Hello -
I need to build a server that will run PostgreSQL 8, handling up to 150
connections. The current database size is roughly 2GB now with 2.8 million
rows in it's biggest table. This is expected to continue to grow steadily over
time.
The hardware I have to work with is a single 3Ghz p4
Hello -
I have vlan0 mapped on to fxp0
I have vlan1 mapped on to fxp0 as well.
I have carp0 mapped on to vlan0
I have carp1 mapped on to vlan1
I have carp2 mapped on to fxp1 (internal)
If I unplug the cable on fxp1, everything works.
If I unplug the cable on fxp0, the second box changes to
On Tue, Aug 23, 2005 at 11:41:10PM +0100, Stuart Henderson wrote:
--On 23 August 2005 18:26 -0400, David Hill wrote:
Is it possible to have fxp0 flag vlan0, then vlan0 flag carp0 that
the link is down?
yes, in -current. plus.html says: Make vlan(4) aware of the underlying
link state
Hello -
Are there plans to add sendfile()/zero-copy to OpenBSD to improve web server
performance?
Thanks
David
Hello -
We are planning to build an OpenBSD server to be our edge router. We are
terminating 5 DS3's into two Cisco routers and using bridge-groups and vlans to
separate the connections. This works very well in our test setup.
We plan on building two servers and using carp for redundancy.
Hello -
My neighbor has a Linksys WAP11 access point. We would like to join
networks.Both our networks are in our basements. The distance is
about 70ft. Would I get better signal/performance buying something
similar to my neighbor, or purchasing a wireless PCI card for my OpenBSD
box? If
On Tue, Jun 28, 2005 at 08:53:13AM -0400, Josh Grosse wrote:
On Mon, Jun 27, 2005 at 11:46:42PM -0700, Bruce Bauer wrote:
..Get another WAP11($40-$60), make sure they have the same firmware version
and configure them as a wireless bridge. They can be configured so they
will only talk to
On Mon, Jul 11, 2005 at 10:49:09PM +0800, jking1 wrote:
#/etc/pf.conf #
ext_if=\fxp0\
int_if=\rl0\
web_server=\192.168.0.1\
pcanywhere_port=\5631\
sql=\1433\
#table spamd persist
#table spamd-white persist
scrub
On Sun, Nov 13, 2005 at 02:16:07PM -0800, b h wrote:
Hi
Okay, I feel really stupid, but that's beside the
point. I need to be able to recover this machine.
It's running current built from src as of November 7.
I was brilliantly removing my src directory with a rm
-rf * to get a
On Sat, Nov 19, 2005 at 06:24:49AM +1300, Fletch wrote:
Greets
Started to install 3.8 on my laptop (Compaq Presario 2100(2133AP)) this
morning, but ran into a small issue.
Make the floppy38.fs, boot off it fine, starts doing all its kernel
driver loading stuff, but then stops at
--
On Fri, Jan 13, 2006 at 02:43:21PM -0500, Michael Steinfeld wrote:
On 1/13/06, Todd C. Miller [EMAIL PROTECTED] wrote:
Due to some just-committed types changes you will have to build
install gcc before a make build will succeed.
New snapshots will be available in the next few days.
On Sat, Feb 18, 2006 at 12:57:05PM +0100, Olivier Mehani wrote:
Hello list,
I'm playing with IPv6 in 3.8 and came up to this strange problem.
My IPv6 connectivity is given by a broker (xs26.net) and I have set up a gif
interface to use it (gif0):
/etc/hostname.gif0 contains:
tunnel
On Mon, Feb 20, 2006 at 10:34:03PM +0200, Edgars wrote:
So, nobody knows? :(
Hello!
I want to know about this RAID controller, is it supported or no?
On hw page i didn't find him, but in google and monkey.org i found that
somebody tried it with OpenBSD 3.4
On Tue, Feb 21, 2006 at 05:17:24PM +0100, Martin Schrvder wrote:
Hi,
is there something like lastlog(8) for openbsd? Or has someone
ported the shadow-utils?
