Hello all-
I was born at 4:41 pm. They probably didn't cut the cord until another
minute had passed, though ;)
I also think the clock was running slow.
In Olds news... Got a report back from the machinist on my '77 350
project...two pistons were on the edge of being too far out of round to
Mr. Gasket makes a nice composite gasket for the intake. This works great
on stock and aftermarket olds manifolds. I do not recommend that you reuse
the turkey tray. There is ridges / bevels in the metal that are flattened
when you install them and it is not reversible. If you want to keep oil o
I second Milton. Get the poly end link kit and also spring in for a set of
poly bushings. These will NOT make your ride harsher, neither should they
increase noise.
For ease of installation, drop the car down on the wheels or lift the lower
ctrl. arm with a jack. That's how it sits all the tim
Todd -
All plates issued in New York State prior to 1972 had
the year embossed on the plates (it kept the inmates a
little busier adding this touch) to represent the year
the car was first registered. For 1966 it would have
the "19" on the left side of the plate and the "66" on
the right. When you
Gaskets only will work fine with the stock cast iron intake manifold. The
exhaust crossover doesn't need to be blocked in the intake manifold.
Milton Schick
19674 442 Cutlass
[EMAIL PROTECTED]
- Original Message -
From: "Infinite Space Systems, Inc." <[EMAIL PROTECTED]>
To:
Sent: Th
I have talked with John Kelsey and he suggested I ask
the group is it OK to use gaskets and the old turkey
tray or should I buy a new turkey tray and forget the
gaskets?
I refuse to ever use the turkey tray on any type of intake manifold and will
only use gaskets, in particular, Mr. Gasket Ult
James,
I got a new 1-1/4" front sway bar for my 1970 442 and the end link bolt
seems too short.
can't get the nut to screw on. I'm using poly bushings on it.. Should I
use the rubber?
There's 2 ways to do it. If you are reusing the stock bolts, then get a very
big "C" clamp and compress th
Vinny 62
Starfire (long gone)64 442 post coupe (sold)65 442 holiday
(my first car,long gone)65 442 post coupe (long gone)70 W31
Cutlass (long gone)77 Cutlass Supreme Brougham T-Tops
(long gone)83 98 coupe (long gone)86 442 (stolen 3 weeks
after I bought it)95 Caddy Seville SLS (
Vinny 62
Starfire (long gone)64 442 post coupe (sold)65 442 holiday
(my first car,long gone)65 442 post coupe (long gone)70 W31
Cutlass (long gone)77 Cutlass Supreme Brougham T-Tops
(long gone)83 98 coupe (long gone)86 442 (stolen 3 weeks
after I bought it)95 Caddy Seville SLS (
Chris,
Send me $40.00 and you would be left with 4.42! That would be even cooler!
Just a suggestion,
Matt
- Original Message -
From: "Christopher Witt" <[EMAIL PROTECTED]>
To:
Sent: Thursday, March 16, 2006 9:37 AM
Subject: Numbers coincidence
> ck'd my paypal balance just now
>
>
My setups are about 1 1/4" front, 1" rear. I
agree, use rubber for suspension, poly for
sway bars. Bruce Roe
16 Mar 2006 [EMAIL PROTECTED] writes:
>
>
> Hello
> IIRC when i upgraded to 1 1/4" bar in the front i had to upgrade my
> rear bar thicker to match as per the thoughts from this li
Speaking of thatone of Rob Vazzanna's kids was born very close to the
4:42 time..and if it had been me..I would have kept the bunn in the oven to
make sure the baby was delivered at that time.
Harry
HotRodHarrys.com
yep..I am crazy
00411961 all 350 exc e lh1976- 1979 discon
01609255 all 425 rh 77-79 discon
H22521449 c,k 350n rh 1979 only 306.07
H22521449 k rh1979 306.07
This is how parts screen printed the numbers out, a parts book may show m
The Olds Gods have given us a sign.
Chris is the saviour of all things Olds!
Chris is the ONE!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Christopher Witt
Sent: March 16, 2006 9:37 AM
To: oldsmobile@chebucto.ns.ca
Subject: Numbers coincidence
ck'd my
when I changed mine out, I tossed the turkey tray, and used gaskets, and
filled the heat by pass... not sure you should do that with the stock
set-up
I would do what they did form the factory... it lasted 35 plus years, they
must
know something... :-)
john orr
67 cutlass supreme 4 spd
tampa
Can anyone here offer some assistance? Respond to [EMAIL PROTECTED] if
you have any leads.
Greg Beaulieu[EMAIL PROTECTED]Dartmouth, Nova Scotia, Canada
Olds List Admin Info: http://oldslist.oldsgmail.com
-- Forwarded message --
From: Allan <[EMAIL PROTECTED]>
He
John,
The STOCK cast iron one!
Thanks
--- JOHN ORR <[EMAIL PROTECTED]> wrote:
> what kind of intake do you have on there?
>
> john orr
> 67 cutlass supreme 4 spd
> tampa fl
>
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam prot
Hey, what's that Mr. Yancy, president of OCA is always saying? "You
always meet the nicest people in an Oldsmobile."
James Hernandez
Gilbert, AZ
==
*I* got the 'most tactful' award?
I just want the buy
Hi Chris , I have obviously gotten some bad info on this item and the
description will be revised , thanks for being so tactful others opted fo a
more
rude approach , also thank you for taking the time to inlighten me
John
===
8-O
*I* got the 'most tactful' award?
KEWL.
I am t
what kind of intake do you have on there?
john orr
67 cutlass supreme 4 spd
tampa fl
After pulling my intake I made an interesting
discovery, my car does not have a valley cover like my
60's Pontiac it seems to have a turkey tray made of
aluminum or another shinny metal. I figure if I put
gaskets on the intake and leave the turkey tray as is
I would eliminate any possible leaks tha
I have used various diameter bars with various combinations of rubber, poly
and teflon bushings over the years. It is a easy way to taylor the car setup
to your paticular preference for understeer, oversteer or neutral handling.
1) Generaly a larger frront bar (no change in the rear bar) will m
Here is an article for installing them on a Buick GS. This might help.
http://www.buickperformance.com/swaybar.htm
Garth DeVries
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Greg Beaulieu
Sent: Wednesday, March 15, 2006 4:13 PM
To: oldsmobile@chebuct
ck'd my paypal balance just now
Balance:$44.42 USD
Huh. Weird.
---
Chris Witt
*the* Rocket Scientist
1303 W. Miller Rd.
Lansing MI 48911
[EMAIL PROTECTED]
Cell 517-449-0432 weekends or short weekday calls or leave message.
Home 517-882-9747 thru 10-11pm MI time most
In a message dated 3/15/2006 10:39:56 P.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
I have
pulled a few hail dents out on HOT days bypouring a bucket of ice water on
them.
Geez, When people tell me that the steel they use today is the same
thickness as the old cars, it makes yo
25 matches
Mail list logo