Yep I have 2 6 meter repeaters I would be interested in the data to build a
few DB-212 antennas
Neal KA2CAF
--- On Tue, 11/17/09, Adam T. Cately atcat...@bright.net wrote:
From: Adam T. Cately atcat...@bright.net
Subject: Re: [Repeater-Builder] Re: Building Low Band Loop Antennas
Hey Jed How are you my Friend
I have had Kendecomm Repeaters...
The 2 meter machine was a good machine. never had Issues with it.
The 200 Machine Probably had the Hottest receiver you could find on 220Mhz
actually had 2 of these on 220..
Lost them in the House fire in 2007.
I am still
Hey Rick Finally got my GMRS repeater on the air..
its mounted at 280 feet on the tower Just Below the 2 FM bays...
Oh yeah Its n Ocean city ,NJ great coverage if your down in atlantic city
area
Neal
--- On Wed, 8/19/09, Rick Szajkowski va3r...@gmail.com wrote:
From: Rick
/repeater antenna and he will Know..
Neal Newman-KA2CAF/ W2CJA repeater system
--- On Mon, 6/1/09, Michael Ryan mryan...@tampabay.rr.com wrote:
From: Michael Ryan mryan...@tampabay.rr.com
Subject: RE: [Repeater-Builder] Re: Looking for 220 Repeater Antenna
To: Repeater-Builder@yahoogroups.com
Date
Get Rid of that crap cable your using..
I only use RG 214, and or superflex for my inter connects between the
repeater, amps in line(power amp/preamps), and the duplexer. Mosly 1/4
superflex becuase I got lots of it. In a pinch I will use RG-142... Never use
that 400 or 9913 garbage..
I dont know anything about this particular Tower or how and when it was put up.
if its a sleeved tower like a Rohn 25g or 45,55, Universal.
I always apply Lithium Grease at the joints. This Helps putting up and taking
apart towers in the Future. this also a creates an Electrical conductivity
on 214 and 400 you might note that
the 400 is rated att 98% shield where as 214 is at 96% for
whatever THAT fact is worth….probably nothing. - Mike
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of neal
Newman
Sent: Saturday, March 14, 2009 9:23
-Builder@yahoogroups.com
Date: Saturday, March 14, 2009, 10:29 AM
RG-400 is the same as RG-142 except has a stranded center.
It's not crap. LMR400 is crap, but that's not what
he said.
Chuck
WB2EDV
- Original Message -
From: neal Newman
To: Repeater-Builder
?
Chuck
WB2EDV
- Original Message -
From: neal Newman cozy...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, March 12, 2009 4:55 PM
Subject: Re: [Repeater-Builder] Quieting duplex noise from
a tower
Samething here in NJ. the Club put all new Db Antennas
Samething here in NJ. the Club put all new Db Antennas On the 100 foot tower.
New Feedline. still had the noise...new grounding system. all sections bonded.
still Noise. changed the guy cables to Phillystrand. Problem went away
--- On Thu, 3/12/09, Chuck Kelsey wb2...@roadrunner.com wrote:
Hey Guys...
For those that know that I just rebuilt after a house fire.
Im Finally Getting Everything cleaned up and back on the air.
This Morning I relized one Minor thing missing...
I have My Motorola Key.. but I cannot Find my GE key to open my cabinets
I thought I had one in my Ranger
to the Brain trust
Boy its been a busy and crazy 2 years with the house Fire.
Now its Time to rebuild the repeaters that were lost in the fire.
thank Gd 2 meters and the 440 were at a comercial site.
220 is on the bench and almost Finished to be put back up.
one of the 6 meter machines.
Thats great news Joe..
Now If you link into the N2ROW system You can then Link into My 53.71/52.71
system.in New Jersey and we can have a party.
What Duplexers are you using Or are you split site.
Ill try to send Pics Of My 52.71 Machine and My 52.67 machine..
Neal KA2CAF/W2CJA
duplexers, Mitrek mobile, NHRC-4 controller. Single
site.
73, Joe, K1ike
neal Newman wrote:
Thats great news Joe..
