[OmniOS-discuss] 4k sectors on a kvm guest

hi, before running a real hardware omnios host I am learning how to use it in a kvm vm running on centos. The disk performance is quite poor, this is partly due to omnios not using virtio hard drives but ide drives. But I think the root zpool is not properly aligned either: root@testomnios:~#

[OmniOS-discuss] trouble mirroring the zpool rpool

hi, I have installed omnios with a 32GiB usb stick as the rpool. I have two of those sticks, so I would like to mirror them. rmformat tells me this about the usb sticks: # rmformat Looking for devices... 1. Logical Node: /dev/rdsk/c14t0d0p0 Physical Node:

Re: [OmniOS-discuss] trouble mirroring the zpool rpool

hi, fwiw, it worked: # zpool status rpool pool: rpool state: ONLINE scan: resilvered 7.14G in 0h26m with 0 errors on Mon May 6 20:59:19 2013 config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 mirror-0 ONLINE 0

Re: [OmniOS-discuss] nfsv4 acls wtf moment

hi Siggi, On Fri, May 10, 2013 at 3:47 PM, Sigbjorn Lie sigbj...@nixtra.com wrote: Hi, Did you set aclmode to passthrough too? no but I just tried it and the linux nfsv4 client still ignores the inheritance: # zfs get all tank/testshare | grep acl tank/testshare aclmode

Re: [OmniOS-discuss] nfsv4 acls wtf moment

On Sat, May 11, 2013 at 10:35 PM, Paul B. Henson hen...@acm.org wrote: On Sat, May 11, 2013 at 09:12:43AM +0200, Natxo Asenjo wrote: I have straced the cp -r command with discard and restricted aclmode settings (see attachments). open(/net/zfstank.ipa.asenjo.nx/tank/testshare/bin

[OmniOS-discuss] server spontanously reboots on cifs action

hi, today twice I have experimented this while removing a (largish) folder infrastructure with plenty of pictures. I was removing the folder first with the windows explorer and then with the command rd /s /q in a cmd.exe prompt. This does not happen when removing the same folder directly on the

Re: [OmniOS-discuss] nfsv4 acls wtf moment

On Wed, May 15, 2013 at 11:47 PM, Paul B. Henson hen...@acm.org wrote: On 5/12/2013 1:21 PM, Natxo Asenjo wrote: mm, when using scp it bypasses the acl as well ..., grrr. Even with aclmode=restricted? strangely enough, on one share yes, the other no. The difference is the share root dir

[OmniOS-discuss] sudo ldap

hi, has anyone pointers on how to configure this in omnios? -- Groeten, natxo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss

[OmniOS-discuss] upgrade nearly perfect

hi, I just followed the instructions on the wiki http://omnios.omniti.com/wiki.php/Upgrade_r151006_r151008 and everything worked fine, except now is java broken: # /usr/java/bin/java -version ld.so.1: java: fatal: libjli.so: open failed: No such file or directory Killed # ldd /usr/bin/java

Re: [OmniOS-discuss] upgrade nearly perfect

-- Groeten, natxo On Fri, Dec 13, 2013 at 1:41 PM, Chavdar Ivanov c...@outlook.com wrote: -Original Message- From: OmniOS-discuss [mailto:omnios-discuss-boun...@lists.omniti.com] On Behalf Of Natxo Asenjo Sent: 13 December 2013 12:06 To: omnios-discuss@lists.omniti.com Subject

Re: [OmniOS-discuss] upgrade nearly perfect

On Fri, Dec 13, 2013 at 4:29 PM, John D Groenveld jdg...@elvis.arl.psu.edu wrote: In message cahbejzw5o2s3w5f42u1yt+av8x1cknq4szadglvm21zmgyp...@mail.gmail.com , Natxo Asenjo writes: Is this the right one? How can I reinstall it or verify it is correctly installed? Looks like OmniTI's /usr

