Re: Please help me

> 11 juni 2024 kl. 15:51 skrev Christopher Menzel : > >> I have spent hours trying to figure out how one might be able to run BOTH >> LyX 2.4 and LyX 2.3.8 on the same Mac computer with a Silicon chip and Mac >> OS 14.5. No luck finding any useful information about this issue. >> Is this

Re: Please help me

> I have spent hours trying to figure out how one might be able to run BOTH LyX > 2.4 and LyX 2.3.8 on the same Mac computer with a Silicon chip and Mac OS > 14.5. No luck finding any useful information about this issue. > Is this possible? It’s not clear what you are asking. There should be no

Please help me

Desperately need help. I have spent hours trying to figure out how one might be able to run BOTH LyX 2.4 and LyX 2.3.8 on the same Mac computer with a Silicon chip and Mac OS 14.5. No luck finding any useful information about this issue. Is this possible? If so, how does one do it? Thanks

Re: Please help: how do I insert a list of my publications in an otherwise ready thesis?

On 11/16/18 5:36 PM, Polina Proutskova wrote: I have written my PhD thesis in LyX and have to do my minor corrections. I’ve been asked to put a list of my publications in the thesis. What is the proper way to do it? My suggestion is rather brutal. That is to create a separate document for

Re: Please help: how do I insert a list of my publications in an otherwise ready thesis?

Am Samstag, den 17.11.2018, 01:36 + schrieb Polina Proutskova: > The publications list should include my publications (I have created > an extra bib file for it in case that helps), sorted by year, ideally > something like here: https://wiki.lyx.org/BibTeX/Publist#toc3, in > other words,

Re: Please help: how do I insert a list of my publications in an otherwise ready thesis?

On Sat, 17 Nov 2018, Polina Proutskova wrote: I have written my PhD thesis in LyX and have to do my minor corrections. I’ve been asked to put a list of my publications in the thesis. What is the proper way to do it? Polina, I doubt there is a 'proper' way, only one acceeptable to your

Re: Issue with lyx PLEASE HELP

in the Tools menu. Stephan Subject: Re: Issue with lyx PLEASE HELP From: st.w...@gmx.net Date: Sat, 8 Nov 2014 23:07:39 +0100 CC: lyx-users@lists.lyx.org To: knowledgegal...@hotmail.com Am 08.11.2014 um 22:44 schrieb V N knowledgegal...@hotmail.com: I have version: LyX Version 2.1.2.2

Re: Issue with lyx PLEASE HELP

in the Tools menu. Stephan Subject: Re: Issue with lyx PLEASE HELP From: st.w...@gmx.net Date: Sat, 8 Nov 2014 23:07:39 +0100 CC: lyx-users@lists.lyx.org To: knowledgegal...@hotmail.com Am 08.11.2014 um 22:44 schrieb V N knowledgegal...@hotmail.com: I have version: LyX Version 2.1.2.2

Re: Issue with lyx PLEASE HELP

the latex compiler. With MacTeX this shouldn't happen. Please try to Reconfigure LyX and try again. Reconfigure resides in the Tools menu. Stephan >>> Subject: Re: Issue with lyx PLEASE HELP >>> From: st.w...@gmx.net >>> Date: Sat, 8 Nov 2014 23:07:39 +0100 >

Re: Issue with lyx PLEASE HELP

: The directory path to the document cannot contain spaces. I am not a tech guy so although I have read some forums where people had the issue I still need some step by step advice. Can you please HELP?! I need to make pdf's ASAP. Thank you for your time. Are you able to run LyX from the terminal

Re: Issue with lyx PLEASE HELP

. Regards, Stephan Then when I pressed the Subject: Re: Issue with lyx PLEASE HELP From: st.w...@gmx.net Date: Sat, 8 Nov 2014 21:04:25 +0100 To: knowledgegal...@hotmail.com Am 08.11.2014 um 20:35 schrieb V N knowledgegal...@hotmail.com: I'm not sure how to run it from

