Re: LaTeX commands instead of KB shortcuts

Have you tried to add a customized keyboard shortcut for your own commands? That might work. But I think recognizing the leading \ can be a problem. I use keyboard shorcuts for everything and I find it to be very efficient (most of the time less keystrokes compared to the corresponding latex

Re: Debugging python scripts called by LyX

Paul A. Rubin ha scritto: Giovanni Luca Ciampaglia wrote: insetgraphics::latex: Filename = C:/Documents and Settings/Administrator/My Documents/Tesi/usi_terreno.eps Message = Opts = scale=0.75

Re: Problem with formulas (AMS package used)

Hi Uwe thanks for the tip (Yea, I am German and I just downloaded the manual!)- but my problems are with the subscripts, e.g. a_{WB_NE} where I would like to have the WB_NE in a smaller font as it looks strange with the same font size - or I am just used to the Word / OOWriter format? Rainer

Is it easy to add collaboration feature into LyX?

Hi all, I am interested and looking for a way to add collaboration functionalities into LyX. LyX made communications and collaboration in math easy because everything is in text mode (at least for math equations, which is my primary interest). The peer-to-peer connection can be very fast and

Is there a way to make the output of Export to Plain Latex more readable?

Hi all, The current LyX makes even the display-formulaes inline. Let's say I've imported my colleague's article, which was handwritten in plain latex and WinEdt without using LyX. The original format was readable and editable by a human-being, as below: -- blah blah

Re: TIPA+Instant Preview in 1.4.2

Maria Gouskova wrote: I just saw (http://www.lyx.org/announce/1_4_2.txt) that LyX now supports TIPA directly, yet in a very rudimental way. I.e. it loads the tipa package when needed. The following, though, does not: \textschwa [EMAIL PROTECTED] [EMAIL PROTECTED] \textipa{YES}

Re: Is there a way to make the output of Export to Plain Latex more readable?

Am Montag, 14. August 2006 09:34 schrieb Michael: Hi all, The current LyX makes even the display-formulaes inline. [snip] Is there a way to change the output as I want it to be? The easiest solution would be running the output of Export to Plain Latex through a LaTeX-equivalent of tidy

memoir ToC

Hi folks I am using Lyx 1.4.2 on Ubuntu Dapper. When I try and insert a table of contents into the file, and view a DVI or export, I get the following error: \tableofcontents* A number should have been here; I inserted `0'. (If you can't figure out why I needed to see

Re: One bibliography, separated by chapter?

So I have to change back from bibtexall to bibtex when I am not using chapterbib or can I always use bibtexall? Rainer Juergen Spitzmueller wrote: Juergen Spitzmueller wrote: I just tried myself, and I couldn't get it to work as well. My guess is that you have to export your files to latex

Re: Is there a way to make the output of Export to Plain Latex more readable?

Michael wrote: Let's say I've imported my colleague's article, which was handwritten in plain latex and WinEdt without using LyX. The original format was readable and editable by a human-being, as below: -- blah blah blah \begin{align} blah blah blah \end{align} blah

Re: One bibliography, separated by chapter?

Rainer M Krug wrote: So I have to change back from bibtexall to bibtex when I am not using chapterbib or can I always use bibtexall? You can always use it, basically. Some drawbacks perhaps: - it is probably slower than bibtex, because it searches all aux files in the temp dir and runs bibtex

Copying and pasting

My wife is doing some work in which she pastes lots of text from mails and other places, most of the on UTF-8 and pastes it on Lyx, but Lyx uses Latin-1, so she ends up with a lot of weird characters. Any ideas how to solve the problem ? something that is agile ? If upgrading to 4.0 is needed,

Re: Copying and pasting

Pupeno wrote: My wife is doing some work in which she pastes lots of text from mails and other places, most of the on UTF-8 and pastes it on Lyx, but Lyx uses Latin-1, so she ends up with a lot of weird characters. Any ideas how to solve the problem ? something that is agile ? What's your