Now If you link into the N2ROW system You can then
Link into My 53.71/52.71 system.in New Jersey and we can
have a party.
What Duplexers are you using Or are you split
Hey guys I have a 2 meter GLB preamp/preselector
where the MRF 901 appears to be shot.
now the question of the day. which side is the Base of the MRF-901 is it the
side with Only 1 helical or does it face the side with the 3 helicals... I
think the MRF-901 thsts in there ( which has
Hey Joe
Im running the same thing a Converted Mitrek on 52.71/53.71
with a hardline Duplexer. ( off air at moment due to loosing duplexer in the
house fire. setup worked great. Other machine is a MastrII 3000 watt repeater
with Full size Commercial Duplexers.. Both are easy Conversions
on 53.71, but
it is just an
experiment to see if 6 meters will play at the site with no
other
problems. I don't think we will hear each other, as we
are 130+ miles
apart.
73, Joe, K1ike
neal Newman wrote:
Hey Joe
Im running the same thing a Converted Mitrek on
52.71/53.71
@yahoogroups.com
Date: Wednesday, February 18, 2009, 7:36 PM
We should be able to hear that 3000 Watt MASTR II repeater
all day, every day!
-Original Message-
From: neal Newman cozy...@yahoo.com
Sent: Feb 18, 2009 4:18 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder
Hey Ralph is this Repeater going to be located at Star Pass Resorts? that
overlooks the Entire City of Tucson...
Nice Place to Vist.. I was out working in Tucson On New years... The
Roadrunners are Coolsame for the Humming Birds
Neal Ka2caf
--- On Sun, 2/15/09, Ralph S. Turk
Question is that the Length Before the Element is Bent? or is that already bent
measurinf from Tip to tip?
--- On Sat, 2/7/09, Chuck Kelsey wb2...@roadrunner.com wrote:
From: Chuck Kelsey wb2...@roadrunner.com
Subject: Re: [Repeater-Builder] Decibel folded dipole
To:
Play it safe dude
buy a 2 foot piece of either 1/2 or 3/4 inch PVC and an End cap
drill a hole in the End cap. Place a 4 long 1/4-20 Bolt through the hole in
the cap. Tighten up the bolt with Nuts and washers.
Put end cap on End of 2 foot tube
place a Length of wire and Clip Onto this Bolt.
what those frequencies might be used for in either country, but nothing
definative.
Thanks!
- Original Message -
From: neal Newman
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, February 04, 2009 6:13 AM
Subject: Re: [Repeater-Builder] Need Info on - Sigma DX26FB Duplexer
I had a Flat pack 220 Duplexer.. what your describing is much to small.
for 220Mhz its closer to 18 inches long not 4 inches
sounds Like you have a 440 or 800 mhz duplexer... But then again what do I
know.people are always trying to beat Physics and theory By making smaller
.
No guess on the engine, but keep watching EBay.. surely one will turn up :-)
- Original Message -
From: neal Newman
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, February 04, 2009 6:38 AM
Subject: Re: [Repeater-Builder] Need Info on - Sigma DX26FB Duplexer
Yeah and If you notice. the HT is actually a Kenwood TH-21BT radio
This radio with the optional Headset Does in fact have VOX
Neal
--- On Mon, 2/2/09, MCH m...@nb.net wrote:
From: MCH m...@nb.net
Subject: Re: [Repeater-Builder] OT: Radios and Coms in TV and Movies
To:
watch the movie again.
some of the Hts were the AT series and had tone pads . Others did not
and the antenna was too thick to be the UHF series... My guess is the TH-21AT
radios.. I am looking at Mine sitting On the desk
Neal
Sorry-in hindsight they were 41A's, not the AT
dcf...@gmail.com wrote:
From: DCFluX dcf...@gmail.com
Subject: Re: [Repeater-Builder] OT: Radios and Coms in TV and Movies
To: Repeater-Builder@yahoogroups.com
Date: Monday, February 2, 2009, 9:17 PM
Blue short antenna, 31 series...
