=157005751iu=/4140/ostg.clktrk
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net javascript:;
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
:44 GMT-02:00 Roberto Spadim robe...@spadim.com.br:
well... if you are using a time based table, something like
table(
datetime,
channel,
value,
primary (datetime,channel)
)
you can use some datetime rounding, for example
datetime = floor( microtime() / 0.5) *0.5
each 0,5 seconds you
-developers@lists.sourceforge.net');
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
___
Owfs-developers
http://sourceforge.net/p/owfs/mailman/message/19829236/
Em terça-feira, 28 de outubro de 2014, Roberto Spadim robe...@spadim.com.br
escreveu:
There's a command to convert temperature of all sensors in the bus, that's
the simultaneous conversion
Check owfs file system there's a file just
/temperature return 0.
Wiki is outdated http://owfs.org/index.php?page=temperature-measurements
I have compiled from source with --enable-mt
./configure --disable-owftpd --disable-owhttpd --enable-usb
--enable-debian --enable-owfs --enable-mt --prefix=/usr
2014-10-28 15:13 GMT+01:00 Roberto Spadim
*restart the owserver
Em domingo, 26 de outubro de 2014, Roberto Spadim robe...@spadim.com.br
escreveu:
If you restart every hour does it occurs?
Em domingo, 26 de outubro de 2014, Stefano Miccoli mo...@icloud.com
javascript:_e(%7B%7D,'cvml','mo...@icloud.com'); escreveu:
Just a dumb
--
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
javascript:_e(%7B%7D,'cvml','Owfs-developers@lists.sourceforge.net');
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
://p.sf.net/sfu/Zoho
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
the load resistors getting well past
125C and cooking the 18b20s.
I promise to send pictures when we are done.
jerry
On 10/01/2014 03:52 PM, Roberto Spadim wrote:
if it's not to control a process, i think could use without problems,
like paul told, temperature don't change too fast, only
to handle over 300 thermocouples becomes a real chore. The only
risk I see is that we start having the load resistors getting well past
125C and cooking the 18b20s.
I promise to send pictures when we are done.
jerry
On 10/01/2014 03:52 PM, Roberto Spadim wrote:
if it's not to control a process, i
://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
here using usb-serial isnt a problem
but if i remember some linux usb-serial drivers have a limit of
howmany devices/computer could be used
maybe it' near to 16usd/computer (per linux operational system)
2014-10-01 16:13 GMT-03:00 Roberto Spadim robe...@spadim.com.br:
:) probably yes
but any
of all the devices very quickly. Thus the need for more
buses to run in parallel.
jerry
On 10/01/2014 11:53 AM, Roberto Spadim wrote:
hummm you need to measure, or check a alarm condition?
with 300 using alarm condition is possible only alarmmed sensors will
be reported at bus, it's
, Roberto Spadim robe...@spadim.com.br
wrote:
here using usb-serial isnt a problem
but if i remember some linux usb-serial drivers have a limit of
howmany devices/computer could be used
maybe it' near to 16usd/computer (per linux operational system)
2014-10-01 16:13 GMT-03:00 Roberto Spadim
, but then your temperature changes aren't that
fast.
On Wed, Oct 1, 2014 at 4:53 PM, Roberto Spadim robe...@spadim.com.br
wrote:
that what i stored here some years ago when testing ds1820 devices
in other words 300*.01 = 3 seconds
maybe less maybe more
what update period you need
/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS
','Owfs-developers@lists.sourceforge.net');
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
Meet PCI DSS 3.0 Compliance Requirements
channels don't seem to be synchronous nor correlated.
H
Roberto Spadim skrev 2014-09-12 17:55:
i think it's like a bad power supply or something like it
-
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
http://smeden.org/krypta/kryptera.html
--
Roberto Spadim
SPAEmpresarial
Eng
mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
Want excitement?
Manually upgrade your production
.
--
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
Levine gregg.drw...@gmail.com
This signature fought the Time Wars, time and again.
On Wed, Aug 13, 2014 at 12:38 PM, Roberto Spadim robe...@spadim.com.br
wrote:
i tested 5 diferent usb-serial devices and all they worked without
problem,
the only problem is cross-compile usb-serial driver
-developers mailing list
Owfs-developers@lists.sourceforge.net javascript:;
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
...@lists.sourceforge.net
javascript:_e(%7B%7D,'cvml','Owfs-developers@lists.sourceforge.net');https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
HPCC
-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
Is your legacy SCM system holding you
owfs is
running.
