On Wed, 2009-10-21 at 02:27 +0200, ext tz wrote:
It actually boots up partially - the screen with the battery animation
is running in something from /etc/init.d.
It's called act dead mode and it's a different init run-level (maybe
5?), so if you make /etc/rc5.d to point to the normal run-level
Hi,
I have my N810 booting straight into a desktop when I boot with the
charger in. Changing the runlevel number seemed like the way to go but
didn't work for one reason: mce checked to see if it was booted with
the charger in; if so, then display the charger screen. This meant
that it booted
Kimmo Hämäläinen wrote:
It's called act dead mode and it's a different init run-level (maybe
5?), so if you make /etc/rc5.d to point to the normal run-level
(/etc/rc2.d or 3?), it will boot normally.
No, this will not solve it completely. The /proc/bootreason is probably
checked in some
To automatically optify a package with the autobuilder, should I make it
Build-Depends from a specific package or is maemo-optify always available in
the build environment?
Thanks,
Luca Donaggio
___
maemo-developers mailing list
On Wed, Oct 21, 2009 at 12:36, Luca Donaggio donag...@gmail.com wrote:
To automatically optify a package with the autobuilder, should I make it
Build-Depends from a specific package or is maemo-optify always available in
the build environment?
You need to `Build-Depends: maemo-optify', AIUI.
Thanks Andrew!
Luca Donaggio
On Wed, Oct 21, 2009 at 1:40 PM, Andrew Flegg and...@bleb.org wrote:
On Wed, Oct 21, 2009 at 12:36, Luca Donaggio donag...@gmail.com wrote:
To automatically optify a package with the autobuilder, should I make it
Build-Depends from a specific package or is
Hi,
Nathan Anderson wrote:
What physical hardware buttons do exist? Maybe we can tie onto one
of those to exit out of full screen mode in apps.Anybody know the
keyboard constants are to these hardware buttons -- we should put them in a
wiki article -- this is something that I could think
Cornelius Hald wrote:
Hi,
Nathan Anderson wrote:
What physical hardware buttons do exist? Maybe we can tie onto one
of those to exit out of full screen mode in apps.Anybody know the
keyboard constants are to these hardware buttons -- we should put them in a
wiki article -- this is
Hi,
ext Graham Cobb wrote:
On Thursday 10 September 2009 12:16:59 Marius Vollmer wrote:
By the way, I have been experimenting with maemo-optify. I think it is
currently generating too many links for quite small files.
All files, even symlinks, take some space. On UBIFS single file
overhead
2009/10/21 Tuomas Kulve tuo...@kulve.fi:
Cornelius Hald wrote:
Hi,
Nathan Anderson wrote:
What physical hardware buttons do exist? Maybe we can tie onto one
of those to exit out of full screen mode in apps. Anybody know the
keyboard constants are to these hardware buttons -- we should
Hi,
While implementing a new notification feature for the community QA queue,
a number of mails have been sent out to owners of packages in
extras-testing.
Due to some incorrect checks more people have received the mail than was
intended.
I'm very sorry for sending you these mails. This should
Hi,
ext ds wrote:
Am Dienstag, den 20.10.2009, 20:08 +0200 schrieb Cornelius Hald:
On Tue, 2009-10-20 at 15:01 +0200, ds wrote:
I have no feeling for N900 at the moment. But yes, I have some feature
requests left on garage, and as there is not too much UI it should not
be a big deal:-)
Hi Niels,
On Wed, Oct 21, 2009 at 8:21 AM, Niels Breet ni...@maemo.org wrote:
Hi,
While implementing a new notification feature for the community QA queue,
a number of mails have been sent out to owners of packages in
extras-testing.
I received a couple of these e-mails (although all of
On Wed, Oct 21, 2009 at 2:05 PM, Cornelius Hald h...@icandy.de wrote:
Hi,
Nathan Anderson wrote:
What physical hardware buttons do exist? Maybe we can tie onto one
of those to exit out of full screen mode in apps. Anybody know the
keyboard constants are to these hardware buttons -- we
pHilipp Zabel wrote:
I think the camera button works differently, don´t know how, but the
load applet is using it for taking a screenshot.
