(2014; previously I was using 2013). I removed the entire MacTeX 2014
version and installed it afresh, but this did not help either.
It seems to be a Mac problem. Ubuntu (14.04) also looks for a bbl file, but
simply passes over it if none is found (see attachment).
I would be very grateful
in calt table, but referenced via 'lookup'
mechanism.
lookup calt5 {
#sub @calt30' @calt30' by [a.I_ ... f_dotlessi._I];
} calt5;
language ENG ; # English
script DFLT;
lookup calt5;
To me it is quite unusual.
Jan
attachment
Hello,
marks of attachments in the attached MWE are aligned in the following way:
- after A and C - horizontally,
- after B - vertically.
The only difference is that \blank precedes in the B case.
So - how to force horizontal alignment for attachment marks in the B case,
supposing
: Alan sent me the same file as a text
attachment and it ran just fine. But the text I copied from his first
email did not. Doing a quick compare of the two files in Notepad++
indicated that the two files are identical, but there must be some unseen
spurious character caused by the email
On Wed, 14 Jan 2015 12:58:35 -0700, Idris Samawi Hamid ادريس سماوي حامد
isha...@colostate.edu wrote:
It's one of those weird things: Alan sent me the same file as a text
attachment and it ran just fine. But the text I copied from his first
email did not. Doing a quick compare of the two
Replying to myself the problem seems related to the use of the ex label.
this works
\define[1]\Ex{\externalfigure[code/#1]
\useattachment[#1][code/#1.scd]
\attachment[#1]
}
(so this does not work anymore
http://wiki.contextgarden.net/Verbatim_text#Embedding_the_source_code
http
In the code in the attachment I have intend that everytime the data
generated by Lua are updated metapost should make immediately their
representation.
However, it insists into represent only the last data generated.
How can I fix this problem?
thanks
Jorge
calltemplates.tex
Description: TeX
Dear list,
In the previous version of a programming manual I wrote I used this definition:
\define[1]\Ex{\externalfigure[code/#1]
\useattachment[ex][code/#1.scd]
\attachment[ex]
}
In this way I could have
\Ex{sintesi/sineArray}
where sintesi/sineArray.scd is the path of code example
]
\useattachment[ex][code/#1.scd]
\attachment[ex]
}
In this way I could have
\Ex{sintesi/sineArray}
where sintesi/sineArray.scd is the path of code example
and sintesi/sineArray.pdf is the path of a pdf figure with coloured syntax .
I’m revising the manual and using mk IV.
Now, concerning
-- next part --
A non-text attachment was scrubbed...
Name: nototest.tar.gz
Type: application/x-gzip
Size: 9937 bytes
Desc: not available
URL:
http://www.ntg.nl/pipermail/ntg-context/attachments/20140927/a0769181/attachment.bin
: http://wiki.contextgarden.net/Catalogue_raisonné
Also, it changes the resolution only at inclusion into the pdf or it does it
on original files ? My concern is to give the sources in attachment of the
document, so if I don't change those files, the document will still be huge
about how to use it ?
Hi,
Here an example: http://wiki.contextgarden.net/Catalogue_raisonné
Also, it changes the resolution only at inclusion into the pdf or it does it
on original files ? My concern is to give the sources in attachment of the
document, so if I don't change those files
? My concern is to give the sources in attachment of the
document, so if I don't change those files, the document will still be huge.
There is a way to include the source without duplicates images ?
or which resolution is appropriate.
It depends on the printer. 300dpi is often enough
in AUCTeX
to by used when processing ConTeXt files?
Sincerely,
Gour
--
As the ignorant perform their duties with attachment to results,
the learned may similarly act, but without attachment, for the
sake of leading people on the right path
{document.matthias.lua_columnvector(#1)}}
\starttext
\startformula
\columnvector{{1,2,3}} %% watch the double { !
\stopformula
\stoptext
--
luigi
-- next part --
An HTML attachment was scrubbed...
URL:
http://www.ntg.nl/pipermail/ntg-context/attachments/20140523/569165d6
{document.matthias.lua_columnvector(#1)}}
\starttext
\startformula
\columnvector{{1,2,3}} %% watch the double { !
\stopformula
\stoptext
--
luigi
-- next part --
An HTML attachment was scrubbed...
URL:
http://www.ntg.nl/pipermail/ntg-context/attachments/20140523/569165d6
).
And is it possible to hide the icon completely?
