[Repeater-Builder] Re: MASTER II TO RC-210

Hi Group, Perform a Search on www.youtube.com for GE Mastr A guy from Allentown PA has a good videos on what it takes to convert a mobile and do the controller install. Very informative Ryan n3ssl

Re: [Repeater-Builder] Best coax for marine use

He'll get as far or further than the hundreds of RG58 installations I've seen. I was at least attempting to offer a helpful opinion rather than trolling.  Eric Lowell Eastern Maine Electronics Inc. 48 Loon Road Wesley ME 04686 eme@starband.net www.satnetmaine.com 207-210-7469

Re: [Repeater-Builder] Re: Cheap: Canadian Marconi Repeater.

va...@rogers.com wrote: I'll be in probably next Tuesday afternoon, Tedd... Hi Keith, Did you want the repeaters as well? A couple guys from VE2 land were interested, but as soon as they saw your post thought they were sold. Thanks, Tedd Doda, VE3TJD Lazer Audio and Electronics

RE: [Repeater-Builder] Spectra Audio Popping after Capacitor replacement

Yes, you are correct. The hear clear is only used in the 900 mhz spectra. Changing the CAPS should help especially aroung the audio amp chip. I have not had any issues with the VHF Spectras giving a popping sound except I had to replace the audio amp chip in one. It was fun to do but at the same

RE: [Repeater-Builder] $2000 Motrac era repeater!

Hi John, Now that is funny, I got quite a chuckle out of that post. I hope you and your family have a happy Thanksgiving. Mike Mike Mullarkey K7PFJ _ From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of JOHN MACKEY Sent:

[Repeater-Builder] Another unknown duplexer

This set of cans has been in our club since before I was involved. None of us seem to recall where this thing came from or who made it. Does anyone recognize this one? http://groups.yahoo.com/group/Repeater-Builder/photos/album/700689718/pic/list The cavities are about 4 in diameter and are

RE: [Repeater-Builder] Another unknown duplexer

Well I haven't seen these cavities in some time. They look like an early version of the Fred Voight series of filters. They seemed to work with a bit more loss than your commercial Sinclair 6 can Bp/Br cans. Mike Mike Mullarkey K7PFJ _ From:

Re: [Repeater-Builder] Another unknown duplexer

At 11/25/2009 06:50, you wrote: This set of cans has been in our club since before I was involved. None of us seem to recall where this thing came from or who made it. Does anyone recognize this one?

[Repeater-Builder] DB-224 Phasing Harness

Good morning. I recall some discussion from the group about obtaining a replacement wiring/phasing harness for the DB-224. I am trying to help a group using one of these antennas that operates in the 150 - 159mhz band. Can anyone offer some information about obtaining the phasing harness?-

Re: [Repeater-Builder] Another unknown duplexer

Don't know where they came from but our club has one just like it on a 100w MSF5000. Works very well Chris N9LLO In a message dated 11/25/2009 9:52:05 A.M. Eastern Standard Time, p...@chargertech.com writes: This set of cans has been in our club since before I was involved. None

Re: [Repeater-Builder] 900mhz MASTR II Parts

Hi, what do you want for a 900 MHz rcvr?Also is there a low pass filter available from one of the transmitters or does GE use an internal one like on the Mastr II? Reid W6MTFQuoting n0fpe : Ok I am going to start parting out the 3 900mhz MASTR II repeaters I

RE: [Repeater-Builder] $2000 Motrac era repeater!

I hope your thanksgiving is also well! -- Original Message -- Received: Wed, 25 Nov 2009 06:49:22 AM PST From: k7...@skybeam.com To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] $2000 Motrac era repeater! Hi John, Now that is funny, I got quite a chuckle out

RE: [Repeater-Builder] $2000 Motrac era repeater!

