In your schema directory,, grep for 1.3.6.1.4.1.1466.115.121.1.38 and
try to narrow it down to which file the bad schema is in.. .
On 06/05/2012 05:13 AM, Cédric Carlen wrote:
Hello,
I reup my topic, because i don't find something interessant on the Net.
I've try to delete ppolicy.schema but
First, I'm not sure if your speaking of samba4 or just upgrading your s3
domain structure .. my comments are based on samba4 hope it helps ..
Policies: -- Group policy works with S4.. So whatever group policies you
can set in windows DC you can set on the S4 dcs..
Scalability -- 1PDC and
On 05/16/2012 11:19 AM, Jorell wrote:
On 5/15/2012 12:36 PM, Aaron E. wrote:
You can copy /usr/local/samba/private and /usr/local/samba/etc
directories to the new machine with the new samba compiled install.
You will also need to rsync /usr/local/samba/var/locks/sysvol to the new
machine
You can copy /usr/local/samba/private and /usr/local/samba/etc
directories to the new machine with the new samba compiled install.
You will also need to rsync /usr/local/samba/var/locks/sysvol to the new
machine but you need to do this with ntacl support using rsync I have
found works as it
to the share via
\\name so I strayed away from the keytab being the problem as it did
work to some degree..
Thanks for the reply and keep up the good work Andrew!!
On 05/10/2012 06:54 PM, Andrew Bartlett wrote:
On Wed, 2012-05-09 at 09:37 -0400, Aaron E. wrote:
The problem came right back after
The problem came right back after I posted that it was fixed after being
compiled... I've been doing much more troubleshooting trial and error
with options in smb.conf.. Here is a debug of the machine..
Machine Details Samba4 Domain,, Samba3 Print server, Windows 2008 R2
[2012/05/09
I'm beating my head up against the wall here.. Need some extra eyes!!!
Setup -- Samba4 Domain Controller and samba3 print server.. DNS
FlatFile,, All dns works..
Issue, When I browse to the print Server vi \\IP-Address I am able to
connect just fine.. When I browse using \\netbios-name I
I would like to add that kinit works just fine also..
On 05/04/2012 11:51 AM, Aaron E. wrote:
I'm beating my head up against the wall here.. Need some extra eyes!!!
Setup -- Samba4 Domain Controller and samba3 print server.. DNS
FlatFile,, All dns works..
Issue, When I browse to the print
server distros as I
run across this more and more as time goes on..
On 05/04/2012 11:54 AM, Aaron E. wrote:
I would like to add that kinit works just fine also..
On 05/04/2012 11:51 AM, Aaron E. wrote:
I'm beating my head up against the wall here.. Need some extra eyes!!!
Setup -- Samba4 Domain
No Problem You'll just need the proper filesystem iee ext3, ext4 on
the partition your home folders will be on..
On 05/02/2012 10:52 AM, zingalo wrote:
Hi,
i have a debian server with 2 hd, sda and sdb.
Debian is installed in sda1.
I'll create an home folder for every user. He will login
these directory will be mount from the clients
after the user login.
What are the possibility?
- insert in /etc/fstab two line to mount the /user_data and /usersHomes?
- or autofs?
Thanks again
On 05/02/2012 05:02 PM, Aaron E. wrote:
No Problem You'll just need the proper filesystem iee
Make sure you can look up users with wbinfo if not fillow the samba4
winbind wiki..
On 03/30/2012 06:23 PM, sandy.napo...@eccmg.cupet.cu wrote:
Hello list, Look at it
chown pepe Temp
chown: invalid user: `pepe'
Where pepe es a users tha was create in active directory, it problem is in
samba4
you can set default permissions on the share folder using something like
this.. setfacl -m default:group:gid:perms folder -- default perms are
inherited..
On 03/30/2012 07:29 AM, lejeczek wrote:
actually it gets even more weird, from my perspective at least
maybe it all works but not for
I just took the smb3 init script and edited / commented out what wasn't
relevent..
On 02/23/2012 02:04 AM, Michael Wood wrote:
On 22 February 2012 23:13, timothy mcdanieltimnb...@gmail.com wrote:
Is there a startup script for ubuntu 10.04.1 LTS for samba4 alpha 18?
Please could someone
The permissions are slightly different for s4, as in you will be setting
most of the folder perissions at the windows level. Youll need to make
sure that user_xattr and acl is enabled for the filesystem.
You can't really chmod per say, youll need to access the security tab
for the share and
-technical IRC, was advised that
samba-tool ntacl was more for scripting than actual management at this
point in time..
