On Thu, Jun 23, 2011 at 07:58:38AM +0200, Mojca Miklavec wrote:
On Thu, Jun 23, 2011 at 06:36, Khaled Hosny wrote:
I don't know to what extent the support is missing (how complex are
the typographical rules apart from just sticking the letters close
enough together and use ligatures), but
Hello,
success finally!
I had to delete *manually* the cache directory - (in my case, WinXP):
c:\ConTeXt\tex\texmf-cache\luatex-cache\context\2448223e6631addb83df348d74153606\
and than to call mtxrun --generate.
Best regards,
Lukas
Am 22.06.2011 23:49, schrieb Jaroslav Hajtmar:
Hello Yoraxe,
what about this:
\setupbibtex[database=bib]
\starttext
Citation: \cite[booklet]
\placepublications[criterium=all]
\stoptext
Just Citation: [[error 2]]
(attached)
Dne 22.6.2011 23:10, yoraxe napsal(a):
Hey,
Typing
Am 23.06.2011 00:09, schrieb Pontus Lurcock:
On Wed 22 Jun 2011, yoraxe wrote:
Thanks for the information. I really didn't know that. But
unfortunately this does not change anything.
Strange, works here for me (ConTeXt MkIV version: 2011.02.25 22:03,
Some weeks ago this also has worked
On 23-6-2011 8:06, Khaled Hosny wrote:
On Thu, Jun 23, 2011 at 07:58:38AM +0200, Mojca Miklavec wrote:
On Thu, Jun 23, 2011 at 06:36, Khaled Hosny wrote:
I don't know to what extent the support is missing (how complex are
the typographical rules apart from just sticking the letters close
On 23-6-2011 6:32, Jeong Dalyoung wrote:
Hi all,
I got the reason why the pictures locate in different position.
rotation causes the problem.
I defined domino as follows.
It is not the exact code but just show the form of the codes.
def domino (a, b, c, d )
save pic;
Hello,
please look at the following minimal example:
\definehead[chapterMiddle][chapter]
\setuphead[chapterMiddle][align=middle]
\definehead[sectionMiddle][section] % Try to comment this line!
\definecombinedlist[content][part,chapter,chapterMiddle]
It is strange.
I compiled it by
1) latest minimals
2) ConTeXt (MKIV) in TeXLive 2010.
(LuaTeX, Version beta-0.60.2-2010071421 (Web2C 2010) (rev 3736)
ConTeXt ver: 2010.05.24 13:05 MKIV fmt: 2010.9.21 int: english/english
and in both cases it was fine... (I really tried)
Jaroslav
Dne
Am 23.06.2011 11:37, schrieb Jaroslav Hajtmar:
It is strange.
I compiled it by
1) latest minimals
2) ConTeXt (MKIV) in TeXLive 2010.
(LuaTeX, Version beta-0.60.2-2010071421 (Web2C 2010) (rev 3736)
ConTeXt ver: 2010.05.24 13:05 MKIV fmt: 2010.9.21 int: english/english
and in both
I dont know now. I dont have much experience with it. I would try if it
can not be a problem as the encoding (UTF8) or try to add at the
beginning of \usemodule [bib]. Or try to update bib module (ie
http://www.mail-archive.com/ntg-context @ ntg.nl/msg38443.html) etc..
Unfortunately I do not
... A simplified piece of code - the result still depends on presence of
\definehead[sectionMiddle][section]:
\definehead[chapterMiddle][chapter]
\setuphead[chapterMiddle][align=middle]
\definehead[sectionMiddle][section] % Try to comment this line!
I can't seem to set a background on one of my paragraphs. I'm using:
\definetextbackground[intro][backgroundcolor=gray,
location=text,color=blue]
along with
\starttextbackground[intro]
paragraph
\stopbackgroundtext
in the body of the document.
I got the impression from one of the
On Thu, Jun 23, 2011 at 1:35 PM, H. Hodges freelancer.hod...@gmail.com wrote:
I can't seem to set a background on one of my paragraphs. I'm using:
\definetextbackground[intro][backgroundcolor=gray,
location=text,color=blue]
along with
\starttextbackground[intro]
paragraph
luigi scarso luigi.scarso at gmail.com writes:
\stoptextbackground
(btw, not checked)
I have \stoptextbackground in the document. I mistyped it in my question.
___
If your question is of interest to others as
I was planning to spend some time on at least typesetting Devanagari with
ConTeXt in the
foreseenable future. I'll come back with this in a couple of weeks.