RE: Equation numbering

Dear Richard, Jens and Uwe In the process of installing remreset.sty I noticed that it is already installed in Miktex in texmf/tex/latex/carlisle so I am assuming therefore that the commands [EMAIL PROTECTED] \renewcommand{\theequation}{\arabic{equation}} in my preamble will

Re: Problem with formulas (AMS package used)

Rainer M Krug schrieb: thanks for the tip (Yea, I am German and I just downloaded the manual!)- but my problems are with the subscripts, e.g. a_{WB_NE} where I would like to have the WB_NE in a smaller font as it looks strange with the same font size They don't have the same size! You use a

Re: Problem with formulas (AMS package used)

Uwe Stöhr wrote: Rainer M Krug schrieb: thanks for the tip (Yea, I am German and I just downloaded the manual!)- but my problems are with the subscripts, e.g. a_{WB_NE} where I would like to have the WB_NE in a smaller font as it looks strange with the same font size They don't have the

Re: Copying and pasting

On Monday 14 August 2006 14:25, Pupeno wrote: My wife is doing some work in which she pastes lots of text from mails and other places, most of the on UTF-8 and pastes it on Lyx, but Lyx uses Latin-1, so she ends up with a lot of weird characters. Any ideas how to solve the problem ? something

Re: Problem with formulas (AMS package used)

Rainer M Krug schrieb: I don't understand what you mean with the next sentence: Note that subscripts with more than one character have to set upright to dive them from indices, see appendix A of the math manual. Which math manual are you referring to? The German one? Yes my german LyX

Re: TIPA+Instant Preview in 1.4.2

The following, though, does not work: \textschwa [EMAIL PROTECTED] [EMAIL PROTECTED] \textipa{YES} \textglotstop \textipa{?} All of them work for me. Note, however, that you have to type them as M-m \textipaspace[EMAIL PROTECTED] where the space creates the tipa inset. Does this help?

Re: TIPA+Instant Preview in 1.4.2

Maria Gouskova wrote: Does this help? It does, but only intermittently... What do you mean by that? And the glottal stop only works as \textglotstop. When I enter   \textipa ?, it still shows up as a question mark. Shouldn't it be a P instead of a ?? \textipa P works for me. Oh, well,

Re: Which directory to install into for MikTex?

I'd like the complete package of the MikTex 2.5 to be installed. Is there such an installer on Windows? If not, I may have to install the complete package separately. How do I make the paths in LyX pointed to the new MikTex 2.5 non-default paths easily? When I new from template in LyX 1.4.2,

Re: Which directory to install into for MikTex?

Good question, that's because the Latex format output by LyX is quite complicated and not human-readable... while a lot of people like to hand-edit the Latex document. On 8/13/06, Uwe Stöhr [EMAIL PROTECTED] wrote: Btw.: Why do yo need WinEdt when you have LyX?

Re: Equation numbering

You'll need to \usepackage{remreset}. Mike Reeks wrote: Dear Richard, Jens and Uwe In the process of installing remreset.sty I noticed that it is already installed in Miktex in texmf/tex/latex/carlisle so I am assuming therefore that the commands [EMAIL PROTECTED]

Re: Is there a way to make the output of Export to Plain Latex more readable?

Am Montag, 14. August 2006 20:49 schrieb Michael: Any hope of getting it work in the next release? Maybe. Maybe not. See my comment 6 in the bug report. Apart from that you would be surprised to see how difficult it is to get a readable output programmatically. Humans are far better here,

Re: Which directory to install into for MikTex?

Michael wrote: I'd like the complete package of the MikTex 2.5 to be installed. Is there such an installer on Windows? If not, I may have to install the complete package separately. How do I make the paths in LyX pointed to the new MikTex 2.5 non-default paths easily? When I new from template

Re: Is it easy to add collaboration feature into LyX?

