Hi,
i have a question regarding nodes import with computername
I would like to import nodes (mac and computername) with pfcmd but it is not
possible, the node table at pf is filled with the mac, but not with the
computername, something like “pid” works.
If I use the gui, import with
very kind Diego,
I understand what you say.
But suppose I want to use local pf users for authentication and the TP-Link
controller Omada is compatible with pf.
Then a captive portal appears to the user connected via wifi, for whose
authentication Omada will contact a server radius (pf).
I
Hello,
I have a Tp-Link Omada wifi controller on which I want to implement a local
captive portal but with authentication through an External Radius Server.
In practice, the Omada one will be used for the captive portal and
PacketFence in radius enforcement will be used for the External Radius
Hello,
What informed the decision to remove WMI from the list of available
scanners and is there any way one can restore it in the latest version of
PF?
___
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
HI leonardo,
Im not sure what you're trying to do... but for plain radius authentication
you should use a simple radius server and that's it. In most cases, pf is
meant to be used to do 802.1x when acting as a radius server. PF
developers, please correct me if I'm wrong.
In most case, PF will
Hi Leonardo,
TPLink is not one of the supported vendors for wifi. Not sure what you're
trying to achieve. Would PF just be a radius server for authentication? Im
not 100% sure you can use it that way, as you'd still have to configure the
"switch" to be a particular model / brand / vendor
You can
Good afternoon,
I installed packetfence version 11.02 and I have the following problem:
On the android phone, when I connect to the open network with the captive
portal enabled and DHCP is activated correctly. The authentication web page
is not displayed. It does not allow manual access to the