[speedtouch] Re: Speedtouch and LAN with static IP and Gateway [Resolved]

[C A Tomy]

Hi Duncan,
The problem got resolved.As you suggested I disabled adummy in the kernel and 
in addition enabled   Lan Emulation Support.Then I configured nas0 with the 
following command:  

#br2684ctl -b -c 0 -a 8.35 
#ifconfig nas0 10.200.3.190 netmask 255.255.0.0
#route add default gw 10.200.1.1

I thank you and Gilles for the suggestions that helped me resolve the problem. 
The discussions with you two were indeed a learning experience for me.

Tommy

-Original Message-
From: [EMAIL PROTECTED] on behalf of Duncan Sands
Sent: Tue 9/11/2007 2:25 PM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch  and LAN with static IP and Gateway
 

Hi Tomy, I think the problem is that the packets are going to the adummy
driver.  Here you can see that interface 0 is adummy:

 Itf TypeESI/MACaddr AAL(TX,err,RX,err,drop) ...   [refcnt]
 
   0 adummy    0 ( 0 0 0 0 0 )  5 ( 3988 0 0 0 0 )   [4]
 
   1 speedtch0090d04e4916  0 ( 0 0 0 0 0 )  5 ( 0 0 0 0 0 )  [1]

And here you can see that 8.35 is going to interface 0:

 Itf VPI VCI   AAL RX(PCR,Class) TX(PCR,Class)
 
   0   835 5 0 UBR 0 UBR   CLIP, Itf:atm0, Encap:None
 
   0   0 5 5 0 UBR 0 UBR
 
   0   016 5 0 UBR 0 UBR

I notice from dmesg that adummy appears early:

 netconsole: not configured, aborting
 adummy: version 1.0
 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

so I'm guessing you have it compiled in.  I suggest you don't
bothering compiling it at all.

Ciao,

Duncan.

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]




-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[Duncan Sands]

Hi Tomy, I think the problem is that the packets are going to the adummy
driver.  Here you can see that interface 0 is adummy:

 Itf TypeESI/MACaddr AAL(TX,err,RX,err,drop) ...   [refcnt]
 
   0 adummy    0 ( 0 0 0 0 0 )  5 ( 3988 0 0 0 0 )   [4]
 
   1 speedtch0090d04e4916  0 ( 0 0 0 0 0 )  5 ( 0 0 0 0 0 )  [1]

And here you can see that 8.35 is going to interface 0:

 Itf VPI VCI   AAL RX(PCR,Class) TX(PCR,Class)
 
   0   835 5 0 UBR 0 UBR   CLIP, Itf:atm0, Encap:None
 
   0   0 5 5 0 UBR 0 UBR
 
   0   016 5 0 UBR 0 UBR

I notice from dmesg that adummy appears early:

 netconsole: not configured, aborting
 adummy: version 1.0
 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

so I'm guessing you have it compiled in.  I suggest you don't
bothering compiling it at all.

Ciao,

Duncan.

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[Gilles Espinasse]

- Original Message - 
From: C A Tomy [EMAIL PROTECTED]
To: speedtouch@ml.free.fr
Sent: Sunday, September 09, 2007 4:53 AM
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway


...
 
 Yes I tried it. The result was Destination host unreachable
 
 Tommy
 
Where is your ISP website?
Is there driver available to dowload?

Gilles

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

 





Where is your ISP website?
Is there driver available to dowload?

Gilles
 

I am working in one of educational institutions in India. It provides internet 
facility through a 2 Mbps leased line (RF) connectivity with VSNL, India. 
Internet services are provided through an external router and a firewall. Our 
office computers are connected to a LAN through Ethernet. From the residences 
on campus we are connected to the LAN through ADSL connection using Speed Touch 
USB (green one).

 

The machine at my residence is a dual boot system with Gentoo and Windows XP. I 
do not have any problem connecting the net from my window partition. The only 
thing I needed to do was to install the driver and configure the adsl 
connection by providing required TCP/IP values. There are no  drivers avilable 
for download at the website. 

 

I am quite new this place and every one I know of uses Windows to access the 
net from their residences. And there does not appear to be a  community of 
Linux users around. 

 

Tommy



Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] 

   


-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

 



From: [EMAIL PROTECTED] on behalf of Gilles Espinasse
Sent: Sat 9/8/2007 2:29 PM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway





- Original Message -
From: C A Tomy [EMAIL PROTECTED]
To: speedtouch@ml.free.fr
Sent: Saturday, September 08, 2007 5:27 AM
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway


  Is it possible to make configuation based on br2684 that uses amarpd.
You do not need both together.
Both are parts of old 1483 and new 2684 RFC.
They are two different protocols :
- atmarp/atmarpd is for routed IP
- br2684 is for bridged ethernet
br2684 is courantly used with PPPoE but PPPoE is not the only br2684
solution. You should be able to use with a static IP (and maybe too with
dhcp / not so sure).


My network does not support dhcp. So what options are left for me? 

Tommy



  If so how is it done?
  Some time back, I assumed my connection to be PPPoE and tried
  to configure my connection. But this is what I got :

 localhost peers # br2684ctl -b -c 0 -a 8.35 

  sleep 5
 br2684ctl[7028]: Interface nas0 created sucessfully
 br2684ctl[7028]: Communicating over ATM 0.8.35, encapsulation: LLC
 br2684ctl[7028]: Interface configured
 localhost peers # ifconfig nas0 10.200.3.190 netmask 255.255.0.0 
  sleep 10 
 localhost peers # route add default gw 10.200.1.1
 localhost peers # pppd call speedtch
There, you should test :
- if pinging the gateway work,
- then test to ping numerical google IP 209.85.129.104
That will work if PPPoE is not required.
- then test www.google.com
that will work if dns are properly set

Gilles


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

   



-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[Gilles Espinasse]

- Original Message - 
From: C A Tomy [EMAIL PROTECTED]
To: speedtouch@ml.free.fr
Sent: Saturday, September 08, 2007 12:43 PM
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway



   Is it possible to make configuation based on br2684 that uses amarpd.
 You do not need both together.
 Both are parts of old 1483 and new 2684 RFC.
 They are two different protocols :
 - atmarp/atmarpd is for routed IP
 - br2684 is for bridged ethernet
 br2684 is courantly used with PPPoE but PPPoE is not the only br2684
 solution. You should be able to use with a static IP (and maybe too with
 dhcp / not so sure).


 My network does not support dhcp. So what options are left for me?

That should have been clear from the above lines.
Use a static IP and gateway

   If so how is it done?
   Some time back, I assumed my connection to be PPPoE and tried
   to configure my connection. But this is what I got :
 
  localhost peers # br2684ctl -b -c 0 -a 8.35 
 
   sleep 5
  br2684ctl[7028]: Interface nas0 created sucessfully
  br2684ctl[7028]: Communicating over ATM 0.8.35, encapsulation: LLC
  br2684ctl[7028]: Interface configured
  localhost peers # ifconfig nas0 10.200.3.190 netmask 255.255.0.0 
   sleep 10 
  localhost peers # route add default gw 10.200.1.1
  localhost peers # pppd call speedtch
 There, you should test :
 - if pinging the gateway work,
 - then test to ping numerical google IP 209.85.129.104
 That will work if PPPoE is not required.
 - then test www.google.com
 that will work if dns are properly set

Have you tested once IP and gateway are set, if ping work?
If you don't have a login/password, PPPoE is unlikely to be used.

Gilles


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

 



From: [EMAIL PROTECTED] on behalf of Gilles Espinasse
Sent: Sat 9/8/2007 8:32 PM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway





- Original Message -
From: C A Tomy [EMAIL PROTECTED]
To: speedtouch@ml.free.fr
Sent: Saturday, September 08, 2007 12:43 PM
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway



   Is it possible to make configuation based on br2684 that uses amarpd.
 You do not need both together.
 Both are parts of old 1483 and new 2684 RFC.
 They are two different protocols :
 - atmarp/atmarpd is for routed IP
 - br2684 is for bridged ethernet
 br2684 is courantly used with PPPoE but PPPoE is not the only br2684
 solution. You should be able to use with a static IP (and maybe too with
 dhcp / not so sure).


 My network does not support dhcp. So what options are left for me?

That should have been clear from the above lines.
Use a static IP and gateway

   If so how is it done?
   Some time back, I assumed my connection to be PPPoE and tried
   to configure my connection. But this is what I got :
 
  localhost peers # br2684ctl -b -c 0 -a 8.35 
 
   sleep 5
  br2684ctl[7028]: Interface nas0 created sucessfully
  br2684ctl[7028]: Communicating over ATM 0.8.35, encapsulation: LLC
  br2684ctl[7028]: Interface configured
  localhost peers # ifconfig nas0 10.200.3.190 netmask 255.255.0.0 
   sleep 10 
  localhost peers # route add default gw 10.200.1.1
  localhost peers # pppd call speedtch
 There, you should test :
 - if pinging the gateway work,
 - then test to ping numerical google IP 209.85.129.104
 That will work if PPPoE is not required.
 - then test www.google.com
 that will work if dns are properly set

Have you tested once IP and gateway are set, if ping work?
If you don't have a login/password, PPPoE is unlikely to be used.


Gilles


I suppose in his reply to my initial posting, Duncan was telling me how to set 
up a speedtouch-usb connection with static ip and gateway using amarpd.  When I 
tried this method, though I failed to ping, at least I do not get the error 
network not reachable. But I have so far not been sucessful with this method. 
So, it seems the other option that is left for me PPPoA. That takes me back to 
my original posting. How to confiure PPPoA connection with static IP and static 
gateway. I know that I can give static IP of my mechine in /etc/ppp/options. 
But where to give static gateway? And if it could be given, what is the syntax? 

Tommy


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

   



-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[Duncan Sands]

Hi Tomy,

 AAL5: tx 0 ( 0 err ), rx 0 ( 0 err, 0 drop )

this shows that no packets reached the speedtch driver, let alone
the modem - not surprising that you're not seeing much connectivity!
Something fundamental is broken in the way you have things configured.
Perhaps you could paste *exactly* the commands you used to configure
(with any output, errors etc).  Also, it may be worth sending the
output of dmesg.

Ciao,

Duncan.

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[Gilles Espinasse]

- Original Message - 
From: C A Tomy [EMAIL PROTECTED]
To: speedtouch@ml.free.fr
Sent: Saturday, September 08, 2007 7:30 PM
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway

...
 I suppose in his reply to my initial posting, Duncan was telling me how
 to set up a speedtouch-usb connection with static ip and gateway using
amarpd.
Read the first answer made by Duncan
It start with
This assumes your ISP is using routed ip.
It is probably not the case.

 When I tried this method, though I failed to ping, at least I do not get
 the error network not reachable. But I have so far not been sucessful
 with this method.
 So, it seems the other option that is left for me PPPoA.

No
First PPPoA like PPPoE is always used with a login / password.
If you do not have both, this is the sign that it is not the protocol you
use.
Have you tried bridged ethernet and static IP?

br2684ctl -b -c 0 -a 8.35 
ifconfig nas0 10.200.3.190 netmask 255.255.0.0
route add default gw 10.200.1.1
ping 10.200.1.1

ping 209.85.129.104

ping www.google.com
...
 That takes me back to my original posting.
 How to confiure PPPoA connection with static IP and static gateway.
That's never done that way.
Usually, you are authentified with your login / password.
Depending of the ISP settings, you receive an IP that is always the same or
a different oneat each time.

 I know that I can give static IP of my mechine in /etc/ppp/options.
Yes theorically like you may have a ppp session without login /password.
But we never saw an adsl ISP configured like that.
There is a technical reason to authentification the connection on a network
shared by different ISP.
Authentification allow to redirect the traffic to the ISP corresponding
where the user have payed for.

 But where to give static gateway? And if it could be given, what is the
syntax?
Gateway is usually received from ppp negociation.
Consider that if you don't have a login / password, you do not have
PPPo(A|E)

Gilles


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

 



From: [EMAIL PROTECTED] on behalf of Duncan Sands
Sent: Sun 9/9/2007 1:11 AM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway




Hi Tomy,

 AAL5: tx 0 ( 0 err ), rx 0 ( 0 err, 0 drop )

this shows that no packets reached the speedtch driver, let alone
the modem - not surprising that you're not seeing much connectivity!
Something fundamental is broken in the way you have things configured.
Perhaps you could paste *exactly* the commands you used to configure
(with any output, errors etc).  Also, it may be worth sending the
output of dmesg.

Ciao,

Duncan.


Hi Duncan,

Here is the set of commands exactly as I  used to configure the connection:

localhost ~ # atmsigd -b

localhost ~ # ilmid -b

localhost ~ # echo starting atmarpd server:

starting atmarpd server:

localhost ~ # atmarpd -b -l syslog

localhost ~ # atmarp -c atm0

localhost ~ # ifconfig atm0 10.200.3.190 netmask 255.255.0.0 mtu 1500 up

localhost ~ # atmarp -s 10.200.1.1 8.35 null

localhost ~ # route add default gw 10.200.1.1

localhost ~ # ping 10.200.1.1

PING 10.200.1.1 (10.200.1.1) 56(84) bytes of data.

 

--- 10.200.1.1 ping statistics ---

29 packets transmitted, 0 received, 100% packet loss, time 28009ms

 

localhost ~ # 

The output of 'dmesg' runs as follows:

Linux version 2.6.21-gentoo-r4 ([EMAIL PROTECTED]) (gcc version 4.1.2 (Gentoo 
4.1.2)) #16 SMP Thu Sep 6 20:50:49 IST 2007

BIOS-provided physical RAM map:

sanitize start

sanitize end

copy_e820_map() start:  size: 0009fc00 end: 
0009fc00 type: 1

copy_e820_map() type is E820_RAM

copy_e820_map() start: 0009fc00 size: 0400 end: 
000a type: 2

copy_e820_map() start: 000f size: 0001 end: 
0010 type: 2

copy_e820_map() start: 0010 size: 176f end: 
177f type: 1

copy_e820_map() type is E820_RAM

copy_e820_map() start: 177f size: 3000 end: 
177f3000 type: 4

copy_e820_map() start: 177f3000 size: d000 end: 
1780 type: 3

copy_e820_map() start: fec0 size: 1000 end: 
fec01000 type: 2

copy_e820_map() start: fee0 size: 1000 end: 
fee01000 type: 2

copy_e820_map() start: ffb0 size: 0050 end: 
0001 type: 2

 BIOS-e820:  - 0009fc00 (usable)

 BIOS-e820: 0009fc00 - 000a (reserved)

 BIOS-e820: 000f - 0010 (reserved)

 BIOS-e820: 0010 - 177f (usable)

 BIOS-e820: 177f - 177f3000 (ACPI NVS)

 BIOS-e820: 177f3000 - 1780 (ACPI data)

 BIOS-e820: fec0 - fec01000 (reserved)

 BIOS-e820: fee0 - fee01000 (reserved)

 BIOS-e820: ffb0 - 0001 (reserved)

0MB HIGHMEM available.

375MB LOWMEM available.

found SMP MP-table at 000f4a60

Entering add_active_range(0, 0, 96240) 0 entries of 256 used

Zone PFN ranges:

  DMA 0 - 4096

  Normal   4096 -96240

  HighMem 96240 -96240

early_node_map[1] active PFN ranges

0:0 -96240

On node 0 totalpages: 96240

  DMA zone: 32 pages used for memmap

  DMA zone: 0 pages reserved

  DMA zone: 4064 pages, LIFO batch:0

  Normal zone: 719 pages used for memmap

  Normal zone: 91425 pages, LIFO batch:31

  HighMem zone: 0 pages used for memmap

DMI 2.2 present.

Using APIC driver default

ACPI: RSDP 000F6470, 0014 (r0 IntelR)

ACPI: RSDT 177F3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD0)

ACPI: FACP 177F3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD0)

ACPI: DSDT 177F30C0, 4152 (r1 INTELR AWRDACPI 1000 MSFT  10C)

ACPI: FACS 177F, 0040

ACPI: APIC 177F7240, 0054 (r1 IntelR AWRDACPI 42302E31 AWRD0)

ACPI: PM-Timer IO Port: 0x408

ACPI: Local APIC address 0xfee0

ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

Processor #0 15:1 APIC version 20

ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0])

IOAPIC[0]: apic_id 2, version 32, address 0xfec0, GSI 0-23

ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

ACPI: IRQ0 used by override.

ACPI: IRQ2 used by override.

ACPI: IRQ9 used by override.

Enabling APIC mode:  Flat.  Using 1 I/O APICs

Using ACPI (MADT) for SMP configuration information

Allocating PCI resources starting at 2000 (gap: 1780:e740)

Built 1 zonelists.  Total pages: 95489

Kernel command line: root=/dev/hda3 gentoo=nodevfs 
video=vesafb:mtrr:3,ywrap,[EMAIL PROTECTED]

mapped APIC to d000 (fee0)

mapped IOAPIC to c000 (fec0)

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Initializing CPU#0

PID hash table entries: 2048 (order: 11

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

 



From: [EMAIL PROTECTED] on behalf of Gilles Espinasse
Sent: Sun 9/9/2007 3:05 AM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway





First PPPoA like PPPoE is always used with a login / password.
If you do not have both, this is the sign that it is not the protocol you
use.
Have you tried bridged ethernet and static IP?

br2684ctl -b -c 0 -a 8.35 
ifconfig nas0 10.200.3.190 netmask 255.255.0.0
route add default gw 10.200.1.1
ping 10.200.1.1

ping 209.85.129.104

ping www.google.com

Gilles


Yes I tried it. The result was Destination host unreachable

Tommy

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

   



-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

-Original Message-
From: [EMAIL PROTECTED] on behalf of Duncan Sands
Sent: Thu 9/6/2007 5:25 PM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch  and LAN with static IP and Gateway
 

Hi Tommy,

 localhost tomy # atmarp -s 10.200.1.1 8.35 null
 atmarp: Address already in use

this Address already in use is not good.  Is this
the second time you did this?

D.

Hi Duncan,

That is right. I did it a second time. However, I sent the contents of the 
files in /proc/net/atm after after a reboot and a re-run of the commands you 
sent me. 

Tommy

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]




-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[Duncan Sands]

 /proc/net/atm/speedtch:1
 Speed Touch USB  (usb-:00:1d.0-2)
 MAC: 00:90:d0:4e:49:16
 AAL5: tx 0 ( 0 err ), rx 0 ( 0 err, 0 drop )
 Line up

Was this after trying to ping the gateway?  If not,
please try pinging the gateway, then send the contents
of this file again.

Thanks,

Duncan.

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

 



From: [EMAIL PROTECTED] on behalf of Gilles Espinasse
Sent: Fri 9/7/2007 2:00 PM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway




Selon C A Tomy [EMAIL PROTECTED]:

Given the settings you send us on windows
 Connection
 VPI 8
 VCI 35
 Type: RFC 1483B
 Encapsulation: LLC
 FCS: Automatic

I think you should not add 'null' to
 localhost tomy # atmarp -s 10.200.1.1 8.35 null

null equal VCMux encapsulation and you need LLC encapsulation.
As LLC/SNAP is the default encapsulation value for atmarp, you don't need to add
anything after, so that should be better with :

atmarp -s 10.200.1.1 8.35

Gilles


I tried both 'atmarp -s 10.200.1.1 8.35' and 'atmarp -s 10.200.1.1 8.35 null' . 
But  in either case, piniging my gateway is not sucessful.

Tommy

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

   



-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[Gilles Espinasse]

Selon C A Tomy [EMAIL PROTECTED]:

 I tried both 'atmarp -s 10.200.1.1 8.35' and 'atmarp -s 10.200.1.1 8.35 null'
 . But  in either case, piniging my gateway is not sucessful.

 Tommy

Maybe you did not use routed IP.
Instead a configuration based on br2684 usage may be needed.

Gilles

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

 



From: [EMAIL PROTECTED] on behalf of Duncan Sands
Sent: Fri 9/7/2007 2:08 PM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway




 /proc/net/atm/speedtch:1
 Speed Touch USB  (usb-:00:1d.0-2)
 MAC: 00:90:d0:4e:49:16
 AAL5: tx 0 ( 0 err ), rx 0 ( 0 err, 0 drop )
 Line up

Was this after trying to ping the gateway?  If not,
please try pinging the gateway, then send the contents
of this file again.

Thanks,

Duncan.


