.
Peter Shute
--
Mailman-Users mailing list Mailman-Users@python.org
https://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://wiki.list.org/x/AgA3
Security Policy: http://wiki.list.org/x/QIA9
Searchable Archives: http://www.mail
with
only 1000 members and low traffic, assuming we warn the yahoo members to use a
different address?
Peter Shute
Siniša Burina wrote:
I believe there's no need to elaborate on the problems recently introduced by
Yahoo, changing their
DMARC DNS record and rendering many mailman lists unusable
Could someone please tell me which manual this scrub_nondigest option is
described in? I didn't know mailman could do this.
Sent from my iPad
On 27 Mar 2014, at 5:33 am, Mark Sapiro m...@msapiro.net wrote:
Sylvain Viart wrote:
My question is:
Is there any handler that I can setup in
after MIME attachments have been stripped.
(Edit
convert_html_to_plaintext)http://lists.wcasa-blog.org/admin.cgi/regional_ta_sc-wcasa-blog.org/?VARHELP=contentfilter/convert_html_to_plaintext
No Yes
Wondering if anyone has any solutions.
Thanks.
Peter
Sent from my iPad
that they are not on the list under any other email
address. How could this possibly happen?
Thanks anyone for your help.
Peter
Peter Fiala
Technology Events Coordinator
Wisconsin Coalition Against Sexual Assault (WCASA)
2801 W. Beltline Hwy., Ste 202, Madison, WI 53713
Telephone: 608-257-1516; Direct: 608-284-5494
allow me to save its own password, so a couple of taps get
me back into the page.
Peter Shute
Sent from my iPad
On 6 Feb 2014, at 1:00 pm, Peter Shute psh...@nuw.org.au wrote:
On 6 Feb 2014, at 11:03 am, Mark Sapiro m...@msapiro.net wrote:
I use Firefox on an Android phone and it quite happily
When this happens to us, we normally either ask the sender to send it again, or
we forward the copy in the moderator alert email ourselves.
Peter Shute
-Original Message-
From: Mailman-Users
[mailto:mailman-users-bounces+pshute=nuw.org...@python.org]
On Behalf Of Mark Sapiro
Messages held for moderation are listed in sender order rather than
chronological order. Can that be changed?
Peter Shute
Sent from my iPad
--
Mailman-Users mailing list Mailman-Users@python.org
https://mail.python.org/mailman/listinfo/mailman
Mark Sapiro wrote:
On 02/24/2014 10:20 AM, Peter Shute wrote:
Messages held for moderation are listed in sender order
rather than chronological order. Can that be changed?
Beginning in Mailman 2.1.16, there is a
DISPLAY_HELD_SUMMARY_SORT_BUTTONS setting.
The documentation
.
[*] if the host is really cooperative, they could install the
changes at
http://bazaar.launchpad.net/~mailman-coders/mailman/2.1/revis
ion/1401
and
http://bazaar.launchpad.net/~mailman-coders/mailman/2.1/revis
ion/1406
to implement the feature in 2.1.15.
Thanks, I'll make inquiries.
Peter Shute
On 14/02/14 17:08, Mark Sapiro wrote:
On 02/14/2014 05:00 AM, Peter Flynn wrote:
Does MailMan support LDAP auth for the identities of list owners,
editors, and managers (excuse my ignorance of MailMan terminology) but
NOT for list members (subscribers).
No.
So if LDAP is implemented
).
In other words, most of our lists are open to anyone to join, so members
must not be restricted to in-house people; but lists can only be owned
and run by an employee of the organisation (someone who appears in our
identity management system).
///Peter
--
Peter Flynn | Electronic Publishing Unit
they become moderated again when they
resubscribe.
Does mailman keep a record of this stuff?
Peter Shute
--
Mailman-Users mailing list Mailman-Users@python.org
https://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://wiki.list.org
delivery when they go on holidays, so
they become moderated again when they resubscribe.
Does mailman keep a record of this stuff?
Peter Shute
To my knowledge, mailman does not keep track of this. I have
the list software send me notices of messages held for
moderation and file them
On 6 Feb 2014, at 1:45 am, Mark Sapiro m...@msapiro.net wrote:
On 02/04/2014 11:30 PM, Peter Shute wrote:
Can anyone tell me why the moderator page won't let me save the password in
any of the iOS browser apps I've tried? None let me enter the URL and
password myself, I have to wait
On 6 Feb 2014, at 5:22 am, Peter Shute psh...@nuw.org.au wrote:
My experience with Firefox mostly on various Linux, Mac and Windows
platforms is that it does not always offer to save passwords,
particularly those from financial institution websites, but it does
always offer to save Mailman
VoIP PBX that only had a
password field without a user name. When a recent upgrade included a user
name field my problems went away.
