Re: [OmniOS-discuss] new supermicro server

2017-03-08 Thread Linda Kateley
jvm.de> wrote: - Ursprüngliche Mail - Von: "Dan McDonald" <dan...@omniti.com> An: "Geoff Nordli" <geo...@gnaa.net> CC: "omnios-discuss" <omnios-discuss@lists.omniti.com> Gesendet: Mittwoch, 8. März 2017 07:44:30 Betreff: Re: [OmniOS-discuss] ne

Re: [OmniOS-discuss] new supermicro server

2017-03-08 Thread Bob Friesenhahn
On Wed, 8 Mar 2017, kevin.s...@colostate.edu wrote: It looks like this MB may have an onboard SAS controller. If you're using that, there may be a similar option somewhere in the system BIOS. I am using a plug-in HBA and direct-connect chassis with 16 channels. I think it is a

Re: [OmniOS-discuss] new supermicro server

2017-03-08 Thread Schweiss, Chip
On Wed, Mar 8, 2017 at 8:36 AM, Bob Friesenhahn < bfrie...@simple.dallas.tx.us> wrote: > > > Perhaps there is a way to tell the HBA BIOS to not advertize the SAS > drives which are not needed for booting? In the HBA BIOS configuration, set the HBA to disabled. OmniOS will still see the HBA and

Re: [OmniOS-discuss] new supermicro server

2017-03-08 Thread Kevin . Swab
We haven't used this particular system, but we had the same problem with SuperMicro Gen 9 motherboards. The solution for us on those systems was to disable BIOS loading for the particular PCI slot the SAS HBA was installed in. This was a system BIOS setting, rather than an HBA BIOS setting. It

Re: [OmniOS-discuss] new supermicro server

2017-03-08 Thread Linda Kateley
woch, 8. März 2017 07:44:30 Betreff: Re: [OmniOS-discuss] new supermicro server You didn't mention anything in the original note about NVMe, and neither did the spec sheet. NVMe 1.0 and 1.1 should work on 020 and later OmniOS. Hang out on the illumos developers list to see the latest on that fron

Re: [OmniOS-discuss] new supermicro server

2017-03-08 Thread Linda Kateley
I have been using the 6037R-E1R16L for several of my builds for archive, but the 6038 is also a nice frame. It always depends on what you are doing with it. lk On 3/7/17 7:21 PM, Dan McDonald wrote: On Mar 7, 2017, at 8:16 PM, Geoff Nordli wrote: Hi. I am looking at

Re: [OmniOS-discuss] new supermicro server

2017-03-08 Thread Bob Friesenhahn
On Tue, 7 Mar 2017, Geoff Nordli wrote: Hi. I am looking at ordering a new 3U supermicro server. as an all-in one. I have been using these recently: https://www.supermicro.com/products/system/3U/6038/SSG-6038R-E1CR16L.cfm It has the LSI 3008 HBA in IT mode. I have one of these. It

Re: [OmniOS-discuss] new supermicro server

2017-03-07 Thread Ergi Thanasko
jvm.de> wrote: > > > > - Ursprüngliche Mail - >> Von: "Dan McDonald" <dan...@omniti.com> >> An: "Geoff Nordli" <geo...@gnaa.net> >> CC: "omnios-discuss" <omnios-discuss@lists.omniti.com> >> Gesendet: Mitt

Re: [OmniOS-discuss] new supermicro server

2017-03-07 Thread Stephan Budach
- Ursprüngliche Mail - > Von: "Dan McDonald" <dan...@omniti.com> > An: "Geoff Nordli" <geo...@gnaa.net> > CC: "omnios-discuss" <omnios-discuss@lists.omniti.com> > Gesendet: Mittwoch, 8. März 2017 07:44:30 > Betreff: Re:

Re: [OmniOS-discuss] new supermicro server

2017-03-07 Thread Dan McDonald
You didn't mention anything in the original note about NVMe, and neither did the spec sheet. NVMe 1.0 and 1.1 should work on 020 and later OmniOS. Hang out on the illumos developers list to see the latest on that front. Dan Sent from my iPhone (typos, autocorrect, and all)

Re: [OmniOS-discuss] new supermicro server

2017-03-07 Thread Geoff Nordli
On 2017-03-07 09:35 PM, Stephan Budach wrote: - Ursprüngliche Mail - Von: "Dan McDonald" <dan...@omniti.com> An: "Geoff Nordli" <geo...@gnaa.net> CC: "omnios-discuss" <omnios-discuss@lists.omniti.com> Gesendet: Mittwoch, 8. März

Re: [OmniOS-discuss] new supermicro server

2017-03-07 Thread Stephan Budach
- Ursprüngliche Mail - > Von: "Dan McDonald" <dan...@omniti.com> > An: "Geoff Nordli" <geo...@gnaa.net> > CC: "omnios-discuss" <omnios-discuss@lists.omniti.com> > Gesendet: Mittwoch, 8. März 2017 02:21:20 > Betreff: Re: