I'm putting Echolink on my rptr. I wanted to run the Echo Time program
also, but found out from KH2D that it is no longer available, since he
took a lightening strike last July on his system/server or something.
From what I gather, he has no plans on reactivating it. Now i'm
looking for
Look at the help files accompanying the CPS program, especially the ACCESSORY
Configuration tab, ACCESSORY Connector for pin definitions and the ACCESSORY
Pins Tab. Also look at the manuals for the i20 repeater controller and the
Z340 Comunity repeater controller.
One of the options on
Looks like this is now called EchoTime TTS Plus??? Available now.
At 23:08 10/13/2008, n3dab wrote:
I'm putting Echolink on my rptr. I wanted to run the Echo Time program
also, but found out from KH2D that it is no longer available, since he
took a lightening strike last July on his
If you find out how to do that, let me know!
I gave up and switched to Tait TM8110 it allows ctcss injection.
We are using a pair of Motorola CDM-1250 UHF mobiles, 403-470 split, for our
UHF repeater along with an Arcom RC-210 controller.
We want to strip the PL tone when CW and / or
Yes, it is called Echo Producer.
On Tue, Oct 14, 2008 at 2:08 AM, n3dab [EMAIL PROTECTED] wrote:
I'm putting Echolink on my rptr. I wanted to run the Echo Time program
also, but found out from KH2D that it is no longer available, since he
took a lightening strike last July on his
Has anyone configured a away to connect two of these radios together
for a repeater or crossband.
Hi Doug,
I use Echotime on my system and works very well.
I can send you the files by e-mail if you want.
73
Eric
Give me your e-mail
_
De : Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] De la part de n3dab
Envoyé : 13 octobre 2008 23:09
À :
Thanks, Milt. I found that yesterday and it appears to be working.
On Tue, Oct 14, 2008 at 8:25 AM, Milt [EMAIL PROTECTED] wrote:
Look at the help files accompanying the CPS program, especially the
ACCESSORY Configuration tab, ACCESSORY Connector for pin definitions and
the ACCESSORY Pins
I wasn't clear about that...the motivation for rebuilding it is that
most of the equipment at the voting sites is gone. Just one rcv
cavity, and the antenna system at one site remain. I don't even know
what was installed there. Also, only one of these sites is still
available. I think we'll run 3
Hi Doug
I run Echotime now and it is a good program. There were 2 versions, the
first which was free and the second which had better voices and was a paid
program.
Now there is a new program you can get from the EchoAddOns site that is even
better. It is EchoProducer. It has a ton of options
Any cleaver way to run Echolink and Echostation at the same time? or
add repeater controller abilities to Echolink?
On Tue, Oct 14, 2008 at 6:58 AM, G Shaw [EMAIL PROTECTED] wrote:
Hi Doug
I run Echotime now and it is a good program. There were 2 versions, the
first which was free and the
I got to looking in the schematics, and was going to try injecting the tone
at U0221, pin 40, which is supposed to be the MOD IN, as it's labeled, but
it's really the audio output (after all filtering, etc) that goes to the RF
stage.
Instead of doing that, I found in the software that if you
tedsims wrote:
I wasn't clear about that...the motivation for rebuilding it is that
most of the equipment at the voting sites is gone. Just one rcv
cavity, and the antenna system at one site remain. I don't even know
what was installed there. Also, only one of these sites is still
available.
Thanks to all for the suggestions: I will check out the Echoaddons and Echo
Producer first. (thanks Ken and Glenn) Eric thanks for the offer but as
mentioned an earlier post i have the files,but it takes KH2D's sytem to make
them work . Part of the Registration process for the TTS+ and he
I have two Motorola Radius GM300 VHF mobiles (M33GMC29C2AA). My radios as
used, but their condition is as new. I will provide photos upon request.
These are 16-channel radios. No separation kits. Would like to trade
even-up for two M43GMC radios.