Hi Duncan,

This is how the contents of the various files in my /proc/net/atm look after I 
tried to ping:

/proc/net/atm/adummy:0

version 1.0

 

/proc/net/atm/arp

IPitf TypeEncp Idle IP address  ATM address

atm0  PVC NULL   75 10.200.1.1  0.8.35

 

/proc/net/atm/br2684

empty

 

/proc/net/atm/devices

 

Itf TypeESI/MACaddr AAL(TX,err,RX,err,drop) ...   [refcnt]

  0 adummy    0 ( 0 0 0 0 0 )  5 ( 3988 0 0 0 0 )   [4]

  1 speedtch0090d04e4916  0 ( 0 0 0 0 0 )  5 ( 0 0 0 0 0 )  [1]

/proc/net/atm/lec

Itf  MAC  ATM destination  Status
Flags VPI/VCI Recv VPI/VCI

 

 

/proc/net/atm/mpc

QoS entries for shortcuts:

IP address

  TX:max_pcr pcr min_pcr max_cdv max_sdu

  RX:max_pcr pcr min_pcr max_cdv max_sdu

 

/proc/net/atm/pvc

Itf VPI VCI   AAL RX(PCR,Class) TX(PCR,Class)

  0   835 5 0 UBR 0 UBR   CLIP, Itf:atm0, Encap:None

  0   0 5 5 0 UBR 0 UBR

  0   016 5 0 UBR 0 UBR

 

/proc/net/atm/speedtch:1

Speed Touch USB  (usb-:00:1d.0-2)

MAC: 00:90:d0:4e:49:16

AAL5: tx 0 ( 0 err ), rx 0 ( 0 err, 0 drop )

Line up

 

/proc/net/atm/svc

Itf VPI VCI   State  Remote

N/[EMAIL PROTECTED]  LISTEN

999   0 0 CONNECTED

999   0 0 CONNECTED

 

/proc/net/atm/vc

Address Itf VPI VCI   Fam Flags Reply Send buffer Recv buffer  [refcnt]

cf59d800 UnassignedSVC 04d8  0   0/ 105472   0/ 105472 [2]

cf59dc00 999   0 0 SVC 0102  0   0/ 105472   0/ 105472 [2]

d6f54c00 999   0 0 SVC 0102  0   0/ 105472   0/ 105472 [2]

cf59d000   0   835 PVC 2043  0   0/ 105472   0/ 105472 [2]

d6f70800   0   0 5 PVC 0043  0   0/ 105472   0/ 105472 [2]

d6f70400   0   016 PVC 0043  0   0/ 105472   0/ 105472 [2]

 

 

 

While the ping was on /proc/net/atm/arp looked like this:

/proc/net/atm/arp

IPitf TypeEncp Idle IP address  ATM address

atm0  PVC NULL0 10.200.1.1  0.8.35

 

I did not find any difference in other files while the system was trying to 
ping.

 

Tommy

 

 


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

   



-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

 



From: [EMAIL PROTECTED] on behalf of Gilles Espinasse
Sent: Fri 9/7/2007 11:56 PM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway




Selon C A Tomy [EMAIL PROTECTED]:

 I tried both 'atmarp -s 10.200.1.1 8.35' and 'atmarp -s 10.200.1.1 8.35 null'
 . But  in either case, piniging my gateway is not sucessful.

 Tommy

Maybe you did not use routed IP.
Instead a configuration based on br2684 usage may be needed.

Gilles

Is it possible to make configuation based on br2684 that uses amarpd. If so how 
is it done? Some time back, I assumed my connection to be PPPoE and tried to 
configure my connection. But this is what I got :

localhost peers # br2684ctl -b -c 0 -a 8.35 

 sleep 5

br2684ctl[7028]: Interface nas0 created sucessfully

br2684ctl[7028]: Communicating over ATM 0.8.35, encapsulation: LLC

br2684ctl[7028]: Interface configured

localhost peers # ifconfig nas0 10.200.3.190 netmask 255.255.0.0 

 sleep 10 

localhost peers # route add default gw 10.200.1.1

localhost peers # pppd call speedtch

Plugin rp-pppoe.so loaded.