On Mon, Feb 2, 2009 at 5:48 PM, neal Newman
cozy
Thats too Funny.. I fell off my Chair
wish I had a camera when we opened one up. it was full of Bats. Almost fell
off the Tower
Neal-ka2caf
--- On Sat, 1/31/09, Bryon Jeffers KØBSJ k0...@hamrepeater.com wrote:
From: Bryon Jeffers KØBSJ k0...@hamrepeater.com
Subject: Re:
.
I just delt with an AM station that had an FM translator on it and cell
antennas being Installed. without iso couplers... and the owner wondered why He
had Problems with his station...
If your wondering I Build,and maintain AM stations for a living
Neal Newman- KA2CAF/ WQEN680
East
skip I opened up My 2 meter GLB preamp preselector.
it is an MRF-901.
Years ago there was an article in one of the Ham radio handbooks
that showed a 4 element UHF preamp/preselector that I built for ATV use.
and it too was based on an MRF-901. It worked great.
GaSfets I feel have too much gain,
Kevin you have a number where we can Chat?
Having an issue with a GE MastrII Base/repeater that was given to me.
the 10 volt Regulator. THe radio would receive and Tx with the REM TX button.
The jumpers were 1 and 3 and 2 and 4
but when I switched them to 1-3 1 and 2 it stopped working why?
Noise on the six meter repeater.
On my machine 53.67 in New jersey I was getting noise that was holding the
machine Keyed up. then drop. and key up again. I thought it was desense Even
with a big expensive
Commercial Duplexer. with the transmitter off, the normal unsquelched Hiss
sounded
Are you sure about that.. I have a 2 meter GLB pream preselctor thats not
working.. I even replaced the MRF901 several times still No good.
I called GLB to Price a replacement and almost fell off my chair when they
told me how Much. If It works I could use a christrmas gift( P.S.
Mine
The Old codes were 3 digits like 100 ,101,102,103
the newer versions had 4 digits 4100,4101,4102 Ect..
try that
--- On Wed, 12/17/08, wb8art wb8...@netzero.net wrote:
From: wb8art wb8...@netzero.net
Subject: [Repeater-Builder] RC 1000 controller code table
To:
Don this Link does not work
Neal-ka2caf
--- On Mon, 12/8/08, Don Kovalchik - W8DPK w8...@arrl.net wrote:
Here is a link to the S-1320A service manual:
http://mcarcoh.org/S1318-19-20-21-29 Signal Generator.pdf
It's a pretty large file, about 16MB, but it's very high resolution. I'll
leave
My question on this I have an R100 Uhf repeater that I want to reprogram.
where do you guys get the software for doing this... I have seen diagrams to
Build the cables.. thoughts?
Neal-KA2CAF/WQEN680
--- On Fri, 12/5/08, jim law [EMAIL PROTECTED] wrote:
From: jim law [EMAIL PROTECTED]
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:Repeater-
[EMAIL PROTECTED] On Behalf Of neal Newman
Sent: Wednesday, October 29, 2008 7:59 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Broken Rock MT. tower
collapse
looking
looking at the Pictures YEP an FM went off the air.. Must have been a Non Com
based on the Type of antenna I only see 2 bays
/
you wont notice the loss...
My club just Put up a New antenna and New 7/8 hardline. the hardline was about
200 feet. the Tower Guy dropped a knife. 1 in a million shot and cut the
hardline at the base of the Tower.
I spliced the cable using 2- 7/8 EIA flanged Connectors because that what I
On a quick Note Ron
If the repeater was for emergency services( Police,fire,ems or during a storm)
,and was a Must Get on the air at any cost that would save lives. I would
allow that stupid splice Until I was able to get the correct connectors to make
the Correct splice.
and that would
to get something important on the air.
73, ron, n9ee/r
From: neal Newman [EMAIL PROTECTED]
Date: 2008/04/22 Tue AM 07:44:46 CDT
To: Repeater-Builder@yahoogroups.com
Subject: Re: Re: [Repeater-Builder] Re: Bad adapter
On a quick Note Ron
If the repeater
If you Run a 300 watt repeater you do not need a
duplexer.
