Malcolm Cadman wrote:
SNIP
I think that we have all been there, and got the T-shirt ... :-)
If you are interested in computers / computing, then you tend to
accumulate lots of them over the years.
Very true . . . sometimes I think I have too many and but then again, I
couldn't
In message [EMAIL PROTECTED], Tony Firshman
[EMAIL PROTECTED] writes
Roy wood wrote:
In message [EMAIL PROTECTED], Tony Firshman
[EMAIL PROTECTED] writes
SNIP
It has been that way for many years I think. I am totally QL hardware
based, and I have been doing pretty well no business for years
Norman Dunbar wrote:
Dilwyn Jones wrote:
Wonder if anyone knows anything about this printer problem.
I have my son's Epson Stylus C64 set up here at the moment and it has
developed a problem - both indicators are blinking which indicates
(according to manual) print head unable to return to
In message [EMAIL PROTECTED], Rick Chagouri-Brindle
[EMAIL PROTECTED] writes
Malcolm Cadman wrote:
SNIP
I think that we have all been there, and got the T-shirt ... :-)
If you are interested in computers / computing, then you tend to
accumulate lots of them over the years.
Very true . . .
In message [EMAIL PROTECTED], Malcolm Cadman
[EMAIL PROTECTED] writes
In message [EMAIL PROTECTED], John Gilpin
[EMAIL PROTECTED] writes
Hi Dilwyn,
Try Viking Direct for your printer cartridges. They do a full range of
compatible units and the Epson stylus 880 Colour is on their list. Go to
Try Viking Direct for your printer cartridges. They do a full range
of
compatible units and the Epson stylus 880 Colour is on their list.
Go to
www.viking-direct.co.uk or ring free on 080042
I can vouch for Viking as being a useful and good supplier of
printer
cartridges. They are low
I have my son's Epson Stylus C64 set up here at the moment and it
has
developed a problem - both indicators are blinking which indicates
(according to manual) print head unable to return to home position,
but it seems to be parked in the home position!
Hmm, Dilwyn + Hardware = Problems :o)
However, I've been unable to use it as it was put away with a black
cartridge open in it. Once I had downloaded the correct drivers for
it, I
eventually got the CMY jets working, but the black has steadfastly
refused
to work - I eventually got it to product a single (dot) line for
about
In message [EMAIL PROTECTED], Dilwyn
Jones
[EMAIL PROTECTED] writes
Anyone got any suggestions or experience of this?
In my experience this is usually the end of the printer. It is
probably
the sensor on the rod that the print head moves on but is too
expensive
to repair
You are right. I
Robert said -
...any suggestions how to clear (trying propan-2-ol seems to have had
little effect (other than to get one dot working for minimal time), though
it does collect the other colours quite well - I dismantled the head
unit to get direct access to the jets...the C460 has a ...
hitchies wrote:
Robert said -
...any suggestions how to clear (trying propan-2-ol seems to have had
little effect (other than to get one dot working for minimal time), though
it does collect the other colours quite well - I dismantled the head
unit to get direct access to the jets...the
Dilwyn Jones wrote:
True, and although I will no doubt go down the emulation route at
some
point, for me, personally at least, the original hardware still has
its
place and so the two compliment each other - different types of fun,
you
could say. Actually, it has been fun digging out
12 matches
Mail list logo