Thank you Wolfgang!
On Sat, 17 Feb 2024, 13:09 Wolfgang Lenerz via Ql-Users, <
ql-users@lists.q-v-d.com> wrote:
> Hi all,
>
>
> QDOS & SMSQ reference guide v. 4.8 is out.
>
> I also re-made the manual for the Configurations standard, levels 1 & 2,
> with some assembler examples.
>
>
> This can
Hey Wolfgang!
So, SMSQmulator now has (some level of) SERial port support - that's great!
I can now test the QLUB Adapter with it :-)
Anything I should know about this experimental feature?
M.
On Sat, 17 Feb 2024, 12:58 Wolfgang Lenerz via Ql-Users, <
ql-users@lists.q-v-d.com> wrote:
>
> Hi
Hi Ian!
The card you are referring to would be the 'QXL'.
Those two 3.5mm sockets allow you to connect to the standard QL Network.
The DOS binary for the QXL includes the SMS(Q/e) binary that runs on the
card itself and the latest version can be found alongside the other SMSQe
distributions on
On this Father's Day (in the UK, anyway), I am pleased to announce the
availability of driver software that allows you to finally network the
Q68 with other QL-compatible machines via the standard QLNET ports.
The ready-to-run driver as well as the source code and a short
commentary are
/05/2018 13:15, Martyn Hill via Ql-Users wrote:
Thanks Wolfgang (and Jan via the Forum)
Having now found what looks like the DDB - taking in to account the
-$18 offset from the entry in the CDB - the resultant list of words
at offset ndt_ctab ($50) looks suspicious, thus:
50: 0
52
) lies at offset chn_drvr (=4) in the CDB - you can just PEEK_L
that. Be careful, however, the pointer there normally points to offset
iod_iolk (=$18) within the DDB, so all other offsets should be reduced
by that same amount.
HTH
Wolfgang
On 18/05/2018 22:01, Martyn Hill via Ql-Users wrote
Hi everyone
In the spirit of double-posting between here and the QL Forum :-) I
thought I'd ask my question here, too...
I'm continuing to explore the QL network across a range of platforms -
now with my refurbished QXL2 card (thanks, Derek!)
The bit-timings on the QXL under SMSQ/E v3.33
because it was HTML and my original replay wasn't published because it
came from the wrong sender address... so anyway, here it is once more:
Martyn Hill wrote:
OMGosh!
Do you know how long I have been staring at the serio/relio code -
but failed to see that potential flaw?
I shall test
Thanks Marcel!
On 27/02/2018 13:33, Marcel Kilgus via Ql-Users wrote:
Martyn Hill via Ql-Users wrote:
I looked again at the other serio vectored routines that themselves call
io_pend and determined that it was wise to preserve /their/ serio key in
d0 before resetting to 0 for io_pend
!) disassembly of V1.89, if thats of any
interest. It seems quite thorough and detailed, but Ive not tried to
reassemble it. Let me know where to send it if you want it.
Per
On 25/02/2018 15:51, Martyn Hill via Ql-Users wrote:
Hi everyone!
I'm looking to get a hold of the *source *for either
Thanks - just heard from DP via the Forum!
Can't wait to see this project come to fruition :-)
M.
On 25/02/2018 15:46, Graeme Gregory via Ql-Users wrote:
He did, you were a few hours late
G
On Sun, 25 Feb 2018, at 2:53 PM, Martyn Hill via Ql-Users wrote:
Hi Dave
...and, did you? I
Hi Dave
...and, did you? I was late joining the online Chat, so might have
missed it :-(
M.
On 20/02/2018 21:45, Dave Park via Ql-Users wrote:
Hi all,
I'll be making a new hardware announcement this Saturday 24th at 8pm UK
time.
To join in, see the videos/photos and ask questions, join
ious as hell :-)
Any takers?
Regards,
*Martyn Hill.*
--
"There are 10 types of people in this world. Those who understand binary and those
who don't."
___
QL-Users Mailing List
Hill wrote:
Hi WL!
Yes - that was just my typo :-)
Martyn Hill
Sent from my mobile - please excuse spelling errors...
On 29 Jan 2018 07:31, Wolf via Ql-Users <ql-users@lists.q-v-d.com> wrote:
sorry, this was
Hi everyone
Thanks to Wolfgang for his work on porting the WIN driver to QDOS and
merging with the SDC driver.
As a result, I am now able to mount a number of .WIN container files as
WIN1_, WIN2_ etc and in the process, ease the transfer of files from QPC
to my QL(s).
Loving it!
One
Is personal consumption legal in France ? :-)
On 24/01/2018 12:32, Wolf via Ql-Users wrote:
Hi,
Got anything cooking?
I've got my fingers in many pies that are a-cooking, but mostly for
in-house consumption.
