Il 18/08/2017 10.06, Wolf via Ql-Users ha scritto:
So, if a sector number of a file would be higher than 65536, the error is
triggered. As each sector is 512 =Bytes long, after 65536 * 512 = 32Mib, it's
the end.
Thanks you Wolf
Andrea
___
But this means that 1 byte file will use 32Kb of hard disk space
:-)
I tried qubata v.3.01 on ROM but my old Qubide Hard Disk (created
with qubide rom 2..01) didn't boot
The Hard Disk is a 512Mb drive with 4
partitions of about 120Mb.
If I reinstall 2.01 ROM all run well.
Any
idea?
Andrea
QPC2
maximum RAM 128 Mb) I did not find any limits unless the size of the RAM
- I did not find limits on DOS devices from QPC2 except those of the
file system in use on Windows (NTFS) Specifically for QXL.WIN and QUBIDE
do anyone know the exact length limits and why? Thank you Andrea Carpi
Con Mobi
Thank You Jan
All clear!
So I need to verify my Qubide Hard Disk
with Partitio.exe
I don't remember with what block length I formatted
that partition
Andrea
Il 23.07.2017 17:21 Jan Bredenbeek via Ql-Users
ha scritto:
> The QDOS file system stores the file position in the
channel definition
on Windows (NTFS)
Specifically for
QXL.WIN and QUBIDE do anyone know the exact length limits and
why?
Thank you
Andrea Carpi
Con Mobile Open 7 GB a 9 euro/4 sett navighi veloce con 7 GB di Internet e hai
200 minuti ed SMS a 15 cent. Passa a Tiscali Mobile! http://tisca.li/Open7GB0617
Hi Peter
Il 23/06/2017 14.16, via Ql-Users ha scritto:
> My guess is
that replacing the QL motherboard could fix this issue.
> Unfortunately,
I have no Aurora system to try.
>
Is it possible to install QL-SD on
Aurora?
Although the ROM socket is different from that of the
QL?
Andrea
Con
Il 21/06/2017 16.28, Wolfgang Lenerz via Ql-Users ha scritto:
> Hi
Andrea,
>
>
> So, just to be clear : even with a normal Goldcard (not
SuperGoldcard), you cannot read/write/format disks on an ED drive. Is
that correct?
Correct:
A) Machine 1 = QL + GC + 2x ED drives +
ROMidsq, SMSQ/E v3.31
exists by using other hardware
such as HD floppy drives or DD floppy drives.
Andrea Carpi
Il
21.06.2017 09:25 Wolfgang Lenerz via Ql-Users ha scritto:
> As you
rightly point out, without the actual hardware this is going to
>
become practically impossible - not only to fix, but even just to
Il 28/04/2017 16.01, Marcel Kilgus ha scritto:
> I added that
feature at the request from Jens who paid for the development of the
8-bit driver. It was at a time when the SMSQ/E documentation was pretty
much unmaintained...
Is there a complete list of system variables in
SMSQ / E 3.xx?
In
Il 30/04/2017 21.01, Peter Graf ha scritto:
> But unfortunately it
kills the RomDisQ, just like 3.17. So I am not any
> further. Probably
need an even older version.
The bug, is not that it does not work with
Romdisq, but it does not read the external roms (all of theme).
SMSQ/E
versions
Il 30/04/2017 13.27, Bob Spelten ha scritto:
> Op Sun, 30 Apr 2017
00:57:46 +0200 schreef Peter Graf [1]:
>
>> Hi,
>>
>> was someone
else able to boot GoldCard SMSQ/E 3.31 on a real QL, not
>> Qemulator?
>>
>> Tried two machines in vain. GoldCard seems to work okay without
SMSQ/E.
>
Il 18/02/2017 14.55, Tobias Fröschle ha scritto:
Only on a side note and not really a problem:
MT.BAUD (and the equivalent SMSQ/E trap) is documented to return "ERR.BP" on an
unsupported baud rate.
"BAUD 9700" on QPC does, however, return "not implemented"
Tobias
Yes, but on QXL any baud
"GoldCard_256colours.bin"
(S)GC + Aurora mode screen driver (NO QL mode!)
Not sure why one would want to use that.
Cheers, Marcel
Thank you Marcel.
But I'm sure (i tested it) that GoldCard_256colours.bin doesn't work well on
Aurora.
It doesn't restart QUBIDE and you remain without hard
You can click on English to read English version :-)
Il 02/08/2016 19.19, Ralf Reköndt ha scritto:
Sorry, I can't read italian language.
- Original Message - From: "Giorgio Garabello"
Sent: Tuesday, August 02, 2016 2:41 PM
Subject: [Ql-Users] New articles
Some new articles on our
Thank You Marcel
Now it is possible to format DD floppy images
Very interesting the Alpha blending support
Andrea
Il 23/04/2016 22.09, Marcel Kilgus ha scritto:
Hello everybody,
QPC2 v4.04 has been released a few minutes ago, along with SMSQ/E
v3.26, which is also available from Wolfgang's
Il 02/04/2016 22.26, Marcel Kilgus ha scritto:
This is a bug in QPC and will be fixed in the next release. Thanks.
Marcel
Thank you, Marcel
Andrea
___
QL-Users Mailing List
I'm writing about an image file, not about a real floppy disk.
Andrea.
Il 02/04/2016 15.55, Gerhard Plavec ha scritto:
may be closing the "HD"-hole on the floppy can help
--
Am 02/04/2016 um 15:03 schrieb Andrea Carpi
Hi all
I'm trying to Format a 720K floppy image
Hi all
I'm trying to Format a 720K floppy image using QPC2 with these commands:
FLP_DRIVE 1,"C:\FLOPPY.IMG"
FORMAT 'FLP1_Disk1*D'
But I obtain a 1,44Mb image
Disk1 QDOS HD
2871/2880 sectors
Have you any idea?
Thanks.
Andrea
PS
QPC2 4.02
SMSQ/E 3.24
Meeting and conference very beautiful.
I thank all the participants for the beautiful day spent together.
Written on the train that takes me back home.
Andrea Carpi
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Il 17/02/13 12:56, Wolfgang Lenerz ha scritto:
Hi all,
v 1.05 is on the Website.
Apart from bugfixes, this allows you to hide the menu bar (type the basic
command JVAMBAR to get it back).
Could somebody confirm that Prowess is working ok in this version?
Yes Prowess now works.
Thanks you
Malcolm Cadman wrote:
I do not have a binary editor.
Perhaps someone else could perform the modification, and send me a copy ?
The software is dated 1997, so maybe the Beginners' Club can provide and
updated version too . The author is listed as Andrea Carpi.
I'm very happy to know
21 matches
Mail list logo
