Add the netdev param to the instance_dump function to make it possible
to verify this for an existing instance.
Signed-off-by: Stijn Tintel
---
service/instance.c | 8
1 file changed, 8 insertions(+)
diff --git a/service/instance.c b/service/instance.c
index 8202d65..9863c7d 100644
, no packets should ever have this
status.
Signed-off-by: Stijn Tintel
---
root/usr/share/firewall4/templates/ruleset.uc | 4
1 file changed, 4 deletions(-)
diff --git a/root/usr/share/firewall4/templates/ruleset.uc
b/root/usr/share/firewall4/templates/ruleset.uc
index 9537ba2..f57836e 100644
, regardless of the interface
having public addresses or not.
Fixes: #11930
Fixes: 83e14f455817 ("router: advertise removed addresses as invalid in 3
consecutive RAs")
Signed-off-by: Stijn Tintel
---
src/router.c | 15 +--
1 file changed, 9 insertions(+), 6 deletions(-)
diff -
explains this, but if there is no default route, we silently
override ra_lifetime.
Add a debug message for the latter case, and explicitly mention
overriding ra_lifetime in both cases.
Signed-off-by: Stijn Tintel
---
src/router.c | 20 +++-
1 file changed, 11 insertions(+), 9 deletions
explains this, but if there is no default route, we silently
override ra_lifetime.
Add a debug message for the latter case, and explicitly mention
overriding ra_lifetime in both cases.
Signed-off-by: Stijn Tintel
---
src/router.c | 20 +++-
1 file changed, 11 insertions(+), 9 deletions
, regardless of the interface
having public addresses or not.
Fixes: #11930
Fixes: 83e14f455817 ("router: advertise removed addresses as invalid in 3
consecutive RAs")
Signed-off-by: Stijn Tintel
---
src/router.c | 19 ---
1 file changed, 12 insertions(+), 7 deletions(-)
diff -
in Beacon and Probe Response frames of the first
interface.
This depends on driver and client support. Enabling this will result in
all but the first interface not being visible at all for clients that do
not support it.
Signed-off-by: Stijn Tintel
---
package/network/services/hostapd/files
'bpfeb' [-Werror,-Woption-ignored]
Add -fno-stack-protector to BPF_CFLAGS to fix this.
Signed-off-by: Stijn Tintel
---
package/network/utils/xdp-tools/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/network/utils/xdp-tools/Makefile
b/package/network/utils/xdp
nd drivers with the same limitation, so revert to the orginal
behavior for now, until we have a better solution in place.
Fixes: #13156
Signed-off-by: Stijn Tintel
---
.../patches/991-Fix-OpenWrt-13156.patch | 63 +++
1 file changed, 63 insertions(+)
create mode 100644
packa
/openwrt-realtek-rtl839x-edgecore_ecs4100-12ph-squashfs-sysupgrade.bin
Signed-off-by: Stijn Tintel
---
I took the DTS from the TIP OpenWiFi project. It was introduced in the
initial commit of their Github repo [1]. I added gpio1 and
label-mac-device, and changed rtl838x-soc in the compatible line
not working (D-Link DGS-1210-52, Netgear GS750E, TP-Link
SG2452P/T1600G-52PS), use PHYs at a different address (Panasonic
SwitchM48EG PN28480K), or already have the phy-is-integrated property
set on the PHYs at address 48 and 49.
Signed-off-by: Stijn Tintel
---
.../realtek/files-5.15/drivers/net
According to the Realtek SDK code, the RTL8214FC, RTL8218B and RTL8218FB
all have the same chip ID 0x6276. Let's add a constant for it, as we're
using it in more than one location.
Signed-off-by: Stijn Tintel
---
.../linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c | 6 --
1 file
Taken from TIP OpenWiFi:
https://github.com/Telecominfraproject/wlan-ap/raw/88d6633c85acd4143cfcb1f0a4fdcfdc88f35f3e/feeds/ipq807x_v5.4/ath11k-wifi/board-edgecore-eap101.bin.IPQ6018
Signed-off-by: Stijn Tintel
---
board-edgecore_eap101.ipq6018 | Bin 0 -> 65644 bytes
1 file changed
for target 'compile' failed
See https://dev.openwrt.org/ticket/18234 - make dirclean fixed it for me.
Kind regards,
Stijn
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
monitored.