Wolfgang
___
QL-Users Mailing List
for its (equivalent of) slave-blocks. E.g. for an
unexpanded QL of 128k, about 1.5MB container size seems to be the limit
before you take too much memory to run the machine effectively.
If only we could find another builder/supplier of the SD interface... :-)
Martyn Hill.
On 22/01/2018 13:41
, Martyn Hill wrote:
Hi Wolfgang!
For sure - no pressure - I can fix-up the issue on my SD-Card with a
little script in the meantime.
As for on which FS the issue takes-place; it shows itself on the
destination side (QubIDE/SD-Card image) - running FTYP on the source
QLWA/WIN source returns
ide?
Regards
Wolfgang
On 29/10/2017 22:12, Martyn Hill via Ql-Users wrote:
Hi list and especially Wolfgang
Not sure the best way to report the issue, but as per my recent
thread on the Forum (http://qlforum.co.uk/viewtopic.php?f=3=2146),
I seem to have uncovered an odd behaviour when copy
Hi list and especially Wolfgang
Not sure the best way to report the issue, but as per my recent thread
on the Forum (http://qlforum.co.uk/viewtopic.php?f=3=2146), I seem to
have uncovered an odd behaviour when copying directory structures from
WIN to a QL.BDI image file on SDC.
I know this
Good morning Derek
What a nightmare for you - we wish you a speedy recovery.
If there is still room left on your first 20 for Q68, could I ask to be
added (incl. the black case, but no need for the PS/2 splitter).
Regards,
Martyn.
On 20/10/2017 09:00, Derek Stewart via Ql-Users wrote:
making sure that nothing else will be broken at the same time, will be
worthwhile. So perhaps it's best to go with Martyn Hill's suggestion :
don't use LRESPR in a procedure/function..
On 20/02/2017 14:40, Martyn Hill wrote:
Ciao Giorgio
Some time ago, I observed and reported here a similar
Ciao Giorgio
Some time ago, I observed and reported here a similar sounding issue
whereby LRESPR would fail from within an SBasic PROCedure. Not all of
them, but some.
I resorted to loading the very same extensions outside of a procedure,
without issue.
Regards,
Martyn Hill.
On 19/02
Hi Bob
Just to confirm that I too have been unable to run DM5 on QPC (v4) and
saw oddities around the date before it would hang QPC.
I didn't investigate to the same depth, but it appears to match your
experience.
Martyn.
On 12/01/2017 15:35, Bob Spelten wrote:
Hi All,
I was trying to
1
Another note: The original QL allowed word-size divisors and dividends. while
SMSQ/E extended this to long integers. And the original QL manual even had an
example illustrating what you see here:
-5 DIV 2 { will output -3}
Tobias
Am 05.01.2017 um 16:27 schrieb Martyn Hill <ma
Hi everyone
Can anyone tell me the expected behaviour for the integer-divide
operator 'DIV' in SBASIC, when provided with a negative dividend/numerator?
My number-theory is a bit rusty, but I would have thought that, say, -1
DIV 10 should result in 0 (with remainder/MOD of -1).
Instead, on
latest version (downloaded form your site a
few weeks ago), but I corrected it and it then worked for me (on both
QEm and QPC).
As its not the primary topic of this thread, I can email you off-list to
discuss further, if you like...
Oh, and Happy New year to everyone!
Martyn Hill.
On 02/01/2017
your site a
few weeks ago), but I corrected it and it then worked for me (on QEm and
QPC).
As its not the primary topic of this thread, I can email you off-list to
discuss further, if you like...
Oh, and Happy New year to everyone!
Martyn Hill.
On 02/01/2017 14:54, Dilwyn Jones wrote:
I
Just to add my interest to getting hold of a reasonable soft-copy of
this classic...
The copy I have is mostly illegible (though regularly trawled-through).
eBay has hard-copies on sale, but they're pretty expensive!
Martyn.
On 17/06/2014 13:10, Lee Privett wrote:
The was some move awhile
like to see is it continue!
All the best and thanks again!
Martyn Hill
On 20/03/2014 20:12, Norman Dunbar wrote:
Evening all,
the latest news from the Assembly language mailing list is:
1. Kindle version now available.
Issue 1 of the QL Today Memorial Assembly Language Mailing List
irregular
Congratulations Marcel, first and foremost for your new arrival!
And thank you for continuing to support QPC!
Martyn.
On 31/01/2014 01:11, Marcel Kilgus wrote:
Hello everybody.
I have mentioned that I intended to make QPC2 available and free for all
for some time and the first fruit of this
Hi everyone
On an entirely different topic, and perhaps naively, can I ask how to
query a window in SBASIC to discover the current Paper/Strip and Ink
settings - specifically after using the COLOUR_PAL command in QPC2?
My aim is to (arbitrarily) manipulate the colours on a window that's
Thank you, Marcel!
Yep - I use full-screen most of the time on my laptop.