RE: Issue with lyx PLEASE HELP

to my file. Then I go to documents and the latex log is grey. I'm not able to choose it. Is there another way I can send you it to you? Again, thank you for your patience. Subject: Re: Issue with lyx PLEASE HELP From: st.w...@gmx.net Date: Sat, 8 Nov 2014 22:14:04 +0100 CC: lyx-users

Re: Issue with lyx PLEASE HELP

. Regards, Stephan Subject: Re: Issue with lyx PLEASE HELP From: st.w...@gmx.net Date: Sat, 8 Nov 2014 22:14:04 +0100 CC: lyx-users@lists.lyx.org To: knowledgegal...@hotmail.com Am 08.11.2014 um 21:29 schrieb V N knowledgegal...@hotmail.com: I installed the dmg file you sent me. I

RE: Issue with lyx PLEASE HELP

name error The directory path to the document cannot contain spaces. 14:24:58.081: Error while exporting format: PDF (pdflatex) Subject: Re: Issue with lyx PLEASE HELP From: st.w...@gmx.net Date: Sat, 8 Nov 2014 23:07:39 +0100 CC: lyx-users

Re: Issue with lyx PLEASE HELP

On Sat, 8 Nov 2014 22:27:04 + V N knowledgegal...@hotmail.com wrote: I'm not sure how to activate debug messages for Latex production. But I have deleted all of the spaces in the folder names of the location of my file and reopened and still have the following message in the message pane:

Re: Issue with lyx PLEASE HELP

On Sun, 9 Nov 2014 09:46:14 +1100 Charlie aries...@ipstarmail.com.au wrote: I'm late coming into this but I wonder if you think you have deleted the spaces or have in actual fact. If you copy and past your document into a text editor it might show up the space if you move your cursor through

Re: Issue with lyx PLEASE HELP

? Perhaps you are using V N for your account? That's also part of the directory path… Stephan Subject: Re: Issue with lyx PLEASE HELP From: st.w...@gmx.net Date: Sat, 8 Nov 2014 23:07:39 +0100 CC: lyx-users@lists.lyx.org To: knowledgegal...@hotmail.com Am 08.11.2014 um 22:44 schrieb V N

Re: Issue with lyx PLEASE HELP

: The directory path to the document cannot contain spaces. I am not a tech guy so although I have read some forums where people had the issue I still need some step by step advice. Can you please HELP?! I need to make pdf's ASAP. Thank you for your time. Are you able to run LyX from the terminal

Re: Issue with lyx PLEASE HELP

. Regards, Stephan Then when I pressed the Subject: Re: Issue with lyx PLEASE HELP From: st.w...@gmx.net Date: Sat, 8 Nov 2014 21:04:25 +0100 To: knowledgegal...@hotmail.com Am 08.11.2014 um 20:35 schrieb V N knowledgegal...@hotmail.com: I'm not sure how to run it from

RE: Issue with lyx PLEASE HELP

to my file. Then I go to documents and the latex log is grey. I'm not able to choose it. Is there another way I can send you it to you? Again, thank you for your patience. Subject: Re: Issue with lyx PLEASE HELP From: st.w...@gmx.net Date: Sat, 8 Nov 2014 22:14:04 +0100 CC: lyx-users

Re: Issue with lyx PLEASE HELP

. Regards, Stephan Subject: Re: Issue with lyx PLEASE HELP From: st.w...@gmx.net Date: Sat, 8 Nov 2014 22:14:04 +0100 CC: lyx-users@lists.lyx.org To: knowledgegal...@hotmail.com Am 08.11.2014 um 21:29 schrieb V N knowledgegal...@hotmail.com: I installed the dmg file you sent me. I

RE: Issue with lyx PLEASE HELP

name error The directory path to the document cannot contain spaces. 14:24:58.081: Error while exporting format: PDF (pdflatex) Subject: Re: Issue with lyx PLEASE HELP From: st.w...@gmx.net Date: Sat, 8 Nov 2014 23:07:39 +0100 CC: lyx-users