* sflowovsd:
The Host sFlow agent can automatically configure the sFlow settings in
the Open vSwitch.
Thanks to jow, who wrote the initial Makefile, cross-compilation and
uClibc patches.
[1] http://host-sflow.sourceforge.net/about.php
Signed-off-by: Stijn Tintel st...@linux-ipv6
Remove another call to backtrace_symbols_fd to make hsflowd compile
for x86+uClibc targets.
---
net/hsflowd/patches/200-uclibc-compat.patch | 10 +-
1 files changed, 9 insertions(+), 1 deletions(-)
diff --git a/net/hsflowd/patches/200-uclibc-compat.patch
This patch enables few extra kernel options for the kvm_guest subtarget:
- Tickless kernel to avoid timer ticks in idle guests, reduces CPU usage
- Enable paravirtualization steal time support
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/x86/kvm_guest/config-3.3 |4
On 16-06-12 19:27, Stijn Tintel wrote:
Remove another call to backtrace_symbols_fd to make hsflowd compile
for x86+uClibc targets.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
net/hsflowd/patches/200-uclibc-compat.patch | 10 +-
1 files changed, 9 insertions(+), 1 deletions
---
target/linux/x86/kvm_guest/config-3.10 | 95 ++
target/linux/x86/kvm_guest/target.mk | 2 +
2 files changed, 97 insertions(+)
create mode 100644 target/linux/x86/kvm_guest/config-3.10
diff --git a/target/linux/x86/kvm_guest/config-3.10
---
target/linux/x86/kvm_guest/config-3.7 | 87 ---
1 file changed, 87 deletions(-)
delete mode 100644 target/linux/x86/kvm_guest/config-3.7
diff --git a/target/linux/x86/kvm_guest/config-3.7
b/target/linux/x86/kvm_guest/config-3.7
deleted file mode 100644
index
---
target/linux/x86/kvm_guest/config-3.3 | 91 ---
1 file changed, 91 deletions(-)
delete mode 100644 target/linux/x86/kvm_guest/config-3.3
diff --git a/target/linux/x86/kvm_guest/config-3.3
b/target/linux/x86/kvm_guest/config-3.3
deleted file mode 100644
index
The 3.7 kernel isn't used by any of the x86 subtargets, so remove it.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/x86/config-3.7| 404 ---
.../linux/x86/patches-3.7/006-yenta_mistery.patch | 20 -
.../patches-3.7/009
The 3.6 kernel isn't used by any of the x86 subtargets, so remove it.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/x86/config-3.6 | 388 ---
target/linux/x86/geos/config-3.6 | 25 ---
2 files changed, 413 deletions(-)
delete mode
Building kmod-e100 fails with this error:
Package kmod-e100 is missing dependencies for the following libraries:
mii.ko
Have kmod-e100 depend on kmod-mii to fix this.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/linux/modules/netdevices.mk | 2 +-
1 file changed, 1
,
Stijn
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
This fixes the Heartbleed bug (CVE-2014-0160).
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/libs/openssl/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/libs/openssl/Makefile b/package/libs/openssl/Makefile
index 39fc513..26833a3 100644
This patch, taken from upstream commit
96db9023b881d7cd9f379b0c154650d6c108e9a3, fixes the Heartbleed bug
(CVE-2014-0160).
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/openssl/Makefile| 2 +-
package/openssl/patches/210-CVE-2014-0160.patch | 87
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/x86/kvm_guest/config-3.3 | 9 -
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/target/linux/x86/kvm_guest/config-3.3
b/target/linux/x86/kvm_guest/config-3.3
index 38f9db6..4cbbf1a 100644
--- a/target/linux/x86
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/x86/kvm_guest/config-3.7 | 87 +++
1 file changed, 87 insertions(+)
create mode 100644 target/linux/x86/kvm_guest/config-3.7
diff --git a/target/linux/x86/kvm_guest/config-3.7
b/target/linux/x86
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/x86/config-3.7 | 40 ++--
1 file changed, 26 insertions(+), 14 deletions(-)
diff --git a/target/linux/x86/config-3.7 b/target/linux/x86/config-3.7
index 4f4dba2..96ff13f 100644
--- a/target/linux
On 11-02-13 21:04, Aleksander Morgado wrote:
Any suggestion?
You forgot option #4: forget about the whole systemd madness, and
migrate to eudev (1)
Systemd bloat simply doesn't belong on an embedded system, IMHO.