Michael wrote: On 8/14/06, *TechTonics* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: Michael wrote: Hi all, I am interested and looking for a way to add collaboration functionalities into LyX. If you open a lyx file under Document there is an

RE: Equation numbering

Dear Richard, Thankyou for this vital piece of information. As you can tell I am a complete novice. Thanks for your time and patience. Best Mike From: Richard Heck [mailto:[EMAIL PROTECTED] Sent: Mon 14/08/2006 19:16 To: Mike Reeks Cc: Richard Heck; Jens

Re: Is there a way to make the output of Export to Plain Latex more readable?

On 8/14/06, Angus Leeming [EMAIL PROTECTED] wrote: Michael [EMAIL PROTECTED] writes: The original format was readable and editable by a human-being, as below: -- blah blah blah \begin{align} blah blah blah \end{align} blah blah blah --

Re: Is there a way to make the output of Export to Plain Latex more readable?

What a pity there is no Latex tidy around... Emacs + AUC Tex is too large for me, esp. I've already installed WinEdt and LyX ... On 8/14/06, Michael [EMAIL PROTECTED] wrote: On 8/14/06, Ingo Klöcker [EMAIL PROTECTED] wrote: Am Montag, 14. August 2006 09:34 schrieb Michael: Hi all,

Re: Is there a way to make the output of Export to Plain Latex more readable?

Any hope of getting it work in the next release? On 8/14/06, Michael [EMAIL PROTECTED] wrote: Any hope of getting it work in the next release? On 8/14/06, Uwe Stöhr [EMAIL PROTECTED] wrote: Michael wrote: Let's say I've imported my colleague's article, which was handwritten in plain

Re: Is it easy to add collaboration feature into LyX?

On 8/14/06, TechTonics [EMAIL PROTECTED] wrote: Michael wrote: Hi all, I am interested and looking for a way to add collaboration functionalities into LyX. If you open a lyx file under Document there is an option called Change Tracking. I don't think it is yet perfected.

Re: Is it easy to add collaboration feature into LyX?

Hi TechTonics, The one feature that I've mentioned is the real time communication, real-time math discussion, and real-time collaboration. I guess it is not exist in the current version of LyX. any more thoughts? I am interested in, right now, is a way to compare/diff two lyx documents (maybe

Re: Is it easy to add collaboration feature into LyX?

On 8/14/06, Bo Peng [EMAIL PROTECTED] wrote: Hi TechTonics, The one feature that I've mentioned is the real time communication, real-time math discussion, and real-time collaboration. I guess it is not exist in the current version of LyX. any more thoughts? I am interested in, right

Re: Which directory to install into for MikTex?

Michael schrieb: I'd like the complete package of the MikTex 2.5 to be installed. Is there such an installer on Windows? MiKTeX 2.5 isn't jet released as complete version. You don't really need a complete version. The installer (http://wiki.lyx.org/Windows/LyXWinInstaller) comes with MiKTeX

Re: LaTeX commands instead of KB shortcuts

Have you tried to add a customized keyboard shortcut for your own commands? That might work. But I think recognizing the leading \ can be a problem. I use keyboard shorcuts for everything and I find it to be very efficient (most of the time less keystrokes compared to the corresponding latex

Re: Debugging python scripts called by LyX

Paul A. Rubin ha scritto: Giovanni Luca Ciampaglia wrote: insetgraphics::latex: Filename = C:/Documents and Settings/Administrator/My Documents/Tesi/usi_terreno.eps Message = Opts = scale=0.75

Re: Problem with formulas (AMS package used)

Hi Uwe thanks for the tip (Yea, I am German and I just downloaded the manual!)- but my problems are with the subscripts, e.g. a_{WB_NE} where I would like to have the WB_NE in a smaller font as it looks strange with the same font size - or I am just used to the Word / OOWriter format? Rainer

Is it easy to add collaboration feature into LyX?

Hi all, I am interested and looking for a way to add collaboration functionalities into LyX. LyX made communications and collaboration in math easy because everything is in text mode (at least for math equations, which is my primary interest). The peer-to-peer connection can be very fast and

Is there a way to make the output of Export to Plain Latex more readable?