[OmniOS-discuss] zoneadm -z zone attach -u fails

hi, Following the update I needed to update my only non-global zone as well but this is the result: # /usr/sbin/zoneadm -z zone1 attach -u Log File: /var/tmp/zone1.attach_log.X6ai9c Attach Path: /tank/zones/zone1/root Attach ZFS Dataset: tank/zones/zone1/ROOT/zbe-1

Re: [OmniOS-discuss] SSH over HTTPS

On Mon, Dec 16, 2013 at 8:46 PM, Michael Mounteney gat...@landcroft.co.uk wrote: Hello, to get around super-tight restrictions in my workplace, I'm looking for an SSH over HTTPS solution. My home server runs OmniOS (of course) and my workplace is a M$ shop through and through. Running sshd

Re: [OmniOS-discuss] SSH over HTTPS

or maybe this: http://en.wikipedia.org/wiki/Web-based_SSH -- Groeten, natxo On Tue, Dec 17, 2013 at 9:57 AM, Natxo Asenjo natxo.ase...@gmail.com wrote: On Mon, Dec 16, 2013 at 8:46 PM, Michael Mounteney gat...@landcroft.co.uk wrote: Hello, to get around super-tight restrictions in my

Re: [OmniOS-discuss] zoneadm -z zone attach -u fails

On Fri, Dec 13, 2013 at 5:26 PM, Chris Nehren cnehren+omnios-disc...@omniti.com wrote: On Fri, Dec 13, 2013 at 16:52:31 +0100, Natxo Asenjo wrote: hi, Following the update I needed to update my only non-global zone as well but this is the result: # /usr/sbin/zoneadm -z zone1 attach -u Log

Re: [OmniOS-discuss] software compilation errors

-- Groeten, natxo On Sat, Feb 15, 2014 at 8:55 PM, Tim Rice t...@multitalents.net wrote: On Sat, 15 Feb 2014, Natxo Asenjo wrote: checking the C compiler (cc -fPIC) does not compile code properly *** Error code 1 make: Fatal error: Command failed for target `discount/libmarkdown.a

Re: [OmniOS-discuss] software compilation errors

On Sat, Feb 15, 2014 at 11:51 PM, Tim Rice t...@multitalents.net wrote: | On Sat, 15 Feb 2014, Natxo Asenjo wrote: | | checking the C compiler (cc -fPIC) does not compile code properly I should have caught this last time. The OmniOS gcc packages do

Re: [OmniOS-discuss] compiling mediatomb #error non-amd64 code depends on amd64 privileged header!

, and all) On May 11, 2014, at 3:00 PM, Natxo Asenjo natxo.ase...@gmail.com wrote: hi, trying to use my home omnios server for streaming media I get this error when making mediatomb: g++ -DHAVE_CONFIG_H -I. -I.. -I../tombupnp/upnp/inc-I../src -I../tombupnp/ixml/inc -I

[OmniOS-discuss] restore zones after crash

hi, the rpool of my home system (on 2 mirrored usb drives ) went first degraded and during the resilver operation the second stick died as well. So no more usb experiments for me, too unreliable and slow to resilver. The plus side of things, restoring the system is very easy, just reinstall

Re: [OmniOS-discuss] restore zones after crash

Hi Ian, On Sun, Jun 8, 2014 at 10:30 PM, Ian Collins i...@ianshome.com wrote: Natxo Asenjo wrote: But how do I reimport the zones I had? I have the data on the same data pool, but I do not have any config files (obviously, no other backups). Assuming your zone's root filesystems

Re: [OmniOS-discuss] restore zones after crash

On Mon, Jun 9, 2014 at 12:04 AM, Ian Collins i...@ianshome.com wrote: Natxo Asenjo wrote: On Sun, Jun 8, 2014 at 11:36 PM, Ian Collins i...@ianshome.com mailto: i...@ianshome.com wrote: No, I was referring to zoneadm -z zone1 attach. Use create -b in the config and then attach