Best
Martin
--
http://www.tm.oneiros.de
man 1 last
On Fri, Mar 24, 2006 at 10:38:13AM -0300, Hutger H. wrote:
Hi all,
I've got a problem running ftp through my PF firewall. That is the issue:
- I installed a new firewall (OpenBSD 3.9) in my network to connect some
users to the Internet through a new link. The users need to connect via
FTP
On Tue, Apr 04, 2006 at 05:01:21PM -0700, Smith wrote:
I bought a new 1U server with an Intel SE7221BK-1E Entry Server Board, a
LSI MegaRAID Sata 150-4D SER523 REV B2 card, and two Seagate Barracuda
400 GBytes hard drives.
Problem:
When I install OpenBSD 3.8, and I get to the part that
On Wed, Apr 05, 2006 at 01:44:22AM +0100, Stuart Henderson wrote:
On 2006/04/04 20:21, David Hill wrote:
Are you using floppyB, which supports RAID controllers?
http://www.openbsd.org/faq/faq4.html#MkInsMedia
OpenBSD 3.8 (RAMDISK_CD) #794: Sat Sep 10 15:58:32 MDT 2005
So does the CD
On Fri, Apr 07, 2006 at 09:41:56AM -0600, Jeff Ross wrote:
Hi all,
I've had several users reporting that mail to them from gmail and aol
accounts has been bouncing. I finally got my hands on the bounce
messages from one of the gmail messages. Two were Delivery Status
Notifications like
On Fri, Apr 07, 2006 at 10:49:06AM -0600, Jeff Ross wrote:
On Fri, 7 Apr 2006, David Hill wrote:
On Fri, Apr 07, 2006 at 09:41:56AM -0600, Jeff Ross wrote:
Hi all,
I've had several users reporting that mail to them from gmail and aol
accounts has been bouncing. I finally got my hands
On Fri, Apr 07, 2006 at 02:41:17PM -0600, Jeff Ross wrote:
On Fri, 7 Apr 2006, Darrin Chandler wrote:
Jeff Ross wrote:
Delivery to the following recipient has been delayed:
[EMAIL PROTECTED]
Message will be retried for 1 more day(s)
Technical details of temporary failure:
On Fri, Jun 02, 2006 at 02:32:26PM +0200, Jasper Bal wrote:
Jasper Bal schreef:
Hi all,
My isp blocks traffic on port 25. So i decided to experiment on adding
a listening port for sendmail. I added port 53, because this is never
blocked. I added the following line in sendmail.cf:
On Thu, Jul 10, 2008 at 04:56:07PM +0200, GVG GVG wrote:
Dear List,
having a 4.3 and sendmail installation, the default locations where the
mails go is /var/mail/$USER. How can I change that and point to a Maildir
formatted location?
Thanks
George
Hi George -
You need to use a mail
have
to define. Tried few combinations with no success!
Thanks for your help
George
Use the size of your MTU, which can be found my using ifconfig.
--
David Hill
What are the spaces in the IP addresses?
On Tue, Aug 16, 2011 at 11:46:26AM -0500, James Flom wrote:
:Hi all,
:
:Using a snapshot from Aug 1st I can't get more than one of these relays to run
:at the same time with the fallback forward to in there, but up to 3 at once
:with that line removed from
On Wed, Jul 22, 2009 at 03:06:25PM -0400, Jeremy Chase wrote:
Hi Guys,
My iwi interface works very well if I set it up with
/etc/hostname.iwi0, but if I change access points I can usually not
get onto a new network. For example, consider this scenario:
At location 1 with open AP 'dlink'
This email comes from kd85.com.
contact-hdl: CCOM-138654
person: Wim Vandeputte
organization: KD85.com bvba
email:w...@kd85.com
address: Kasteeldreef 85
city: Lovendegem
postal-code: 9920
country: BE
phone:+32.478217355
On 08/13/10 13:46, disgrun
On 08/15/10 22:22, David Hill wrote:
This email comes from kd85.com.
contact-hdl: CCOM-138654
person: Wim Vandeputte
organization: KD85.com bvba
email:w...@kd85.com
address: Kasteeldreef 85
city: Lovendegem
postal-code: 9920
country: BE
phone
This has been fixed 4.8
On Thu, Aug 19, 2010 at 03:08:23AM +0300, ?? ?? wrote:
Hi
I move from 4.6 to 4.7, rewrite my pf.conf rules to match new style.
Everything works fine, but when I try to traceroute a host with -I flag
(force to use icmp) on my obsd fw
I got Request time out
On Thu, Dec 23, 2010 at 03:48:49PM -0600, Orestes Leal R. wrote:
:I want to edit the crontab with nano but by default vi it's invoked
:when I do 'crontab -e'
:
-eEdit the current crontab using the editor specified by the
VISUAL or EDITOR environment variables. After
total
I hope this is enough info.
Thanks.
Mike
--
David Hill
30 matches
Mail list logo