Hi all, The current LyX makes even the display-formulaes inline. Let's say I've imported my colleague's article, which was handwritten in plain latex and WinEdt without using LyX. The original format was readable and editable by a human-being, as below: -- blah blah

Re: TIPA+Instant Preview in 1.4.2

Maria Gouskova wrote: I just saw (http://www.lyx.org/announce/1_4_2.txt) that LyX now supports TIPA directly, yet in a very rudimental way. I.e. it loads the tipa package when needed. The following, though, does not: \textschwa [EMAIL PROTECTED] [EMAIL PROTECTED] \textipa{YES}

Re: Is there a way to make the output of Export to Plain Latex more readable?

Am Montag, 14. August 2006 09:34 schrieb Michael: Hi all, The current LyX makes even the display-formulaes inline. [snip] Is there a way to change the output as I want it to be? The easiest solution would be running the output of Export to Plain Latex through a LaTeX-equivalent of tidy

memoir ToC

Hi folks I am using Lyx 1.4.2 on Ubuntu Dapper. When I try and insert a table of contents into the file, and view a DVI or export, I get the following error: \tableofcontents* A number should have been here; I inserted `0'. (If you can't figure out why I needed to see

Re: One bibliography, separated by chapter?

So I have to change back from bibtexall to bibtex when I am not using chapterbib or can I always use bibtexall? Rainer Juergen Spitzmueller wrote: Juergen Spitzmueller wrote: I just tried myself, and I couldn't get it to work as well. My guess is that you have to export your files to latex

Re: Is there a way to make the output of Export to Plain Latex more readable?

Michael wrote: Let's say I've imported my colleague's article, which was handwritten in plain latex and WinEdt without using LyX. The original format was readable and editable by a human-being, as below: -- blah blah blah \begin{align} blah blah blah \end{align} blah

Re: One bibliography, separated by chapter?

Rainer M Krug wrote: So I have to change back from bibtexall to bibtex when I am not using chapterbib or can I always use bibtexall? You can always use it, basically. Some drawbacks perhaps: - it is probably slower than bibtex, because it searches all aux files in the temp dir and runs bibtex

Copying and pasting

My wife is doing some work in which she pastes lots of text from mails and other places, most of the on UTF-8 and pastes it on Lyx, but Lyx uses Latin-1, so she ends up with a lot of weird characters. Any ideas how to solve the problem ? something that is agile ? If upgrading to 4.0 is needed,

Re: Copying and pasting

Pupeno wrote: My wife is doing some work in which she pastes lots of text from mails and other places, most of the on UTF-8 and pastes it on Lyx, but Lyx uses Latin-1, so she ends up with a lot of weird characters. Any ideas how to solve the problem ? something that is agile ? What's your

RE: Equation numbering

Dear Richard, Jens and Uwe In the process of installing remreset.sty I noticed that it is already installed in Miktex in texmf/tex/latex/carlisle so I am assuming therefore that the commands [EMAIL PROTECTED] \renewcommand{\theequation}{\arabic{equation}} in my preamble will

Re: Problem with formulas (AMS package used)

Rainer M Krug schrieb: thanks for the tip (Yea, I am German and I just downloaded the manual!)- but my problems are with the subscripts, e.g. a_{WB_NE} where I would like to have the WB_NE in a smaller font as it looks strange with the same font size They don't have the same size! You use a

Re: Problem with formulas (AMS package used)

Uwe Stöhr wrote: Rainer M Krug schrieb: thanks for the tip (Yea, I am German and I just downloaded the manual!)- but my problems are with the subscripts, e.g. a_{WB_NE} where I would like to have the WB_NE in a smaller font as it looks strange with the same font size They don't have the

Re: Copying and pasting

On Monday 14 August 2006 14:25, Pupeno wrote: My wife is doing some work in which she pastes lots of text from mails and other places, most of the on UTF-8 and pastes it on Lyx, but Lyx uses Latin-1, so she ends up with a lot of weird characters. Any ideas how to solve the problem ? something