(1) http://www.gentoo.org/proj/en/eudev/
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/network/services/lldpd/Makefile | 8 +---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/package/network/services/lldpd/Makefile
b/package/network/services/lldpd/Makefile
index f0983f7..024116c 100644
--- a/package
ath9k based AP as well to make sure it doesn't break AP mode.
Best regards,
Stijn
Index: package/hostapd/files/wpa_supplicant.sh
===
--- package/hostapd/files/wpa_supplicant.sh (revision 19550)
+++ package/hostapd/files
On 28-02-10 11:28, Stijn Tintel wrote:
This patch allows multiple listen ports to be configured for dropbear in
/etc/config/dropbear. It renames the 'Port' option to 'Ports', so this
will break existing configs.
Regards,
Stijn
___
openwrt-devel
This patch removes redundant code in the psk handling in wpa_supplicant.sh.
Regards,
Stijn
Index: package/hostapd/files/wpa_supplicant.sh
===
--- package/hostapd/files/wpa_supplicant.sh (revision 19917)
+++ package/hostapd/files
On 01-03-10 14:12, m...@maddes.net wrote:
On Mon, March 1, 2010 10:31, Bas Mevissen wrote:
On Sun, 2010-02-28 at 11:30 +0100, Stijn Tintel wrote:
On 28-02-10 11:28, Stijn Tintel wrote:
This patch allows multiple listen ports to be configured for dropbear
This patch series enables management frame protection (802.11w) in hostapd and
wpa_supplicant. Both programs implement IEEE Std 802.11w-2009 since version
0.7.0 (1),(2). According to (3), the only driver that currently supports
802.11w is ath9k.
I have tested this on two identical OpenWrt
instead.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/hostapd/files/hostapd.sh |8
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/package/hostapd/files/hostapd.sh b/package/hostapd/files/hostapd.sh
index 622eeac..2295b43 100644
--- a/package/hostapd
Enable management frame protection in wpa_supplicant, and make it
configurable in /etc/config/wireless.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/hostapd/files/wpa_supplicant-full.config |2 +-
package/hostapd/files/wpa_supplicant.sh | 10 ++
2 files
Enable management frame protection in hostapd, and make it configurable
in /etc/config/wireless. Since ath9k is currently the only driver that
supports MFP, it will only be enabled when ath9k is enabled.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/hostapd/Makefile |3
ce41df3dc0a876436cfe0598b5e2df0557510a3d Mon Sep 17 00:00:00 2001
From: Stijn Tintel st...@linux-ipv6.be
Date: Mon, 1 Mar 2010 17:08:59 +0100
Subject: [PATCH 1/4] wpa_supplicant: cleanup psk handling
Cleanup redundant psk handling code in wpa_supplicant.sh.
(I sent this one to openwrt-devel before, but I am resending it as part
This patch fixes the description for KernelPackage xen-fbdev caused by a
typo in xen.mk.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
diff --git a/package/kernel/modules/xen.mk b/package/kernel/modules/xen.mk
index e5f62ae..2252af4 100644
--- a/package/kernel/modules/xen.mk
+++ b/package
On 23-03-10 16:20, Jonas Gorski wrote:
These patches enhance the ar8216 driver with support for the ar8316
switch chip. Most changes are taken from the S16 driver in the
TP-Link TLWR741ND sources, the AVM Fritz!Box 7390 sources, or directly
read out values of the RouterStation Pro.
The
This patch series adds a new x86 subtarget for running inside a KVM guest.
Stijn Tintel (4):
kernel: move xen.mk to virtual.mk
kernel: add VirtIO device support
x86: add kvm_guest subtarget
kernel: virtio modules depend on x86_kvm_guest
package/kernel/modules/{xen.mk = virtual.mk
This patch adds a KVM guest subtarget to the x86 target. Since VirtIO is
the preferred I/O virtualization platform for kvm, this target expects
it's root device to be /dev/vda.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/x86/Makefile |2 +-
target
Add support for VirtIO-based paravirtualized devices used by various
virtualization platforms.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/virtual.mk | 52 +
1 files changed, 52 insertions(+), 0 deletions(-)
diff --git
Move Xen kernel modules into a general virtualization category.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/{xen.mk = virtual.mk} | 12 ++--
1 files changed, 6 insertions(+), 6 deletions(-)
rename package/kernel/modules/{xen.mk = virtual.mk} (94%)
diff
Make the VirtIO modules depend on the new x86_kvm_guest subtarget.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/virtual.mk |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/package/kernel/modules/virtual.mk
b/package/kernel/modules
This patch series adds a new x86 subtarget for running inside a KVM guest.