Just surprised it did not end up on Ebay --- On Wed, 11/25/09, JOHN MACKEY jmac...@usa.net wrote: From: JOHN MACKEY jmac...@usa.net Subject: RE: [Repeater-Builder] $2000 Motrac era repeater! To: Repeater-Builder@yahoogroups.com Date: Wednesday, November 25, 2009, 12:50 PM I hope your

RE: [Repeater-Builder] Spectra Audio Popping after Capacitor replacement

-Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of tahrens301 Sent: Tuesday, November 24, 2009 2:43 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Spectra Audio Popping after Capacitor replacement Hi

[Repeater-Builder] Re: 900mhz MASTR II Parts

NO LONGER AVAIABLE AT THIS TIME --- In Repeater-Builder@yahoogroups.com, n0fpe n0...@... wrote: Ok I am going to start parting out the 3 900mhz MASTR II repeaters I have. I will have high power PA's 24volt ya know transmitters, receivers, GETC controllers who wants these?. I think I

RE: [Repeater-Builder] Spectra Audio Popping after Capacitor replacement

Hi Mike, Thanks for the info. Yes, I've cleaned it up good... I use a q-tip with a baking soda/water combo, then wick solder on the pad till it flows... sometimes gotta scrape a shiny spot first. Then soldersuck the pad clean up with wick. Then another qtip with lacquer thinner (contains

Re: [Repeater-Builder] Another unknown duplexer

I've never seen a set like that, but the cans look like they are made out of rigid coaxial line, the kind used for high power FM and TV broadcast stations. I'm guessing that is what it is made out of because of the flange on the top. I'm curious, what is the thickness of the outer walls on

Re: [Repeater-Builder] $2000 Motrac era repeater!

I have 3 Motorola high band transmitters of anyone is interested. these were paging transmitters on 152.240 and put out 275 watts I believe. Any of these could be teamed up with a vhf receiver to make a repeater. Now they have 70mhz receivers in them with the necessary controls to make them

Re: [Repeater-Builder] Another unknown duplexer

I didn't measure the wall thickness. They are relatively thin and lightweight, while the flange is thick. Definitely aluminum or some other very lightweight metal. - Original Message - From: Joe k1ike_ Subject: Re: [Repeater-Builder] Another unknown duplexer I've never seen a set

[Repeater-Builder] Re: $2000 Motrac era repeater!

--- In Repeater-Builder@yahoogroups.com, JOHN MACKEY jmac...@... wrote: http://portland.craigslist.org/clc/ele/1477806751.html Well in this case. I have a Motorola Micor Base repeater ready to go on 145.270 100watts with Sinclair duplexers for 5000.0 ?!?! ;) I will throw in the Zetron

[Repeater-Builder] pre-amp placement

Hi, I have now read two different things about where to put the pre-amp. One says before the Bandpass and one after. What I have now is the 6 can duplexer is hooked to the bandpass and then on the other side the pre-amp is connected and then a cable goes from preamp to radio. The other

Re: [Repeater-Builder] pre-amp placement

If the preamp has helical resonators on the input, it should not matter. If the preamp does not have preselection, after the bandpass filter, unless you like the intermod that will be generated in the preamp. 73 Glenn WB4UIV At 10:46 PM 11/25/2009, you wrote: Hi, I have now read two different

Re: [Repeater-Builder] Re: $2000 Motrac era repeater!

I'll undercut you and give the bargain basement sale of a Micor repeater ready to go on the 2 meter channel of choice with Zetron 38max controller duplexer for $4500.00!! -- Original Message -- Received: Wed, 25 Nov 2009 06:49:06 PM PST From: kc7stw kc7...@yahoo.com To:

Re: [Repeater-Builder] Re: $2000 Motrac era repeater!

the stupidity on craigslist and ebay never ceases to amaze me :) - Original Message - From: JOHN MACKEY jmac...@usa.net To: Repeater-Builder@yahoogroups.com Sent: Wednesday, November 25, 2009 11:35 PM Subject: Re: [Repeater-Builder] Re: $2000 Motrac era repeater! I'll undercut you

[Repeater-Builder] Re: setting up a repeater for dispatch

Most (even so-called Public Safety ready) IP linking systems DO NOT have ANY way to notify the dispatcher that their transmissions are NOT going out over the air, or that the link coming in from the field radio units is down. ... and most regular conventional Public Safety Systems do

[Repeater-Builder] Re: pre-amp placement

Hello John, W3ML w...@... wrote: Hi, not since high school... :-) I have now read two different things about where to put the pre-amp. Only two? One says before the Bandpass and one after. What I have now is the 6 can duplexer is hooked to the bandpass and then on the other