This is interesting. I wonder if it would be a good idea to repurpose
this button to scan a barcode from some applications (say, shopping
list or media
To quote
http://wiki.maemo.org/Qt4Hildon
QQQ
Hardcoded Keys:
In the QMainWindow:
- F6 - Toggle fullscreen the application
- F4 - Shows/Hides the application context menu
- Zoom in - is a standard key sequence QKeySequence::ZoomIn
- Zoom out - is a standard key sequence
Cornelius Hald wrote:
I don´t think there is already a widely used keyboard shortcut.
The full screen toggling should be done with the touch screen, yes.
However, there are some shortcuts in the keyboard (of which I found
by accident):
CTRL-Backspace = Open the task switcher (can be
Hello!
As mentioned in https://bugs.maemo.org/show_bug.cgi?id=5629, I cannot
get MP3 files to play with GStreamer on the N900 using the playbin
element. I have tested it with both Python code and the gst-launch utility.
$ gst-launch playbin uri=file:///path/to/a/mp3file.mp3
The error I am
Worth nothing that it is actually hildon-desktop itself that defines
these shortcuts...
Best Regards,
Faheem
On Wed, Oct 21, 2009 at 2:50 PM, Henrik Hedberg
henrik.hedb...@innologies.fi wrote:
Cornelius Hald wrote:
I don´t think there is already a widely used keyboard shortcut.
The
El mié, 21-10-2009 a las 16:17 +0200, Thomas Perl escribió:
Hello!
As mentioned in https://bugs.maemo.org/show_bug.cgi?id=5629, I cannot
get MP3 files to play with GStreamer on the N900 using the playbin
element. I have tested it with both Python code and the gst-launch utility.
$
Thomas Perl wrote:
Hello!
As mentioned in https://bugs.maemo.org/show_bug.cgi?id=5629, I cannot
get MP3 files to play with GStreamer on the N900 using the playbin
element. I have tested it with both Python code and the gst-launch utility.
I've used playbin2 with gst-launch on the command
2009/10/21 Claudio Saavedra csaave...@igalia.com:
El mié, 21-10-2009 a las 16:17 +0200, Thomas Perl escribió:
As mentioned in https://bugs.maemo.org/show_bug.cgi?id=5629, I cannot
get MP3 files to play with GStreamer on the N900 using the playbin
element. I have tested it with both Python code
Ctrl-f is very commonly used as Find. Users are used to that. But what
about something like Ctrl-Volume (up/down) key? Or Ctrl-Camera Key. That
way you aren't actually taking overriding a existing used key. And it
could be used by pretty much any program that needed it w/o it being used
If there's neither hardware button to toggle fullscreen mode nor a default
keyboard shortcut and the preferred method is via the touchscreen then a
specific widget should be included in hildon, just to avoid duplicating the
same code or, even worse, 'reinventing the wheel' for every app.
Maybe
I think that any combination of CTRL+hardware button of your choice would
be a little awkward (CTRL is in the slideing keybord, other buttons are on
the sides of the device).
I would prefer an all-with-the-keyboard combination.
Luca Donaggio
On Wed, Oct 21, 2009 at 4:53 PM, Nathan Anderson
I uploaded glom 1.12.2-0maemo2 to extras-devel yesterday evening, which
built fine. However, looking at:
http://maemo.org/packages/package_instance/view/fremantle_extras-devel_free_armel/glom/1.12.2-0maemo2/
I see that an old version 1.12.2-0maemo1 is in the File field. There is
also a
Devs,
Ok, I have been trying to be a good boy and optify all the items I
have been putting into the fremantle extras. Up to now they have been
standalone libraries and the build bots have done their job and optified the
package (and then I've been able to install them in my sdk
On Wed, 2009-10-21 at 17:13 +0200, ext Luca Donaggio wrote:
If there's neither hardware button to toggle fullscreen mode nor a
default keyboard shortcut and the preferred method is via the
touchscreen then a specific widget should be included in hildon, just
to avoid duplicating the same code
Luca,
You would already have to have the keyboard open if you used Ctrl-S or
Ctrl-Shift-F, Ctrl-F could be used for Find. Ctrl-S could be Save. Using
Ctrl-key is hazardous since different apps have different requirements.