Re: Issue with lyx PLEASE HELP

On Sat, 8 Nov 2014 22:27:04 + V N knowledgegal...@hotmail.com wrote: I'm not sure how to activate debug messages for Latex production. But I have deleted all of the spaces in the folder names of the location of my file and reopened and still have the following message in the message pane:

Re: Issue with lyx PLEASE HELP

On Sun, 9 Nov 2014 09:46:14 +1100 Charlie aries...@ipstarmail.com.au wrote: I'm late coming into this but I wonder if you think you have deleted the spaces or have in actual fact. If you copy and past your document into a text editor it might show up the space if you move your cursor through

Re: Issue with lyx PLEASE HELP

? Perhaps you are using V N for your account? That's also part of the directory path… Stephan Subject: Re: Issue with lyx PLEASE HELP From: st.w...@gmx.net Date: Sat, 8 Nov 2014 23:07:39 +0100 CC: lyx-users@lists.lyx.org To: knowledgegal...@hotmail.com Am 08.11.2014 um 22:44 schrieb V N

Re: Issue with lyx PLEASE HELP

he file opens and I press the eyes to make a pdf, I get the message: > The directory path to the document cannot contain spaces. > > > > I am not a tech guy so although I have read some forums where people had the issue I still need some step by step advice. > > Can you please HELP?! I

Re: Issue with lyx PLEASE HELP

the list. You find it as LaTeX protocol in the Document menu. Regards, Stephan > Then when I pressed the > > > Subject: Re: Issue with lyx PLEASE HELP > > From: st.w...@gmx.net > > Date: Sat, 8 Nov 2014 21:04:25 +0100 > > To: knowledgegal...@hotmail.com > > > >

RE: Issue with lyx PLEASE HELP

to my file. Then I go to documents and the "latex log" is grey. I'm not able to choose it. Is there another way I can send you it to you? Again, thank you for your patience. > Subject: Re: Issue with lyx PLEASE HELP > From: st.w...@gmx.net > Date: Sat, 8 Nov 2014 22:14:04 +0

Re: Issue with lyx PLEASE HELP

folder(s) with space(s) in the name and eliminate the spaces. Regards, Stephan > > Subject: Re: Issue with lyx PLEASE HELP > > From: st.w...@gmx.net > > Date: Sat, 8 Nov 2014 22:14:04 +0100 > > CC: lyx-users@lists.lyx.org > > To: knowledgegal...@hotmail.com > >

RE: Issue with lyx PLEASE HELP

name error The directory path to the document cannot contain spaces. 14:24:58.081: Error while exporting format: PDF (pdflatex) > Subject: Re: Issue with lyx PLEASE HELP > From: st.w...@gmx.net > Date: Sat, 8 Nov 2014 23:07:39 +0100

Re: Issue with lyx PLEASE HELP

On Sat, 8 Nov 2014 22:27:04 + V N wrote: > I'm not sure how to activate debug messages for Latex production. But > I have deleted all of the spaces in the folder names of the location > of my file and reopened and still have the following message in the > message

Re: Issue with lyx PLEASE HELP

On Sun, 9 Nov 2014 09:46:14 +1100 Charlie wrote: > I'm late coming into this but I wonder if you think you have deleted > the spaces or have in actual fact. If you copy and past your document > into a text editor it might show up the space if you move your cursor >

Re: Issue with lyx PLEASE HELP

ou have given your account a name with a space? Perhaps you are using "V N" for your account? That's also part of the directory path… Stephan > > Subject: Re: Issue with lyx PLEASE HELP > > From: st.w...@gmx.net > > Date: Sat, 8 Nov 2014 23:07:39 +0100 > > CC: lyx-

Issue with lyx PLEASE HELP

although I have read some forums where people had the issue I still need some step by step advice. Can you please HELP?! I need to make pdf's ASAP. Thank you for your time.