You Build the system with a Master site with the 300
watt transmitter in that rack you place several UHF
link receivers and a voting system.
then place Receivers all over the place Linked
back to the master site.
with a Duplexer I
Try Legend Electronics
140 Old Saw Mill River Road S
Hawthorne, NY 10532
Fax: (914) 747-1770
Tel: (914) 747-1777
Monday to Friday
8:00am to 7:00pm EST
Its a motorola RF Brick( module)
or you can try
Accord Technologies, Inc.
2515 Elwood Dr. #106
Ames, IA 50010
Phone:515-268-0578
Fax:
1st off they have a CP to power upgrade to 1.5kw vert
100 watts Horizontal
2nd
They are licensed to operate at 100 Watts ERP
translated thats 240 Watts TPO( transmitter Power
output. as Far as Running 240 watts
that is Correct For their licensed Power They
were not Running too much
Sure BE( broadcast Electronics) makes a 5 gig Bi directional studio
transmitter link. I just got one to use on a 8 mile path
however it cost $18k.. good thing it was a loaner. It going back
in a few weeks.
Bill wrote:
I live in a remote area, where I can receive DSL service in my
Its been awhile
what Companies still make good Preamp preselectors for repeaters not
overly expensive?
VHF and UHF
I am also looking For someone near central NJ that can reprogram a
Motorola R-100 UHF repeater for me and Flat pack duplexer.
I know Dont ask for a copy Of the RSS
Vincent Caruso wrote:
For Preamps try http://www.advancedreceiver.com/index1.html
Neal Newman wrote:
Its been awhile
what Companies still make good Preamp preselectors for repeaters not
overly expensive?
VHF and UHF
I am also looking For someone near central NJ that can reprogram
I Guess Im lucky..
Im on a commercial tower with 3 runs of 7/8 hardline. the deal is Just
pay the Elerctric bill. Fair enough to me...
Neal
Jeff DePolo wrote:
Before everyone decries $ let me say that if you are
wanting (free) space on a prime site, you need to LOOK like a
Any of you guys know anything about a repeater controller called an
RC-210? or something like that.
I see this 3 port controller all the Time on Ebay
Good, bad how difficult to program?
thanks
Neal
the A and the D are defaulted into the software
you cannot change them
so you may have the code A45 on and A46 off the 45 and 46 you
program into the Controller same with the "D"
I dont have my manual handy.
I am running several of these controllers...
Neal-KA2CAF
John J. Riddell wrote:
Gary
I agree with you on the below when it comes to an officer using his 2
way radio while on Duty... But there is a double standard when it
comes to hand held Cell phone use while on duty and driving... I
highly doubt that an officer while driving and using a hand held cell
phone is using
contact them and tell them to cool it. I called in about a deputy sheriff
one time as he had his unrestrainted son in the back seat of an unmarked
car, and he stopped hauiling his kids around and doing personal errands on
county time.
Butch, KE7FEL
From: Neal Newman [EMAIL PROTECTED]
Reply
The Heliax duplexer works great with a 1 mhz Split... but I think he is
Running a 500Khz split
He will need either a higher Q type can Or more than 6 Heliax's for
the isolation
Dick wrote:
Steve:
A friend built one of trhese heliax 6 m duplexers and swears by it.
73,
Dick
-
New subject
anyone out there Running a wind generator to Charge batteries Or
running their Repeaters or ham shacks.. Im mostly interested in info
On HOME BUILT wind generators...
I see so may Types 12V 24V 48 volt 400,800,1000 watt units
But not sure if I would Need to build a higher
ary, 2006 19:33
Subject: [Repeater-Builder] Re: Beer keg resonators -
kind of off topic, but relevant
--- In Repeater-Builder@yahoogroups.com,
Neal Newman [EMAIL PROTECTED] wrote:
Im still looking for a Set of cans for 6 meters
55 gallon drums???
Laryn K8TVZ
Hey Mark
The SBE needs to rethink the Amateur Certification For Extra .