Re: [OmniOS-discuss] restore zones after crash

On Mon, Jun 9, 2014 at 9:26 AM, Ian Collins i...@ianshome.com wrote: You could try setting the mountpoint of tank/zones/zone1/ROOT/zbe-5 (assuming that was the last version use had mounted) to /tank/zones/zone1/root. zfs set mountpoint=/tank/zones/zone1/root tank/zones/zone1/ROOT/zbe-5 #

Re: [OmniOS-discuss] rpool mirroring alignment problem

On Wed, Jun 11, 2014 at 7:43 PM, Natxo Asenjo natxo.ase...@gmail.com wrote: On Wed, Jun 11, 2014 at 7:32 PM, Dale Ghent da...@omniti.com wrote: On Jun 11, 2014, at 1:01 PM, Natxo Asenjo natxo.ase...@gmail.com wrote: # zpool attach -f rpool c4t13d1s0 c4t14d1s0 cannot attach c4t14d1s0

Re: [OmniOS-discuss] rpool mirroring alignment problem

On Wed, Jun 11, 2014 at 8:12 PM, Paul B. Henson hen...@acm.org wrote: On Wed, Jun 11, 2014 at 07:01:01PM +0200, Natxo Asenjo wrote: 1. c4t13d1 ATA-WDCWD1600BJKT-7-1A11 cyl 19454 alt 2 hd 255 sec 63 /pci@0,0/pci1022,9603@2/pci1014,3b1@0/sd@d,1 2. c4t14d1 ATA

[OmniOS-discuss] trouble building DBD::mysql (perl)

hi, I have installed built perl 5.20 using perlbrew and gcc-4.8.1. # perl -v This is perl 5, version 20, subversion 0 (v5.20.0) built for i86pc-solaris-thread-multi- 64int I am using database/mysql-56 from the uulm.mawi repository, which keeps its libraries/include files in

Re: [OmniOS-discuss] trouble building DBD::mysql (perl)

Hi John, On Mon, Jun 16, 2014 at 7:57 PM, John D Groenveld jdg...@elvis.arl.psu.edu wrote: In message cahbejzxp2e+ubav6forfsdmiuk_f1ahn8bvf9py1qokzdv5...@mail.gmail.com , Natxo Asenjo writes: # perl Makefile.PL --mysql_config=/usr/local/mysql/5.6/bin/mysql_config --cflags=-m32 [snipped

Re: [OmniOS-discuss] trouble building DBD::mysql (perl)

Hi Dan, On Mon, Jun 16, 2014 at 7:53 PM, Dan McDonald dan...@omniti.com wrote: On Jun 16, 2014, at 1:39 PM, Natxo Asenjo natxo.ase...@gmail.com wrote: gcc -c -I/opt/perl5/perls/perl-5.20.0/lib/site_perl/5.20.0/i86pc-solaris-thread-multi-64int/auto/DBI -m32 -DDBD_MYSQL_WITH_SSL

Re: [OmniOS-discuss] trouble building DBD::mysql (perl)

hi John, On Mon, Jun 16, 2014 at 10:16 PM, John D Groenveld jdg...@elvis.arl.psu.edu wrote: In message cahbejzx7hyzdseofnzpyob9l+e0rh3y37suvtgzd+coyp0o...@mail.gmail.com , Natxo Asenjo writes: bits, so it failed again. So now I tried with the system perl and it worked ;-) RT's make

Re: [OmniOS-discuss] trouble building DBD::mysql (perl)

hi, following on this saga, with perlbrew I got it installed but: # perl -MDBD::mysql -e 1 Can't load '/opt/perl5//perls/perl-5.20.0/lib/site_perl/5.20.0/i86pc-solaris-thread-multi-64/auto/DBD/mysql/mysql.so' for module DBD::mysql: ld.so.1: perl: fatal: relocation error: file