Re: Issue with lyx PLEASE HELP

contain spaces. Does the name of your directory path contain a space? e.g. my directory? Try myDirectory. Wolfgang I am not a tech guy so although I have read some forums where people had the issue I still need some step by step advice. Can you please HELP?! I need to make pdf's ASAP. Thank

Issue with lyx PLEASE HELP

although I have read some forums where people had the issue I still need some step by step advice. Can you please HELP?! I need to make pdf's ASAP. Thank you for your time.

Re: Issue with lyx PLEASE HELP

contain spaces. Does the name of your directory path contain a space? e.g. my directory? Try myDirectory. Wolfgang I am not a tech guy so although I have read some forums where people had the issue I still need some step by step advice. Can you please HELP?! I need to make pdf's ASAP. Thank

Issue with lyx PLEASE HELP

although I have read some forums where people had the issue I still need some step by step advice. Can you please HELP?! I need to make pdf's ASAP. Thank you for your time.

Re: Issue with lyx PLEASE HELP

contain spaces. Does the name of your directory path contain a space? e.g. my directory? Try myDirectory. Wolfgang I am not a tech guy so although I have read some forums where people had the issue I still need some step by step advice. Can you please HELP?! I need to make pdf's ASAP. Thank

error in Lyx i do not understand please help

when i try to view lyx as pdf this problem pops on the screen and since i do not understand i cant fix. i have Nitro pro 8 as my pdf viewer. thank you This is pdfTeX, Version 3.1415926-2.4-1.40.13 (MiKTeX 2.9) (preloaded format=pdflatex 2013.2.19) 5 DEC 2013 20:19 entering extended mode

Re: error in Lyx i do not understand please help

On 2013-12-05, Noura Deeb wrote: when i try to view lyx as pdf this problem pops on the screen and since i do not understand i cant fix. i have Nitro pro 8 as my pdf viewer. There is a missing support package: ! LaTeX Error: File `amstext.sty' not found. You should install the package

Re: error in Lyx i do not understand please help

Hi Noura, 2013/12/5 Noura Deeb noura.deeb...@gmail.com ! LaTeX Error: File `amstext.sty' not found. It seems that ams text.sty style file is missing in your Miktex installation. You should install the amsmath package of Miktex. -- Prof. Murat Yildizoglu Université Montesquieu Bordeaux IV

error in Lyx i do not understand please help

when i try to view lyx as pdf this problem pops on the screen and since i do not understand i cant fix. i have Nitro pro 8 as my pdf viewer. thank you This is pdfTeX, Version 3.1415926-2.4-1.40.13 (MiKTeX 2.9) (preloaded format=pdflatex 2013.2.19) 5 DEC 2013 20:19 entering extended mode

Re: error in Lyx i do not understand please help

On 2013-12-05, Noura Deeb wrote: when i try to view lyx as pdf this problem pops on the screen and since i do not understand i cant fix. i have Nitro pro 8 as my pdf viewer. There is a missing support package: ! LaTeX Error: File `amstext.sty' not found. You should install the package

Re: error in Lyx i do not understand please help

Hi Noura, 2013/12/5 Noura Deeb noura.deeb...@gmail.com ! LaTeX Error: File `amstext.sty' not found. It seems that ams text.sty style file is missing in your Miktex installation. You should install the amsmath package of Miktex. -- Prof. Murat Yildizoglu Université Montesquieu Bordeaux IV

error in Lyx i do not understand please help

when i try to view lyx as pdf this problem pops on the screen and since i do not understand i cant fix. i have Nitro pro 8 as my pdf viewer. thank you This is pdfTeX, Version 3.1415926-2.4-1.40.13 (MiKTeX 2.9) (preloaded format=pdflatex 2013.2.19) 5 DEC 2013 20:19 entering extended mode

