Looking for MSR2000 vhf repeater, preferably with continuous duty
amplifier suitable for 147.18.
Also interested in receiver and excited modules, both VHF and UHF, for
spares, and links. May be interested in other MSR2000 modules, parts,
cabinet hardware. etc.
Of course I'm looking for manuals!
[EMAIL PROTECTED] wrote:
My 2 cents worth.
Many years ago I had a 200' run of LDF5-50 installed by a
professional on a 900'tower (rptr at 700' antenna at 900') about a
week later we noticed that the TR performance dropped considerably.
Personal inspection revealed that water or condensate
Cort Buffington wrote:
For you repeater elmers out there: If we don't find a problem with the
feedline on the Telewave antenna, does this make any sense? Telewave
also HIGHLY recommended that the F10 isn't a good fit for this
installation due to its extremely narrow vertical beamwidth,
Glenn,
Regency Land Mobile, Inc., also known as RELM, produced mobile radios
under both Wilson and Regency brand names. I looked up ATE 9PLWS20 on the
FCC OET web site, and found that the radio is a very low power 800 MHz
transceiver. I wonder if the trailing 1 is actually an R, because the
FCC
Get Skype and call me for free.
Hi All,
We have been offered a Kenwood TS-430S as a radio for use in our repeater
system.
I have worked with using a TS-440S as a HF remote, using a SSB Smart Squelch
for the COS trigger.
I am however in the need of a trigger for when it is used as a FM
I have the following repeaters for sale.
Three (3) units - all identical and set up the same, as follows:
MSR2000 C73GSB VHF repeater. 100w int duty PA, in 29 compa-
station cabinet. Professionally wired to a brand new never used Arcom
RC-210 repeater controller in rack mount case with
Cort,
It sounds like a mechanical problem somewhere, as others have mentioned.
If you can get your hands on a TDR or similar device to sweep the new
antenna and feedline on top (using calibrated 50 ohm load on the
feedline, and then adding the antenna on for the next test), you'll
probably
I'll keep the list posted on what we find. I'm playing it all by the
numbers, and I don't have access to a TDR. Calculate and measure, one
step at a time is my plan. Sooner or later if we don't find a problem,
we plan to replace the Telewave F10 with another DB420 we have and if
that works
Does anybody know anything about these folks? Ran across them by accident
yesterday.
Hi
I badly need a users manual at the moment for the 4015 Stabilock
service monitor, and for future use I'd be happy to find a service
manual as well. If anybody has one or has any idea where to source
them please let me know.
Martin HB9TZW
10 matches
Mail list logo