(I tried method=hidden but this produces attachment.txt instead of
t4.mkiv as an attachment).
I think it’s a bug because there appears only a empty attachment in the
document.
i patched the keys cf. your mail but is there more to fix
] % name file author title subtitle
%
% \attachment[sometag][extra specs]
% \attachment[test.tex]
% \attachment[file=test.tex]
% \attachment[file=test.tex,method=hidden]
% \attachment[name=newname,file=test.tex]
% \attachment[title=mytitle,name=newname,file=test.tex]
%
% indirect
%
% \defineattachment
[sometag][specification] % name file author title subtitle
%
% \attachment[sometag][extra specs]
% \attachment[test.tex]
% \attachment[file=test.tex]
% \attachment[file=test.tex,method=hidden]
% \attachment[name=newname,file=test.tex]
% \attachment[title=mytitle,name=newname,file=test.tex]
%
% indirect
... One more question: the following example seems not to contain any
attachment:
t4.mkiv
\attachment[t4.mkiv]
\starttext
AAA
\stoptext
What's wrong?
Lukas
Comments from scrn-wid.mkvi:
% old but stil valid method:
%
% \useattachment[test.tex]
% \useattachment[whatever
Am 23.04.2014 um 11:32 schrieb Procházka Lukáš Ing. - Pontex s. r. o.
l...@pontex.cz:
... One more question: the following example seems not to contain any
attachment:
t4.mkiv
\attachment[t4.mkiv]
\starttext
AAA
\stoptext
What's wrong?
Add \setupinteraction[state
completely?
(I tried method=hidden but this produces attachment.txt instead of
t4.mkiv as an attachment).
Best regards,
Lukas
--
Ing. Lukáš Procházka [mailto:l...@pontex.cz]
Pontex s. r. o. [mailto:pon...@pontex.cz] [http://www.pontex.cz]
Bezová 1658
147 14 Praha 4
Tel: +420 241 096 751
Fax
completely?
(I tried method=hidden but this produces attachment.txt instead of
t4.mkiv as an attachment).
I think it’s a bug because there appears only a empty attachment in the
document.
Wolfgang
___
If your question
attachment: JK.vcf___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist
it's not clear to me what the bug is
Hans
Ok, the bug is, that, if you try my code with the mentioned font (you
can take it from the html source code to be sure to get the right
unicode char, here:
http://www.ntg.nl/pipermail/ntg-context/attachments/20140403/22b89844/attachment-0001.html
at 12pt]
\definefont[arabicuth][file:UthmanicHafs1Ver09.ttf*arabic at 12pt]
\starttext
\startalign[r2l]
\arial
كَلَّا لَا تُطِعْهُ \overbar{وَٱسْجُدْ} وَٱقْتَرِب ۩
\arabicuth
كَلَّا لَا تُطِعْهُ \overbar{وَٱسْجُدْ} وَٱقْتَرِب ۩
\stopalign
\stoptext
and compare the compiled pdf in attachment.
You
} وَٱقْتَرِب ۩
\stopalign
\stoptext
and compare the compiled pdf in attachment.
You can download the used font-file UthmanicHafs1Ver09.ttf here:
http://fonts.qurancomplex.gov.sa/download/UthmanicHafs1Ver09Font.zip
We have discussed this font here month ago, hans commented: yes, but calling
\starthanging{
\placefigure[here,none]{}
{\startcombination[1*2]
{\externalfigure[line.png][width=5cm]}{\tfx\input ward \endgraf}
{\externalfigure[line.png][width=5cm]}{}
\stopcombination}
}\input knuth
\stophanging
\stoptext
attachment
is better, for consistency with other periods in
other sentences.
So far, I have defined ellipsis (all periods having the same size) as:
\unexpanded\def\ell{{\def\periodswidth{.4em}\periods[5]}}
Regards,
Stéphane.
attachment: quote_block
Hans,
Attached is a screenshot of what your output looks like in Evince. I am
trying to get the Page Number listed as A for the Appendix.
Troy
attachment: screenshot.png___
If your question is of interest to others
the old ConTeXt ver 2013.12.24), I
see the bookmarks in Evince (ver 3.10.3 on Linux). See the attached
figure.
Aditya
attachment: bookmarks.png___
If your question is of interest to others as well, please add an entry
screenshot).
Troy
attachment: screenshot.png___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
My desired PDF PageLabels are in the attached PNG. I have also attached a
ConTeXt source file that attempts attempts this, but clearly I am missing a
bit. I would appreciate any help in accomplishing this effect.
