Well, I have only one observation on this statment. In late 70's or early 80's
CP was the proposed solution to ghosting. WTTV - 4 Bloomington converted to CP
for that exact reason. Working in the field we documented the difference at a
receive site. I still have the Poloraid's somewhere but
Tony, Try this one at RB website.
http://www.repeater-builder.com/downloads/download-index.html
--- In Repeater-Builder@yahoogroups.com, Tony KT9AC kt...@... wrote:
Other than ordering the software, is there an old-school formula that
can be used for this? I been using the decibel-wheel to
Welcome Andy and yes a lot more harder these days to get a good site.
Randy
--- In Repeater-Builder@yahoogroups.com, Andy Hearn g3...@... wrote:
Hi Everyone
Just found this group from repeater-builder site. Run GB3CC, but off air due
to loss of commercial site due to increased rent etc.
/09, wb8art wb8...@... wrote:
From: wb8art wb8...@...
Subject: [Repeater-Builder] Exec II input problem
To: Repeater-Builder@yahoogroups.com
Date: Thursday, May 28, 2009, 4:02 PM
Wonder if anyone has had this problem
:
Did you check the front end for tin whiskers like someone else posted? They
can easily destroy sensitivity.
Chuck
WB2EDV
- Original Message -
From: wb8art wb8...@...
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, May 30, 2009 9:28 AM
Subject: [Repeater-Builder] Re
Wonder if anyone has had this problem and know what the problem is. I am
working on a GE Exec II repeater (converted mobile) which has no Comb no. I
any case the issue is that if I move around the cable feeding it with a
generator I was seeing a change in the recieve.
I went
Can some one with one of those fancy programs like Comm-Shop run it and tell me
the max power a Exec II on UHF ham band run with a 75 isolation mobile
duplexer. Assuming that the coax and ant are a ideal setup.
Randy WB8ART
duty cycle in
repeater service may be more important than avoiding desense.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of wb8art
Sent: Wednesday, May 27, 2009 11:11 AM
To: Repeater-Builder
Mike, I use a 2 watt solar powered SP-2 by PulseTech. Works great.
http://www.pulsetech.net/
Randy
PS no noise that I have detected on any bands yet.
--- In Repeater-Builder@yahoogroups.com, Mike Morris WA6ILQ wa6...@... wrote:
Got a friend who is laid up with back problems.
His car
Paul, I have a question on this suicide control. Are you killing everything
thus no ability to revive the site without visiting it? Not withstanding I
would use a simple small repeater controler. Chose your poison there, but in
any case, there are some that give you a small amount of logic
Vern, If your relay coil doesn't draw very much current it probably would
work. I would say using a opto isolator or minumum a transistor switch would
be a more practical method. I use a simple 2n transitor to fire a MII for
echolink.
Randy
--- In Repeater-Builder@yahoogroups.com,
consider it a must have feature. My main concern
is that the kill switch be as reliable as possible. Of course
nothing is 100% reliable! If a receiver or DTMF decoder dies, I will
lose the ability to kill the site anyway.
Paul
wb8art wrote:
Paul, I have a question on this suicide control
Bob I have been able to fit the ICS Basic controller in the front in place of
the tone bd. similar to the NHRC retro. So far not had any problems.
Randy
--- In Repeater-Builder@yahoogroups.com, n...@... wrote:
At 3/27/2009 07:36, you wrote:
Bob, I've been considering getting one of the NHRC
Hello Paul, Worked you a few times many moons ago. I would agree with Jeff
with tapping and slightly causing movement with the repeater up with a weak
signal.
I have before experiened both an antenna (stationmaster) with internal
broken joint which caused severe noise and desense but
Don, Its pretty straight forward. They have a size equivilent to the 3/16 in
mechanical strength, and you should use the Phillystran preforms and timble
sleeves. Make sure not going thru trees or other such things that could rub
against it. Hope that answers it. But we had them up for 12 or
image source.
Original Icom 3AT portables are/were really problematic
to use in my area because of poor TV signal image rejection.
cheers,
skipp
wb8art wb8art@ wrote:
Skipp, why would you not filter it on the input?
Randy
--- In Repeater-Builder@yahoogroups.com, skipp025
Skipp, why would you not filter it on the input?
Randy
--- In Repeater-Builder@yahoogroups.com, skipp025 skipp...@...
wrote:
I remember that Neutec Unit... saw it on Ebay.
Mike
Do you have any analog television stations on channel(s) 11
through 14 in the area still on the air?
