyX installed properly but the configuration script
failed, and subsequently LyX would not start because it could not find
the requisite configuration information. (But it would at
Ares wrote:
Hello everyone,
I published a page about my tips and tricks on LyX, LATEX and BibTEX at:
http://www.webalice.it/ares001/job/Tips.htm
Let me know if you find it useful or if you find any error...
Good work. But why don't you add this to the LyX Wiki:
http://wiki.lyx.org/
Some
Eugenio wrote:
I've been using lyx 1.3.7 on windows XP for quite a while and everything is
working fine.
When I made the switch to 1.4.2, I lost the lines for jPicEdt graphics that
looked fine in version 1.3.7.
Are the graphics incorrectly be displayed inside LyX but correctly in
the
Right after I installed lyx, it spent a lot of time downloading stuff.
Lyx is checking for some classes, miktex does not have them so it
installs them automatically. 1.4.3 will give you more prompt
information, but this process will take the same long time.
Windows being Windows, the most
I forgot to mention that graphics display right in the output. The problem
is only inside Lyx.
I'm using Imagemagick 6.2.3 dated 06/08/05 and is the same used for 1.3.7
Eugenio
- Original Message -
From: Uwe Stöhr [EMAIL PROTECTED]
To: Eugenio [EMAIL PROTECTED]
Cc:
Eugenio wrote:
I forgot to mention that graphics display right in the output. The problem
is only inside Lyx.
I'm using Imagemagick 6.2.3 dated 06/08/05 and is the same used for 1.3.7
Then please file a bug report at
bugzilla.lyx.org
and attach there a problematic jPicEdt-file.
regards Uwe
Hi, all,
I ended up sending this message in a reply to another message which it
has nothing to do with, so I'm re-sending it. It could be that no one had
anything to say in the first place -- I apologize for cluttering up the list
with a reposting if that's the case!
At the end of my
Ed Gatzke wrote:
It is an odd behavior to lose the error dialog under a window.
It gets buried because I tell Lyx to export pdf then switch to another
application. The error dialog takes a while to pop up and ends up under
the other application.
This sort of thing occurs to me occasionally
The last time I tried counting I found more than 17 different vector
drawing applications that are suitable for use with LaTeX/LyX documents.
I've used Tgif, Xfig, jpicedt, IDE, and PSTricks. Each has strengths and
weaknesses, so I use whichever seems to be the best for a particular type of
Hello all.
I'm using LyX 1.4.2 from Debian sid Package and I have trouble with
euro symbol. When I press altgr+e the euro symbol is correctly
inserted in a QT-dialog but it doesn't work in the main document. When
pasting the euro symbol from clipboard a «?» gets inserted instead of
«€» and this
On Thu, 3 Aug 2006, Jordi Nadal wrote:
I'm using LyX 1.4.2 from Debian sid Package and I have trouble with euro
symbol. When I press altgr+e the euro symbol is correctly inserted in a
QT-dialog but it doesn't work in the main document. When pasting the euro
symbol from clipboard a «?» gets
Is it possible to set specific alignment to cells in the same column?
This would be useful when some cells contain numbers, whereas others contain
numbers.
I remember it was possible too align cells to the decimal point, but i do
not remember how to do; any hints?
thanks
--pol
pol wrote:
Is it possible to set specific alignment to cells in the same column?
This would be useful when some cells contain numbers, whereas others
contain numbers.
yes, if you make the single cells multicolumn cells.
I remember it was possible too align cells to the decimal point, but i
Hi
is there anywhere an example on how to use chapterbib? I don't seem to
be able to get it to work and I need Bibliographies per chapter (each
chapter in an included sub-document)
Thanks
Rainer
--
Rainer M. Krug, Dipl. Phys. (Germany), MSc Conservation
Biology (UCT)
Department of
It's discussed in section 12.6 of /The LaTeX Companion/.