That's likely to be the reason then, but it doesn't explain why my Firefox does
ask to save the password, without any plugins.
Peter Shute
a mailman password too.
I just tried the Mercury browser, on the grounds that its logo looks a bit like
the Firefox logo, and it too doesn't ask to save it. It must be dependent on an
iOS API.
Peter Shute
--
Mailman-Users mailing list Mailman
cookies anyway because
it stays logged in if I stay in Safari. I tried never, just in case, but no
improvement.
Peter Shute
--
Mailman-Users mailing list Mailman-Users@python.org
https://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ
visible.
As Mark said, this is an Apple problem, not a mailman problem. but if it has
become a permanent feature of iOS, and if lots of mailman administrators use
iOS, does it become a mailman problem?
Peter Shute
--
Mailman-Users mailing list
offer
for that web page.
Peter Shute
--
Mailman-Users mailing list Mailman-Users@python.org
https://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://wiki.list.org/x/AgA3
Security Policy: http://wiki.list.org/x/QIA9
Searchable
I use the moderator web page with Firefox, and it stays logged in for as long
as I keep the browser open. But with Safari on iPhone and iPad, I often have to
log in again when I return to it. Same for every other browser I've tried under
iOS. Can anyone tell me why?
Peter Shute
On 4 Feb 2014, at 12:26 pm, Mark Sapiro m...@msapiro.net wrote:
On 02/03/2014 05:04 PM, Peter Shute wrote:
I use the moderator web page with Firefox, and it stays logged in for as
long as I keep the browser open. But with Safari on iPhone and iPad, I often
have to log in again when I
On 4 Feb 2014, at 1:27 pm, Mark Sapiro m...@msapiro.net wrote:
On 02/03/2014 05:53 PM, Peter Shute wrote:
That makes sense. Is there any way around it? Is it possible to make it use
persistent cookies?
If you're willing to modify the code, see the MakeCookie function in
Mailman
Yes, it opens the App Store app (on my ipad), and then displays a blank white
square. I suspect this means the link is no longer valid.
Sent from my iPad
On 13 Jan 2014, at 9:45 pm, Mailman Admin mailman-ad...@uni-konstanz.de
wrote:
Hello Peter Shute
Am 2014-01-13 02:21, schrieb Peter
app,
still available.
All I really need is a simple web browser for my iPad that will either stay
logged into the moderator site, or can save the password. I've tried several,
but none will do either.
Peter Shute
Sent from my iPad
On 14 Jan 2014, at 2:31 am, Bruce Harrison
harri
I came across this thread about a moderating app written by Manuel Weiel:
http://www.mail-archive.com/mailman-users@python.org/msg60445.html
I can't find it in the App Store. Is it still available somehow?
Sent from my iPad
--
Mailman-Users
On 1/7/2014 at 22:51, Mark London m...@psfc.mit.edu wrote:
Hi - I want to hide our list of mailing lists from the public, but still
make the list viewable to administrators. Is this possible, i.e.
through an htaccess file, or perhaps some other method? Thanks.
You could run a cronjob that
it?
Peter Shute
Sent from my iPad
--
Mailman-Users mailing list Mailman-Users@python.org
https://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://wiki.list.org/x/AgA3
Security Policy: http://wiki.list.org/x/QIA9
Searchable Archives: http
to deal
with those?
Peter Shute
From: Mailman-Users [mailman-users-bounces+pshute=nuw.org...@python.org] On
Behalf Of Peter Shute [psh...@nuw.org.au]
Sent: Thursday, 9 January 2014 3:42 PM
To: mailman-users@python.org
Subject: [Mailman-Users] User's
to type on the iOS keyboard, so just logging in again isn't an
option. The browser doesn't offer to save the password like with some sites,
not sure why.
I've tried the Mailman Moderator app, but it doesn't let me read messages, or
see more than one item at a time.
Peter Shute
Sent from my
We do not delete student or staff accounts immediately but set them disabled
for about 6 month
before deleting the accounts. While an account if disabled its mail address is
no longer in the
mta's alias tables and so any mail from a mailman list the user is subscribed
to will bounce.