Did you Google the no.?
--- In Repeater-Builder@yahoogroups.com, mike m...@... wrote:
I have been searching for the velocity factor for E86650 cable. This
was the stamp on the cable. I think it is simular to RG-59 but want
to
make sure. I need to build a phasing harness and wanted to
Seems to be TFC T10 drop and should be 85%.
--- In Repeater-Builder@yahoogroups.com, mike m...@... wrote:
I have been searching for the velocity factor for E86650 cable. This
was the stamp on the cable. I think it is simular to RG-59 but want
to
make sure. I need to build a phasing
It certainly looks like Rohn 45.
Randy
--- In Repeater-Builder@yahoogroups.com, Kris Kirby k...@... wrote:
On Wed, 7 Jan 2009, Chuck Kelsey wrote:
How can I identify an otherwise unknown tower as Rohn 20, 25,
45, etc.
or even another tower manufacturer altogether?
I'm
Hi Mike, Best I can find out it is called a service monitor, hence SM
in model no.. Has Sinadder function as well as monitor RX and signal
generator and modulator, deviation, and off frequency detector meter.
Randy
--- In Repeater-Builder@yahoogroups.com, Mike Morris WA6ILQ
wa6...@...
Anyone have a operations manual and or service manual for a Helper
Instruments SM-512
Randy
Joe can you send it direct to wb8art at netzero dot com. I use the
web base mostly and it does get the attachments.
Thanks Randy
--- In Repeater-Builder@yahoogroups.com, Joe k1ike_m...@... wrote:
Here are the codes from the July 1, 1995 Rev 4.3 manual.
73, Joe, K1ike
wb8art wrote
Anyone have a copy of an older version of the code user tables? I
have chip version rev 4.34, and the RB sites text is rev 4.7.. There
are some differences apparently and it would be nice to get the
correct tables.
Randy
,101,102,103
the newer versions had 4 digits 4100,4101,4102 Ect..
try that
--- On Wed, 12/17/08, wb8art wb8...@... wrote:
From: wb8art wb8...@...
Subject: [Repeater-Builder] RC 1000 controller code table
To: Repeater-Builder@yahoogroups.com
Date: Wednesday, December 17, 2008, 4:36 PM
I don't beleive that to be correct. The FCC has mandated 3 years for
the continued carriage of analog. Some exceptions on small systems
and low bandwidth but most will still carry analog.
Randy
--- In Repeater-Builder@yahoogroups.com, Nate Duehr [EMAIL PROTECTED] wrote:
On Jul 12,
I am not buying it. Seems over the top and you would never have
enough breaker panel posistions for all of the needed outlets.
Randy
--- In Repeater-Builder@yahoogroups.com, Ron Wright [EMAIL PROTECTED]
wrote:
Bruce,
Probably should kill this topic for it has radiacally changed from
--- In Repeater-Builder@yahoogroups.com, Kevin Custer [EMAIL PROTECTED]
wrote:
Steve Bosshard wrote:
Aluminum gives directivity and pattern - GAIN comes from EIMAC.
Now THIS guy knows his stuff.
4CX250R (Eimac) and 2 metersYea!
Yeah 8877 Now your talking
Well it won't be broadcasting every 5 minutes! What else?:-)
Randy
--- In Repeater-Builder@yahoogroups.com, Paul Plack [EMAIL PROTECTED]
wrote:
OK, Rob, I'll bite...
If the cable's been cut, activating the alarm, how will the
repeater alert you?
This sounds like a solution I'd come up
Looks like you should be on 444.85. Nothing close here on that freq.
Both 12.5 up and down have repeaters closer. Cinci and Troy I beleive.
Randy
--- In Repeater-Builder@yahoogroups.com, n9wys [EMAIL PROTECTED] wrote:
OK, thanks Paul!
From: Repeater-Builder@yahoogroups.com
Kudos and many thanks to you Jeff, got the filter in yesterday and
installed it today and seems to have solved the problems. Muchos
Gratis and see you here in Dayton.
Randy
--- In Repeater-Builder@yahoogroups.com, Jeff DePolo [EMAIL PROTECTED]
wrote:
Randy,
There could be 2 problems
Hi, I have a slight problem with a 444.6 output repeater and looking
for the best and low cost approach to fix. We have just moved to the
site and the owner has the 440 repeater. The ants are all at the same
height and hence we only have a small amount of horiz separation. We
can't change
in there. or is it coming
in thru the wiring?