Troy
attachment: screenshot.png
foo.tex
Description: TeX document
foo.tex
Description: TeX document
foo.pdf
Description: Adobe PDF document
attachment: screenshot.png___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl
On 11/29/2013 12:51 AM, Aditya Mahajan wrote:
It seems that there is a mixup in the backend code for including an
attachment.
For example, when I use:
\setupinteraction[state=start]
\starttext
The current file is \attachment[tag][file=\jobname.tex, name=test.tex,
title={Whatever}]
\stoptext
It seems that there is a mixup in the backend code for including an
attachment.
For example, when I use:
\setupinteraction[state=start]
\starttext
The current file is \attachment[tag][file=\jobname.tex, name=test.tex,
title={Whatever}]
\stoptext
I was expecting that the current file
to work with this font. See
attachment, the font is wider, but not bold. See the difference to the
intended result, achieved with Corel Draw (with the same font), see
attachment.
In ConTeXt I had the following code (see attachment for the compiled pdf):
\definefont[arabic
To be more concrete, I added an jpeg from CorelDraw, which shows, what I
mean with these little signs above the letters. They are vanished in
ConText, but are correctly set in CorelDraw with the very same font.
Huseyin
attachment
ٱلْقَيُّومُ
\stoptext
How can I get these fake bolds with this setup? Or is it
absolutely necessary to use Simplefont for these fake-bolds?
The feature is unrelated to simplefonts.
Wolfgang
Thanks Wolfgang, but that does not seem to work with this font. See
attachment, the font is wider
Thanks Wolfgang, but that does not seem to work with this font. See
attachment, the font is wider, but not bold.
The extend feature stretches the glyphs to get narrow or wide font but it
doesn’t embolden it.
The best solution is to get a font with a real bold style, money shouldn’t be a
problem
-version, so see the attachment. With
the font arabtype everything is fine, with the font uthmantnver10
the sign is missing.
Huseyin
context_missing.pdf
Description: Adobe PDF document
___
If your question is of interest
a verys
small number. There are some problems like this. Are they easy to fix,
or is this problem deeply involved?
Huseyin
attachment: lilmuttaqiyn.jpg___
If your question is of interest to others as well, please
result. How to do get this?
Thanks alot.
Huseyin
attachment: alignedparttitle.jpg___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl
On 9/21/2013 7:50 AM, Thangalin wrote:
Hi,
The attached file does not compile in ConTeXt.
However, if the \placeindex is substituted for \completeindex, then the
document compiles.
Any idea how to use a deeptextcommand and firstcharacter as shown in the
attachment while also using
\stoptext
are we talking about the same font?
I used the files which came with my office installation where the spaces are
wrong
(see attachment) but when I use the files from your example the text looks ok.
Wolfgang
consolas.pdf
Description: Adobe PDF document
cd
x y z
\stoptyping
\stoptext
are we talking about the same font?
I used the files which came with my office installation where the spaces are
wrong
(see attachment) but when I use the files from your example the text looks ok.
i have no clue
Hans
Hi there,
in the attachment you see an example of a toc (of some german
bestseller) I want to reproduce in ConText.
The only problem left, I could not achieve myself, is: How to set the
chapter-titles in the toc without pagenumbers (as you see in the
attached jpg)?
Thanks for your help
Am 26.08.2013 um 12:20 schrieb H. Özoguz h.oezo...@mmnetz.de:
Hi there,
in the attachment you see an example of a toc (of some german bestseller) I
want to reproduce in ConText.
The only problem left, I could not achieve myself, is: How to set the
chapter-titles in the toc without
the values for each of the items.
I don't know if there is any value separating the measurements from the labels.
Thank you!
attachment: showframe.png___
If your question is of interest to others as well, please add
The following patch(pasted below and also attached as an attachment) fixes
the bug that \setupFLOWlines[rulethickness=whatever] have no effects:
--- m-chart.lua.orig2013-03-12 09:22:42.0 +0800
+++ m-chart.lua 2013-08-15 10:52:08.617268698 +0800
@@ -499,7 +499,7
] ...
No, unfortunately that one doesn't work so well (see attachment
hagen-kan1-luatex.pdf).
in context, there is experimental support for devanagari
\definedfont[file:kedage-n*devanagari-one]
but it all depends on what the font provides
Is there any way to find out the font's possibilities, if one
by the
opportunity and delighted to attend. I look forward to meeting
you. Thank you again for the invitation.