I want to
On 11/4/2013 at 13:19, Frank Murphy frankl...@gmail.com wrote:
On Mon, 04 Nov 2013 12:56:41 +0100
Peter Heitzer peter.heit...@rz.uni-regensburg.de wrote:
We do not delete student or staff accounts immediately but set them
disabled for about 6 month before deleting the accounts. While
On 11/4/2013 at 15:03, Mark Sapiro m...@msapiro.net wrote:
Peter Heitzer peter.heit...@rz.uni-regensburg.de wrote:
On 11/4/2013 at 13:19, Frank Murphy frankl...@gmail.com wrote:
Maybe set such users to nomail?
I think that is not sufficient as the member still can get password
reminder
Hello folks,
I have a few mailing lists which show a last_post_time of 1970-01-01. Does this
really mean that the list has not yet sent any mails to its subscribers, i.e the
list is inactive?
I assume that only a regular post from an allowed mail address forces an update
to a lists last_post_time
I would like to contract with someone to support approximately 500 MM clients.
-Peter Weyland
703-300-7980
--
Mailman-Users mailing list Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http
please contact
either Anne Knauer (anne.kna...@unoosa.org) or Juan Carlos Villagran de
Leon (juan-carlos.villag...@unoosa.org)
Best regards,
Peter Stumpf
Note: This is an automated response to your message [Mailman-Users]
suppress duplicate when posting addressed to list and its alias name
No I did not, thank you Adam
Peter
On 29/08/2012 16:01, Adam McGreggor wrote:
On Wed, Aug 29, 2012 at 07:04:47AM +0100, Peter D Sparkes wrote:
Hi
I am currently using exim4 on Linux Debian and intend to install Mailman.
Mailman Requirements::
* Collect email addresses
* Send out
to send newsletters/emails to list members.
From the documentation I can't see how to configure Mailman to meet these
requirements.
Help please
Peter
--
Mailman-Users mailing list Mailman-Users@python.org
http://mail.python.org/mailman/listinfo
AttributeError, name
AttributeError: data_version
Any ideas, while I research,
Thanks in Advance.
Peter
partsm...@weirdwater.org - Do not Use
--
Mailman-Users mailing list Mailman-Users@python.org
http://mail.python.org
Ok to add to this a dumpdb show that no config.pck has a data_version. In fact
some config.pck are missing for some lists.
Peter
-Original message-
My mailman migration is going ok except its failing at update
Mark thank you for your help, unfortunately as I investigate further there is
only one config.pck left an its corrupt. all the other lists have not
config.pck. Is there anyway to recover a list of members email addresses?
Peter
-Original message
Yep, thats what I was afraid you would say. unfortunately I am supposed to
perform a miracle, there is no back up.
Peter
-Original message-
From:Mark Sapiro m...@msapiro.net
Sent:Tue 08-28-2012 07:50 pm
Subject:Re: [Mailman
easier Any help would be greatly
appreciated.
Peter
partsm...@weirdwater.org - Do not Use
--
Mailman-Users mailing list Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman
Mark Sapiro schreef:
Peter wrote:
I did upgrade from Debian5 to 6 and running mailman version 2.1.13
I have postfix running with aliases in mysql.
I move the aliases tabel to the new server
To move the list to the new server did the next steps:
newlist ping, give the needed info, add
...@lists.example.com
ping-unsubscr...@example.com ping-unsubscr...@lists.example.com
Has this a relation with the no archiving at the moment?
peter
--
Mailman-Users mailing list Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman-users
Thanks Mark - exactly what I needed. Not quite sure on the $1.
This I could'nt make work.
Best regards
Peter
-Oprindelig meddelelse-
Fra: Mark Sapiro [mailto:m...@msapiro.net]
Sendt: 20. februar 2012 17:19
Til: Peter Sørensen
Cc
Once again - thanks for being so patient :-)
My fault . My script is written in Perl so need to change the $1 to $ARGV[0]
then
It worked.
Best regards
Peter
-Oprindelig meddelelse-
Fra: Mark Sapiro [mailto:m...@msapiro.net]
Sendt: 21. februar 2012 18:10
Til: Peter Sørensen
Cc
to rebuild completely but is it possible to
put this
In somwhere ??
Best regards
Peter Sørensen/Univ.Of.Southern Denmark/email: mas...@sdu.dk
--
Mailman-Users mailing list Mailman-Users@python.org
http://mail.python.org/mailman/listinfo
of this before and read the
logs more carefully. It's stated there 'R=local_user T=mail_spool'.
So the system works like a charm, only the guy administering it
doesn't
Thanks again!