The v2 series fixes some copy-paste errors and an accidentally commited file.
Stijn Tintel (4):
kernel: move xen.mk to virtual.mk
kernel: add VirtIO device support
x86: add kvm_guest subtarget
kernel: virtio
Add a KVM guest subtarget to the x86 target. Since VirtIO is the
preferred I/O virtualization platform for kvm, this target expects it's
root device to be /dev/vda.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/x86/Makefile |2 +-
target/linux/x86
Add support for VirtIO-based paravirtualized devices used by various
virtualization platforms.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/virtual.mk | 48 +
1 files changed, 48 insertions(+), 0 deletions(-)
diff --git
Move Xen kernel modules into a general virtualization category.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/{xen.mk = virtual.mk} | 12 ++--
1 files changed, 6 insertions(+), 6 deletions(-)
rename package/kernel/modules/{xen.mk = virtual.mk} (94%)
diff
Make the VirtIO modules depend on the new x86_kvm_guest subtarget.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/virtual.mk |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/package/kernel/modules/virtual.mk
b/package/kernel/modules
This patch series adds a new x86 subtarget for running inside a KVM guest.
The v2 series fixes some copy-paste errors and an accidentally commited file.
The v3 series fixes missing config symbols.
Stijn Tintel (4):
kernel: move xen.mk to virtual.mk
kernel: add VirtIO device support
x86
Add support for VirtIO-based paravirtualized devices used by various
virtualization platforms.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/virtual.mk | 48 +
1 files changed, 48 insertions(+), 0 deletions(-)
diff --git
Make the VirtIO modules depend on the new x86_kvm_guest subtarget.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/virtual.mk |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/package/kernel/modules/virtual.mk
b/package/kernel/modules
Move Xen kernel modules into a general virtualization category.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/{xen.mk = virtual.mk} | 12 ++--
1 files changed, 6 insertions(+), 6 deletions(-)
rename package/kernel/modules/{xen.mk = virtual.mk} (94%)
diff
On 26-03-10 20:12, Stijn Tintel wrote:
This patch series adds a new x86 subtarget for running inside a KVM guest.
The v2 series fixes some copy-paste errors and an accidentally commited file.
The v3 series fixes missing config symbols.
If anyone wants to try running OpenWrt in KVM
, because of their ridiculous idea of support. Especially
since their SDK just seems to be a copy of OpenWrt with some changes and
additions...
Regards,
Stijn
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman
This patch series adds a new x86 subtarget for running inside a KVM guest.
The v2 series fixes some copy-paste errors and an accidentally commited file.
The v3 series fixes missing config symbols.
The v4 series fixes the use of squashfs images.
Stijn Tintel (5):
kernel: move xen.mk
Add support for VirtIO-based paravirtualized devices used by various
virtualization platforms.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/virtual.mk | 48 +
1 files changed, 48 insertions(+), 0 deletions(-)
diff --git
Initialize virtio earlier, so that block2mtd can be used on virtio based
block devices (virtio_blk). This fixes the ability to run squashfs
images inside a KVM guest.
Upstream bug report: https://bugzilla.kernel.org/show_bug.cgi?id=15644
Signed-off-by: Stijn Tintel st...@linux-ipv6
Make the VirtIO modules depend on the new x86_kvm_guest subtarget.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/virtual.mk |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/package/kernel/modules/virtual.mk
b/package/kernel/modules
Add a KVM guest subtarget to the x86 target. Since VirtIO is the
preferred I/O virtualization platform for kvm, this target expects it's
root device to be /dev/vda.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/x86/Makefile |2 +-
target/linux/x86
, and solves some IRQ
problems by enabling ACPI. The patch added in v4 was removed, since it went
upstream in 2.6.32.13, 2.6.33.4 and 2.6.34.
Tested on CentOS 5.5 and Gentoo 10.0 kvm hosts.