Re: error in Lyx i do not understand please help

On 2013-12-05, Noura Deeb wrote: > when i try to view lyx as pdf this problem pops on the screen and since i > do not understand i cant fix. i have Nitro pro 8 as my pdf viewer. There is a missing support package: > ! LaTeX Error: File `amstext.sty' not found. You should install the package

Re: error in Lyx i do not understand please help

Hi Noura, 2013/12/5 Noura Deeb > ! LaTeX Error: File `amstext.sty' not found. It seems that ams text.sty style file is missing in your Miktex installation. You should install the amsmath package of Miktex. -- Prof. Murat Yildizoglu Université Montesquieu Bordeaux

Re: Please help!

Thank you, Les, yes, I have tried this. After doing so I get the message, that my e- mail-address is not an the list, it starts like thies: Hi! This is the ezmlm program. I'm managing the lyx-users@lists.lyx.org mailing list. I'm working for my owner, who can be reached at

Re: Please help!

Hi jezzifer, A couple of ideas: 1. did you subscribe with another email address that is being forwarded to your gmail address? 2. gmail allows you to receive email from jez.z.if...@gmail.com . Did you enter your address in a different way like this when you subscribed? To find out, search your

Re: Please help!

On 10/18/2012 08:06 AM, Scott Kostyshak wrote: Hi jezzifer, A couple of ideas: 1. did you subscribe with another email address that is being forwarded to your gmail address? 2. gmail allows you to receive email from jez.z.if...@gmail.com . Did you enter your address in a different way like

Re: Please help!

On 10/18/2012 04:30 AM, jezZiFeR iMap wrote: Thank you, Les, yes, I have tried this. After doing so I get the message, that my e-mail-address is not an the list, it starts like thies: Do you perhaps have another e-mail address, or alias, that might be subscribed to the list? I always have to

Re: Please help!

Dear Scott, Thank you for your ideas. 1. I have thought of this, but there is just shown this address here in the complete header. There also is an e-mail-address, in which one could enter another address than the one you write from, to unsubscribe the entered address. It might really be,

Re: Please help!

On Thu, 18 Oct 2012 23:03:35 +0200 jezZiFeR iMap jezzi...@gmail.com wrote: 2. Maybe I subsribed with one of the following: jezzi...@gmail.com jezzi...@googlemail.com Unfortunately I don’t have the welcome message anymore… Have you tried unsubscribing using these two addresses? I don't use

Re: Please help!

Thank you, Les, yes, I have tried this. After doing so I get the message, that my e- mail-address is not an the list, it starts like thies: Hi! This is the ezmlm program. I'm managing the lyx-users@lists.lyx.org mailing list. I'm working for my owner, who can be reached at

Re: Please help!

Hi jezzifer, A couple of ideas: 1. did you subscribe with another email address that is being forwarded to your gmail address? 2. gmail allows you to receive email from jez.z.if...@gmail.com . Did you enter your address in a different way like this when you subscribed? To find out, search your

Re: Please help!

On 10/18/2012 08:06 AM, Scott Kostyshak wrote: Hi jezzifer, A couple of ideas: 1. did you subscribe with another email address that is being forwarded to your gmail address? 2. gmail allows you to receive email from jez.z.if...@gmail.com . Did you enter your address in a different way like

Re: Please help!

On 10/18/2012 04:30 AM, jezZiFeR iMap wrote: Thank you, Les, yes, I have tried this. After doing so I get the message, that my e-mail-address is not an the list, it starts like thies: Do you perhaps have another e-mail address, or alias, that might be subscribed to the list? I always have to

Re: Please help!

Dear Scott, Thank you for your ideas. 1. I have thought of this, but there is just shown this address here in the complete header. There also is an e-mail-address, in which one could enter another address than the one you write from, to unsubscribe the entered address. It might really be,

Re: Please help!