Re: Problem with formulas (AMS package used)

Rainer M Krug schrieb: I don't understand what you mean with the next sentence: Note that subscripts with more than one character have to set upright to dive them from indices, see appendix A of the math manual. Which math manual are you referring to? The German one? Yes my german LyX

Re: TIPA+Instant Preview in 1.4.2

The following, though, does not work: \textschwa [EMAIL PROTECTED] [EMAIL PROTECTED] \textipa{YES} \textglotstop \textipa{?} All of them work for me. Note, however, that you have to type them as M-m \textipaspace[EMAIL PROTECTED] where the space creates the tipa inset. Does this help?

Re: TIPA+Instant Preview in 1.4.2

Maria Gouskova wrote: Does this help? It does, but only intermittently... What do you mean by that? And the glottal stop only works as \textglotstop. When I enter   \textipa ?, it still shows up as a question mark. Shouldn't it be a P instead of a ?? \textipa P works for me. Oh, well,

Re: Which directory to install into for MikTex?

I'd like the complete package of the MikTex 2.5 to be installed. Is there such an installer on Windows? If not, I may have to install the complete package separately. How do I make the paths in LyX pointed to the new MikTex 2.5 non-default paths easily? When I new from template in LyX 1.4.2,

Re: Which directory to install into for MikTex?

Good question, that's because the Latex format output by LyX is quite complicated and not human-readable... while a lot of people like to hand-edit the Latex document. On 8/13/06, Uwe Stöhr [EMAIL PROTECTED] wrote: Btw.: Why do yo need WinEdt when you have LyX?

Re: Equation numbering

You'll need to \usepackage{remreset}. Mike Reeks wrote: Dear Richard, Jens and Uwe In the process of installing remreset.sty I noticed that it is already installed in Miktex in texmf/tex/latex/carlisle so I am assuming therefore that the commands [EMAIL PROTECTED]

Re: Is there a way to make the output of Export to Plain Latex more readable?

Am Montag, 14. August 2006 20:49 schrieb Michael: Any hope of getting it work in the next release? Maybe. Maybe not. See my comment 6 in the bug report. Apart from that you would be surprised to see how difficult it is to get a readable output programmatically. Humans are far better here,

Re: Which directory to install into for MikTex?

Michael wrote: I'd like the complete package of the MikTex 2.5 to be installed. Is there such an installer on Windows? If not, I may have to install the complete package separately. How do I make the paths in LyX pointed to the new MikTex 2.5 non-default paths easily? When I new from template

Re: Is it easy to add collaboration feature into LyX?

Michael wrote: On 8/14/06, *TechTonics* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: Michael wrote: Hi all, I am interested and looking for a way to add collaboration functionalities into LyX. If you open a lyx file under Document there is an

RE: Equation numbering

Dear Richard, Thankyou for this vital piece of information. As you can tell I am a complete novice. Thanks for your time and patience. Best Mike From: Richard Heck [mailto:[EMAIL PROTECTED] Sent: Mon 14/08/2006 19:16 To: Mike Reeks Cc: Richard Heck; Jens

Re: Is there a way to make the output of Export to Plain Latex more readable?

On 8/14/06, Angus Leeming [EMAIL PROTECTED] wrote: Michael [EMAIL PROTECTED] writes: The original format was readable and editable by a human-being, as below: -- blah blah blah \begin{align} blah blah blah \end{align} blah blah blah --

Re: Is there a way to make the output of Export to Plain Latex more readable?

What a pity there is no Latex tidy around... Emacs + AUC Tex is too large for me, esp. I've already installed WinEdt and LyX ... On 8/14/06, Michael [EMAIL PROTECTED] wrote: On 8/14/06, Ingo Klöcker [EMAIL PROTECTED] wrote: Am Montag, 14. August 2006 09:34 schrieb Michael: Hi all,

Re: Is there a way to make the output of Export to Plain Latex more readable?