Martyn Hill
On 10/07/2013 14:18, Marcel Kilgus wrote:
Surprise! It only took 6 years, but finally there is another official
beta of QPC ;-) Don't hesitate because it's called a beta, it's very
stable, I only want
Hi all
Interesting video - I found the following page on Amazon (UK):
http://www.amazon.co.uk/Motorola-Lapdock-for-ATRIX/dp/B00519L43M
85 quid - only 10 left.
Regards
Martyn.
On 08/01/2013 19:57, Tony Firshman wrote:
Mororola Atrix
--
There are 10 types of people in this world. Those who
On 14/07/2011 20:05, ql-users-requ...@lists.q-v-d.com wrote:
On 13/07/2011 18:16, pjwitte wrote:
On 13/07/2011 17:48, pjwitte wrote:
On 13/07/2011 14:10, Martyn Hill wrote:
Hi everyone
Something got lost in translation.. Heres a tidier version
Per
SBslave
More than somethink
Hi everyone
As part of an on-going SB Editor project in QPC/SMSQ-E, I am reseraching
ways to queue SB commands in to a daughter SB job.
Extensions such as SG's QUEUE% or Turbo's TYPE_IN don't quite work for
this purpose as I need to queue the commands from another SB (eventualy
Turbo'd) job
need to know (beyond satisfying my curiosity) is:
a) Can I rely on the pointers above - from peek_l(\\...) - to find
the actual table data?
b) Is there a SBASIC job-size stored in any _one_ place (as opposed
to adding up the 'Length' bits above)
Thanks for any insights ;-)
Martyn Hill
Dear all
Thank you for all your replies! I really thought it was a naive question
in the first place, but reading your replies am glad I asked it!
For the time being, invoking the Button_Sleep routine from a Hotkey, I
am successfully putting the active job to sleep (whatever it is,
could
tame SBasic windows in this way.
Have I missed something obvious, or is it necessary to develop a
standalone app using the PE tools available just to achieve this?
Thanks for any ideas.
Martyn Hill
London.
___
QL-Users Mailing List
http://www.q-v
that the SB source of their MasterBasic
software could be made available - I'd very much like to see how they
designed this.
Any ideas?
Regards,
Martyn Hill, London
A happy QPC user...
--
Dear Davide and all
Thank you for your responses. I shall follow-up directly
very much like to see how they
designed this.
Any ideas?
Regards,
Martyn Hill, London
A happy QPC user...
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Phew! that's better...
Martyn Hill wrote:
Dear list
Just wanted to verify whether the list has been quiet since 5th
December, or perhaps my access to the daily digests has expired as I
haven't received anything since then.
Anyone?
Regards,
Martyn Hill
Dear list
Just wanted to verify whether the list has been quiet since 5th
December, or perhaps my access to the daily digests has expired as I
haven't received anything since then.
Anyone?
Regards,
Martyn Hill.
___
QL-Users Mailing List
http
Hi
Could anyone using the really useful Qascade care to share their
qascade_rc config files here?
Jonathan's examples are fine in themselves, but I'd like some more
examples, particularly of SBAS/ETHG SBASIC usage.
Regards,
Martyn Hill.
___
QL
a show-stopper - I can simply move my LRESPRs outside a
defined proc, but thought that there might be at least one of you who'd
be marginally interested (Marcel?)
Oh, I'm running QPC 3.34, SMSQ/E 3.13 HBA with 16MB RAM.
Regards,
Martyn Hill
London.
Martyn Hill wrote:
Hi again
Could anyone say
Hello again
Thanks for that - I might therefore go back to running QPC in MS Virtual
PC, as Wolfgang suggested.
Only trouble is that I found QPC a little unstable in that VM. Actually,
most any emulator in MS VPC seemed to go funny.
Regards,
Martyn Hill
London
Martyn Hill wrote:
Hello
Hello once again
Thanks for the replies.
So, it's more a case of hiding Job 0, than trying to bring the QDT +
wallpaper to the top.
Looks like I need to fork-out some cash for QPAC2 after years of trying
to do without it!
Regards,
Martyn Hill
London.
Martyn Hill wrote:
Hi *
I have
is brought to the top, just as one might click 'Show Desktop' in
Windows.
Any advice? I'd like to use QDT more (as well as see it continue to be
developed!).
Regards,
Martyn Hill
London.
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
the next statement, but it
simply stops after merging the DEFs.
I'm running this in QPC. Is this expected behaviour? I read in the
manual that MRUN in a program _should_ continue with the next runnable
statement in the program.
Regards,
Martyn Hill
London
emulated environment so that I
could nip in and out without a complete QL restart...
I should probably send this directly to Marcel, but see that he reads
this list...
Regards,
Martyn Hill
London
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk
in to the QL
community that I've enjoyed for so long!
Regards,
Martyn Hill, London.
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
51 matches
Mail list logo