On Thu, 18 Oct 2012 23:03:35 +0200 jezZiFeR iMap jezzi...@gmail.com wrote: 2. Maybe I subsribed with one of the following: jezzi...@gmail.com jezzi...@googlemail.com Unfortunately I don’t have the welcome message anymore… Have you tried unsubscribing using these two addresses? I don't use

Re: Please help!

Thank you, Les, yes, I have tried this. After doing so I get the message, that my e- mail-address is not an the list, it starts like thies: Hi! This is the ezmlm program. I'm managing the lyx-users@lists.lyx.org mailing list. I'm working for my owner, who can be reached at

Re: Please help!

Hi jezzifer, A couple of ideas: 1. did you subscribe with another email address that is being forwarded to your gmail address? 2. gmail allows you to receive email from jez.z.if...@gmail.com . Did you enter your address in a different way like this when you subscribed? To find out, search your

Re: Please help!

On 10/18/2012 08:06 AM, Scott Kostyshak wrote: Hi jezzifer, A couple of ideas: 1. did you subscribe with another email address that is being forwarded to your gmail address? 2. gmail allows you to receive email from jez.z.if...@gmail.com . Did you enter your address in a different way like

Re: Please help!

On 10/18/2012 04:30 AM, jezZiFeR iMap wrote: Thank you, Les, yes, I have tried this. After doing so I get the message, that my e-mail-address is not an the list, it starts like thies: Do you perhaps have another e-mail address, or alias, that might be subscribed to the list? I always have to

Re: Please help!

Dear Scott, Thank you for your ideas. 1. I have thought of this, but there is just shown this address here in the complete header. There also is an e-mail-address, in which one could enter another address than the one you write from, to unsubscribe the entered address. It might really be,

Re: Please help!

On Thu, 18 Oct 2012 23:03:35 +0200 jezZiFeR iMap wrote: > 2. > Maybe I subsribed with one of the following: > jezzi...@gmail.com > jezzi...@googlemail.com > > Unfortunately I don’t have the welcome message anymore… Have you tried unsubscribing using these two addresses? I

Please help!

again, but in the moment I want to get off. Please please help. Thanks!

Re: Please help!

to be on the list one day again, but in the moment I want to get off. Please please help. Thanks! If you don't say exactly what you tried, it's hard to help you. A.

Please help!

again, but in the moment I want to get off. Please please help. Thanks!

Re: Please help!

to be on the list one day again, but in the moment I want to get off. Please please help. Thanks! If you don't say exactly what you tried, it's hard to help you. A.

Please help!

again, but in the moment I want to get off. Please please help. Thanks!

Re: Please help!

to be on the list one day again, but in the moment I want to get off. Please please help. Thanks! If you don't say exactly what you tried, it's hard to help you. A.

Could somebody please help? I do have problems with format biblatex-dw and idembib/idembibformat…

I hope, that this post is formally correct, and my english is understandable. Please let me know if something is not clear, or if I said something, that is not correct. If I could maybe get help elsewhere, please let me know, as I have to solve that problem to be able to continue my work.

Re: Could somebody please help? I do have problems with format biblatex-dw and idembib/idembibformat…

I think is better if you address that question to the person in charge of the maintenance of the package, Dominik Waßenhoven: http://biblatex.dominik-wassenhoven.de/faq.shtml?en http://biblatex.dominik-wassenhoven.de/faq.shtml?enRegards. - Julio

Could somebody please help? I do have problems with format biblatex-dw and idembib/idembibformat…

I hope, that this post is formally correct, and my english is understandable. Please let me know if something is not clear, or if I said something, that is not correct. If I could maybe get help elsewhere, please let me know, as I have to solve that problem to be able to continue my work.

Re: Could somebody please help? I do have problems with format biblatex-dw and idembib/idembibformat…

I think is better if you address that question to the person in charge of the maintenance of the package, Dominik Waßenhoven: http://biblatex.dominik-wassenhoven.de/faq.shtml?en http://biblatex.dominik-wassenhoven.de/faq.shtml?enRegards. - Julio

Could somebody please help? I do have problems with format biblatex-dw and idembib/idembibformat…

I hope, that this post is formally correct, and my english is understandable. Please let me know if something is not clear, or if I said something, that is not correct. If I could maybe get help elsewhere, please let me know, as I have to solve that problem to be able to continue my work.

