At 08:57 PM 06/20/10, you wrote:
Thanks to all who replyed to my question on the Astron.
Mike, I did not check the box on the 404 Error, but Chuck sent me a
copy of the schematic and when I returned to the site they all opened.
Thanks for the heads up on the Astron Page, I am re-reading as I
: Re: [Repeater-Builder] Astron RS50 Power Supply
At 08:57 PM 06/20/10, you wrote:
Thanks to all who replyed to my question on the Astron.
Mike, I did not check the box on the 404 Error, but Chuck sent me a
copy of the schematic and when I returned to the site they all opened.
Thanks for the heads up
At 05:40 AM 06/21/10, you wrote:
With all the excitement I missed something. Can you explain this for me?
4) Add the compensation cap. Just remove the 723 chip from it's socket
and solder it across the back of the board, then reinstall the chip.
What is the compensation cap?
It's a
-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Astron RS50 Power Supply
Hey you still owe me 3 # bucks for sending you a Uniden key!
Hope the whole world knows know! you just blew me
off?!!! it was over a year ago at least! sent
you several emails. guess if you
Also our above mentioned power supply which operates our 2
Meter and 440 Repeaters and a low power link started humming
yesterday. A trip to the tower showed that the two large
wires coming from the Pass Transistors to the post on top of
the regulator board and into the 1000 Uf
Jeff DePolo wrote:
Everyone is entitled to make an ass out of himself now and then, but you're
abusing the privilege...
Now that's funny...
BTW: I had set the dudes posting privileges to Moderated, but Scott
decided to toss him - - Scott wins.
Onward and Upward.
Kevin Custer
My guess is that it was a heat problem due to a
faulty solder joint on the pass transistors
socket.
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On
Behalf Of James
Sent: Sunday, June 20, 2010 2:22 PM
To:
...@spiceisle.com wrote:
From: Leroy A. M. Baptiste leroybapti...@spiceisle.com
Subject: RE: [Repeater-Builder] Astron RS50 Power Supply
To: Repeater-Builder@yahoogroups.com
Date: Sunday, June 20, 2010, 2:38 PM
My guess is that it was a heat problem due to a
faulty solder joint on the pass
Those older? units actually have an out of phase tap on the Xfmr, 10v? or
somethin! forget what color the leads are, can check. Believe it or not I have
brought several of them back to life by just soaking the transformer in varnish
and letting it dry of course! That feedback winding oscillates
-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Astron RS50 Power Supply
Those older? units actually have an out of phase tap on the Xfmr, 10v? or
somethin! forget what color the leads are, can check. Believe it or not I
have brought several of them back to life by just soaking
At 11:22 AM 06/20/10, you wrote:
Hi Guys,
I am trying to download a schematic on this site for the RS50M Power
Supply and keep getting a 404 Error on each attempt on all the
supplies. Any ideas?
Did you use the email link on the 404 page to tell the guys at
repeater-builder?
I just checked the
-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Astron RS50 Power
Supply
At 11:22 AM 06/20/10, you wrote:
Hi Guys,
I am trying to download a schematic on this site
for the RS50M Power
Supply and keep getting a 404 Error on each
attempt on all the
supplies. Any ideas?
Did you use the email
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com]on Behalf Of Leroy A. M.
Baptiste
Sent: Sunday, June 20, 2010 5:28 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Astron RS50 Power Supply
I must have
...@yahoogroups.com] On Behalf Of Leroy A. M. Baptiste
Sent: Sunday, June 20, 2010 3:28 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Astron RS50 Power Supply
I must have missed it, but what is the deal of not
connecting the negative side of an Astron Supply
to case
fot you to bring it
on, Smart A..
--- On Sun, 6/20/10, Eric Lemmon wb6...@verizon.net wrote:
From: Eric Lemmon wb6...@verizon.net
Subject: RE: [Repeater-Builder] Astron RS50 Power Supply
To: Repeater-Builder@yahoogroups.com
Date: Sunday, June 20, 2010, 8:07 PM
Leroy,
The problem
60 cyc hum!
--- On Sun, 6/20/10, Leroy A. M. Baptiste leroybapti...@spiceisle.com wrote:
From: Leroy A. M. Baptiste leroybapti...@spiceisle.com
Subject: RE: [Repeater-Builder] Astron RS50 Power Supply
To: Repeater-Builder@yahoogroups.com
Date: Sunday, June 20, 2010, 6:27 PM
I must have
This forum can well do without this spittle drooling moronic crap.
In a message dated 6/20/2010 5:49:23 P.M. Pacific Daylight Time,
kevinvalent...@sbcglobal.net writes:
I really have kept an eye onLemon$ He is very smart but loves to say on
just repeated specs and letting you know where
That is right!
--- On Sun, 6/20/10, cruising7...@aol.com cruising7...@aol.com wrote:
From: cruising7...@aol.com cruising7...@aol.com
Subject: Re: [Repeater-Builder] Astron RS50 Power Supply
To: Repeater-Builder@yahoogroups.com
Date: Sunday, June 20, 2010, 8:58 PM
This forum can well do
Yeah. exactally what i said in s nutshe! Oscillation in thelinear
transformer!
--- On Sun, 6/20/10, kevin valentino kevinvalent...@sbcglobal.net wrote:
From: kevin valentino kevinvalent...@sbcglobal.net
Subject: RE: [Repeater-Builder] Astron RS50 Power Supply
To: Repeater
Subject: Re: [Repeater-Builder] Astron RS50 Power Supply
To: Repeater-Builder@yahoogroups.com
Date: Sunday, June 20, 2010, 6:23 PM
At 11:22 AM 06/20/10, you wrote:
Hi Guys,
I am trying to download a schematic on this site for the RS50M Power
Supply and keep getting a 404 Error on each attempt
oops, :Q
--- On Sun, 6/20/10, kevin valentino kevinvalent...@sbcglobal.net wrote:
From: kevin valentino kevinvalent...@sbcglobal.net
Subject: Re: [Repeater-Builder] Astron RS50 Power Supply
To: Repeater-Builder@yahoogroups.com
Date: Sunday, June 20, 2010, 9:21 PM
Hey you still owe
! Wa6ilg, so impressed, no code!
wannabie!!! yes you are!!!*
--- On *Sun, 6/20/10, Mike Morris /wa6...@gmail.com/* wrote:
From: Mike Morris wa6...@gmail.com
Subject: Re: [Repeater-Builder] Astron RS50 Power Supply
To: Repeater-Builder
/*
wrote:
From: Mike Morris wa6...@gmail.com wa6ilq%40gmail.com
Subject: Re: [Repeater-Builder] Astron RS50 Power Supply
To: Repeater-Builder@yahoogroups.comRepeater-Builder%40yahoogroups.com
Date: Sunday, June 20, 2010, 6:23 PM
At 11:22 AM 06/20/10, you wrote:
Hi Guys,
I am trying
Grazi !
In a message dated 6/20/2010 6:57:38 P.M. Pacific Daylight Time,
n3...@repeater-builder.com writes:
I've had enough of this guy. He's gone.
You're all welcome.
Scott - List Co-Owner
Scott Zimmerman wrote:
I've had enough of this guy. He's gone.
You're all welcome.
Scott - List Co-Owner
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Thank you...
Ed Yoho
W6YJ
At 06:21 PM 06/20/10, you wrote:
Hey you still owe me 3 # bucks for sending you a Uniden key! Hope
the whole world knows know! you just blew me off?!!! it
was over a year ago at least! sent you several emails. guess if you
can't afford a couple bucks then you should not to try
26 matches
Mail list logo