Greetings,
Daniel Stender
On 23.06.2011 09:38, Hans Hagen wrote:
On 23-6-2011 8:06, Khaled Hosny wrote:
On Thu, Jun 23, 2011 at
On Thu, Jun 23, 2011 at 1:56 PM, H. Hodges freelancer.hod...@gmail.com wrote:
this is ok (mkiv)
\definetextbackground[intro][backgroundcolor=gray,
location=text,color=blue]
\starttext
\starttextbackground[intro]
\input knuth
\stoptextbackground
\stoptext
--
luigi
On Thu, Jun 23, 2011 at 2:06 PM, luigi scarso luigi.sca...@gmail.com wrote:
also with mkii, with \setupcolors[state=start]
\setupcolors[state=start]
\definetextbackground[intro][backgroundcolor=gray,
location=text,color=blue]
\starttext
\starttextbackground[intro]
\input knuth
Am 23.06.2011 um 11:03 schrieb Procházka Lukáš Ing. - Pontex s. r. o.:
Its goal is to define \(start/stop)TitlePage command in which heads will be
centred (although they are not mid-aligned by default).
(I don't know if my approach is the best - I'm using \chapterMiddle instead
of
luigi scarso luigi.scarso at gmail.com writes:
On Thu, Jun 23, 2011 at 2:06 PM, luigi scarso luigi.scarso at gmail.com
wrote:
also with mkii, with \setupcolors[state=start]
\setupcolors[state=start]
\definetextbackground[intro][backgroundcolor=gray,
location=text,color=blue]
Don’t misuse headings for your titlepage. As a titlepage is something special
you can use \midaligned, \definedfont etc. to format it, e.g.
Thanks for the answer, but -
- to describe better my situation:
I'm not creating a typical book, but a special kind of report, with many code
generated
On Thu, Jun 23, 2011 at 2:51 PM, H. Hodges freelancer.hod...@gmail.com wrote:
luigi scarso luigi.scarso at gmail.com writes:
On Thu, Jun 23, 2011 at 2:06 PM, luigi scarso luigi.scarso at gmail.com
wrote:
also with mkii, with \setupcolors[state=start]
\setupcolors[state=start]
I have Texlive installed on Ubuntu Linux x64. The version is listed as
2009-11.
According to http://wiki.contextgarden.net/Running_Mark_IV#Introduction, with
this version, I should be able to compile by typing
context filename.tex
at the command line, but I get the error
MTXrun | forcing cache
On Thu, Jun 23, 2011 at 3:47 PM, H. Hodges freelancer.hod...@gmail.com wrote:
I have Texlive installed on Ubuntu Linux x64. The version is listed as
2009-11.
According to http://wiki.contextgarden.net/Running_Mark_IV#Introduction, with
this version, I should be able to compile by typing
luigi scarso luigi.scarso at gmail.com writes:
Are you using minimals (recommended) or not ?
for mkiv
$ context test.tex
for mkii
$ texexec test.tex
or
$texmfstart texexec test
I don't know what minimals means. I've tried both of the commands you listed
for mkii; neither gave me a
Am 27.05.2011 10:53, schrieb Paul Menzel:
Am Montag, den 02.05.2011, 17:30 +0200 schrieb Paul Menzel:
Am Sonntag, den 01.05.2011, 15:09 -0400 schrieb Aditya Mahajan:
On Sun, 1 May 2011, Aditya Mahajan wrote:
On Sun, 1 May 2011, Peter Münster wrote:
So, whatever the original enviroment is,
On Thu, Jun 23, 2011 at 4:21 PM, H. Hodges freelancer.hod...@gmail.com wrote:
luigi scarso luigi.scarso at gmail.com writes:
Are you using minimals (recommended) or not ?
for mkiv
$ context test.tex
for mkii
$ texexec test.tex
or
$texmfstart texexec test
I don't know what minimals
2011/6/23 H. Hodges freelancer.hod...@gmail.com:
I don't know what minimals means. I've tried both of the commands you listed
http://lmgtfy.com/?q=context+minimalsl=1
Best
Martin
___
If your question is of
Hi,
say, I want to design the TOC. Now I would write:
\setuplist[LevelFour] [margin=1.20cm,width=0.5cm,...]
\setuplist[LevelFive] [margin=1.70cm,width=0.5cm,]
But is there some clever command that makes a calculation like this:
\setuplist[LevelFour] [margin=1.20cm,width=0.5cm,...]
luigi scarso luigi.scarso at gmail.com writes:
ok, this example must work under mkii. If not, can be a bug.
Still no background. I downloaded context from an Ubuntu repository, so I'm not
sure if it is a minimal package or not. Since it installed things on my path, I
assume that it isn't.
On Thu, Jun 23, 2011 at 4:52 PM, H. Hodges freelancer.hod...@gmail.com wrote:
luigi scarso luigi.scarso at gmail.com writes:
ok, this example must work under mkii. If not, can be a bug.
Still no background.
can you post the log ?
I downloaded context from an Ubuntu repository, so I'm not
luigi scarso luigi.scarso at gmail.com writes:
can you post the log ?
