RE: R: Floppy disk drive error

2016-05-23 Thread Colin Piggot
Always worth bearing in mind that the Citizen disk drives used by MGT/SAMCo 
were made around 1989-1991 or thereabouts, they were discontinued very early in 
SAM’s life so are getting on for over 25 years old! The belts will be perishing 
quite a bit and becoming slack, unfortunately I’ve not been able to get 
reliable replacements for a few years – not found another that I was 100% happy 
with.

 

The only solution I currently offer is my replacement disk drive system based 
around a modern PC disk drive and a new controller board -> 
www.samcoupe.com/hardfdc.htm <http://www.samcoupe.com/hardfdc.htm> 

 

Also, if of interest to anybody here I do have a couple offers on some hardware 
goodies and a bundle of SAM Revival magazines on the go at the moment -> 
www.samcoupe.com/offers.htm <http://www.samcoupe.com/offers.htm> 

 

Colin

=

Quazar : Hardware, Software, Spares and Repairs for the SAM Coupé

1995-2016 - Celebrating 22 Years of developing for the SAM Coupé

Website: www.samcoupe.com <http://www.samcoupe.com>

 

 

From: owner-sam-us...@nvg.ntnu.no [mailto:owner-sam-us...@nvg.ntnu.no] On 
Behalf Of Thomas Seifert
Sent: 23 May 2016 13:53
To: sam-users@nvg.ntnu.no
Subject: Re: R: Floppy disk drive error

 

if the disk drive is older - like 10 years or more - could be the belt drive 
needs replacing as this is the most

common fault with older SAM Coupe disk drives - you can get these from Colin 
Pigot (drive belts and also disk drives) >> http://www.samcoupe.com/hardware.htm

 

 

Simone Voltolini <simone.voltol...@tin.it <mailto:simone.voltol...@tin.it> > 
schrieb am 14:26 Montag, 23.Mai 2016:

 

I usually clean all my drives heads before use it but the original Citizen 
drives have problems with the BELT.







Kora Sistemi Informatici
Via Cavour 1, 46030 San Giorgio di Mantova MN
Tel/Fax +39 0376 371059
P. IVA: 02048930206




-Messaggio originale-
Da: owner-sam-us...@nvg.ntnu.no <mailto:owner-sam-us...@nvg.ntnu.no>  
[mailto:owner-sam-us...@nvg.ntnu.no <mailto:owner-sam-us...@nvg.ntnu.no> ] Per 
conto di Frode Tennebø
Inviato: lunedì 23 maggio 2016 14:05
A: sam-users@nvg.ntnu.no <mailto:sam-users@nvg.ntnu.no> 
Oggetto: Re: Floppy disk drive error

Benvenuto Paolo,

On 23 May 2016 at 08:53, Paolo Borzini <paolo.borz...@gmail.com 
<mailto:paolo.borz...@gmail.com> > wrote:
> Hello,
> I've a problem with the floppy drive of my sam coupe.
> Typing BOOT or some other command for disk gives me this error "55 
> Missing disk, 0: 1".
> But on manual the errors list ranging from 1 to 54.

No, that's an unfortunate omission from the manual.  Drive belt has been 
mentioned, but it can also be something fishy with the power supply, e.g. not 
delivering enough voltage to the drive.  In very rare cases it can also be the 
disk presence switch which is faulty.  But before you start opening up too much 
- are you sure you are using the correct bay?  On SAM Coupé drive 1 is in the 
left bay, while on SAM Elite drive 1 is in the right bay.

Regards,
-Frode

 



RE: R: Floppy disk drive error

2016-05-23 Thread Colin Piggot
Thanks for the endorsement. 20 odd years of doing stuff, and still going – with 
a few announcements soon about some new stuff that I’m tinkering away on. Next 
up will be SAM Revival issue 26… then after that some hardware…

 

(Who’s not got SAM Revival issue 25 yet? It’s up on eBay with £1 off at the 
moment… http://www.ebay.co.uk/itm/111983342707 :)

 

(And if you have got 25, have you found the hidden part buried inside 
MNEMOtech’s Stars and Sprites megademo? No? Well, you are missing out on Andrew 
Collier’s fantastic coding with his brilliant SAM version of Pang)

 

All the best,

 

Colin

=

Quazar : Hardware, Software, Spares and Repairs for the SAM Coupé

1995-2016 - Celebrating 22 Years of developing for the SAM Coupé

Website: www.samcoupe.com <http://www.samcoupe.com>

 

 

From: owner-sam-us...@nvg.ntnu.no [mailto:owner-sam-us...@nvg.ntnu.no] On 
Behalf Of Simone Voltolini
Sent: 23 May 2016 14:11
To: sam-users@nvg.ntnu.no
Subject: R: R: Floppy disk drive error

 

Yes, I’ve buyed two for mine too from Colin and all works well.


Very professional guy, a MUST in Sam Coupè world ;)



R: R: Floppy disk drive error

2016-05-23 Thread Simone Voltolini
Yes, I’ve buyed two for mine too from Colin and all works well.


Very professional guy, a MUST in Sam Coupè world ;)

 

 

 

 

 

 

 


Kora Sistemi Informatici

Via Cavour 1, 46030 San Giorgio di Mantova MN
Tel/Fax +39 0376 371059
P. IVA: 02048930206

 

 

 

Da: owner-sam-us...@nvg.ntnu.no [mailto:owner-sam-us...@nvg.ntnu.no] Per conto 
di Thomas Seifert
Inviato: lunedì 23 maggio 2016 14:53
A: sam-users@nvg.ntnu.no
Oggetto: Re: R: Floppy disk drive error

 

if the disk drive is older - like 10 years or more - could be the belt drive 
needs replacing as this is the most

common fault with older SAM Coupe disk drives - you can get these from Colin 
Pigot (drive belts and also disk drives) >> http://www.samcoupe.com/hardware.htm

 

 

Simone Voltolini <simone.voltol...@tin.it <mailto:simone.voltol...@tin.it> > 
schrieb am 14:26 Montag, 23.Mai 2016:

 

I usually clean all my drives heads before use it but the original Citizen 
drives have problems with the BELT.







Kora Sistemi Informatici
Via Cavour 1, 46030 San Giorgio di Mantova MN
Tel/Fax +39 0376 371059
P. IVA: 02048930206




-Messaggio originale-
Da: owner-sam-us...@nvg.ntnu.no <mailto:owner-sam-us...@nvg.ntnu.no>  
[mailto:owner-sam-us...@nvg.ntnu.no <mailto:owner-sam-us...@nvg.ntnu.no> ] Per 
conto di Frode Tennebø
Inviato: lunedì 23 maggio 2016 14:05
A: sam-users@nvg.ntnu.no <mailto:sam-users@nvg.ntnu.no> 
Oggetto: Re: Floppy disk drive error

Benvenuto Paolo,

On 23 May 2016 at 08:53, Paolo Borzini <paolo.borz...@gmail.com 
<mailto:paolo.borz...@gmail.com> > wrote:
> Hello,
> I've a problem with the floppy drive of my sam coupe.
> Typing BOOT or some other command for disk gives me this error "55 
> Missing disk, 0: 1".
> But on manual the errors list ranging from 1 to 54.

No, that's an unfortunate omission from the manual.  Drive belt has been 
mentioned, but it can also be something fishy with the power supply, e.g. not 
delivering enough voltage to the drive.  In very rare cases it can also be the 
disk presence switch which is faulty.  But before you start opening up too much 
- are you sure you are using the correct bay?  On SAM Coupé drive 1 is in the 
left bay, while on SAM Elite drive 1 is in the right bay.

Regards,
-Frode