Re: Could somebody please help? I do have problems with format biblatex-dw and idembib/idembibformat…

I think is better if you address that question to the person in charge of the maintenance of the package, Dominik Waßenhoven: http://biblatex.dominik-wassenhoven.de/faq.shtml?en Regards. - Julio

APA style manuscript? Please help format!

I'm trying to format an article class document for submission as an assignment which requires a running header, 1 inch margins, double spaces, etc... under APA format. Headings style is set to default, should I change it? I'd like to have a short title at the top middle, and my name at one

Re: APA style manuscript? Please help format! (follow up)

, Aaron Hall aaronch...@yahoo.com wrote: From: Aaron Hall aaronch...@yahoo.com Subject: APA style manuscript? Please help format! To: lyx-users@lists.lyx.org lyx-users@lists.lyx.org Date: Wednesday, June 16, 2010, 4:57 AM I'm trying to format an article class document for submission as an assignment

Re: APA style manuscript? Please help format! (follow up)

style manuscript? Please help format! (follow up) Oops, I trailed off on a question near the end, it was: Also, I need to insert diagrams that look like this:http://en.wikipedia.org/wiki/File:Porter_Value_Chain.png My options: Latex and I forgot to add the GiMP, MAYBE scribus, or just using

Re: APA style manuscript? Please help format! (follow up)

don't know how. For my issue 5) I think I'm going to use OpenOffice Draw. Should I export to or save as JPG or PNG or something else? Aaron --- On Wed, 6/16/10, curtis osterhoudt flutz...@yahoo.com wrote: From: curtis osterhoudt flutz...@yahoo.com Subject: Re: APA style manuscript? Please help

APA style manuscript? Please help format!

I'm trying to format an article class document for submission as an assignment which requires a running header, 1 inch margins, double spaces, etc... under APA format. Headings style is set to default, should I change it? I'd like to have a short title at the top middle, and my name at one

Re: APA style manuscript? Please help format! (follow up)

, Aaron Hall aaronch...@yahoo.com wrote: From: Aaron Hall aaronch...@yahoo.com Subject: APA style manuscript? Please help format! To: lyx-users@lists.lyx.org lyx-users@lists.lyx.org Date: Wednesday, June 16, 2010, 4:57 AM I'm trying to format an article class document for submission as an assignment

Re: APA style manuscript? Please help format! (follow up)

style manuscript? Please help format! (follow up) Oops, I trailed off on a question near the end, it was: Also, I need to insert diagrams that look like this:http://en.wikipedia.org/wiki/File:Porter_Value_Chain.png My options: Latex and I forgot to add the GiMP, MAYBE scribus, or just using

Re: APA style manuscript? Please help format! (follow up)

don't know how. For my issue 5) I think I'm going to use OpenOffice Draw. Should I export to or save as JPG or PNG or something else? Aaron --- On Wed, 6/16/10, curtis osterhoudt flutz...@yahoo.com wrote: From: curtis osterhoudt flutz...@yahoo.com Subject: Re: APA style manuscript? Please help

APA style manuscript? Please help format!