Chuck K0XM
On Thu, Mar 6, 2008 at 7:57 AM, wb8art [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
Hi, I have a slight problem with a 444.6 output
repeater and looking
for the best and low cost approach to fix. We have
That sounds great Jeff and yes I would take it. If you can ship it I
would more than reimburse you for the shipping costs.
email me direct at wb8art at netzero dot com
--- In Repeater-Builder@yahoogroups.com, Jeff DePolo [EMAIL PROTECTED]
wrote:
Thanks Jeff yes I felt I would need
I would replace the .1 uf 150 pF at same time and try again.
Randy
--- In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote:
I've had a 6.8 µF 35 V capacitor burn up on the GE VHF HB MVP.
This is a
filter cap. for the final PA DC voltage, in parallel with 0.1 µF
150 pF
caps.
Hum so your saying law office is a landfill? :-)
Paul Plack wrote:
You guys are just looking in the wrong place. You need to go
computer shopping at a landfill!
I have an old 386 SX 16 running DOS 6.2. I keep it around just for
these eventualities. I built it in the early 1990s from a
Hi, Anyone here tried using a TS64 after a voter. I can see were
decoding would chop in and out, as it changes between site selected,
but thought we would ask the group.
Randy
that DC temperature control line.
It's been 10 years since my last MII mobile conversion, so the
memories are somewhat dusty, but I'd try another ICOM to see.
73,
Paul, AE4KR
- Original Message -
From: wb8art
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday
for
suggestions on where to connect your controller to the
backplane on the GE Station.
73 - Jim W5ZIT
--- wb8art [EMAIL PROTECTED] wrote:
Thanks Bob Paul for the response. Yes it is the
unit with the
compensation line running between all ICOMS. This
is kind of where I
have been
recommended
against using computer serial cables as interconnects
for controllers - HI. Worked fine for me though -
73 - Jim W5ZIT
--- wb8art [EMAIL PROTECTED] wrote:
Yes I checked power levels and change in power has
no effect on the
issue. Yes see where the connections
-
From: wb8art
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, December 13, 2007 4:44 AM
Subject: [Repeater-Builder] Re: MastrII Mobil repeater spur
Thanks Bob Paul for the response. Yes it is the unit with the
compensation line running between all ICOMS
value. I
have found several boards from stations that did not
have one of the caps installed at all.
73 - Jim W5ZIT
--- wb8art [EMAIL PROTECTED] wrote:
Hi Jim, So you just solder wires onto the back
plane circuit board?
I quess this is my quest to see where most people
connect
One for the wonderfull experts here. I have been working to many
nights this week to be able to think straight.
Our MastrII converted mobil developed a spur problem last nite. Were
on 145.43 and the spur was on 145.11. Very strong and subbing in a
standy unit produced the same results. The
Ian, Are the guys on this tower or is it self support? We had a
simular problem with stranded guys. Changed the guys to Phillystran
to solve it.
Randy
--- In Repeater-Builder@yahoogroups.com, Ian Wells [EMAIL PROTECTED]
wrote:
Hi guys .Is there a way that you can locate loose bolts or
--- In Repeater-Builder@yahoogroups.com, Kris Kirby [EMAIL PROTECTED] wrote:
On Sun, 12 Feb 2006, Chuck Kelsey wrote:
typical mobile installation? Maybe not. Do we DESIRE to run a
certain
level because we can? Sure, just like we may want to install a
100KW
generator on site to run 3KW
Joe, If you can get hold of a TDR that worked well for us to find the
problem. If also is a easy method to test for antenna problems while
still on the tower. We had a Stationmaster with a bad solder joint
and it was causing desense in windy days. Found and fixed with the
TDR. Also we had
Sounds like to much playing to me:-) 7 kids:-)
Randy
Mathew Quaife [EMAIL PROTECTED] wrote:
I thought that would work, even tried the locked band but that did
not work. So I decided I am just going to get some squelch circuits
and use them. If I had more time I would build them, but time for
Hi anyone have a LBI for the 19C327572G timer in a MVP?
Randy
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is
More likely CH.18 as CH.19 is 151.25 pix carrier.
--- In Repeater-Builder@yahoogroups.com, DCFluX [EMAIL PROTECTED] wrote:
How bad were you clobering CH.19?
On Fri, 11 Feb 2005 19:26:22 -0500, Q [EMAIL PROTECTED] wrote:
I intend to kill that Beast! Seems the local cable company had
49 matches
Mail list logo