Richard
Rainer M Krug wrote:
Hi
is there anywhere an example on how to use chapterbib? I don't seem to
be able to get it to work and I need Bibliographies per chapter (each
chapter in an included sub-document)
Thanks
Rainer
LB wrote:
I uninstalled Lyx and reinstalled it into c:\lyx\lyx14. This solved
my figure problem!!!
Thank you. I can now use 1.4.2
Looks like I spoke too soon. Now a different figure does not want to be
displayed.
Leo
Does it display the same old symptoms; it works with lyx.exe
or
Ed Gatzke wrote:
Is there any way to turn off the dialog for export errors, for The file already
exists, Overwrite?
I don't think so (short of modifying the source and recompiling).
I select export and switch to another application, a few second later the error
dialog get buried (on XP), and
Bonjour à tous ,
Je suis en train de rédiger mon mémoire de thèse sous Lyx, tout se passe très
bien à l'exception d'un détail : je n'arrive pas à centrer horizontalement les
figures que j'insère dans les espaces « figure flottante »
A part l'utilisation, lourde et génératrice d'erreurs, de
If I understand the question correctly, you need to change the
paragraph setting within the figure to be centered instead of
justified.
On Aug 2, 2006, at 10:27 AM, THIBAULT Florent wrote:
Bonjour à tous ,
Je suis en train de rédiger mon mémoire de thèse sous Lyx, tout se
passe très
Jason,
I can confirm that your patch still works for LyX 1.4.2 - I had
actually tried this a week ago on an Intel Mac. That patch is a life
saver for emacs people! I'll post the LyX 1.4.2 Mac Intel version
with the key patch on my site in a few minutes (just the
application). I won't be
Thank you all,
with your help I have finally tamed the beast.
(one of the problems was, that the path to the qt-directory was not
correct... for all future readers: (K)ubuntus qt-path
is: /usr/share/qt, not /usr/lib nor /usr/lib/qt neither whatsoever ...)
Best greetings
Christopher
Hello all,
sorry, I keep on asking for help ...
After finally being able to compile lyx (1.4.2) with Kubuntu (Dapper),
there is one thing that sucks a little bit.
If I want to run lyx in German, all umlauts in the menues are distorted.
No problem, I thought, let's start lyx with:
LANG=de_DE;
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I tried reinstalling to C:\ and that
works okay. Looking through some of these older messages, it
Eric Inazaki wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way.
No, it works fine from C:\Program Files\...
This happened to me on my first
installation attempt. I tried reinstalling to C:\ and
On 8/2/06, Eric Inazaki [EMAIL PROTECTED] wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I tried reinstalling to C:\ and that
works okay.
Paul A. Rubin [EMAIL PROTECTED] writes:
Eric Inazaki wrote:
Did it give you a message about not finding class files? There have
been instances where LyX installed properly but the configuration script
failed, and subsequently LyX would not start because it could not find
the
Bo Peng [EMAIL PROTECTED] writes:
On 8/2/06, Eric Inazaki [EMAIL PROTECTED] wrote:
Does lyx choke (i.e. fail to start) when it's installed in
C:\Program Files directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I
Hello everyone,
I published a page about my tips and tricks on LyX, LATEX and BibTEX at:
http://www.webalice.it/ares001/job/Tips.htm
Let me know if you find it useful or if you find any error...
Regards,
Diego
Can you click the Show Desktop icon (or type Win-D, where Win is the
Windows key) to minimize everything, then click the LyX button in the
task bar and get to the dialog?
I can just as easily Alt-Tab to the Lyx window or click on the taskbar.
It is an odd behavior to lose the error
Hi all,
I've been using lyx 1.3.7 on windows XP for quite a while and everything is
working fine.
When I made the switch to 1.4.2, I lost the lines for jPicEdt graphics that
looked fine in version 1.3.7.