I believe you'll get better results with tieing up a windows box..
On 02/16/2012 12:31 PM, steve wrote:
On 02/16/2012 03:48 PM, Aaron E. wrote:
The permissions are slightly
Setting the Permissions in windows is easy, browse to your server like
so..start run \\server
right click share properties, security tab -- if your unfamiliar
with windows permissions I would read up on those..
being doable in linux,, hmm I'm sure it is but as I said I would create
a
Unfortunately, 2008 servers require AD to function properly with
licensing. This question has been posed a few times and that was the
conclusion. It works with S4 but not s3,,
I had a third party seem to get this working on a test server with
adding extra samba/ldap schemas but have never
Nope, R1 was the version I was first working with..
On 02/13/2012 12:04 PM, Gaiseric Vandal wrote:
Any chance you can downgrade to Win 2008 (not R2?)
On 02/13/2012 11:21 AM, Stuart Bailey wrote:
Thanks,
I'll see if we can upgrade to S4.
On Monday 13 February 2012 16:00:13 Aaron E. wrote
This may help you out..
https://wiki.samba.org/index.php/Samba4/Winbind
On 02/09/2012 07:17 AM, Brantley Hobbs wrote:
On Wed, Feb 8, 2012 at 5:31 PM, William Brown
william.e.br...@adelaide.edu.au wrote:
You likely don't have ACL's enabled on the filesystem that samba is sharing.
You can
This group should be predefined on the Windows server,, It is in the
local users and groups (not domain).. I believe all servers have this
group.. Create a domain group add this domain to the local group and add
users to the domain group.. whalla..
On 02/07/2012 10:59 AM, Fergus M wrote:
On
I'll take a wild stab at this one though someone will probably correct
me.. I have not set up winbind4 but this is my take on it..
First, check your /etc/nsswitch.conf file and verify that you have
something similar to the following.. winbind needs to be there to work..
Unless it's changed in
I can confirm that this is an issue. We went through this to great
lengths. I can also confirm that after you install the licensing it will
not keep track of the issued calls properly. I also remember that since
it isn't working properly that you may still be on the temporary install
and after
If I understand you properly, I believe you want to disable or enable
pending on what you need these two settings in cupsd.conf
Browsing on/off
BrowseAllow None/All
On 01/25/2012 11:28 AM, Yécine Allouache wrote:
Hello,
I'm on a debian Squeez and I use Samba 3.5.6 and CUPS 1.4.4
When I
You could turn off the Windows Automatic printer find feature? That
would stop the printers that are found and Tagged Auto I believe..
Windows searches the network for shared printers and will auto add the
printer if this is turned on and they will be tagged as Auto..
My first post is
Oh man well that is good to know!! I was assuming that if things should
go real wrong I would be able to backpedal and do handstands!!
On 01/12/2012 10:01 AM, Adam Tauno Williams wrote:
Quoting Deyan Stoykov dstoy...@uni-ruse.bg:
I'm looking into using this tool for migration to samba4,
Check out SASL library's
On 01/10/2012 04:35 PM, steve wrote:
On 01/10/2012 09:50 PM, Amit More wrote:
Hello All,
I want to authenticate existing LDAP users to samba shares. From what
i have been reading, it seems like there are two ways to achieve this
1. Configure samba to use plaintext
Check your extended ACL permissions and verify that they are enabled for
your kernel..
On 01/03/2012 09:05 AM, Stefan Horning wrote:
Hello list members,
my name is Stefan, this is my first post to this Mailinglist, so please
bear with me. ;)
I am working as a Network Administrator of a small
I have a s3.4 pdc with a bdc,, pdc is serving around 80 users on
terminal services and another 50 fat clients,,, acts as the file
server.. roaming profiles etc... I have no issues other than the network
card only being 100mb,, I do have a throughput issues.. but that is on
the table..
On
that drove me nuts also, I just change it in the smb.conf, though it
still seems to populate the smbd.log with some items, that might be just
restarting the daemon..
On 11/22/2011 10:52 AM, John Heim wrote:
Obviously this is not a very important question but I was wondering why
the convention
We've changed the password for the administrator account, once it was
changed a few minutes later the administrator account locked out,
Something is set to log in as admin on our network whether it be a share
set up with those credentials,, not sure at this point..
I'm having trouble finding
Sounds like you've checked mostly all except your ldap backend...