Peter
__
http://twitter.com/UN_SPIDER
Peter Stumpf
From: Mark Sapiro
.
I restarted mailman, exim and even the complete machine. No effect.
I ran check_perms with the 'f' flag - it changed some permissions, but -
no effect.
I reinitiated the list using withlist - no effect.
I'm desperate. Where else could I dig into?
Peter
in the 'shunt' folder.
The file in the 'bad' is rather old and I know that the mailing list was
working at that time.
Peter
__
https://twitter.com/#!/UN_SPIDER
Peter Stumpf
-Stephen J. Turnbull step...@xemacs.org wrote: -
To: Peter STUMPF/VIENNA/UNO
to '8:00'.
The list does have an archive, which used to work fine - but none of the
messages I had sent since I'm experiencing the problems found its way to the
archive.
Thanks for your kind support!
__
https://twitter.com/#!/UN_SPIDER
Peter Stumpf
.
Thats it - so simple.
Sorry for all my confusion on this.
regards
Peter
Fra: Mark Sapiro [m...@msapiro.net]
Sendt: 29. december 2011 18:11
Til: Peter Sørensen
Cc: mailman-users@python.org
Emne: Re: SV: [Mailman-Users] when renaming a virtual domain
regards
Peter
Fra: Mark Sapiro [m...@msapiro.net]
Sendt: 27. december 2011 18:17
Til: Peter Sørensen
Cc: mailman-users@python.org
Emne: Re: [Mailman-Users] when renaming a virtual domain the listinfo command
can't show list
On 12/26/2011 10:07 PM, Peter
://mymailserver.sdu.dk/mailman/listinfo/somelist
What.s The problem ??
Regards
Peter
Med venlig hilsen
Peter Sørensen
Vid.medarb., IT-service
Tlf.6550 2858
Fax 6550 2860
Email mas...@sdu.dk
Web http://www.sdu.dk/ansat/maspsr
Adr.Campusvej 55, 5230 Odense M
SYDDANSK
find out where. It's not in the config file. Where to look ??
Best regards
Peter Sørensen/Univ. Of Southern Denmark/email: mas...@sdu.dk
--
Mailman-Users mailing list Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman-users
else.
This is not a big problem but before I dig into this and make a script I would
ask if this is already done.
I have the listnames in virtual-mailman and can get a list of members with the
script list_members.
Any hints ?
Best regards
Peter Sorensen/Univ.Of.South.Denmark/Email: mas
Peter
Fra: Mark Sapiro [m...@msapiro.net]
Sendt: 16. juni 2011 17:30
Til: Peter Sørensen
Cc: mailman-users@python.org
Emne: Re: [Mailman-Users] Question concerning list of members as
relay_recipients in postfix
On 6/15/2011 11:52 PM, Peter Sørensen
Hi,
I have some lists which all have advertised=1 but they don't show in
the web interface. What else could be missing ? Using mailman 2.1.14
best regards
Peter Sorensen/Univ. Of Southern Denmark/email: mas...@sdu.dk
--
Mailman-Users mailing
:43 /etc/aliases.db
From what I can see, the postfix should use the owner of the mail wrapper
script and get the corresponding group and
execute with that.
Can anyone help?
Regards
Peter Sorensen/Univ. Of Southern Denmark/email: mas...@sdu.dk
.
Thats it - thanks.
regards
Peter
Fra: Geoff Shang [ge...@quitelikely.com]
Sendt: 10. juni 2011 20:59
Til: Peter Sørensen
Cc: mailman-users@python.org
Emne: Re: [Mailman-Users] Group mismatch ( YES I KNOW THIS IS A FAQ BUT..)
On Fri, 10 Jun 2011, Peter
can advise me...
--
/Peter
--
Mailman-Users mailing list Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://wiki.list.org/x/AgA3
Security Policy: http://wiki.list.org/x/QIA9
Searchable Archives: http
that is imported from mm_cfg, but you
# didn't find it above, it's probably in /usr/lib/mailman/Mailman/Defaults.py.
==
Peter West
Nicodemus said to him, 'How can
are at /usr/share/images/mailman
A copy of the mailman icons to the Apache2 dir doesn't show the images
at the footer.
What is the solution?
Peter
--
Mailman-Users mailing list Mailman-Users@python.org
http://mail.python.org/mailman/listinfo
on what to look at to correct this?