Cheers,
Eloy Paris.-
On May 7, 2014 12:44:11 AM GMT+04:00, Roberto Spadim
robe...@spadim.com.br wrote:
more than one server is opening the usb port
you should run the owserver, and others servers should connect to it
2014-05-06 17:17 GMT-03:00 Chris Green c
to install. Get started now for free.
http://p.sf.net/sfu/SauceLabs
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e
available. Download your free book today!
http://p.sf.net/sfu/13534_NeoTech
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
Learn
nice :)
the error page i don't remember what i done and how it work, must check
with paul :/
2014-03-20 16:00 GMT-03:00 Michael Markstaller m...@elabnet.de:
On 20.03.2014 18:11, Roberto Spadim wrote:
2014-03-20 13:45 GMT-03:00 Michael Markstaller m...@elabnet.de
mailto:m...@elabnet.de
outline a command
sequence that triggers it so I can investigate?
Thanks,
Paul
On Thu, Mar 20, 2014 at 6:35 PM, Roberto Spadim robe...@spadim.com.brwrote:
nice :)
the error page i don't remember what i done and how it work, must check
with paul :/
2014-03-20 16:00 GMT-03:00 Michael
Hummm well all you need is owhttp.c file all json things are there add a
new jsonp directory and start a nde patch :)
Em quarta-feira, 19 de março de 2014, Michael Markstaller m...@elabnet.de
escreveu:
On 19.03.2014 00:44, Roberto Spadim wrote:
something like this?
|//JSON - instead
i don't know if we have the patch of json, maybe that's a nice start point
for you
owhttp is very easy to understand :)
2014-03-19 12:44 GMT-03:00 Paul Alfille paul.alfi...@gmail.com:
Send a patch. We'll include it.
On Wed, Mar 19, 2014 at 9:44 AM, Roberto Spadim robe...@spadim.com.brwrote
/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
Learn Graph Databases - Download FREE O'Reilly Book
Graph Databases is the definitive new guide to graph databases and their
applications
/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
Learn Graph Databases - Download FREE O'Reilly Book
Graph Databases is the definitive new guide to graph databases
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
something like this?
//JSON - instead of:{name:stackoverflow,id:5}//JSONP - return :
func({name:stackoverflow,id:5});
2014-03-18 20:39 GMT-03:00 Roberto Spadim robe...@spadim.com.br:
could you explain it better, for example, write a directory with /text,
/json and /jsonp to see what change
audience. Start now.
http://pubads.g.doubleclick.net/gampad/clk?id=124407151iu=/4140/ostg.clktrk
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
Android apps run on BlackBerry 10
Introducing the new BlackBerry
. Start now.
http://pubads.g.doubleclick.net/gampad/clk?id=124407151iu=/4140/ostg.clktrk
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
WatchGuard Dimension
it into a database using pyserial. Not a big deal, but not
as elegant as owfs and owserver.
I'd happily put a DS2483 at the 1wire end if I thought it would get me
anywhere, but I can't see that it will.
On Mon, Jan 27, 2014 at 1:20 PM, Roberto Spadim robe...@spadim.com.br
wrote:
? i don't
dash7 based?
2014-01-28 Roberto Spadim robe...@spadim.com.br:
if anyone have the link to buy the hardware i could buy and leave a
virtual machine online to test
2014-01-28 Paul Alfille paul.alfi...@gmail.com:
Very interesting.
You're right, we could just add it to owserver We'd just implement
@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
CenturyLink Cloud: The Leader in Enterprise Cloud Services.
Learn Why More
-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
CenturyLink Cloud: The Leader in Enterprise Cloud Services.
Learn Why
http://blog.philippklaus.de/2011/08/make-rs232-serial-devices-accessible-via-ethernet/
2014-01-27 Roberto Spadim robe...@spadim.com.br:
google ethernet serial you will see a lot of devices
try to get one with telnet rfc2217
(http://tools.ietf.org/html/rfc2217) that's what ser2net do
2014-01
? i don't understand
check:
ethernet (wifi ethernet, ethernet)
wireless (wifi ethernet, bluetooth, zb)
serial (rs232,rs485,rs422)
ow - serial-ow converters (ds2480b), microcontroler bus (on/off gpio),
i2c-ow converters (ds2482)
what part you need?
, Roberto Spadim
robe...@spadim.com.brjavascript:_e({}, 'cvml', 'robe...@spadim.com.br');
wrote:
? i don't understand
check:
ethernet (wifi ethernet, ethernet)
wireless (wifi ethernet, bluetooth, zb)
serial (rs232,rs485,rs422)
ow - serial-ow converters (ds2480b), microcontroler bus
anywhere, but I can't see that it will.