\stopletter
\stoptext
-- next part --
An HTML attachment was scrubbed...
URL:
http://www.ntg.nl/pipermail/ntg-context/attachments/20130715/b268035b
Hi All,
I'm trying to get a table header with such bottom border:
||
I plan to use an overlay to overlap the the internal borders of the cells. But
in this case, the table header somehow slightly shifted to the left relative to
the body (see attachment). Is it possible to remove
somewhere on the site, but in case it is not, I am attaching it
here.
--
Siep Kroonenberg
attachment: context_logo_inv.svg___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist
edges...
Works here. Did you forget to compile with the --arrange flag?
Hi,
--arrange flag has no impact on the output.
Please check the outputfile in attachment. Maybe it is just my
misunderstanding but I think that page number should be placed on the
left side of page 2, on the right side
On Fri, May 31, 2013 at 01:52:22PM +0200, H. Özoguz wrote:
Hi there,
I cant run the font ramnaclq-webfont.ttf (see attachment) in Context.
That is a broken, a so called “ASCII hack” font that (ab)uses ASCII code
points for Arabic. In short it is a broken font and will not work.
Regards
Salaam, Huseyn,
On Fri, 31 May 2013 07:24:20 -0600, H. Özoguz h.oezo...@mmnetz.de wrote:
With the font file maddina.ttf I have the same problems. But this font
is clearly not broken, you can download it here:
http://www.searchfreefonts.com/free/quran-madina.htm (or see attachment
an achieve this??The textblock is the width of all three columns including the space between the columns, see the attachment for the result I get.Wolfgang
test.pdf
Description: Adobe PDF document
___
If your question is o
the columns, see the attachment for the result I get.
Wolfgang
___
If your question is of interest to others as well, please add an entry to
the Wiki!
maillist : ntg-context@ntg.nl /
http://www.ntg.nl/mailman/listinfo
the wiki's [[Dummy text]] article. (Which also mentions the ipsum
module for lorem ipsum text, by the way.)
http://wiki.contextgarden.net/Dummy_text
Cheers,
Sietse
attachment: boxes-texbook.png___
If your question
]%
\offinterlineskip
\framed[width=4.75cm,frame=off,height=2cm]{\blank[-3mm]#1}\\
\framed[width=4.75cm,frame=off,height=3cm]{#2}\\
\framed[width=4.75cm,frame=off,height=2.4cm]{#3}
\stopframed}
\starttext
\esl[blub][blub][blub]
\stoptext
which produces cards with some text (see attachment).
Now, I only
start a new thread by using
the compose feature of your mailer, or equivalent. As I see that
you're using Thunderbird, I'm surprised that it doesn't display the
emails in one thread, by the way.
Arthur
attachment: email
}\\
\framed[width=4.75cm,frame=off,height=3cm]{#2}\\
\framed[width=4.75cm,frame=off,height=2.4cm]{#3}
\stopframed}
\starttext
\esl[blub][blub][blub]
\stoptext
which produces cards with some text (see attachment).
Now, I only want to write in the editor the commands
\esl[blub1][blub1][blub1]
\esl
find
in further testing, see attachment for this code:
\definefont[amiri][file:UthmanTN1Ver10.ttf*arabic at 17 pt]
\define[1]\Arab{\setupalign[r2l]\amiri#1}
\starttext
\Arab{
لرَّحْمَـٰنِ
}
\stoptext
In context the two signs are set one upon the other (sukun and
fatha), see the second attachment
On Wed, May 08, 2013 at 11:03:28PM +0200, Hans Hagen wrote:
On 5/8/2013 10:58 PM, H. Özoguz wrote:
seems like an issue with liga ... i'm not sure if that's a context
problem
Hmm, see in the attachment the output of MS-Word, with activated
ligatures. So it has to do anything with ConText
I uploaded a beta that might fix it, but it needs more testing. The
issue might have been introduced when support was added for more complex
ligature building, compare for instance this:
Thanks Hans! Indeed, it was a fix, but there are still problems I find
in further testing, see attachment
have still
problems, which I dont have with MS Word, see this example:
\definefont[amiri][file:UthmanTN1Ver10.ttf*arabic at 17 pt]
\define[1]\Arab{\setupalign[r2l]\amiri#1}
\starttext
\Arab{
نَسْتَعِينُ وَلَا الضَّالِّينَ
}
\stoptext
The vocalisations are set wrong, see attachment. Specially
wrong, see attachment. Specially with a final
nuun there are problems. It is not a problem of the font, because in
Word they are set correctly. Does this come from the extensions ConTeXt
do not support, or is there an easy way to fix?
extensions? fonts have features and these prescribe
seems like an issue with liga ... i'm not sure if that's a context problem
Hmm, see in the attachment the output of MS-Word, with activated
ligatures. So it has to do anything with ConText, or not? Or maybe this
font uses in some way properties of Word in handling fonts?