Re: [OmniOS-discuss] trouble building DBD::mysql (perl)

On Tue, Jun 17, 2014 at 8:17 PM, Natxo Asenjo natxo.ase...@gmail.com wrote: hi, following on this saga, with perlbrew I got it installed but: # perl -MDBD::mysql -e 1 Can't load '/opt/perl5//perls/perl-5.20.0/lib/site_perl/5.20.0/i86pc-solaris-thread-multi-64/auto/DBD/mysql/mysql.so

Re: [OmniOS-discuss] Help setting up a boot server

On Tue, Jun 24, 2014 at 10:44 AM, Michael Mounteney gat...@landcroft.co.uk wrote: Hello, I would appreciate some advice in setting-up a boot server. This would have OmniOS as the server and a couple of diskless HP thin clients running Linux as the clients. The Linux kernel is already

Re: [OmniOS-discuss] vnic zone disabled after reboot

hi, according to this doc: http://docs.oracle.com/cd/E19455-01/806-5529/6jehkcs2t/index.html I have create a /etc/dhcp.interface (vnic1) file. Then rebooted and I have link, but things are a bit strange: # ipadm show-addr ADDROBJ TYPE STATEADDR lo0/v4static

[OmniOS-discuss] centos 7 nfsv4 client nobody problems

hi, probably something easy, but I cannot seem to solve it. I have shared using nfs a dataset with these properties on omnios: # zfs get sharenfs tank/nuc01 NAMEPROPERTY VALUE SOURCE tank/nuc01 sharenfs rw=@192.168.0.0.0/24,root=@192.168.0.0/24

Re: [OmniOS-discuss] centos 7 nfsv4 client nobody problems

On Thu, Oct 2, 2014 at 7:46 PM, Natxo Asenjo natxo.ase...@gmail.com wrote: and of course it was every rh admin best friend: selinux # setsebool -P virt_use_nfs on and everything will be fine if you want to use nfs for libvirtd or just turn it off ;-) Sorry for the noise

Re: [OmniOS-discuss] best guide to tftp ?

On Fri, Oct 24, 2014 at 10:53 PM, Michael Mounteney gat...@landcroft.co.uk wrote: Hello, I want to use OmniOS as a boot server for various Linux thin clients. What's the most appropriate guide out there? There's a few, referring to obsolete problems, other OSs etc. Just tested and it works.

Re: [OmniOS-discuss] KVM within a child zone

On Tue, Dec 23, 2014 at 10:44 AM, Lauri Tirkkonen loth...@iki.fi wrote: On Tue, Dec 23 2014 19:28:47 +1000, Michael Mounteney wrote: That gets it a bit closer but I still need the real interface (e1000g1) for vnc and sshing in etc. and I can't give that to the zone exclusively. You can

Re: [OmniOS-discuss] Issues about OmniOS software installation package

hi, On Mon, Apr 27, 2015 at 7:14 AM, Nan Xiao xiaonan830...@gmail.com wrote: Hi Dan, I have installed the omniOS on vagrant. For some reasons, I can't configure OS to visit the internet, so let's why I want to get some out-of-box *.pkgs like Solaris. do you have defined what your default

[OmniOS-discuss] import zpool in freebsd/linux

hi, for reasons not relevant for a discussion here I need to move the data on on a on omnios zpool to a linux (preferably) ZoL installation or to freebsd (second choice). This is a data zpool, not rpool. So would it work to install another OS on the disks allocated to the rpool and then

Re: [OmniOS-discuss] OmniOS as home serwer (NAT, private projects)

hi Krzysztof, On Sun, Jun 12, 2016 at 11:35 AM, Krzysztof Grzempa wrote: > Cheers guys, > > I'm planning to build my own server at home for multiple purposes (my > projects, home NAS etc). I'm planning to use zones to separate WAN access > server (www hosting, git and svn