Check your LDAP DB for... (they will be in nix timestamp)
sambaPasswordCanChange
sambaPasswordLastSet
sambaPasswordMustChange
setup smbldap-tools package
On 10/13/2011 11:00 PM, Jeffrey Chan wrote:
I'm using OpenLDAP as
Just cuirous are you using pam or ldap backend?
On 10/12/2011 09:22 AM, Marco Ciampa wrote:
On Wed, Oct 12, 2011 at 12:15:16PM +0800, Jeffrey Chan wrote:
Hi all,
I've posted this a month ago but haven't gotten a reply. Can anyone please
help?
- Jeff
On Mon, Aug 29, 2011 at 5:14 PM,
I believe I remember seeing a similar thread and it was
disabling oplocks in samba ?
On 10/12/2011 10:30 AM, free...@gmx.ch wrote:
Hi Listmembers
Problem:
Windows Clients having problems with Microsoft Office App's (Excel, Word) when the files
are on the Samba Share documents (which is
I'm gong to go out on a limb here and say the process will need tested
on your end. In my experience what has worked for one site has not
worked for another.
It is all about getting the procedure right for your site. That being
said the procedure you linked usually works pretty well when
clear the logs and monitor for a few days,, If there is not real
activity just shut down the service and see if anyone complains they
can't access something.. After a few days/weeks/months pull the server.
Might not be the perfect scenario but if smbstatus isn't displaying what
you need then
First you have to install a Printer in Cups, then reload samba. Verify
you can see the shared printer through windows..
You'll need to use the net rpc command to grant the rights to add the
print drivers to the $print share. Read the following section for print
rights..
Administering User
I vote for ext4 also, we have been running on that for a few years with
no issues..
On 06/24/2011 10:22 AM, Gary Dale wrote:
On 24/06/11 09:46 AM, John G. Heim wrote:
I'm setting up a new linux fileserver and I was wondering if samba
likes one filesystem more than another. I have to format a
In my experience this is due to gssapi not being compiled to the correct
directory for bind.. I also used 11.04 and my compile path was
--with-gssapi=/usr/include/gssapi,, instead of /usr
On 06/21/2011 10:45 AM, Marcel Ritter wrote:
Hi Mauricio,
this is usually caused by one of 3 things:
In the samba share definition you could add
valid users = +group
this should have the effect your looking for if I understand you
correctly. If not my apologies..
On 06/17/2011 12:28 PM, John McNulty wrote:
Hi.
I have some shares on a server that are offered to specific Active Directory
I believe it takes the name from either the,
netbios name =
or
server string = x
in the smb.conf file.
On 05/27/2011 05:50 AM, fsos...@gmail.com wrote:
Hello,
I would like to know where samba takes the computer name to join the
AD domain. Is it from classic computer name DNS
First, Thanks for any and all help
I can't seem to figure out what I need to do, I've been fighting this
for a month and am now beating my head off my desk with no solution to
be found. I've read others having this issue but they were all older
versions.. I am using 3.5.4,, Please read
. This is not a solution but may be will help locate the problem.
On 05/25/2011 12:16 PM, Aaron E. wrote:
First, Thanks for any and all help
I can't seem to figure out what I need to do, I've been fighting this
for a month and am now beating my head off my desk with no solution to
be found. I've read
I guess the client/server question is a moot point as I don't even have
winbind running on my DC..
On 05/25/2011 04:09 PM, Aaron E. wrote:
Ah, a new avenue to look down..
winbind cache was 300, idmap cache is set to 7 days so I changed them
both to 60 seconds restarted services and rejoined
If you require and more information let me know and thanks in advance ..
I'm working with dansguardian and squid with ntlm_auth.
I join squid to the domain and it works for 7 days. After 7 days to the
minute from the time I joined the server to the domain winbind decides
it has lost its
Glad I could help, as far as your last question, I'll have to let
someone else answer that one.. I don't know enough about it to make that
determination.
On 05/12/2011 12:09 PM, fe...@epepm.cupet.cu wrote:
Thanks a lot for your hint.
I finally made it in Debian Lenny (with Samba4 alpha15 and
did you compile bind with gssapi? my compile options with ubuntu are
this..Verify your pointing to the proper path when compiling for gssapi.
./configure --prefix=/usr/local/bind9 --with-gssapi=/usr/include/gssapi
verify that you have the proper environments in bind,,, I have this in
the init
See what wbinfo --name-to-sid (group) reports for both groups , also did
you change the ACL in squid to point to the new group?
On 05/05/2011 09:32 AM, olaf.bo...@hvbg.hessen.de wrote:
Hi!
More than a week ago I sent the below-mentioned message but did not receive any
answer.