Huseyin
On 5/8/2013 10:58 PM, H. Özoguz wrote:
seems like an issue with liga ... i'm not sure if that's a context
problem
Hmm, see in the attachment the output of MS-Word, with activated
ligatures. So it has to do anything with ConText, or not? Or maybe this
font uses in some way properties of Word
i only followed this topic on a distance so first we need an example
that clearly shows a problem
I described an example here:
http://www.ntg.nl/pipermail/ntg-context/2013/073025.html
as a code, and with a pdf in attachment. Maybe it is not clear what I
mean?: The slash is set too low
On 5/7/2013 8:10 PM, H. Özoguz wrote:
i only followed this topic on a distance so first we need an example
that clearly shows a problem
I described an example here:
http://www.ntg.nl/pipermail/ntg-context/2013/073025.html
as a code, and with a pdf in attachment. Maybe it is not clear what I
[r2l]\Shehw#1}
\starttext
\Arab[
اللَّـهِ
]\blank
\Arab[
اللهِ
]
\stoptext
(The lower one is the correct symbol, the upper one not.) If you can't
compile, look at the attachment.
The upper one has the typographical correct symbol under it (below left,
kassra, looks like a slanted hyphen
\stoptext
gives an i without dot, see attachment. And the letters i and f are
curiously bonded.
The second attachment shows the same word written in MS-Word, again with
Adobe Garamond Pro, without this curiosity. Where this comes from and how to
fix?
This is a ligature [1], you can
Hi,
\usemodule[simplefonts]
\setmainfont[AGaramondPro]
\starttext
Amficool
\stoptext
gives an i without dot, see attachment. And the letters i and f
are curiously bonded.
The second attachment shows the same word written in MS-Word, again with
Adobe Garamond Pro, without this curiosity
Am 24.04.2013 um 10:39 schrieb H. Özoguz h.oezo...@mmnetz.de:
Hi,
\usemodule[simplefonts]
\setmainfont[AGaramondPro]
\starttext
Amficool
\stoptext
gives an i without dot, see attachment. And the letters i and f are
curiously bonded.
The second attachment shows the same word
On Wed, Apr 24 2013, H. Özoguz wrote:
The second attachment shows the same word written in MS-Word, again with Adobe
Garamond Pro, without this curiosity.
Perhaps a bug in M$-Word...? ;)
--
Peter
Am 24.04.2013 um 11:00 schrieb Peter Münster pmli...@free.fr:
On Wed, Apr 24 2013, H. Özoguz wrote:
The second attachment shows the same word written in MS-Word, again with
Adobe
Garamond Pro, without this curiosity.
Perhaps a bug in M$-Word...? ;)
Microsoft added support
to fix this? (If you do
not have this font, look at the attachment.) And if the reason is not
clear (as gridding conflicts some times with other rules without obvious
reason), is there a workaround?
Thanks!
Huseyin
gridding_garamond.pdf
Description: Adobe PDF document
not work properly here, as you see, we have an
empty line after zwar auch, why, and how to fix this? (If you do not have
this font, look at the attachment.) And if the reason is not clear (as
gridding conflicts some times with other rules without obvious reason), is
there a workaround?
Does
fortlaufend, doch ohne innere Uberzeugung erfüllst.
\stoptext
+++
You can see in the example, that I could find the reason for this: It is
the height of the letter Ü. See attachment, is this fixable?
Huseyin
gridding_garamond_typescript.pdf
Description: Adobe PDF
. See attachment, is this fixable?
You can increase the linespacing with a relative
\setupinterlinespace[line=3.2ex] % default: line=2.8ex
or a absolute
\setupinterlinespace[line=14pt]
value.
Wolfgang
___
If your
On 2013–03–28 pol stra wrote:
Is there a way to automatically attach the source file to the produced pdf?