Can be: if
$context
works than you have a mkiv.
The context command doesn't work at the command line. Here is the log; I'm not
sure how much of it is useful.
This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live
On Thu, Jun 23, 2011 at 5:25 PM, H. Hodges freelancer.hod...@gmail.com wrote:
runsystem(mpost -progname=metafun -mem=metafun
untitled-5-mpgraph)...disabled.
^^^
open a shell and
$ export shell_escape=true
then try again.
With shell_escape=true external commands are enabled, so by default
On Thu, Jun 23, 2011 at 15:47, H. Hodges wrote:
I have Texlive installed on Ubuntu Linux x64. The version is listed as
2009-11.
According to http://wiki.contextgarden.net/Running_Mark_IV#Introduction, with
this version, I should be able to compile by typing
TeX Live 2009 is the worst
Am 23.06.2011 um 00:01 schrieb Hans Hagen:
japanese is not yet defined; we need entries in scrp-ini and scrp-cjk for
that, character categories and initializations and we need japanese expertise
for that
Japanese is supported (it’s only a few extra chars for the chinese code) and
worked
Am 23.06.2011 um 16:49 schrieb Steffen Wolfrum:
Hi,
say, I want to design the TOC. Now I would write:
\setuplist[LevelFour] [margin=1.20cm,width=0.5cm,...]
\setuplist[LevelFive] [margin=1.70cm,width=0.5cm,]
But is there some clever command that makes a calculation like this:
On Thu, 23 Jun 2011, yoraxe wrote:
How can I use math-mode in such a table? Using $a_b$ it just prints
$a_b$ instead of identifying this as a math-input.
I'm using pandoc 1.8.1.1 and context 2011.06.19.
Can you give a complete minimal example?
Aditya
On Thu, 23 Jun 2011, H. Hodges wrote:
luigi scarso luigi.scarso at gmail.com writes:
ok, this example must work under mkii. If not, can be a bug.
Still no background. I downloaded context from an Ubuntu repository, so I'm not
sure if it is a minimal package or not. Since it installed
On 23-6-2011 6:08, Wolfgang Schuster wrote:
Variant 1:
Variant 2:
Nice examples for the wiki!
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The
On 06/24/2011 12:39 AM, ntg-context-requ...@ntg.nl wrote:
japanese is not yet defined; we need entries in scrp-ini and scrp-cjk for
that, character categories and initializations and we need japanese
expertise for that
Japanese is supported (it?s only a few extra chars for the chinese
Am 23.06.2011 um 19:49 schrieb Jaroslav Hajtmar:
Hello Wolfgang.
I know that my question is a little off this topic, but:
Is there any possibility change due this method affect appearance list typed
using \placecontent (the gap between list items, alignment, etc.)?
If I knew how to do it,
Am 23.06.2011 um 20:23 schrieb S Barmeier:
Japanese was working more or less a few months ago.
It was working till February (I tested it with a old beta) and
also when i comment the mentioned but i have no clue what’s the
purpose of the line.
I guess vertical
typesetting is a little more
Hello Wolfgang.
I know that my question is a little off this topic, but:
Is there any possibility change due this method affect appearance list
typed using \placecontent (the gap between list items, alignment, etc.)?
If I knew how to do it, maybe I found how to change appearance list of
On 23-6-2011 8:52, Wolfgang Schuster wrote:
Am 23.06.2011 um 20:23 schrieb S Barmeier:
Japanese was working more or less a few months ago.
It was working till February (I tested it with a old beta) and
also when i comment the mentioned but i have no clue what’s the
purpose of the line.
I
Hello ConTeXist,
As is known, the layout of a list (of content) is determined by the
values of alternative, margin, width
and distance. Required values can be changed via commands \setuplist or
\setupcombinedlist.
Can somehow influence the horizontal arrangement of items in lists typed
Am 23.06.2011 18:30, schrieb Aditya Mahajan:
On Thu, 23 Jun 2011, yoraxe wrote:
How can I use math-mode in such a table? Using $a_b$ it just prints
$a_b$ instead of identifying this as a math-input.
I'm using pandoc 1.8.1.1 and context 2011.06.19.
Can you give a complete minimal example?
Am 23.06.2011 12:09, schrieb Jaroslav Hajtmar:
I dont know now. I dont have much experience with it. I would try if it
can not be a problem as the encoding (UTF8) or try to add at the
beginning of \usemodule [bib].