[OmniOS-discuss] smb 2 omnios OmniOS r151016

hi, in another thread (.$EXTEND/$QUOTA) I read that smb v2 is enabled (yay!). Do we need to do something to use that or it will "just work"? Thanks! -- Groeten, natxo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com

Re: [OmniOS-discuss] smb 2 omnios OmniOS r151016

by the way, I cannot see anything regarding smb/cifs 2 in http://omnios.omniti.com/wiki.php/ReleaseNotes/r151016 ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] SMB issues after r151014 -> r151018

On Fri, Apr 22, 2016 at 3:53 AM, Gordon Ross wrote: > I'm not sure how anyone ever gets access when your ACL has this ACE: > everyone@:rwxpdDaARWcCos:fd-:deny excellent catch! Deny ace's always get processed first in cifs, how could I miss that ;-) --

Re: [OmniOS-discuss] SMB issues after r151014 -> r151018

Hi Olaf On Thu, Apr 21, 2016 at 8:31 PM, Olaf Marzocchi wrote: > Thanks for the help. > Well first of all, how can the SMB server require everyone to have > read/execute access? no more private shares? > > Anyway, I got it working (for now) with: > > drwxr-xr-x+ 16 olaf

[OmniOS-discuss] cifs anonymous troubles

hi, trying to set up an anonymous share on workgroup mode I do not get it working. I have a dataset tank/test with these sharesmb properties: zfs get sharesmb tank/testshare NAMEPROPERTY VALUE SOURCE tank/testshare sharesmb name=test,guestok=true local These

Re: [OmniOS-discuss] cifs anonymous troubles

hi Gordon, On Sun, Apr 17, 2016 at 5:38 PM, Gordon Ross wrote: > Hi Dan, > > So with that bug fixed, one can logon as "guest" only if: > (1) you actually ask for guest in your logon request, > (2) a local Unix account named "guest" exists, and > (3) the guest account is

Re: [OmniOS-discuss] OmniOS r151018 is now out!

On Thu, Apr 14, 2016 at 8:47 PM, Dan McDonald wrote: > Start with the release notes: > > http://omnios.omniti.com/wiki.php/ReleaseNotes/r151018 > home box upgraded, zero problems ;-) Thanks! ___ OmniOS-discuss mailing list

Re: [OmniOS-discuss] Low powered and cheap OmniOS server?

hi, On Thu, Sep 29, 2016 at 4:54 PM, Paul Jochum wrote: > Hi All: > > Looking for the latest recommendations on a low powered and cheap > OmniOS server. This would be for home use, looking to use it as way of > backing up Linux and Windows boxes. Anyone have a

[OmniOS-discuss] plex on lx zone (centos 6.8) stops working after 2/3 days

hi, the subject says it. I installed a centos lx zone following the fine manual (https://omnios.omniti.com/wiki.php/LXZones) and it works great, but plex disappears from the network every 2 to three days. Rebooting the zone solves the problem until it happens again. How could I troubleshoot

[OmniOS-discuss] cifs smb 2.1 errors when using windows 10 backup tool

hi, There is a w10 system at the home and it's a bit critical for the wife ;-), so I want to have this up and running asap if some kind of trouble happens with it. Anyway, this windows 10 OS has a backup tool that allows you to dump an image to a network share using cifs, obviously. So I have

Re: [OmniOS-discuss] cifs smb 2.1 errors when using windows 10 backup tool

On Wed, Oct 12, 2016 at 5:00 PM, Jeff Stockett wrote: > FWIW, you could create a backup volume and share it via iscsi to your > wife’s PC – quite a few commands to accomplish on the omnios side but easy > if you have nappit already. Once you attach it, run windows backup,