\setupinteraction [state=start]
\starttext
\attachment[file=attachfile.tex, title=Some file, author=Me]
\stoptext
signature.asc
Description: Digital signature
Is there a way to automatically attach the source file to the produced pdf?
\setupinteraction [state=start]
\starttext
\attachment[file=attachfile.tex, title=Some file, author=Me]
\stoptext
Ok. It works, thank you
script
that does a lot of book-keeping. So, getting the full functionality of all
these packages will require adapting those python script to generate
results in ConTeXt syntax rather than in LaTeX syntax.
Aditya
-- next part --
A non-text attachment
in ConTeXt syntax rather than in LaTeX syntax.
Aditya
-- next part --
A non-text attachment was scrubbed...
Name: sympy.tex
Type: application/x-tex
Size: 916 bytes
Desc:
URL:
http://www.ntg.nl/pipermail/ntg-context/attachments/20130223/f57ddc6c/attachment.tex
minimal in attachment.
PS: excuse me for my approximate language, I don't speak english…
Pierre Bovet
arranging.tex
Description: Binary data
___
If your question is of interest to others as well, please add an entry
\startquotation
This is would be interesting.
\stopquotation
\stoptext
attachment: quote-block-example.png___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg
Hi,
I’m looking for something like the example attatched below, braces open
left/right, collecting in hiearchies the entries with the capability of
vertical lettering.
Is there a mechanism in ConTeXt or third party module?
attachment
=on,
align={flushleft,nothyphenated,verytolerant}]
{{\kap\kerncharacters[.5]\tfc#2}}
\NR
\stoptable
}
\setuphead
[chapter]
[command=\dmaketitle]
%numberstyle=\dfont
\starttext
\chapter{Introduction to thesis}
\dmaketitle{1}{Introduction to thesis}
\stoptext
attachment: Screenshot
hi, Wolfgang
thank you!
The source in attachment!
PengCZ
2013/1/19 Wolfgang Schuster wolfgang.schus...@gmail.com
Am 19.01.2013 um 12:27 schrieb 土卜皿 pengcz.n...@gmail.com:
hi, all
I am writing a doc with context in Chinese, I found that the distance
between two Chinese words
Am 19.01.2013 um 15:56 schrieb 土卜皿 pengcz.n...@gmail.com:
hi, Wolfgang
thank you!
The source in attachment!
I would try to avoid mixing simplefonts and zhfonts because it could lead to
problems.
You can now try a simplefonts only solution and look if the weird spacing
disappears
Am 19.01.2013 um 15:56 schrieb 土卜皿 pengcz.n...@gmail.com:
hi, Wolfgang
thank you!
The source in attachment!
I would try to avoid mixing simplefonts and zhfonts because it could lead
to problems.
You can now try a simplefonts only solution and look if the weird spacing
disappears
}}
\stoptexdefinition
Marco
-- next part --
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: Digital signature
URL:
http://www.ntg.nl/pipermail/ntg-context/attachments/20130112/eae9e4aa/attachment-0001.pgp
in file Pres2.tex
although the file contains only 7 lines...?
Thanks for your help
Thomas Meigen
**
Attachment 1: log-file of successful presentation Pres1.tex
=no,
alternative=command,
command=\FancyEntry]
\setuptexttexts[margin][\vbox{\placelist[MyTopics]}][]
\starttext
\Topic[First]
First Topic
\page
\Topic[Second]
Second Topic
\stoptext
but I can not get the right pdf, please check the attachment!
context version: 2013.01.08 01:19
LuaTeX
in the image metadata, too. Is
the image file something you can share? If so, perhaps you could share
it on the list as an attachment (this mailing list allows
attachments), so we could have a go at getting it to work ourselves.
Cheers,
Sietse
output.
That does suggest it might be something in the image metadata, too. Is
the image file something you can share? If so, perhaps you could share
it on the list as an attachment (this mailing list allows
attachments), so we could have a go at getting it to work ourselves.
Cheers,
Sietse
metadata, too. Is
the image file something you can share? If so, perhaps you could share
it on the list as an attachment (this mailing list allows
attachments), so we could have a go at getting it to work ourselves.
Cheers,
Sietse
Am 15.11.2012 20:32, schrieb ntg-context-requ...@ntg.nl:
Take a look at the attachment for a example which use the latest version of the
annotation module (a module to create customized commands/environments).
Wolfgang
-- next part --
A non-text attachment was scrubbed
301 - 400 of 901 matches
Mail list logo