Stijn Tintel (4):
kernel: move xen.mk to virtual.mk
kernel: add VirtIO device support
x86: add
Add support for VirtIO-based paravirtualized devices used by various
virtualization platforms.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/virtual.mk | 48 +
1 files changed, 48 insertions(+), 0 deletions(-)
diff --git
Move Xen kernel modules into a general virtualization category.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/virtual.mk | 110 +
package/kernel/modules/xen.mk | 110 -
2 files changed, 110
Make the VirtIO modules depend on the new x86_kvm_guest subtarget.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/modules/virtual.mk |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/package/kernel/modules/virtual.mk
b/package/kernel/modules
Add a KVM guest subtarget to the x86 target. Since VirtIO is the
preferred I/O virtualization platform for kvm, this target expects it's
root device to be /dev/vda.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/x86/Makefile |2 +-
target/linux/x86
request.
Solve this problem by killing the existing DHCP instance and starting a
new one rather than keeping the old one.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/base-files/files/lib/network/config.sh | 55 +++-
1 files changed, 25 insertions(+), 30
On 18-07-10 21:04, Stijn Tintel wrote:
This patch series adds a new x86 subtarget for running inside a KVM guest.
Anyone had a chance to look at this yet?
Thanks,
Stijn
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https
---
target/linux/octeon/base-files/lib/upgrade/platform.sh | 9 +
1 file changed, 9 insertions(+)
diff --git a/target/linux/octeon/base-files/lib/upgrade/platform.sh
b/target/linux/octeon/base-files/lib/upgrade/platform.sh
index 11399a2..d81d7fd 100755
---
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
.../octeon/base-files/lib/upgrade/platform.sh | 26 --
1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/target/linux/octeon/base-files/lib/upgrade/platform.sh
b/target/linux/octeon/base-files/lib/upgrade
---
target/linux/octeon/base-files/lib/upgrade/platform.sh | 9 +
1 file changed, 9 insertions(+)
diff --git a/target/linux/octeon/base-files/lib/upgrade/platform.sh
b/target/linux/octeon/base-files/lib/upgrade/platform.sh
index 11399a2..d81d7fd 100755
---
Runtime tested on Ubiquiti EdgeRouter Lite.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/octeon/config-3.18| 252 +
.../100-ubnt_edgerouter2_support.patch | 31 +++
.../110-er200-ethernet_probe_order.patch | 34
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
.../octeon/base-files/lib/upgrade/platform.sh | 26 --
1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/target/linux/octeon/base-files/lib/upgrade/platform.sh
b/target/linux/octeon/base-files/lib/upgrade
On 05-12-14 01:01, Stijn Tintel wrote:
platform_do_upgrade() {
local board=$(octeon_board_name)
+ local rootfs=$(platform_get_rootfs)
+
+ [ -d ${rootfs} ] || return 1
This should be -b, please ignore this patch series, I'll send a new one.
Kind regards,
Stijn
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/octeon/base-files/lib/upgrade/platform.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/octeon/base-files/lib/upgrade/platform.sh
b/target/linux/octeon/base-files/lib/upgrade/platform.sh
index
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
.../linux/octeon/base-files/lib/preinit/79_move_config | 18 ++
target/linux/octeon/base-files/lib/upgrade/platform.sh | 11 +++
2 files changed, 25 insertions(+), 4 deletions(-)
create mode 100644 target/linux/octeon
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/octeon/base-files/lib/upgrade/platform.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/octeon/base-files/lib/upgrade/platform.sh
b/target/linux/octeon/base-files/lib/upgrade/platform.sh
index
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
target/linux/octeon/base-files/lib/upgrade/platform.sh | 7 ---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/target/linux/octeon/base-files/lib/upgrade/platform.sh
b/target/linux/octeon/base-files/lib/upgrade/platform.sh
this as well, both with 3.14 kernel + backported patch, and
with 3.18 kernel + patch. Reporting it to netfilter-devel and netdev
lists is still on my todo list. Feel free to beat me to it
Kind regards,
Stijn
___
openwrt-devel mailing list
openwrt-devel
,
struct nf_conn *ct;
int iif;
+ if (secpath_exists(skb))
+ return NF_ACCEPT;
+
ct = nf_ct_get(skb, ctinfo);
if (!ct)
return NF_ACCEPT;
Kind regards,
Stijn
___
openwrt-devel mailing
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/linux/modules/crypto.mk | 7 ++-
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/package/kernel/linux/modules/crypto.mk
b/package/kernel/linux/modules/crypto.mk
index d17f1e1..04903c3 100644
--- a/package/kernel
---
package/kernel/linux/modules/crypto.mk | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/package/kernel/linux/modules/crypto.mk
b/package/kernel/linux/modules/crypto.mk
index ad1fe4e..d17f1e1 100644
--- a/package/kernel/linux/modules/crypto.mk
+++
and x86_64.