The Extra is No longer the Same technically as it once was.
The SBE should Consider the Advanced Class For their Certification
level
since it is No longer Given and anyone that has the Advanced can
really say it was the
Doug and I are OLD friends... even though we have Not seen each other
since his Move out West
I expect to get flamed for this Comment But its all in FUN..
Hey Doug. July Test for your Extra? and its about Time???
Lets face it Even Im thinking about upgrading to extra. But its
Very Cool anyone have Ideas other than the Helix /hard-line duplexer
for 6 meters..
Im still looking for a Set of cans for 6 meters
Dick wrote:
VERY NICE
Thanks,
Dick
-
Original Message -
From:
Mike Perryman
To: [EMAIL
I always thought a repeater was currency with repeater serial numbers
like 101010101
or 200200200
Or a Person that repeats the same thing Over and over and over and
over and over KK
oes this have to do with the thread I created, What Is A
Repeater??.
Doug W7FDF
Yahoo!
Doug Fitts W7FDF wrote:
Now there is a name from the Past DOUG FITTS...
LOL how the Heck are you..
If you didnt Hear Harry WB2KFO passed away just before Christmas...
Neal
Yahoo! Groups Links
* To visit your group on the web, go to:
Very Cool
I took over the Oldbridge repeater I Understand. Did Jay give/sell
you the old machine? thats what I was getting at.
Neal
Andrew G. wrote:
Jay's letting us have the pair. His machine is offline and it is
my baby now. I would not even think of being like some AH's and putting
up
I did Not know that... wow deeply sadened he was a good guy
Jay is now aSK sadly.
Andy
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
YAHOO!
BTW hes still listed in QRZ when did he pass away?
Andrew G. wrote:
Jay is now aSK sadly.
Andy
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Hi Andy
That Freq pair used to belong to
Jay Gerstel KA2CUS
You should see If he still has his old repeater.
Was this a metroCor? coordination.. Because they have been screwing
up They coordinated a few People on MY pairs but so far No real
interference. they did it on my 2 meter and
HEY Andy what Frequency are you planning On putting this 220 repeater?
Andrew wrote:
Guys,
If anyone has any 220 repeater equipment they would like to get rid
of (sell/working) such as amplifiers, RX or TX stuff and things of
that nature please contact me direct off list. I am in need of
QRZ.com is working I just tried it//
Neal-ka2caf
Doug W7FDF wrote:
I tried earlier this morning [around 830am Thursday]. I tried just
before I left home [this morning] for work [around 1230pm] and I
tried
tonight [just a few minutes ago] at 1030pm PST]. No QRZ. com!
...where [website] are
For Years I used the GLB Preamp/Preselector on thefront end of my
Midland 509 220Mhz repeater
the preamp stage is an MRF-901
I think a Gasfet Preamp will create to much noise
Bob Dengler wrote:
At 8/2/2005 06:55 PM, you wrote:
Joe wrote:
I had an FM76 convered
Not sure of the model # But they sure do look like Db Products Duplexers
Mike Besemer (WM4B) wrote:
Greetings all,
My club has a spare set up duplexers that we want to have ready for use in
the event we ever need them. Unfortunately, we don't know what they are and
they have no markings on
I could not find the old catalog Tom with the Number But said they
were Db products Yes I agree on the 4062's
Neal-ka2caf
Tom Parker wrote:
Mike,
Looks like to me you have a DB 4062. Very good duplexer. You can find
the specs on line... just google for them. They tune up real
we stand corrected thanks Jimmy
Jimmy Floyd wrote:
They look like the DB-4060 4 cavity duplexer 2 transmit and 2 receive.
The DB 4062 is the 6 cavity duplexer.
Both are BP/BR.
Tuning instructions can be found at
http://www.repeater-builder.com/db/db-4060-4062-tuning-inst.pdf
Jimmy
Hey Kevin
You have any Picsof this Or Diagrams On making the loops and Pass
Notch info Caps ect.
Ive Been looking for a while for 6 meter cans.. I have 1 5/8 hardline
was going to Build a Helix Duplexer.