Any hope of getting it work in the next release? On 8/14/06, Michael [EMAIL PROTECTED] wrote: Any hope of getting it work in the next release? On 8/14/06, Uwe Stöhr [EMAIL PROTECTED] wrote: Michael wrote: Let's say I've imported my colleague's article, which was handwritten in plain

Re: Is it easy to add collaboration feature into LyX?

On 8/14/06, TechTonics [EMAIL PROTECTED] wrote: Michael wrote: Hi all, I am interested and looking for a way to add collaboration functionalities into LyX. If you open a lyx file under Document there is an option called Change Tracking. I don't think it is yet perfected.

Re: Is it easy to add collaboration feature into LyX?

Hi TechTonics, The one feature that I've mentioned is the real time communication, real-time math discussion, and real-time collaboration. I guess it is not exist in the current version of LyX. any more thoughts? I am interested in, right now, is a way to compare/diff two lyx documents (maybe

Re: Is it easy to add collaboration feature into LyX?

On 8/14/06, Bo Peng [EMAIL PROTECTED] wrote: Hi TechTonics, The one feature that I've mentioned is the real time communication, real-time math discussion, and real-time collaboration. I guess it is not exist in the current version of LyX. any more thoughts? I am interested in, right

Re: Which directory to install into for MikTex?

Michael schrieb: I'd like the complete package of the MikTex 2.5 to be installed. Is there such an installer on Windows? MiKTeX 2.5 isn't jet released as complete version. You don't really need a complete version. The installer (http://wiki.lyx.org/Windows/LyXWinInstaller) comes with MiKTeX

Re: LaTeX commands instead of KB shortcuts

Have you tried to add a customized keyboard shortcut for your own commands? That might work. But I think recognizing the leading "\" can be a problem. I use keyboard shorcuts for everything and I find it to be very efficient (most of the time less keystrokes compared to the corresponding latex

Re: Debugging python scripts called by LyX

Paul A. Rubin ha scritto: > Giovanni Luca Ciampaglia wrote: > >> >> >> >> insetgraphics::latex: Filename = C:/Documents and >> Settings/Administrator/My Documents/Tesi/usi_terreno.eps >> Message = "" >>

Re: Problem with formulas (AMS package used)

Hi Uwe thanks for the tip (Yea, I am German and I just downloaded the manual!)- but my problems are with the subscripts, e.g. a_{WB_NE} where I would like to have the WB_NE in a smaller font as it looks strange with the same font size - or I am just used to the Word / OOWriter format? Rainer

Is it easy to add collaboration feature into LyX?

Hi all, I am interested and looking for a way to add collaboration functionalities into LyX. LyX made communications and collaboration in math easy because everything is in text mode (at least for math equations, which is my primary interest). The peer-to-peer connection can be very fast and

Is there a way to make the output of "Export to Plain Latex" more readable?

Hi all, The current LyX makes even the display-formulaes inline. Let's say I've imported my colleague's article, which was handwritten in plain latex and WinEdt without using LyX. The original format was readable and editable by a human-being, as below: -- blah blah

Re: TIPA+Instant Preview in 1.4.2

Maria Gouskova wrote: > I just saw (http://www.lyx.org/announce/1_4_2.txt) that LyX now > supports TIPA directly, yet in a very rudimental way. I.e. it loads the tipa package when needed. > The following, though, does not: > > \textschwa > [EMAIL PROTECTED] > [EMAIL PROTECTED] > \textipa{YES} >

Re: Is there a way to make the output of "Export to Plain Latex" more readable?

Am Montag, 14. August 2006 09:34 schrieb Michael: > Hi all, > > The current LyX makes even the display-formulaes inline. [snip] > Is there a way to change the output as I want it to be? The easiest solution would be running the output of "Export to Plain Latex" through a LaTeX-equivalent of tidy

memoir ToC

Hi folks I am using Lyx 1.4.2 on Ubuntu Dapper. When I try and insert a table of contents into the file, and view a DVI or export, I get the following error: \tableofcontents* A number should have been here; I inserted `0'. (If you can't figure out why I needed to see

Re: One bibliography, separated by chapter?