I think that the
Once you try that then try converting the opposite like so..
wbinfo --sid-to-uid (sid from previous step)
On 05/05/2011 03:16 PM, Aaron E. wrote:
See what wbinfo --name-to-sid (group) reports for both groups , also did
you change the ACL in squid to point to the new group?
On 05/05/2011 09:32
If you read samba-technical sorry for the double read, I accidentally
posted this over there earlier..
I'm still working on possible upgrade to samba4 and will be in testing
on that for a long while, but in the mean time I need to at least get a
Windows 2008 Terminal
Does the file system your working with support ACL? IS it set to use
acls in the /etc/fstab?
On 04/29/2011 06:24 AM, Arnaud Lesauvage wrote:
Hi list !
I have found someone having a similar problem back in 2007
(http://lists.samba.org/archive/samba/2007-April/131574.html), but as I
understand
Windows PDC?
Does wbinfo -u return a list of domain users?
On 04/29/2011 09:44 AM, Arnaud Lesauvage wrote:
Le 29/04/2011 14:45, Aaron E. a écrit :
Does the file system your working with support ACL? IS it set to use
acls in the /etc/fstab?
Hi Aaron, thanks for your answer.
Yes, it is set
Our current infrastructure is Openldap back end with samba3 pdc. With
2003 terminal servers Using poledit.exe with policies..
We are in need of upgrade of our terminal servers. I cannot get the old
way of policies to lock the server down as I need to function on Windows
Server 2008.
What
Another Idea I was thinking was to migrate to Windows AD then Migrate to
Samba4 but this seems like a long process.. Thoughts?
On 04/05/2011 11:58 AM, Aaron E. wrote:
Our current infrastructure is Openldap back end with samba3 pdc. With
2003 terminal servers Using poledit.exe with policies
here's one I put together and it works pretty good. I took parts from
various net research and came up with this, I have since gathered a
better understanding and probably should rewrite it without the killall
statement but Ill save that for another day..
Edit paths accordingly..
#!
I'm looking to migrate to samba4 AD domain from samba3 but this will not
happen over night, I plan on slowly migrating which brings me to acl
issues,
I will be creating a new domain but still need to have a single data store.
IS this something that can just have a domain trust built?
Can I
What is the trick to getting a Windows 2008 R1 32bit server to connect
to a samba print share?
Error = Windows could no connect to printer, Operation could not be
completed (error 0x6d1)
My configuration is this..
Samba4 PDC
Samba3 print server
windows 2008 TS server
Everything
I've seen people mention an Samba4 Alpha 15, though I can't seem to find
it on the samba ftp. Where can I get the source for this if it is available?
Thanks
Aaron
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
Is this possibly a caching issue? I had some problems with nfs file
share that sounded somewhat like this and it turned out to be caching. I
disabled caching on the mount and it all worked perfectly.
On 02/08/2011 10:16 AM, Volker Lendecke wrote:
On Tue, Feb 08, 2011 at 03:51:26PM +0100,
I'm looking for direction on converting from openldap / samba3 backend
to samba4.
At this point I've got my samba4 domain provisioned and working and I
now want to start importing users but for the life of me I can't find
any information on the net about the process.
Few questions.
Do I
I believe you need to put the .bat scripts in a subdirectory of
netlogon/scripts in order for the script to be found and run...
On 11/19/2010 08:05 AM, Daniel Müller wrote:
I think you meant script per each user?
Then you need exactly logon script = %u.bat
%u substitutes the login user name.
Other items to check are,
1. can you ping by hostname
2. can you ping by ip
a. if you cannot by hostname then you have a DNS issue,
3. What type of firewall is between? Check the configuration..
4. Check the firewall configuration on your samba server. (fedora has
most items blocked by
I would verify the routing table on the server. This sounds like the
default gateway isn't set or the server doesn't know how to reach the
other networks.
try # route
and examine the table.
On 11/11/2010 06:17 AM, *...@ppu wrote:
hi all,
i have integrated SAMBA with active directory and
I'm using samba 3.4 with ldap backend, I'm trying to get a mandatory
profile working with 4 of my floor machines.
I can't seem to get the proper permissions in order for all 4 users to
pull this profile. Only the owner of the profile can use even if I set
the permissions to 777 on the
security = domain or security = user?
I had problems with winbind using security = user.. I can't remember
properly it's been a while..
On 11/11/2010 04:22 PM, Rowley, Mathew wrote:
I had to downgrade samba on a rh5.5 instance due to ntlm_auth not working properly:
65 matches
Mail list logo