Thank you,
Peter
--
Mailman-Users mailing list Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://wiki.list.org/x/AgA3
Security Policy: http://wiki.list.org/x
Hello,
I apologize if this is trivial but I am not sure how really ask this
question and as such I am struggling to google for an answer. I used to
have one mail server (in/out bound smtp and imap). I now have an inbound
AV/Spam gateway, an imap server (with postfix doing local delivery via
Options ... - Sender Filter
- General Non Memeber rule : ACCEPT
But it doesnt do that. Still If I send a mail from a non subscribed account,
It holds up, and waits for moderation How could it be posibble? Did I
something make wrong?
Thx. Peter
Hi!
I'd like to get the members of a certain Mailman mailing list from a MySQL
database, preferebly online. (Not refreshing Mailman's DB periodically, but
getting Mailman to use my MySQL DB instead of its own). If this is not
possile, then please help me, how can I refresh Mailman's DB using a
...
Thanks for your help!
regards,
Peter
--
Mailman-Users mailing list
Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://wiki.list.org/x/AgA3
Searchable Archives: http://www.mail-archive.com
seem to be the variable I'm looking for.
Where does mailman get the urls that links to the lists in
/mailman/listinfo ??
thnx,
peter
--
Mailman-Users mailing list
Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman
mystupidlist
rmlist \ mystupidlist
rmlist \ mystupidlist
without success. Always a error like:
No such list: \ mystupidlist
any idea?
thnx,
peter
--
Mailman-Users mailing list
Mailman-Users@python.org
http://mail.python.org/mailman/listinfo
@python.org
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/
Unsubscribe:
http://mail.python.org/mailman/options/mailman-users/peter%40cww.org.uk
Security Policy
is: Is it possible to add addresses to the 'accepts' filter
of a mailinglist from the commandline?
(I would then let a cron job periodically extract the A members using
list_members and add those to the 'accepts' of B.)
Regards,
Peter
--
Mailman-Users
/python2.4/gzip.py, line 95, in __init__
fileobj = self.myfileobj = __builtin__.open(filename, mode or 'rb')
IOError: [Errno 13] Permission denied:
'/var/spool/mailman/archives/private/somelist/2006-April.txt.gz'
Peter
--
Mailman-Users mailing list
,
peter
--
mag. peter pilsl - goldfisch.at
IT-Consulting
Tel: +43-650-3574035
Tel: +43-1-8900602
Fax: +43-1-8900602-15
skype: peter.pilsl
[EMAIL PROTECTED]
www.goldfisch.at
--
Mailman-Users mailing list
Mailman-Users@python.org
http
Le Mercredi 4 Avril 2007 20:39, No One a écrit :
I have mailman up an running but message are bouncing because of a
complaint about the group that the scripts are running as. Here is the
error:
Command output: Group
mismatch error. Mailman expected the mail wrapper script to be
I have seen this error on the net but I cannot locate the problem/solution:
Recipient address rejected: User unknown in virtual mailbox table;
I am having trouble with Postfix and Mailman integration. I am using SQL
lookups for virtual mailbox domains. I believe my setup was working until I
I have migrated a list to a new machine but I see that for *one* link the URL
did not change. In the archives, the link More information about this list
is still the old one. This particular link appears in many places (on every
archive page).
Any ideas why this link did not change?
Pedro
I'm resending this one. Can anyone help?
I have migrated a list from an old installation (2.1.5) to a new machine
(running 2.1.8). It appears that the move was successful since I can access
its page at:
http://mailman.domain.com/mailman/admin/listname
But it does not show up on the main
Le Jeudi 22 Mars 2007 13:14, Dragon a écrit :
Peter wrote:
I'm resending this one. Can anyone help?
I have migrated a list from an old installation (2.1.5) to a new machine
(running 2.1.8). It appears that the move was successful since I can
access its page at:
http
Le Jeudi 22 Mars 2007 14:01, Peter a écrit :
Le Jeudi 22 Mars 2007 13:14, Dragon a écrit :
Peter wrote:
I'm resending this one. Can anyone help?
I have migrated a list from an old installation (2.1.5) to a new machine
(running 2.1.8). It appears that the move was successful since I
I have migrated a list from an old installation (2.1.5) to a new machine
(running 2.1.8). It appears that the move was successful since I can access
its page at:
http://mailman.domain.com/mailman/admin/listname
But it does not show up on the main admin page:
I am testing a basic installation of mailman 2.1.8 on OpenBSD 4.0.
When I try to reply to the confirmation request I get an error from postfix
saying that list[EMAIL PROTECTED] is not in the recipient table:
Recipient address rejected: User unknown in local recipient table
I thought the
Le Mardi 20 Mars 2007 11:17, Mark Sapiro a écrit :
Peter wrote:
I am testing a basic installation of mailman 2.1.8 on OpenBSD 4.0.
