Jeff...
Something similar to this?
http://www.ccdx.org/zedyx/mods/db212.htm
WebMaster for the Cheshire County DX ARC, Located at:
http://www.ccdx.org
See Ya, Joel
wa1...@ccdx.org
or
WA1ZYX K1XX DxCluster Node (Amateur Radio)
That's pretty good. But what I had were the actual cutting dimensions for
the elements, cables, etc. right from Decibel, similiar to what I posted for
the Phelps-Dodge/Celwave dipoles. I know I have it *somewhere*...
--- Jeff
-Original Message-
I'm collecting info about using a Tait T800 series 1 low band repeater as a ham
6m repeater, but info is very scarce. I do not own such a repeater yet but know
where I'd get one in case I see that there is some hope for success.
These are the problems one will most likely run into:
First of
Something worth mentioning about the info on the site that was posted - the
35-ohm matching sections need only use a single 1/4 wave piece of cable,
then the remaining length of that run can be 50-ohm cable.
Chuck
WB2EDV
- Original Message -
From: Jeff DePolo j...@broadsci.com
To:
Tom,
Please be advised that boating laws do not specifically require a battery to be
in a box. What they do require is a battery to be securely mounted and the
non-grounded terminal covered. Most folks interpret that as a battery box or
bracket to old the battery in place. Most folks
In the past, I have used marine type battery boxes for radio installations
and I usually vented it outside by cutting a hole in the battery box top and
affixing a flexible vent line to the outside.
This is what I was thinking of doing. Glad to see someone else had the same
idea.
Thanks!
signature
database 4656 (20091202) __
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
from ESET NOD32 Antivirus, version of virus signature
database 4656 (20091202) __
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
Hello guys.
I got a Motorola MTR2000 VHF 100Watt 150-174mhz split PA. I would like to trade
or swap the repeater for a KENWOOD TKR-750 or similar, depends on what you
have. OR swap the 100w 150-174mhz for a 40watt PA or other 2m capable PA. Let
me know what you have. I can program for you also.
I have some other Motorola gear such as the R1225 and such if you are
interested in those.
James Delancy WJ1D
NORM KNAPP wrote:
Hello guys.
I got a Motorola MTR2000 VHF 100Watt 150-174mhz split PA. I would like to
trade or swap the repeater for a KENWOOD TKR-750 or similar, depends on
Sorry guys oops wrong reply path
James Delancy wrote:
I have some other Motorola gear such as the R1225 and such if you are
interested in those.
James Delancy WJ1D
NORM KNAPP wrote:
Hello guys.
I got a Motorola MTR2000 VHF 100Watt 150-174mhz split PA. I would
like to trade
Good Afternoon,
I've been following the previous threads and doing a lot of
research on the issue of crimp on coax connectors vs. solder. Based
on that research and several very useful threads on this list I
purchased a Paladin Crimp All tool with a couple of dies for RG-8/213
and type
No Problem Jeff Just trying to save you some work - hihi...
And all info out there is of value to someone -- I hope! Just doin' my part!
73 es Tnx de Joel WA1ZYX
--- In Repeater-Builder@yahoogroups.com, Jeff DePolo j...@... wrote:
That's pretty good. But what I had were the actual
For small-diameter cables, I have Paladin CST Vario strippers. These are
completely adjustable - you insert/remove the blade cartridges to get the
strip dimensions you want for 3-level stripping, and you adjust the depths
of the blades for each strip level for whatever cable you're using (i.e.
MTR2000 is traded. Thanks guys!
- Original Message -
From: Repeater-Builder@yahoogroups.com Repeater-Builder@yahoogroups.com
To: Repeater-Builder@yahoogroups.com Repeater-Builder@yahoogroups.com
Sent: Wed Dec 02 16:25:09 2009
Subject: [Repeater-Builder] Motorola MTR2000 trade
Hello
http://www.dse.com.au/cgi-bin/dse.storefront/4b1707bf00b2dd42273fc0a87e01064e/Product/View/T3640
http://www.ripley-tools.com/tools.php?tool=LDTcategory=Drop%20Cable%20Tools
To: Repeater-Builder@yahoogroups.com
From: j...@broadsci.com
Date: Wed, 2 Dec 2009 18:15:19 -0500
Subject: RE:
We were just talking about the GLB preselectors recently. Now I have a
dead one.
I got a call that one of the local ham repeaters went stone deaf after a
lightning storm a couple of weeks ago. I got time today to stop by and
found that the GLB preselector bit the dust. I have used several
(20091202) __
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com http://www.eset.com
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* Your email settings
Joe wrote:
We were just talking about the GLB preselectors recently. Now I have a
dead one.
I got a call that one of the local ham repeaters went stone deaf after a
lightning storm a couple of weeks ago. I got time today to stop by and
found that the GLB preselector bit the dust. I
box top and affixing a flexible vent line to the outside.
This is what I was thinking of doing. Glad to see someone else had the
same idea.
Thanks!
Tom
__ Information from ESET NOD32 Antivirus, version of virus
signature database 4656 (20091202) __
The message
20 matches
Mail list logo