So I have to change back from bibtexall to bibtex when I am not using chapterbib or can I always use bibtexall? Rainer Juergen Spitzmueller wrote: > Juergen Spitzmueller wrote: >> I just tried myself, and I couldn't get it to work as well. My guess is >> that you have to export your files to

Re: Is there a way to make the output of "Export to Plain Latex" more readable?

Michael wrote: Let's say I've imported my colleague's article, which was handwritten in plain latex and WinEdt without using LyX. The original format was readable and editable by a human-being, as below: -- blah blah blah \begin{align} blah blah blah \end{align} blah

Re: One bibliography, separated by chapter?

Rainer M Krug wrote: > So I have to change back from bibtexall to bibtex when I am not using > chapterbib or can I always use bibtexall? You can always use it, basically. Some drawbacks perhaps: - it is probably slower than bibtex, because it searches all aux files in the temp dir and runs

Copying and pasting

My wife is doing some work in which she pastes lots of text from mails and other places, most of the on UTF-8 and pastes it on Lyx, but Lyx uses Latin-1, so she ends up with a lot of weird characters. Any ideas how to solve the problem ? something that is agile ? If upgrading to 4.0 is needed,

Re: Copying and pasting

Pupeno wrote: > My wife is doing some work in which she pastes lots of text from mails and > other places, most of the on UTF-8 and pastes it on Lyx, but Lyx uses > Latin-1, so she ends up with a lot of weird characters. Any ideas how to > solve the problem ? something that is agile ? What's your

RE: Equation numbering

Dear Richard, Jens and Uwe In the process of installing remreset.sty I noticed that it is already installed in Miktex in texmf/tex/latex/carlisle so I am assuming therefore that the commands [EMAIL PROTECTED] \renewcommand{\theequation}{\arabic{equation}} in my preamble will

Re: Problem with formulas (AMS package used)

Rainer M Krug schrieb: thanks for the tip (Yea, I am German and I just downloaded the manual!)- but my problems are with the subscripts, e.g. a_{WB_NE} where I would like to have the WB_NE in a smaller font as it looks strange with the same font size They don't have the same size! You use a

Re: Problem with formulas (AMS package used)

Uwe Stöhr wrote: > Rainer M Krug schrieb: > >> thanks for the tip (Yea, I am German and I just downloaded the manual!)- >> but my problems are with the subscripts, e.g. a_{WB_NE} where I would >> like to have the WB_NE in a smaller font as it looks strange with the >> same font size > > They

Re: Copying and pasting

On Monday 14 August 2006 14:25, Pupeno wrote: > My wife is doing some work in which she pastes lots of text from mails and > other places, most of the on UTF-8 and pastes it on Lyx, but Lyx uses > Latin-1, so she ends up with a lot of weird characters. Any ideas how to > solve the problem ?

Re: Problem with formulas (AMS package used)

Rainer M Krug schrieb: I don't understand what you mean with the next sentence: Note that subscripts with more than one character have to set upright to dive them from indices, see appendix A of the math manual. Which math manual are you referring to? The German one? Yes my german LyX

Re: TIPA+Instant Preview in 1.4.2

The following, though, does not : \textschwa [EMAIL PROTECTED] [EMAIL PROTECTED] \textipa{YES} \textglotstop \textipa{?} All of them work for me. Note, however, that you have to type them as M-m \textipa[EMAIL PROTECTED] where the space creates the tipa inset. Does this help? It does,

Re: TIPA+Instant Preview in 1.4.2

Maria Gouskova wrote: > > Does this help? > > It does, but only intermittently... What do you mean by that? > And the glottal stop only works as \textglotstop. When I enter   > "\textipa ?", it still shows up as a question mark. Shouldn't it be a instead of a ? "\textipa P" works for me. >

Re: Which directory to install into for MikTex?