Re: [OmniOS-discuss] cifs smb 2.1 errors when using windows 10 backup tool

hi, > > On Wed, Oct 12, 2016 at 6:07 PM, Gordon Ross > wrote: > >> Interesting finding re. VHD support needing resiliency support in SMB 2.1. >> Thanks for the KB article: https://support.microsoft.com/en-us/kb/2920193 >> >> We have resiliency support in NexentaStor 5.0

Re: [OmniOS-discuss] cifs smb 2.1 errors when using windows 10 backup tool

.0 (shameless plug:) > https://nexenta.com/products/nexentastor > We should work on upstreaming that code soon. > > > On Wed, Oct 12, 2016 at 8:54 AM, Natxo Asenjo <natxo.ase...@gmail.com> > wrote: > > hi, > > > > There is a w10 system at the home and i

Re: [OmniOS-discuss] LX Zone DTrace

hi, On Sat, Jan 14, 2017 at 3:16 PM, Mini Trader wrote: > Well the author at my request was able to remove the call to os.getcwd() > which allows the program to operate. > > > If anyone wants to tinker here is an example that will likely break on > someones system. I

Re: [OmniOS-discuss] plex on lx zone (centos 6.8) stops working after 2/3 days

On Mon, Nov 28, 2016 at 3:51 PM, Rafael Pardinas wrote: > Perhaps you should add a network mask to avoid network inconsistencies. I > did it by just adding the IP using the CIDR notation, in your case it > should be: > > add property (name=ips,value="192.168.0.120/24") <-- or

Re: [OmniOS-discuss] NFS 4.2 Support - Sparse Files

On Thu, Jan 5, 2017 at 3:56 PM, Olaf Marzocchi wrote: > I'm using right now Crashplan under OmniOS but it's been already declared > as discontinued and I may need an alternative sometimes in the future, even > if it still works fine. > same here, althouth since the lx

Re: [OmniOS-discuss] How some services boot

hi, On Thu, Apr 6, 2017 at 8:16 PM, Software Information < softwareinfor...@gmail.com> wrote: > Hi All > Just trying to understand how some services work under OmniOS. Please help > me to understand this. I have build omnios-r151020-4151d05 and I am running > a Git Server in a zone. I used

[OmniOS-discuss] crash after upgrading to 151024

hi, I upgraded our home nas from the old stable ce to the new stable one. The process went ok, but after rebooting it has crashed twice: this is the info I can see with fmpdump: # fmdump -Vp -u 95f72642-1099-ca7a-f1ca-952f0f5a9906 TIME UUID SUNW-MSG-ID Nov 19 2017

Re: [OmniOS-discuss] crash after upgrading to 151024

for the very fast fix to a humble home user. Amazing response. -- regards, Natxo On Sun, Nov 19, 2017 at 10:22 PM, Andy Fiddaman <omn...@citrus-it.net> wrote: > > On Sun, 19 Nov 2017, Natxo Asenjo wrote: > > ; hi, > ; > ; I upgraded our home nas from the old stable

[OmniOS-discuss] [ot] recommendation on jbod enclosure (16-bay, preferably 24 bay) 2.5 inch sas/sata

hi, the subject says it all, I guess. I am based in The Netherlands, but buying in the EU should be ok. I can only find very expensive Dell or HP kit (> EUR 5000) but I cannot seem to find in here something like this: https://www.neweggbusiness.com/product/product.aspx?item=9b-1uw-0036-00096

Re: [OmniOS-discuss] omnios not updating

ok, rebooting solved this non issue. Sorry for the noise On Fri, Jan 5, 2018 at 8:26 PM, Natxo Asenjo <natxo.ase...@gmail.com> wrote: > hi, > > my home filer running OmniOS v11 r151024d keeps updating the same set of > packages: > > # pkg update -v > WARNING: The boot

[OmniOS-discuss] omnios not updating

hi, my home filer running OmniOS v11 r151024d keeps updating the same set of packages: # pkg update -v WARNING: The boot environment being modified is not the active one. Changes made in the active BE will not be reflected on the next boot. Packages to update: 7