In order to save bandwidth, please
Thanks to all for the suggestions: I will check out the Echoaddons and Echo
Producer first. (thanks Ken and Glenn) Eric thanks for the offer but as
mentioned an earlier post i have the files,but it takes KH2D's sytem to make
them work . Part of the Registration process for the TTS+ and he
hi all
how can i search on Ebay for the Master 2 repeater??
i have try many combinaison,,,no luck.
i need the SOR card (PL19D417271g1)and the 10 volts regulator card.
i need to repair the repeater fast,,,snow will come over the site in 3 weeks max
73/s
gervais ve2ckn
Spell it mastr II like it says on the case? I have searches for mastr II,
master II, master 2, etc. since one never knows how it will be listed. I
think there were some good quick fixes described earlier for the 10v
regulator, sure you need the whole card?
From:
gervais fillion wrote:
hi all
how can i search on Ebay for the Master 2 repeater??
i have try many combinaison,,,no luck.
i need the SOR card (PL19D417271g1)and the 10 volts regulator card.
i need to repair the repeater fast,,,snow will come over the site in 3
weeks max
73/s
gervais
NOD32 3522 (20081014) __
Ce message a ete verifie par NOD32 Antivirus System.
http://www.nod32.com
Yes Daron,i need the whole card,mine has been stolen !!
Ge parts are becoming rare here,i still have an old motorola micor
here,receiving in uhf tx is low split vhf i may modify it for ham use.
73/s Daron
gervais ve2ckn
To: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Tue, 14 Oct
Ok Ed
i will try your suggestion
thanks
Gervais ve2ckn
Type in the search bar UHF repeater or VHF repeater And look at all
that pop up until you see what your looking for !!!
--
Doug
N3DAB/WPRX486/WPJL709
gervais fillion [EMAIL PROTECTED] wrote:
=
hi all
how can i search on Ebay for the Master 2 repeater??
i have try many
James,
You can program a pin on the accessory connector to do exactly what you
want, and even make it active high or active low to be compatible with your
controller. It is better to let the radio do the encoding and decoding of
CTCSS tones, since you have the reverse-burst STE built-in- a
Ben,
I believe that the best solution is to use a normally-open thermoswitch
mounted to one of the heatsink fins. My choice is Digi-Key 317-1094-ND,
about $7, which closes at 50 degrees Celsius (122 degrees Fahrenheit). This
setting ensures that the fan does not run needlessly, but will kick in
Thanks, Eric.
On Tue, Oct 14, 2008 at 8:34 PM, Eric Lemmon [EMAIL PROTECTED] wrote:
James,
You can program a pin on the accessory connector to do exactly what you
want, and even make it active high or active low to be compatible with your
controller. It is better to let the radio do the
Bill,
I assume you are following the instructions for complete alignment as found
in LBI-3615, here:
www.repeater-builder.com/ge/lbi-library/lbi-3615d.pdf
The instructions include advice to ensure that the exciter is completely
aligned first, and a reminder to allow the PA to completely warm up
Hi Dennis,
Can you name a source for the Service Manual for any
of the Midland Equipment that has the 71-5400 repeater
amplifiers? I've also got the VHF version... I could
use them if I could hook them up...
thanks in advance for your reply.
cheers,
skipp
Dennis Bridgeman [EMAIL
Gervais,
I usually type just GE in when I'm searching. Some times gives you more than
what your looking for. However parts aren't always listed as mastr 2. Doing
it this way gives you everything.
Mike KA2NDW
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL
Hi Savy,
Specific to the TK-760g and TK-860g mobile only:
Buy the Kenwood KCT-19 option cable and install it per the
service manual (just plug it in properly). I stock them if you
can't find one local to you.
For the Kenwood TK-860g Radio
KCT-19 Pin 4 Receiver Audio Input
KCT-19 Pin 5
---If your having a problem, maybe you might want to call them.
Sara Gore...800-725-1426 xt 237
.
In Repeater-Builder@yahoogroups.com, kb5vjy [EMAIL PROTECTED] wrote:
Is anyone else having a problem getting to ICS's Website? I needed to
download the basic manual.
73 de Joe KB5VJY
What does Sara Gore at ICM have to do with ICS Controllers?
Shorty, K6JSI
--- In Repeater-Builder@yahoogroups.com, Randy [EMAIL PROTECTED] wrote:
---If your having a problem, maybe you might want to call them.
Sara Gore...800-725-1426 xt 237
.
In Repeater-Builder@yahoogroups.com, kb5vjy
32 matches
Mail list logo