How long are the cavites?
why not just Use Stovepipe and Cap both Ends?
Neal
Not For nothing.
I once owned a Crown Vic Bought it from a police auction complete
with the Bolted Transmission.
It was an old PA state Police chase car can you say Fast YEP. But the
speed limit is Only 65.
when I lived in NY I was involved in law enforcement. also my local
OEM.
I had at
Ken
That's an Understatement..
If we ever Meet boy have I got a True story to tell you.
Its one thing to have border patrol at a border. Its another thing to
have border patrol over 100 miles south of the border
in the middle of nowhere. and stranding a Taxpayer in the middle of
nowhere
Neil McKie wrote:
actually at the Time the FCC had a list of all Type accepted Radar
units for Police use.
and the Radar that was used was not on the list as Type accepted..
theirfore the ticket had to be dismissed.
I also challanged a ticket like that and won.( this was over 20+
years
Yeah Right USDHS is the First step to being American Nazis
I Vant to see your papers you need to carry your birth certificate
or passport upstate NY without Leaving the state.
I know it happened to me. First thing Customs needs to do is to get
rid of the Mexican looking officers out of
Doug
Run a Virus scanner like SOPHOS
Mcafee and Norton wont find all trojans.. sophos will
free trial at www.sophos.com
sounds like your Router is getting flooded by a trojan
I was getting the same thing had to unplug the router to clear the
flooding
NEAL-ka2acf
Doug W7FDF wrote:
I have Maggiore machines also Yes They have power On and they work
great...
Neil McKie wrote:
Did you apply power to them?
Neil
Jed Barton wrote:
I'll second that,
I own 3 maggiore repeaters.
One of my sights, ihaven't been to in over 3 years.
-Original
Hey Russ its almost like putting 2 of the old Cushcraft 4 dipole
arrays together=8 poles..
I think that was rated at 12 db...4 elements was between 6-9 Db...
I still run the Cushcraft 4 pole on the 440 machine.
russ wrote:
Thank You all that replied,
I guess I will stop tomorrow morning
My machines all run 12 volts when I loose 120Vac the only thing I
loose is the power amp so the machine goes from 180 watts down to 30
watts the UPS backup is for the Computer in the shack. when that dies
Ohh well no big loss the backup Generator should be running
before that happens...
I do not remember the value of the resistor... But I put my pl on the
wiper of the deviation Pot
worked for years.. I ran a 13-509 repeater in the 80's then got a
Spectrum around 1989. and its still running... If I had to Build a
machine today I would be running a Maggorie.
as for the
My time to chime
I had been running spectrums for years.2 meter transmitter died in one
machine replaced it with a Maggorie.. nice and clean.. does the job.
I replaced a Hamtronics receiver in another machine with a MastrII
receiver. Until my Maggorie
arrived. After I installed the Maggorie
Hey Gregg
How do you like that K2/100
I came across the website By accident.. been thinking of building one
ever since..
I just wish it operated AM besides SSB... any info would be great..
easy Build and align???
Neal-ka2caf
Gregg R. Lengling wrote:
It really isn't that bad. It
get the Maggiorie transmitter and receiver boards. they are 3x5 in
size. draw very little power and you will be running 5 watts right out
of package without an external amp... I dont think you can get any
smaller than that...
Neal
hooker wrote:
Hello group,
I have the
Hey John does the receiver work I need one here
Neal-KA2CAF
address good in QRZ.com
JOHN MACKEY wrote:
A door stop is now available in Sioux City, Iowa!
It has crystals inside it for 147.66/06 and the front of the door stop says
Spectrum Communications.
Yahoo! Groups Links
Hey as an Elmer I teach my students electronic theory.
His Elmer apparently has NOT. shame on Him minus -20 Elmer for him.
Jeff Otterson wrote:
Neal Newman:
You should be ashamed of yourself.
Minus 10 Elmer points.
Jeff
At 11:44 PM 11/30/2004, you wrote:
Sorry I cannot
to a probable newbie,
eh?
