Re: relayd: pfe_route: failed to add gateway 22 Invalid argument

Hi Claudio, Am 29.06.23 um 09:01 schrieb Claudio Jeker: On Thu, Jun 29, 2023 at 08:53:05AM +0200, Jörg Streckfuß wrote: Hi list, here is a small addition. Adding and deleting the route to and from routing table on the command line works as expected: fw1 # route add 2001:::::4

Re: relayd: pfe_route: failed to add gateway 22 Invalid argument

Hi list, here is a small addition. Adding and deleting the route to and from routing table on the command line works as expected: fw1 # route add 2001:::::4/128 2001:::::4 -label geo_service add host 2001:::::4/128: gateway 2001:::::4 fw#

relayd - conflict between outer and inner ip address

Hello, I'm in the process to setup relayd as a loadbalancer, which will distribute http request to three webservers. I think this is a really common setup. I'm using OpenBSD 4.4 this is my config: snip www_public=10.0.0.1 www1= 10.0.0.1 www2= 10.0.0.2 www3= 10.0.0.3 interval 10

Re: ipmi not working on poweredge 2850

Am Mon, 14 Jul 2008 22:03:59 +0200 schrieb Ariane van der Steldt [EMAIL PROTECTED]: On Mon, Jul 14, 2008 at 05:09:10PM +0200, J??rg Streckfu?? wrote: today i tried to read the esm log on a poweredge 2850 running OpenBSD 4.3 stable. In the past i could see much more output from the

ipmi not working on poweredge 2850

Hi list, today i tried to read the esm log on a poweredge 2850 running OpenBSD 4.3 stable. In the past i could see much more output from the internal sensors than only the raid sensor snip [EMAIL PROTECTED] root # sysctl hw.sensors hw.sensors.ami0.drive0=online (sd0), OK /snip the dmesg says

Re: multimode fiber card recs for OpenBGPD

Am Wed, 24 Oct 2007 22:25:32 +0200 schrieb Henning Brauer [EMAIL PROTECTED]: * N.J. Thomas [EMAIL PROTECTED] [2007-10-24 19:28]: I have two servers that I would like to setup to run OpenBGPD for our border routers. I need to find a supported PCIe (not PCI-X) fiber card that runs

hoststated: fatal: relay_dispatch_pfe: desynchronized,

Hi list, First a tribut for the good work to the authors of hoststated. In the future i plan to use hoststated in production environments to check for the availability of our webservices. But before I set it up on my production machine I would make some testing. I took two tiny Soekrises with

Re: hoststated: fatal: relay_dispatch_pfe: desynchronized,

Am Wed, 6 Jun 2007 15:53:03 +0200 schrieb Pierre-Yves Ritschard [EMAIL PROTECTED]: On Wed, 6 Jun 2007 14:09:19 +0200 Jvrg Streckfu_ [EMAIL PROTECTED] wrote: Hi list, First a tribut for the good work to the authors of hoststated. In the future i plan to use hoststated in production

Re: SSL Certs on Carp'd web servers

Am Mon, 19 Feb 2007 16:22:59 +0100 schrieb Nico Meijer [EMAIL PROTECTED]: Hey Bill, Is there any issues that are gonna bite me with doing this? No, not that I know of. I do this with a bunch of boxes. I only use the carp'ed IP address on either box when configuring apache. HTH... Nico

tcp flags with tcpdum and pflog0

Hi list, I'm trying to find out if it is possible to see the tcp flags in a tcpdump output of the device pflog0 (blocked packets). When i take a physikal interface like em0 the following command shows me the tcp flags tcpdump -nevvvi em0 tcp But the same with pflog0 only shows me this further

Re: tcp flags with tcpdum and pflog0

Am Tue, 5 Sep 2006 12:34:32 +0200 schrieb Joachim Schipper [EMAIL PROTECTED]: I believe this means the packet is truncated. I could be wrong, but if this is correct, add -s with an appropriate size [1]. Yeah, that's it. Thanks. Joerg [demime 1.01d removed an attachment of type

PERC 4e/si support in ami?

hi list, I'm searching for an 1 U server-platform-solution for a redundant firewall-system based on openbsd. The firewall-system should support raid 1 and at least 8 NIC's. My first choice is an Dell 1850 with embedded PERC 4e/Si controller. I belief the e means embedded. Does openbsd