I am in the process of getting a Matrox millenium II 8Mb card which has been
running in a PC, and am wondering if I need to do any alterations to it to
get it to work in my 7500 200/604e?
Any help appreciated
Michael Clark
Auckland, New Zealand
--
PCI-PowerMacs is sponsored by
I just picked up a ZIF Carrier, it's the XLR8 MACh Speed G3 and I have a G3
233 processor to put in it. I bought it on Ebay and have no manuals the
speed chart on XLR8 web page is beyond confusing. I am trying to drop this
in a 7500 and help on the dip switches?
thanks!
--
Mark Rath, LSW,
In addition to Mr Jones advice, I can add the following based on my
experience with using Matrox cards made for PCs:
before you can flash the EPROM you may have to set a dip switch that
unprotects it.
there may also be a dip switch to enable VGA.
although there are extension and control panels
I shall have to have a look around for the utilties. Thanks
This card has a MAC output as well as the PC output (thats what interested
me in it), So we shall see how it goes soon.
Thanks
Michael Clark
Auckland, New Zealand
on 24/6/02 6:41 AM, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote:
In a message dated 6/23/02 11:28:31 AM, [EMAIL PROTECTED] writes:
The plug for the ethernet connection on this printer is new to me (as in not
like the back of the computers I have plugged into the switch), and I'd like
to use this as a network printer. What do I ask/look for?
An A-AUI
One thing that i think you will need is the control panel,
the one that is free.
Did you get that when you got the carrier?
Mark Rath wrote:
I just picked up a ZIF Carrier, it's the XLR8 MACh Speed G3 and I have a G3
233 processor to put in it. I bought it on Ebay and have no manuals
I want to put an IDE hard drive in a Power Mac 7200/200.
Can I do this and keep the origional SCSI HD as well?
Thanks for any help
Louie
--
PCI-PowerMacs is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Refurbished Drives |
-- Sonnet
It is a 7300 / 200 I want to put this in.
NOT a 7200 like the message says.
Sorry.
Louie
--
PCI-PowerMacs is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com | Refurbished Drives |
-- Sonnet PowerLogix Upgrades - start at $169 | CDRWs on
Hi Mark.
I just bought a MACh Speed ZIF carrier with g4/450 for my 9600. According to
my manual, at 50Mhz bus speed the carrier jumpers should be set 6,7,8,9 on.
You will need to install the software before you install the card itself.
-+-+-+-
RPM
Mark Rath wrote:
I just picked up a ZIF
I have a PowerCenter Pro 210 with a Sonnet 300MHz G3 card installed. I would like to
install a combo FireWire/USB card in my one remaining PCI slot. However, I've
already tried two, the Orange Micro OrangeLink Plus and the Sonnet Tango, and neither
worked. In fact, both hung up the computer
Last year I bought a Speedy bus accelerator from the guy who now sells
what is left of MicroMac. www.macupgradespecialists.com I used it on
my 8100, 7100 and 9600. There were drawings for ID of the 7100 and 8100
clock crystals, but I had to hunt around for the correct one on my 9600.
on 6/21/02 3:37 AM, NwDMA at [EMAIL PROTECTED] wrote:
I'm running 9.2.2 on a 7500 so it does work...but needs a little help.
Thanks John for this excellent Link.. I am also running OS 9.2.2 on my 7300.
Many thanks. Great article. Better than the on on Xlr8yourmac.com.
Lee
--
I've got a 9500 with a Mcallly PCI firewire card. I want to get an
external firewire
case and install an IDE burner. Do I still need to get a burner that is
supported by
Toast or will any burner work since its in a firewire case? I've seem
some external
firewire burners on ebay and my local
G3 CARDS:
In addition to the Sonnet (below)
consider the $170 XLR8 400/1MB cache at
www.MacGurus.com
and the Powerlogix 400/512 K cache for $99 at
www.otherWorldComputing.com
Also, there is a $130 400/1MB card somewhere.
just got a 7600 MotherBoard for my 7200/75
i need to get
14 matches
Mail list logo