In order to test the system, I deinstalled 1.4.2, and made tried it with 1.4.1
with no
Eric Inazaki wrote:
Did it give you a message about not finding class files? There have
been instances where LyX installed properly but the configuration script
failed, and subsequently LyX would not start because it could not find
the requisite configuration information. (But it would at
Ares wrote:
Hello everyone,
I published a page about my tips and tricks on LyX, LATEX and BibTEX at:
http://www.webalice.it/ares001/job/Tips.htm
Let me know if you find it useful or if you find any error...
Good work. But why don't you add this to the LyX Wiki:
http://wiki.lyx.org/
Some
Eugenio wrote:
I've been using lyx 1.3.7 on windows XP for quite a while and everything is
working fine.
When I made the switch to 1.4.2, I lost the lines for jPicEdt graphics that
looked fine in version 1.3.7.
Are the graphics incorrectly be displayed inside LyX but correctly in
the
Right after I installed lyx, it spent a lot of time downloading stuff.
Lyx is checking for some classes, miktex does not have them so it
installs them automatically. 1.4.3 will give you more prompt
information, but this process will take the same long time.
Windows being Windows, the most
I forgot to mention that graphics display right in the output. The problem
is only inside Lyx.
I'm using Imagemagick 6.2.3 dated 06/08/05 and is the same used for 1.3.7
Eugenio
- Original Message -
From: Uwe Stöhr [EMAIL PROTECTED]
To: Eugenio [EMAIL PROTECTED]
Cc:
Eugenio wrote:
I forgot to mention that graphics display right in the output. The problem
is only inside Lyx.
I'm using Imagemagick 6.2.3 dated 06/08/05 and is the same used for 1.3.7
Then please file a bug report at
bugzilla.lyx.org
and attach there a problematic jPicEdt-file.
regards Uwe
Hi, all,
I ended up sending this message in a reply to another message which it
has nothing to do with, so I'm re-sending it. It could be that no one had
anything to say in the first place -- I apologize for cluttering up the list
with a reposting if that's the case!
At the end of my
Ed Gatzke wrote:
It is an odd behavior to lose the error dialog under a window.
It gets buried because I tell Lyx to export pdf then switch to another
application. The error dialog takes a while to pop up and ends up under
the other application.
This sort of thing occurs to me occasionally
The last time I tried counting I found more than 17 different vector
drawing applications that are suitable for use with LaTeX/LyX documents.
I've used Tgif, Xfig, jpicedt, IDE, and PSTricks. Each has strengths and
weaknesses, so I use whichever seems to be the best for a particular type of
Hello all.
I'm using LyX 1.4.2 from Debian sid Package and I have trouble with
euro symbol. When I press altgr+e the euro symbol is correctly
inserted in a QT-dialog but it doesn't work in the main document. When
pasting the euro symbol from clipboard a «?» gets inserted instead of
«€» and this
On Thu, 3 Aug 2006, Jordi Nadal wrote:
I'm using LyX 1.4.2 from Debian sid Package and I have trouble with euro
symbol. When I press altgr+e the euro symbol is correctly inserted in a
QT-dialog but it doesn't work in the main document. When pasting the euro
symbol from clipboard a «?» gets
Is it possible to set specific alignment to cells in the same column?
This would be useful when some cells contain numbers, whereas others contain
numbers.
I remember it was possible too align cells to the decimal point, but i do
not remember how to do; any hints?
thanks
--pol
pol wrote:
> Is it possible to set specific alignment to cells in the same column?
> This would be useful when some cells contain numbers, whereas others
> contain numbers.
yes, if you make the single cells "multicolumn" cells.
> I remember it was possible too align cells to the decimal point,
Hi
is there anywhere an example on how to use chapterbib? I don't seem to
be able to get it to work and I need Bibliographies per chapter (each
chapter in an included sub-document)
Thanks
Rainer
--
Rainer M. Krug, Dipl. Phys. (Germany), MSc Conservation
Biology (UCT)
Department of
It's discussed in section 12.6 of /The LaTeX Companion/.