My guesses for universal keys that all apps could accept for
Welcome to the club :) I have the same problem.
Regards:
Bundyo
On Wed, Oct 21, 2009 at 6:30 PM, Nathan Anderson
nat...@andersonsplace.netwrote:
Devs,
Ok, I have been trying to be a good boy and optify all the items I
have been putting into the fremantle extras. Up to now they have
What about pressing + and - at the same time? At least if I remember
correctly the N800 was able to signalize this. If + and - are beside
each other on N900 this might be comparable to the place where N800 had
the button (between + and -)
Detlef
Am Mittwoch, den 21.10.2009,
Nathan Anderson wrote:
Try to install static depends: libcurl3 libcurl3-dev libicu42 libicu42-dev
clucene-core clucene-core-dev zlib1g-dev python2.5 python2.5-dev
[2009-10-21 12:30:46] fakeroot apt-get -y -q -o
APT::Get::AllowUnauthenticated=1 install --no-remove libcurl3 libcurl3-dev
Hi,
playbin2 works. playbin used to work too before having installed
ogg-support, at least on a older firmware release (OS 38-x) it worked
well until I installed ogg-support.
The SDK documentation mentions to use playbin2, however, so breaking
playbin shouldn't be too critical. But some gstreamer
On 10/21/09, Nathan Anderson nat...@andersonsplace.net wrote:
Luca,
You would already have to have the keyboard open if you used Ctrl-S or
Ctrl-Shift-F, Ctrl-F could be used for Find. Ctrl-S could be Save. Using
Ctrl-key is hazardous since different apps have different
requirements.
Julius,
Thanks -- I thought I saw something on the list about it a couple
days ago -- but I was thinking it was relating to something else.
Well, I guess it is good to know that it isn't just my problem. But I
know this basically halts what I'm doing.
I've added it as a bug to the
Hi,
At the summit, and according to the documentation[1], an EContact should have
its *persistent* UID stored if you need to refer to a contact at a later date.
However, how does this work with merging contacts? If I merge a contact (UID=1)
with another (UID=2), are stored references to both
2009/10/21 Andrew Flegg and...@bleb.org:
Hi,
At the summit, and according to the documentation[1], an EContact should have
its *persistent* UID stored if you need to refer to a contact at a later date.
However, how does this work with merging contacts? If I merge a contact
(UID=1) with
2009/10/21 Nathan Anderson nat...@andersonsplace.net:
...
Selecting previously deselected package clucene-core.
Unpacking clucene-core (from .../clucene-core_0.9.21b-0maemo1_armel.deb) ...
dpkg: error processing
/var/cache/apt/archives/clucene-core_0.9.21b-0maemo1_armel.deb (--unpack):
Ed,
I have actually installed all the packages I have built and
submitted to extras _inside_ my scratchbox from extras(-devel/testing)
without any issues; in fact I needed install a dozen or so packages (some
mine, some not) to make up all the dependancies on the one I was actually
having
2009/10/21 Nathan Anderson nat...@andersonsplace.net:
Ed,
I have actually installed all the packages I have built and
submitted to extras _inside_ my scratchbox from extras(-devel/testing)
Good. In this case we just need to understand what's the difference between
your environment and
Ed,
Sure can (and following the chain).
ls -l / | grep opt
lrwxrwxrwx1 root root 18 Oct 6 22:36 opt -
/targets/links/opt
ls -l /targets/links/ | grep opt
lrwxrwxrwx 1 maemo 1000 26 Oct 19 16:55 opt -
/targets/FREMANTLE_X86/opt
ls -l
2009/10/21 Nathan Anderson nat...@andersonsplace.net:
Ed,
Sure can (and following the chain).