On Mon, Jan 27, 2014 at 1:20 PM, Roberto Spadim
robe...@spadim.com.brjavascript:_e({}, 'cvml', 'robe...@spadim.com.br');
wrote:
? i don't understand
check:
ethernet (wifi ethernet, ethernet)
wireless (wifi ethernet, bluetooth, zb)
serial (rs232
maybe a serial-serial converter coudl work
think a new device (you uC) running a firmware that will receive at
one serial port a default protocol, like rfc 2217, this protocol will
change other uC serial port settings, like baud rate, send receive,
etc
at linux side you create a fuse program that
-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
Eng. Automação e Controle
--
CenturyLink Cloud: The Leader
://pubads.g.doubleclick.net/gampad/clk?id=84349831iu=/4140/ostg.clktrk
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
maybe you have wrong impedance on the wire and the sensor is ok, try to
equalize the impedance of this sensor wire
2013/11/6 Jeff Siddall n...@siddall.name
On 11/05/2013 03:16 PM, Jeff Siddall wrote:
On 11/05/2013 01:45 PM, Roberto Spadim wrote:
check the checksum statistics and check
http://en.wikipedia.org/wiki/Signal_reflection
http://en.wikipedia.org/wiki/Signal_integrity
http://electronicdesign.com/communications/back-basics-impedance-matching-part-3
google about impedance matching, there's many info about it
2013/11/6 Roberto Spadim robe...@spadim.com.br
maybe you
humm, must check if that's the right answer but if this solve the problem
:) that's ok
2013/11/6 Jeff Siddall n...@siddall.name
On 11/06/2013 04:01 PM, Roberto Spadim wrote:
maybe you have wrong impedance on the wire and the sensor is ok, try to
equalize the impedance of this sensor wire
-developers
--
Roberto Spadim
SPAEmpresarial
--
November Webinars for C, C++, Fortran Developers
Accelerate application performance with scalable programming models. Explore
techniques for threading, error checking
://pubads.g.doubleclick.net/gampad/clk?id=60135031iu=/4140/ostg.clktrk
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
--
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance
-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
--
October Webinars: Code for Performance
Free Intel webinars can help you accelerate
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
i store in external app
Em 23/07/2013 14:11, Jan Sennesael jan.sennes...@skynet.be escreveu:
I am mesuring on a copper tube (sensor attached with tie wraps so the flat
side makes a good connection).
The temps i am measuring are between 12 and 22 °C. The tube and the sensor
are insulted with
every sensor must be calibrated
https://en.wikipedia.org/wiki/Calibration
in other words, get a sensor as default, and make every others sensors
have same value for the same temperature (normally a 0 Celsius ice bath)
some ds18x20 have calibration inside rom, other must be done via external
with text is very easy...
$tmp=file_get_contents('http page')
$tmp=explode(\n,$tmp); (now you have many lines)
foreach ($tmp as $line){
$tmp2=explode(\t,$line); (now you have key/value)
$key = $tmp2[0];
$value = $tmp2[1];
}
with json is easier
$tmp=json_decode(file_get_contents('http
hi, i done the ownet php, today i'm not using it, but must check if
code runs ok, i'm using owhttpd + php file_get_contents, it's faster
and consume less cpu/memory
i'm using the /text directory, but you can use the /json too, anyone
works really fast, IMO ownet php could be deprecated, but
Maybe make clean, and bootstrap or configure again, and try to recompile
Are you running a cross compiler?
Em 18/07/2013 19:25, Thomas Parvais tparv...@gmail.com escreveu:
Hi Mick
OK thank you for suggestion. I started compiling 2.9p1 on my sheevaplug,
but I think it will not be easy at
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
--
AlienVault
variables
and a global variable to cache this type information
Global Variables
OWNET_GLOBAL_CACHE_STRUCTURE (array)
2013/5/13 Roberto Spadim robe...@spadim.com.br
there's some information about 'field' type in some owfs directory, when i
done this json i didn't done many work doing it 'exactly
inside owphp:
getting value:
if ($parse_php_type $get_type!=OWNET_MSG_DIR_ALL){
$tmp =explode('/',$path);$c=count($tmp)-1;
if ($c0){ // must be something like '/dir/file' array('dir', 'file'),
count()-1 = 1 0
$variavel =$tmp[$c]; // get last two uri args
$ow =$tmp[$c-1];
unset($tmp);
if
this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
--
Try New Relic Now
/index.html
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
, but it
really doesn't use more elaborate methods for interfacing with owserver
than is used in the testprogram.
--
Med venlig Hilsen
Hans Erik Busk
On 07-04-2013 17:22, Roberto Spadim wrote:
nice, maybe you could test it in lazarus too? does it comes with
examples?
the delphi api
07/04/2013 14:02, Roberto Spadim robe...@spadim.com.br escreveu:
Nice, a clean interface is the best ownet need, about lazarus i think only
a test could work, its nice since lazarus can work in posix world and
windows world. But good work men, it will nice to have your client for
delphi with us
. The TCheckListBox
for setting flags is so far not implemented, but the RequestType sets
the wanted type.