Eric
-Original Message-
From: Neal Newman [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 30, 2004 8:45 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Inverting COS
Sorry I cannot resist this one..
And you call
Sorry I cannot resist this one..
And you call yourself a Ham?
My wife the Novice could answer that question.
Basic Transistor theory..
even an op-amp inverter
Her reply isIf he does not know how to invert the signal
he should not be building a repeater...!
Next question...
First off You changed the Duplexer?
how about the cables?
I have found that a bad connection or Oxidation acts as a diode. and
will allow the AM stations Audio to be heard.. I have this problem with
a telco Box the Phone company placed
Exactly 1/4 wavelength away From My 10 kw AM
Russ what did that 224 Cost??
Neal-KA2CAF
russ wrote:
They also do have the DB-224e in stock I bought one from them last week. I
got the price from Dean in the Glassboro NJ office.
We installed it this morning and it is working very well on our 147.315
repeater in Chester PA. It is nice
As repeater owners... we all know what its like for a new Coordination
Body to take over and screw things up.. well here we go again in the
tri-state area with metrocor.
all I will say is that my machines have been on the air for more than
15 years. at the present location For the past 10
Yet... and what receiver would
you recommend replacing a Hamtronics receiver with the choices
are Maggorie,Kendcom,,,spectrum
.
Kevin Custer wrote:
May I remind everyone that this list (Repeater-Builder) is NOT for the
discussion of coordination.
Thanks...
Kevin Custer
Neal Newman wrote
the question Mike is
will they tune down to 6 meters and how big are they?
But then again I know thats a Dumb question..
Mike Perryman wrote:
If anyone is interested (and I seriously doubt that will be the case!!) I
have a complete BP/BR duplexer for that setup (72-76 MHz Micor
Hey whats with the transmitter on 145.230 that has no receiver??? I
can hear you guys. but cannot talk back.. BTW why dont you go to that
Con Ed Fire at the navy yard...
Richard Velez wrote:
I have an scr1000 220 repeater. Its possibly the same. Call me.
718-999-1436
Rich/N2ROW
Scott Spectrum is still around.. after 15 years I just had a receiver
failure in my SCR-1000 Repeater.
I called left a Message and within 24 hours I got a call back . I
just shipped them the receiver
lets see how long it takes to Fix and return.
Neal
Scott wrote:
Many thanks Russ, Joe,
Having met with Paul Maggiore , and spending a day with him. I find
that very hard to believe.
Paul backs up his product. No matter who bought it for whom,..If it
was built by his company
he will back up his product..
Neal
Steve Grantham wrote:
Caveat Emptor. If you buy Maggiore, the
Joe
You are Correct..
I had asked Paul how and why he got into this Business..
and He told me that it was his fathers business... after His Father
passed. he went through a difficult time in his life as with any guy
loosing his father. He decided to carry on his Fathers reputation of
Hey Russ...
I was out in West Chester PA 2 weeks ago... I wanted to Visit the
station. But did not know where you were located...
Neal
russ wrote:
I was 15 with a 3rd class and endorsed for broadcast got a job after school
with a day time 500 watt omni. Even moved up to coming in before
,WUPC,W220AA
russ wrote:
Hey Neil,
You should have let me know you where close. The Station is in
Philly PA. but I could have run out to West Chester an picked you up.
Very best of 73,
Russ, W3CH
-
Original Message -
From:
Neal
Newman
Hey Jed
what TIME and low band frequency are you guys hanging out on these days...
Old Friend
Neal
KA2CAF
Jed Barton wrote:
Hey guys,
Anyone know where I can get descriminator audio off the Icom rp4020?
Thanks,
Jed
Yahoo! Groups Links
Yahoo! Groups Links
* To
Second Posting waiting reply
Hey Guys.. I am having a problem with My Wacom Cans... I am just
Courious
what should the Length be for the 4 jumpers.. the 2 between the cans
and the 2 that meet at the
output Tee. the repeater is on 145.230
and what type cable should Be used ( I think
1 - 100 of 122 matches
Mail list logo