I'm trying to format an article class document for submission as an assignment which requires a running header, 1 inch margins, double spaces, etc... under APA format. Headings style is set to default, should I change it? I'd like to have a short title at the top middle, and my name at one

Re: APA style manuscript? Please help format! (follow up)

d, 6/16/10, Aaron Hall <aaronch...@yahoo.com> wrote: From: Aaron Hall <aaronch...@yahoo.com> Subject: APA style manuscript? Please help format! To: "lyx-users@lists.lyx.org" <lyx-users@lists.lyx.org> Date: Wednesday, June 16, 2010, 4:57 AM I'm trying to format an

Re: APA style manuscript? Please help format! (follow up)

ne 16, 2010 10:18:35 AM Subject: Re: APA style manuscript? Please help format! (follow up) Oops, I trailed off on a question near the end, it was: "Also, I need to insert diagrams that look like this:http://en.wikipedia.org/wiki/File:Porter_Value_Chain.png My options: Latex" an

Re: APA style manuscript? Please help format! (follow up)

z...@yahoo.com> Subject: Re: APA style manuscript? Please help format! (follow up) To: "Aaron Hall" <aaronch...@yahoo.com>, "lyx-users@lists.lyx.org" <lyx-users@lists.lyx.org> Date: Wednesday, June 16, 2010, 1:23 PM   You might try inkscape (www.inkscape.org) for th

LOF LOT Customization - Someone Please help

Hi Guys, it makes a long time since I don't post any question bothering you guys. The thing is, I need to delivery something to my college and as I have a short period of time to do this I was wondering if some one already faced this issue. Actually is a simple question but I'm not sure how to

Re: LOF LOT Customization - Someone Please help

Marcelo Boss schrieb: I want it for tables and figures. I believe just a simple \renewcommand would solve my problem. You have 3 possibilities: http://www.tex.ac.uk/cgi-bin/texfaq2html?label=tocloft In case you are not alreas a memoir or koma-script document class for your document, I

Res: LOF LOT Customization - Someone Please help

Customization - Someone Please help Marcelo Boss schrieb: I want it for tables and figures. I believe just a simple \renewcommand would solve my problem. You have 3 possibilities: http://www.tex.ac.uk/cgi-bin/texfaq2html?label=tocloft In case you are not alreas a memoir or koma-script document class

LOF LOT Customization - Someone Please help

Hi Guys, it makes a long time since I don't post any question bothering you guys. The thing is, I need to delivery something to my college and as I have a short period of time to do this I was wondering if some one already faced this issue. Actually is a simple question but I'm not sure how to

Re: LOF LOT Customization - Someone Please help

Marcelo Boss schrieb: I want it for tables and figures. I believe just a simple \renewcommand would solve my problem. You have 3 possibilities: http://www.tex.ac.uk/cgi-bin/texfaq2html?label=tocloft In case you are not alreas a memoir or koma-script document class for your document, I

Res: LOF LOT Customization - Someone Please help

Customization - Someone Please help Marcelo Boss schrieb: I want it for tables and figures. I believe just a simple \renewcommand would solve my problem. You have 3 possibilities: http://www.tex.ac.uk/cgi-bin/texfaq2html?label=tocloft In case you are not alreas a memoir or koma-script document class

LOF LOT Customization - Someone Please help

Hi Guys, it makes a long time since I don't post any question bothering you guys. The thing is, I need to delivery something to my college and as I have a short period of time to do this I was wondering if some one already faced this issue. Actually is a simple question but I'm not sure how to

Re: LOF LOT Customization - Someone Please help

Marcelo Boss schrieb: I want it for tables and figures. I believe just a simple \renewcommand would solve my problem. You have 3 possibilities: http://www.tex.ac.uk/cgi-bin/texfaq2html?label=tocloft In case you are not alreas a memoir or koma-script document class for your document, I

Res: LOF LOT Customization - Someone Please help

sunto: Re: LOF LOT Customization - Someone Please help Marcelo Boss schrieb: > I want it for tables and figures. > I believe just a simple \renewcommand would solve my problem. You have 3 possibilities: http://www.tex.ac.uk/cgi-bin/texfaq2html?label=tocloft In case you are not alreas a memoir

Re: Bibliography please help

Do you know another application that could help us to build the Styles? I never tried, but I can guess building styles with BibLaTeX would be not so difficoult, and it can do almost everything you can ask to other BibTeX packages. In addition, you can try modify existing BibLateX styles,

  1   2   3   4   >