Stijn Tintel (10):
kernel/modules: remove superfluous backslash
kernel/modules: add kmod-crypto-aead
kernel/modules: kmod-crypto-manager: depend on kmod-crypto-aead
kernel/modules: remove CRYPTOMGR_MODULES
kernel/modules: add kmod-crypto-seqiv
kernel/modules: add kmod-crypto
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/linux/modules/crypto.mk | 11 +++
1 file changed, 11 insertions(+)
diff --git a/package/kernel/linux/modules/crypto.mk
b/package/kernel/linux/modules/crypto.mk
index 04903c3..3193fb0 100644
--- a/package/kernel/linux
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/linux/modules/crypto.mk | 11 +++
1 file changed, 11 insertions(+)
diff --git a/package/kernel/linux/modules/crypto.mk
b/package/kernel/linux/modules/crypto.mk
index 1fd10d9..5d49160 100644
--- a/package/kernel/linux
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/linux/modules/crypto.mk | 11 +++
1 file changed, 11 insertions(+)
diff --git a/package/kernel/linux/modules/crypto.mk
b/package/kernel/linux/modules/crypto.mk
index 3193fb0..1fd10d9 100644
--- a/package/kernel/linux
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/linux/modules/crypto.mk | 13 +
1 file changed, 13 insertions(+)
diff --git a/package/kernel/linux/modules/crypto.mk
b/package/kernel/linux/modules/crypto.mk
index de3d851..ad1fe4e 100644
--- a/package/kernel/linux
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/linux/modules/crypto.mk | 15 ---
1 file changed, 4 insertions(+), 11 deletions(-)
diff --git a/package/kernel/linux/modules/crypto.mk
b/package/kernel/linux/modules/crypto.mk
index 5d49160..eec7934 100644
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/linux/modules/crypto.mk | 12
1 file changed, 12 insertions(+)
diff --git a/package/kernel/linux/modules/crypto.mk
b/package/kernel/linux/modules/crypto.mk
index eec7934..9d69cce 100644
--- a/package/kernel/linux
On 23-12-14 22:59, Stijn Tintel wrote:
On 23-12-14 20:11, Andre Valentin wrote:
Hi!
I just recompiled the module and loaded it on the router. But it seems that
this does not fix the error. 5 minutes later I got several alerts (ping
checks).
The workaround below seems to work for me. How
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/linux/modules/crypto.mk | 12
1 file changed, 12 insertions(+)
diff --git a/package/kernel/linux/modules/crypto.mk
b/package/kernel/linux/modules/crypto.mk
index 9d69cce..73f36be 100644
--- a/package/kernel/linux
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/kernel/linux/modules/crypto.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/kernel/linux/modules/crypto.mk
b/package/kernel/linux/modules/crypto.mk
index d9d673c..de3d851 100644
--- a/package/kernel/linux
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/network/services/hostapd/files/hostapd.sh | 29 ++
package/network/services/hostapd/files/netifd.sh | 37 ++-
2 files changed, 65 insertions(+), 1 deletion(-)
diff --git a/package/network/services
This patch series adds support for fast BSS transition (802.11r) to hostapd.
Only tested association with ath9k client on ath9k AP with netifd. Changes to
hostapd.sh are untested.
https://dev.openwrt.org/ticket/13187
Stijn Tintel (3):
hostapd: append nasid to config for all WPA types
hostapd
To enable 802.11r, wpa_key_mgmt should contain FT-EAP or FT-PSK. Allow
multiple key management algorithms to make this possible.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/network/services/hostapd/files/hostapd.sh | 6 --
package/network/services/hostapd/files/netifd.sh | 6
The 802.11r implementation in hostapd uses nas_identifier as PMK-R0 Key
Holder identifier. As 802.11r can also be used with WPA Personal, nasid
should be appended to the hostapd config for all WPA types.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/network/services/hostapd/files
-intel)
endef
Remove them here as well.
Kind regards,
Stijn
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
1 - 100 of 593 matches
Mail list logo