ls -l / | grep opt
lrwxrwxrwx1 root root 18 Oct 6 22:36 opt -
/targets/links/opt
ls -l /targets/links/ | grep opt
lrwxrwxrwx 1 maemo 1000 26 Oct 19 16:55 opt -
2009/10/21 Nathan Anderson nat...@andersonsplace.net:
Ed,
Sure can (and following the chain).
ls -l / | grep opt
lrwxrwxrwx1 root root 18 Oct 6 22:36 opt -
/targets/links/opt
ls -l /targets/links/ | grep opt
lrwxrwxrwx 1 maemo 1000 26 Oct 19 16:55 opt -
Ed,
Here is my output. Looking through the list I do not appear to he
-cputransp and -maemo3
ii scratchbox-core 1.0.16
Scratchbox base system
ii scratchbox-devkit-apt-https 1.0.10
APT HTTPS devkit for Scratchbox
ii
Ed,
Just tried on the armel target.
[sbox-FREMANTLE_ARMEL: ~] apt-get install clucene-core clucene-core-dev
Reading package lists... Done
Building dependency tree... Done
The following NEW packages will be installed:
clucene-core clucene-core-dev
0 upgraded, 2 newly installed, 0 to
Aniello Del Sorbo ha scritto:
I suppose that when you merge two contacts, one gets deleted and its
fields added to the other one.
I don't know how you do merge the contacts, but if you merge contact
UID 1 into contact UID 2, then, logically, UID 1 would be deleted,
wouldn't it?
Judging by
Hi,
in my opinion, maemo-optify shouldn't be hailed as the
good-for-everyone savior to the rootfs space issue. I see it as a
workaround for software that cannot be easily relocated to /opt.
Optification symlinks take space on the rootfs too, so if you have a
lot of them, you still waste several
On Wed, Oct 21, 2009 at 21:43, Martin Grimme martin.gri...@gmail.com wrote:
in my opinion, maemo-optify shouldn't be hailed as the
good-for-everyone savior to the rootfs space issue. I see it as a
workaround for software that cannot be easily relocated to /opt.
Agreed. Software which is
Hmm, yes, that seems to be the problem. In the final SDK /opt is a symlink
but in the latest beta SDK it is not. I didn't upgrade my development
machine, but I have the final on another so I can compare. I'll report back
if successful.
Regards:
Bundyo
On Thu, Oct 22, 2009 at 12:03 AM, Ed Bartosh
Ed,
I believe this is what you are asking:
FREMANTLE_ARMEL cs2007q3-glibc2.5-arm7
FREMANTLE_X86cs2007q3-glibc2.5-i486
Nathan
-Original Message-
From: Ed Bartosh [mailto:bart...@gmail.com]
Sent: Wednesday, October 21, 2009 4:03 PM
To: Nathan Anderson
Cc:
Looks like the only difference here is that my /opt should be pointing to
/targets/links/opt which is symlinked to the proper target on target change.
Uploading the new package to extras now.
Regards:
Bundyo
On Thu, Oct 22, 2009 at 12:39 AM, Nathan Anderson nat...@andersonsplace.net
wrote:
2009/10/21 Martin Grimme martin.gri...@gmail.com:
Please don't get me wrong. optify is still useful and good to have,
but everybody should bear in mind that it's only a workaround, and
that relocating the software to /opt would be a much safer and more
elegant solution.
It would be helpful if
Nah, that's not enough. Still fails.
Another difference is that I'm building my optified package in scratchbox
before upload and the other people are using the autobuilder, so the problem
should be somewhere else.
Regards:
Bundyo
On Thu, Oct 22, 2009 at 2:09 AM, Kamen Bundev bun...@gmail.com
First post here, so greetings, etc. :)
As some of you may know, I'm currently developing a wallpaper management
application (python) that ties into n900wallpapers.com. However, the big
roadblock I've come up across so far is actually changing the user's desktop
background.
The only information I
Kamen,
I build both binary target and source targets debs in my scratchbox
before I upload.For instance last night I had to rebuild the binary debs
about 20 times (trying to get a weird make file rule to work). Once I got
it working then I would copy my rules to a fresh copy and re-run
55 matches
Mail list logo