--
Yours
Hans Erik Busk
On 07-04-2013 19:04, Roberto Spadim wrote:
Please, if possible send example with 'get' and 'set' and 'dir' commands
to retrieve and send information about files
may be wrong :-o
--
Med venlig Hilsen
Hans Erik Busk
On 07-04-2013 20:43, Roberto Spadim wrote:
You can set some owserver parameters, its works like setting a gpio
device pin, try the directories from owserver that set whats the
temperature unit for example, try to write 'C' or 'F
prizes.
Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
/27 Jim Duda j...@duda.tzo.com
On 03/27/2013 08:59 PM, Roberto Spadim wrote:
short circuit can be a voltage over 5volts too, some time ago i get
about 7volts in digital data wire, and the ds18b20 was reporting short
circuit, maybe your wire have interference like happened with me, or it's
the most
recent posts - join the conversation now. http://goparallel.sourceforge.net/
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
--
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall
30 USD example
http://www.aliexpress.com/item/Free-Shipping-Cheapest-Mini-Android-4-0-PC-Android-TV-Box-Cortex-A9-1-5Ghz-4G/737400238.html
2013/2/14 Roberto Spadim robe...@spadim.com.br
today android devices are very cheap, i talked some topics ago that should
be nice a android application
/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
--
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013
and get the hardware for free! Learn more.
http://p.sf.net/sfu
search these two roms:
uberoid
cyanogen
the cyanogen is know for the fastest android rom
they comes with root user without password, or a known password, so you can
run owfs with root privileges
2013/2/14 Roberto Spadim robe...@spadim.com.br
if you don't find the driver i have some drivers
/appdyn_d2d_jan
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_jan
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
SPAEmpresarial
--
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite
no problem i can wait
maybe a tar -zcf owfs.tgz /opt/owfs
it's small near 2mb i think
2013/2/1 Guy COLIN guy.co...@gmail.com
Roberto Spadim roberto at spadim.com.br writes:
nice, could you send me the binary files of your raspberry?
i have a arm eabi v4
hardware and i couldn't cross
thanks guy i will test
2013/2/1 Patryk p4tr...@gmail.com
**
W dniu 01.02.2013 o 18:39 Roberto Spadim robe...@spadim.com.br pisze:
no problem i can wait
maybe a tar -zcf owfs.tgz /opt/owfs
it's small near 2mb i think
Here's from mine
https://dl.dropbox.com/u/96422972/owfs.tar.gz
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
Spadim Technology / SPAEmpresarial
--
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile
--
Roberto Spadim
Spadim Technology / SPAEmpresarial
--
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile devices and provide instant support
Improve your efficiency, and focus
. Rescue delivers
http://p.sf.net/sfu/logmein_12329d2d
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
Spadim Technology / SPAEmpresarial
Spadim robe...@spadim.com.brwrote:
./configure --disable-zero
removed the segfault
2012/12/5 Roberto Spadim robe...@spadim.com.br
hi guys i got asegment fault sstarting the new 2.8p20 owhttpd
here is the gdb output
DEBUG: ow_tcp_read.c:(64) attempt 1 bytes Time: 1.00 seconds
DEBUG
://p.sf.net/sfu/logmein_12329d2d
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
Spadim Technology / SPAEmpresarial
usefull in AC)
put this divider before resistor and use the same project, you will reduce
voltage with caps, instead a resistor or a transformer, it's very smaller
and more energy efficient
2012/12/5 Markus Gaugusch mar...@gaugusch.at
On Dec 5, Roberto Spadim robe...@spadim.com.br wrote:
1 watt
mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
Spadim Technology / SPAEmpresarial
--
LogMeIn Rescue: Anywhere, Anytime Remote support
. Rescue delivers
http://p.sf.net/sfu/logmein_12329d2d
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
Spadim Technology / SPAEmpresarial
.so.20
#3 0x778dbd60 in start_thread () from /lib/libpthread.so.0
#4 0x77646e2d in clone () from /lib/libc.so.6
#5 0x in ?? ()
coudl get any help?
--
Roberto Spadim
Spadim Technology / SPAEmpresarial
./configure --disable-zero
removed the segfault
2012/12/5 Roberto Spadim robe...@spadim.com.br
hi guys i got asegment fault sstarting the new 2.8p20 owhttpd
here is the gdb output
DEBUG: ow_tcp_read.c:(64) attempt 1 bytes Time: 1.00 seconds
DEBUG: ow_tcp_read.c:(114) read: 1 - 0
/owfs-developers
--
Roberto Spadim
Spadim Technology / SPAEmpresarial
--
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
Spadim Technology / SPAEmpresarial
--
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
Spadim Technology / SPAEmpresarial
://lists.sourceforge.net/lists/listinfo/owfs-developers
--
Roberto Spadim
Spadim Technology / SPAEmpresarial
--
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free
1 - 100 of 530 matches
Mail list logo