Richard
Rainer M Krug wrote:
> Hi
>
> is there anywhere an example on how to use chapterbib? I don't seem to
> be able to get it to work and I need Bibliographies per chapter (each
> chapter in an included sub-document)
>
> Thanks
>
>
LB wrote:
I uninstalled Lyx and reinstalled it into c:\lyx\lyx14. This solved
my figure problem!!!
Thank you. I can now use 1.4.2
Looks like I spoke too soon. Now a different figure does not want to be
displayed.
Leo
Does it display the same old symptoms; it works with lyx.exe
or
Ed Gatzke wrote:
Is there any way to turn off the dialog for export errors, for "The file already
exists, Overwrite?"
I don't think so (short of modifying the source and recompiling).
I select export and switch to another application, a few second later the error
dialog get buried (on XP),
Bonjour à tous ,
Je suis en train de rédiger mon mémoire de thèse sous Lyx, tout se passe très
bien à l'exception d'un détail : je n'arrive pas à centrer horizontalement les
figures que j'insère dans les espaces « figure flottante »
A part l'utilisation, lourde et génératrice d'erreurs, de
If I understand the question correctly, you need to change the
paragraph setting within the figure to be "centered" instead of
"justified."
On Aug 2, 2006, at 10:27 AM, THIBAULT Florent wrote:
Bonjour à tous ,
Je suis en train de rédiger mon mémoire de thèse sous Lyx, tout se
passe très
Jason,
I can confirm that your patch still works for LyX 1.4.2 - I had
actually tried this a week ago on an Intel Mac. That patch is a life
saver for emacs people! I'll post the LyX 1.4.2 Mac Intel version
with the key patch on my site in a few minutes (just the
application). I won't be
Thank you all,
with your help I have finally tamed the beast.
(one of the problems was, that the path to the qt-directory was not
correct... for all future readers: (K)ubuntus qt-path
is: /usr/share/qt, not /usr/lib nor /usr/lib/qt neither whatsoever ...)
Best greetings
Christopher
Hello all,
sorry, I keep on asking for help ...
After finally being able to compile lyx (1.4.2) with Kubuntu (Dapper),
there is one thing that sucks a little bit.
If I want to run lyx in German, all umlauts in the menues are distorted.
No problem, I thought, let's start lyx with:
LANG=de_DE;
Does lyx choke (i.e. fail to start) when it's installed in
"C:\Program Files" directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I tried reinstalling to "C:\" and that
works okay. Looking through some of these older messages,
Eric Inazaki wrote:
Does lyx choke (i.e. fail to start) when it's installed in
"C:\Program Files" directory? This is with lyx 1.4.2 and
Windows 2000, by the way.
No, it works fine from C:\Program Files\...
This happened to me on my first
installation attempt. I tried reinstalling to "C:\"
On 8/2/06, Eric Inazaki <[EMAIL PROTECTED]> wrote:
Does lyx choke (i.e. fail to start) when it's installed in
"C:\Program Files" directory? This is with lyx 1.4.2 and
Windows 2000, by the way. This happened to me on my first
installation attempt. I tried reinstalling to "C:\" and that
works
Paul A. Rubin <[EMAIL PROTECTED]> writes:
>
> Eric Inazaki wrote:
>
> Did it give you a message about not finding class files? There have
> been instances where LyX installed properly but the configuration script
> failed, and subsequently LyX would not start because it could not find
> the
Bo Peng <[EMAIL PROTECTED]> writes:
>
> On 8/2/06, Eric Inazaki <[EMAIL PROTECTED]> wrote:
> > Does lyx choke (i.e. fail to start) when it's installed in
> > "C:\Program Files" directory? This is with lyx 1.4.2 and
> > Windows 2000, by the way. This happened to me on my first
> > installation
Hello everyone,
I published a page about my tips and tricks on LyX, LATEX and BibTEX at:
http://www.webalice.it/ares001/job/Tips.htm
Let me know if you find it useful or if you find any error...
