I was having similar issues on a fresh install of packetfence 13.1 on
rocky linux using the RPMs.
I had trouble creating the isolation and registration sub-interfaces
(vlans), with the config not sticking on the configurator.. as such,
the haproxy-portal config was not having the correct
Hello Community,
I’m working with ARUBA 6000 Switch with firmware 10.13.1010 and Role mapping by
Switch Role.
It seems that Switch type “Aruba::ArubaOS_CX_10_x” send Radius attribute
HP-User-Role, instead of Aruba-User-Role while “Aruba Instant” type send the
good one.
However,
I’m running Packetfence 13.1 from ISO and have a registration VLAN. I am using
Merakis APs with radius role by VLAN. My test computer joins the network, get
a registration VLAN IP from the packet fence server, and it tries to open the
fqdn of the packetfence server and get a connection timed
Marco,
From what I’ve seen packet fence is used with a router in front of it, it
usually does not replace a router/firewall.
If you don’t have a DHCP server you would need to set a static IP address
https://wiki.debian.org/NetworkConfiguration
> On May 6, 2024, at 9:53 AM, Laboratorio Tronic
Hi Geert,
I have the same setup. On my Authentication Sources I have both configured with
rules. On prem AD I used with type LDAP with memberOf equals CN=,ou=…
LDAP notation.
On the source AzureAD I can use only the name.
Tahnks Martijn for responding.
Now that I know that I only can use groups created on Azure I can work from
there. It was just a bit confusing.
Currently struggling to setup SCEP with Azure and PF. Will try some more
but probably will need to ask for help in the future.
Have a nice day! Ik work
Hi,
I has on issue with Aruba Instant On 1930 24G 4SFP/SFP+ Switch
JL682A, all Windows Clientes received the suplicant configuantion but on my
Switch same times user is working and control port send DOMAIN\USER to
PacketFence Radius, but, on the most all
times the mac address show up with
Hi everybody,
I need to start learning about clustering and I have a general question:
The documentation and Daniel mention that a cluster consists of three nodes.
What is the reason for the number **three**?
Wouldn't a cluster be possible with two nodes, also?
Thanks, Chris
--
Olá meu companheiro, não sei se meu relato pode lhe ajudar, mas, foi o que
passei na minha virtualização com o Proxmox. Quando tentei instalar nas
primeiras vezes, não esperei tempo suficiente, a instalação ficou
incompleta, descobri que estava travado e reiniciei. Depois, consegui
reinstalar por