When I try to reply to the confirmation request I get an error from
postfix saying that list[EMAIL PROTECTED] is not in the recipient
table:
Recipient
Le Mardi 20 Mars 2007 21:27, Mark Sapiro a écrit :
Peter wrote:
I have not been able to have mailman generate the aliases automatically.
I decided, for now, to go manual. I put the aliases I got from
'genaliases' inside postfix's alias file and then generated the new db
('newaliases
Le Mardi 20 Mars 2007 23:53, Mark Sapiro a écrit :
Peter wrote:
IOError: [Errno 13] Permission denied: '/var/spool/mailman/data/aliases'
$ ls -lh /var/spool/mailman/data/aliases
-rw-r--r-- 1 root _mailman 0B Mar 20 14:31 aliases
$ chmod 660 /var/spool/mailman/data/aliases
Le Mercredi 21 Mars 2007 00:20, Mark Sapiro a écrit :
Peter wrote:
Le Mardi 20 Mars 2007 23:53, Mark Sapiro a écrit :
What is the group of aliases.db?
$ ls -lh /var/spool/mailman/data/aliases*
-rw-rw 1 _mailman _mailman 10.4K Mar 20
23:52 /var/spool/mailman/data/aliases
-rw-r
I have an old installation (2.1.5) that I want to move to a new machine
(running 2.1.8). I was wondering how to go about moving the lists and
subscribers over. After that I will worry about the archives.
The first machine is running Mandrake Linux and the new machine is running
OpenBSD 4.0.
Le Samedi 3 Février 2007 22:50, Mark Sapiro a écrit :
Peter wrote:
Le Samedi 3 Février 2007 15:37, Patrick Bogen a écrit :
On 1/31/07, Peter Matulis [EMAIL PROTECTED] wrote:
Can someone explain to me how mailman and the web server can
exist on separate machines? I am new to mailman
Le Samedi 3 Février 2007 15:37, Patrick Bogen a écrit :
On 1/31/07, Peter Matulis [EMAIL PROTECTED] wrote:
Can someone explain to me how mailman and the web server can exist
on separate machines? I am new to mailman and I'm having a hard
time understanding how mailman communicates with its
Can someone explain to me how mailman and the web server can exist on
separate machines? I am new to mailman and I'm having a hard time
understanding how mailman communicates with its web server. I have a
new client that connects to an external web server to add list members
but mailman (and
(read-only).
Firstly, should I attempt to migrate data/files over to the new system
or should I start fresh?
The new system will be running OpenBSD 4.0.
Other comments welcome.
Peter
--
Mailman-Users mailing list
Mailman-Users@python.org
http
I have an issue with a list I am running some messages sent to the list are
getting treat as spam by some users systems but not all of the messages are.
There does not seem to be a pattern at this point in time, the messages I
know that have been treat as spam have come from users using
mailman 4096 Jan 20 16:19 tests
Thanks,
Peter
--
Mailman-Users mailing list
Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http
Don't know why but it works almost ;-)
I see a webpage and can create a new mailinglist...
Only one last problem I can't create a new mailinglist..
Receive this error:
Error: You are not authorized to create new mailing lists
I changed the administrators passwd and list creater passwd with
Hi All,
Mailman almost works... First some problems with the webserver but that's
almost solved (can't use the list creaters and adminstrator password)
Also got the following problem:
I have a working postfix, mysql and virtual domains on the testserver.. This
works fine and is also on the
[mailto:[EMAIL PROTECTED]
Verzonden: maandag 22 januari 2007 16:59
Aan: Peter Coolen; mailman-users@python.org
Onderwerp: Re: [Mailman-Users] problems with gid when installing
Peter Coolen wrote:
Don't know why but it works almost ;-)
I see a webpage and can create a new mailinglist
Other issues in your apache config.
The Directory section should be /usr/local/mailman/, not
/usr/local/mailman/cgi-bin/. This is primarily for public archives.
Also, if you are going to have public archives, you want
Alias /pipermail/ /usr/local/mailman/archives/public/
Finally,
You don't put '$prefix' literally. $ prefix stands for the
path you provided to configure with the --prefix= option
(default /usr/local/mailman).
What is in your Apache configuration now?
Some apache config lines for mailman
Alias /pipermail/ /usr/local/mailman/archives/public/
201 - 300 of 518 matches
Mail list logo