Regards,
Diego
> Can you click the "Show Desktop" icon (or type Win-D, where Win is the
> Windows key) to minimize everything, then click the LyX button in the
> task bar and get to the dialog?
>
I can just as easily Alt-Tab to the Lyx window or click on the taskbar.
It is an odd behavior to lose the
Hi all,
I've been using lyx 1.3.7 on windows XP for quite a while and everything is
working fine.
When I made the switch to 1.4.2, I lost the lines for jPicEdt graphics that
looked fine in version 1.3.7.
In order to test the system, I deinstalled 1.4.2, and made tried it with 1.4.1
with no
Eric Inazaki wrote:
Did it give you a message about not finding class files? There have
been instances where LyX installed properly but the configuration script
failed, and subsequently LyX would not start because it could not find
the requisite configuration information. (But it would at
Ares wrote:
Hello everyone,
I published a page about my tips and tricks on LyX, LATEX and BibTEX at:
http://www.webalice.it/ares001/job/Tips.htm
Let me know if you find it useful or if you find any error...
Good work. But why don't you add this to the LyX Wiki:
http://wiki.lyx.org/
Some
Eugenio wrote:
I've been using lyx 1.3.7 on windows XP for quite a while and everything is
working fine.
When I made the switch to 1.4.2, I lost the lines for jPicEdt graphics that
looked fine in version 1.3.7.
Are the graphics incorrectly be displayed inside LyX but correctly in
the
> Right after I installed lyx, it spent a lot of time downloading stuff.
Lyx is checking for some classes, miktex does not have them so it
installs them automatically. 1.4.3 will give you more prompt
information, but this process will take the same long time.
Windows being Windows, the most
I forgot to mention that graphics display right in the output. The problem
is only inside Lyx.
I'm using Imagemagick 6.2.3 dated 06/08/05 and is the same used for 1.3.7
Eugenio
- Original Message -
From: "Uwe Stöhr" <[EMAIL PROTECTED]>
To: "Eugenio" <[EMAIL PROTECTED]>
Cc:
Eugenio wrote:
I forgot to mention that graphics display right in the output. The problem
is only inside Lyx.
I'm using Imagemagick 6.2.3 dated 06/08/05 and is the same used for 1.3.7
Then please file a bug report at
bugzilla.lyx.org
and attach there a problematic jPicEdt-file.
regards Uwe
Hi, all,
I ended up sending this message in a "reply" to another message which it
has nothing to do with, so I'm re-sending it. It could be that no one had
anything to say in the first place -- I apologize for cluttering up the list
with a reposting if that's the case!
At the end of my
Ed Gatzke wrote:
It is an odd behavior to lose the error dialog under a window.
It gets buried because I tell Lyx to export pdf then switch to another
application. The error dialog takes a while to pop up and ends up under
the other application.
This sort of thing occurs to me occasionally
The last time I tried counting I found more than 17 different vector
drawing applications that are suitable for use with LaTeX/LyX documents.
I've used Tgif, Xfig, jpicedt, IDE, and PSTricks. Each has strengths and
weaknesses, so I use whichever seems to be the best for a particular type of
Hello all.
I'm using LyX 1.4.2 from Debian sid Package and I have trouble with
euro symbol. When I press altgr+e the euro symbol is correctly
inserted in a QT-dialog but it doesn't work in the main document. When
pasting the euro symbol from clipboard a «?» gets inserted instead of
«€» and this
On Thu, 3 Aug 2006, Jordi Nadal wrote:
I'm using LyX 1.4.2 from Debian sid Package and I have trouble with euro
symbol. When I press altgr+e the euro symbol is correctly inserted in a
QT-dialog but it doesn't work in the main document. When pasting the euro
symbol from clipboard a «?» gets
90 matches
Mail list logo