Re: [OmniOS-discuss] Continuing hung-zone problems

2017-04-03 Thread Dan McDonald
> On Apr 3, 2017, at 3:38 PM, Bob Friesenhahn > wrote: > > It does not seem that you obtained the same initial error message ("failed to > open console master: Device busy") that I always do. When it fails, I *DO* see this. Apr 3 15:22:16 bloody

Re: [OmniOS-discuss] Continuing hung-zone problems

2017-04-03 Thread Dan McDonald
> On Apr 3, 2017, at 3:18 PM, Dan McDonald wrote: > > AND THINGS GET WEIRDER. > > After the failure I documented earlier, I went off to do something else. > When I came back, the zsched process was gone, and the zone appeared to be > properly shut down. > > So I booted

Re: [OmniOS-discuss] Continuing hung-zone problems

2017-04-03 Thread Dan McDonald
> On Apr 3, 2017, at 2:59 PM, Dan McDonald wrote: > > Okay. I will be diving into this now to see WTF happened. I'm sorry for not > paying closer attention to this sooner. AND THINGS GET WEIRDER. After the failure I documented earlier, I went off to do something else.

Re: [OmniOS-discuss] Continuing hung-zone problems

2017-04-03 Thread Dan McDonald
> On Apr 3, 2017, at 2:11 PM, Bob Friesenhahn > wrote: > > The problem is definintely with zone 'shutdown'. I have never seen it happen > with 'reboot' or 'halt'. Which does go through the inittab things. I've found something. I can reproduce this on bloody

Re: [OmniOS-discuss] Continuing hung-zone problems

2017-04-03 Thread Bob Friesenhahn
On Mon, 3 Apr 2017, Dan McDonald wrote: All of my zones (some of which do not use NFS and have almost every network service disabled) on my two OmniOS systems are equally plagued with this issue. I know that I am not alone since others have reported that this is happening to them. I've

Re: [OmniOS-discuss] Continuing hung-zone problems

2017-04-03 Thread Dan McDonald
> On Apr 3, 2017, at 1:40 PM, Bob Friesenhahn > wrote: > > The common theme is always the first message "failed to open console master: > Device busy". The failure to unmount filesystems is new to me. That could be something from the LX code, but I'm not seeing

Re: [OmniOS-discuss] Continuing hung-zone problems

2017-04-03 Thread Bob Friesenhahn
On Mon, 3 Apr 2017, Dan McDonald wrote: If you have a shell available, you should inspect the available processes to see what all is stuck in where. I will try to find some time for such activities. Apr 2 17:50:13 velma zoneadmd[653]: [ID 702911 daemon.error] [zone 'swdev'] failed to

Re: [OmniOS-discuss] Continuing hung-zone problems

2017-04-03 Thread Dan McDonald
> On Apr 2, 2017, at 7:07 PM, Bob Friesenhahn > wrote: > > Previously I reported a problem (in the 040 timeframe) in that zones are > hanging when being shut down. Problems continue on that system. Today I am > seeing the same issue with a different OmniOS