I'd like the complete package of the MikTex 2.5 to be installed. Is there such an installer on Windows? If not, I may have to install the complete package separately. How do I make the paths in LyX pointed to the new MikTex 2.5 non-default paths easily? When I "new from template" in LyX 1.4.2,

Re: Which directory to install into for MikTex?

Good question, that's because the Latex format output by LyX is quite complicated and not human-readable... while a lot of people like to hand-edit the Latex document. On 8/13/06, Uwe Stöhr <[EMAIL PROTECTED]> wrote: Btw.: Why do yo need WinEdt when you have LyX?

Re: Equation numbering

You'll need to \usepackage{remreset}. Mike Reeks wrote: Dear Richard, Jens and Uwe In the process of installing remreset.sty I noticed that it is already installed in Miktex in texmf/tex/latex/carlisle so I am assuming therefore that the commands [EMAIL PROTECTED]

Re: Is there a way to make the output of "Export to Plain Latex" more readable?

Am Montag, 14. August 2006 20:49 schrieb Michael: > Any hope of getting it work in the next release? Maybe. Maybe not. See my comment 6 in the bug report. Apart from that you would be surprised to see how difficult it is to get a readable output programmatically. Humans are far better here,

Re: Which directory to install into for MikTex?

Michael wrote: I'd like the complete package of the MikTex 2.5 to be installed. Is there such an installer on Windows? If not, I may have to install the complete package separately. How do I make the paths in LyX pointed to the new MikTex 2.5 non-default paths easily? When I "new from

Re: Is it easy to add collaboration feature into LyX?

Michael wrote: On 8/14/06, *TechTonics* <[EMAIL PROTECTED] > wrote: Michael wrote: > Hi all, > > I am interested and looking for a way to add collaboration functionalities > into LyX. > If you open a lyx file under Document

RE: Equation numbering

Dear Richard, Thankyou for this vital piece of information. As you can tell I am a complete novice. Thanks for your time and patience. Best Mike From: Richard Heck [mailto:[EMAIL PROTECTED] Sent: Mon 14/08/2006 19:16 To: Mike Reeks Cc: Richard Heck; Jens

Re: Is there a way to make the output of "Export to Plain Latex" more readable?

On 8/14/06, Angus Leeming <[EMAIL PROTECTED]> wrote: Michael <[EMAIL PROTECTED]> writes: > The original format was readable and editable by a human-being, as below: > > -- > blah blah blah > \begin{align} > blah blah blah > \end{align} > blah blah blah >

Re: Is there a way to make the output of "Export to Plain Latex" more readable?

What a pity there is no Latex tidy around... Emacs + AUC Tex is too large for me, esp. I've already installed WinEdt and LyX ... On 8/14/06, Michael <[EMAIL PROTECTED]> wrote: On 8/14/06, Ingo Klöcker <[EMAIL PROTECTED]> wrote: > > Am Montag, 14. August 2006 09:34 schrieb Michael: > > Hi

Re: Is there a way to make the output of "Export to Plain Latex" more readable?

Any hope of getting it work in the next release? On 8/14/06, Michael <[EMAIL PROTECTED]> wrote: Any hope of getting it work in the next release? On 8/14/06, Uwe Stöhr <[EMAIL PROTECTED]> wrote: > > Michael wrote: > > > Let's say I've imported my colleague's article, which was handwritten >

Re: Is it easy to add collaboration feature into LyX?

On 8/14/06, TechTonics <[EMAIL PROTECTED]> wrote: Michael wrote: > Hi all, > > I am interested and looking for a way to add collaboration functionalities > into LyX. > If you open a lyx file under Document there is an option called Change Tracking. I don't think it is yet perfected.

Re: Is it easy to add collaboration feature into LyX?

Hi TechTonics, The one feature that I've mentioned is the real time communication, real-time math discussion, and real-time collaboration. I guess it is not exist in the current version of LyX. any more thoughts? I am interested in, right now, is a way to compare/diff two lyx documents (maybe

  1   2   >