Or try to update bib module (ie
http://www.mail-archive.com/ntg-context @
I am typesetting a lot of small Metapost pictures, each on a separate page:
from a few hundred to more than thousand. ConTeXt will pass some three times
over the input, but I need just the bare Metapost pictures. My guess is, that
one pass over the input will be sufficient to provide a view to
On 23-6-2011 10:16, yoraxe wrote:
Strange is, that it worked a month ago.
afaik nothing really changes with the bibliographic system this month
Hans
-
Hans Hagen | PRAGMA ADE
On 23-6-2011 10:23, Hans van der Meer wrote:
I am typesetting a lot of small Metapost pictures, each on a separate page:
from a few hundred to more than thousand. ConTeXt will pass some three times
over the input, but I need just the bare Metapost pictures. My guess is, that
one pass over the
Am 23.06.2011 21:59, schrieb yoraxe:
Am 23.06.2011 18:30, schrieb Aditya Mahajan:
On Thu, 23 Jun 2011, yoraxe wrote:
How can I use math-mode in such a table? Using $a_b$ it just prints
$a_b$ instead of identifying this as a math-input.
I'm using pandoc 1.8.1.1 and context 2011.06.19.
Can
Am 23.06.2011 um 21:11 schrieb Hans Hagen:
On 23-6-2011 8:52, Wolfgang Schuster wrote:
Am 23.06.2011 um 20:23 schrieb S Barmeier:
I guess vertical typesetting is a little more involved, but as far as
horizontal
typesetting goes, most of the spacing is coded into the font already
On 23-6-2011 11:23, Wolfgang Schuster wrote:
Am 23.06.2011 um 21:11 schrieb Hans Hagen:
On 23-6-2011 8:52, Wolfgang Schuster wrote:
Am 23.06.2011 um 20:23 schrieb S Barmeier:
I guess vertical typesetting is a little more involved, but as far as horizontal
typesetting goes, most of the
On 23-6-2011 5:39, Wolfgang Schuster wrote:
Am 23.06.2011 um 00:01 schrieb Hans Hagen:
japanese is not yet defined; we need entries in scrp-ini and scrp-cjk for that,
character categories and initializations and we need japanese expertise for that
Japanese is supported (it’s only a few
On Thu, 23 Jun 2011, Hans Hagen wrote:
On 23-6-2011 10:16, yoraxe wrote:
Strange is, that it worked a month ago.
afaik nothing really changes with the bibliographic system this month
It could be a \write18 problem. Is a \jobname.bbl file generated? Last I
checked, TL2010 came with a
Am 24.06.2011 00:12, schrieb Aditya Mahajan:
On Thu, 23 Jun 2011, Hans Hagen wrote:
On 23-6-2011 10:16, yoraxe wrote:
Strange is, that it worked a month ago.
afaik nothing really changes with the bibliographic system this month
It could be a \write18 problem. Is a \jobname.bbl file
Hey.
Trying to use the interpunct · as a dot operator (normally \cdot), I
noticed, that it is not shown correctly in math mode. Since the
interpunct has different applications in different languages, in text
mode its appearance seems to be okay.
But isn't it possible to change its functionality
On Fri, 24 Jun 2011, yoraxe wrote:
Am 24.06.2011 00:12, schrieb Aditya Mahajan:
On Thu, 23 Jun 2011, Hans Hagen wrote:
On 23-6-2011 10:16, yoraxe wrote:
Strange is, that it worked a month ago.
afaik nothing really changes with the bibliographic system this month
It could be a \write18
On Fri, 24 Jun 2011, yoraxe wrote:
Hey.
Trying to use the interpunct · as a dot operator (normally \cdot), I
noticed, that it is not shown correctly in math mode. Since the
interpunct has different applications in different languages, in text
mode its appearance seems to be okay.
But isn't it
On Thu, 23 Jun 2011, yoraxe wrote:
Am 23.06.2011 18:30, schrieb Aditya Mahajan:
On Thu, 23 Jun 2011, yoraxe wrote:
How can I use math-mode in such a table? Using $a_b$ it just prints
$a_b$ instead of identifying this as a math-input.
I'm using pandoc 1.8.1.1 and context 2011.06.19.
Can
On Thu, 2011-06-23 at 14:05 +0200, Daniel Stender wrote:
I was planning to spend some time on at least typesetting Devanagari with
ConTeXt in the
foreseenable future. I'll come back with this in a couple of weeks.
Greetings,
Daniel Stender
Thanks Daniel. If you need a sample project to
On Thu, 2011-06-23 at 06:36 +0200, Khaled Hosny wrote:
ConTeXt MkIV (assuming it is what you use) has no proper support for
Devanagari or other Indic scripts. Since you need only few words, you
can produce them externally (say ConTeXt MkII with XeTeX or Inkscape)
and include the resultant PDF
Hey folks,
This code, as far as I remember, was working fine a few days ago but
now craps out with:
system begin file Source/Handbook.tex at line 1
system begin file Source/Environment at line 2
! LuaTeX
error ...text/tex/texmf-context/tex/context/base/data-env.lua:234: bad
62 matches
Mail list logo