RP-PPPoE plugin version 3.3 compiled against pppd 2.4.4

Timeout waiting for PADO packets

Unable to complete PPPoE Discovery

localhost peers #

Tommy



Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

   



-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[Gilles Espinasse]

- Original Message - 
From: C A Tomy [EMAIL PROTECTED]
To: speedtouch@ml.free.fr
Sent: Thursday, September 06, 2007 2:23 AM
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway



 Hi Duncan,
 I know my ip adress (10.200.3.190) and ip of my gateway (10.200.1.1). What
I meant is that I have set the dns in /etc/resolv.conf

 Tommy

Have you tested to ping your gateway?
This allow to test only the connectivity without what may be a dns trouble.
Then test with 209.85.135.10 (that's resolve to google.com)

Gilles


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

 



From: [EMAIL PROTECTED] on behalf of Gilles Espinasse
Sent: Thu 9/6/2007 11:36 AM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway





- Original Message -
From: C A Tomy [EMAIL PROTECTED]
To: speedtouch@ml.free.fr
Sent: Thursday, September 06, 2007 2:23 AM
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway



 Hi Duncan,
 I know my ip adress (10.200.3.190) and ip of my gateway (10.200.1.1). What
I meant is that I have set the dns in /etc/resolv.conf

 Tommy

Have you tested to ping your gateway?
This allow to test only the connectivity without what may be a dns trouble.
Then test with 209.85.135.10 (that's resolve to google.com)

Gilles


I tested pinging my gate way. It does not ping at all. The response I get it:

#Ping 10.200.1.1

PING 10.200.1.1 (10.200.1.1) 56 (84) bytes of data

--- 10. 200.1.1 Ping statistics ---

125 packets trasmitted, 0 received, 100% packet loss time 124030ms

By the way, how do start my speedtouch adsl, after configuring atm0. Is there 
something like pppd call speedtch that would initiate the modem.

Tommy

 

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

   



-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[Duncan Sands]

Hi Tommy,

 I tested pinging my gate way. It does not ping at all. The response I get it:
 
 #Ping 10.200.1.1
 
 PING 10.200.1.1 (10.200.1.1) 56 (84) bytes of data
 
 --- 10. 200.1.1 Ping statistics ---
 
 125 packets trasmitted, 0 received, 100% packet loss time 124030ms
 
 By the way, how do start my speedtouch adsl, after configuring atm0. Is there 
 something like pppd call speedtch that would initiate the modem.

it should be possible to send packets after the
atmarp -s $REM_IP $VPI.$VCI $ENCAPS
command.

Please send the contents of all the files in /proc/net/atm
You should copy the files after running the commands I
sent you before for configuring your connection.

Ciao,

Duncan.

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

 



From: [EMAIL PROTECTED] on behalf of Duncan Sands
Sent: Thu 9/6/2007 2:30 PM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway




Hi Tommy,

 I tested pinging my gate way. It does not ping at all. The response I get it:

 #Ping 10.200.1.1

 PING 10.200.1.1 (10.200.1.1) 56 (84) bytes of data

 --- 10. 200.1.1 Ping statistics ---

 125 packets trasmitted, 0 received, 100% packet loss time 124030ms

 By the way, how do start my speedtouch adsl, after configuring atm0. Is there 
 something like pppd call speedtch that would initiate the modem.

it should be possible to send packets after the
atmarp -s $REM_IP $VPI.$VCI $ENCAPS
command.

Please send the contents of all the files in /proc/net/atm
You should copy the files after running the commands I
sent you before for configuring your connection.

Ciao,

Duncan.


Hi Ducan,

I am attaching here the contents of /proc/net/atm

arp, br2684, devices, lec, mpc, speedtch:1, svc, vc, pvc

The commands that I gave to configure atm0 are:

[EMAIL PROTECTED] ~ $ su
Password: 
localhost tomy # atmsigd -b
localhost tomy # ilmid -b

localhost tomy # echo starting amarpd Server:
starting amarpd Server:
localhost tomy # atmarpd -b -l syslog
localhost tomy # atmarp -c atm0
localhost tomy # ifconfig atm0 10.200.3.190 netmask 255.255.0.0 mtu 1500 up
localhost tomy # atmarp -s 10.200.1.1 8.35 null
atmarp: Address already in use
localhost tomy # route add default gw 10.200.1.1 
localhost tomy #

Where am I going wrong?

Tommy

 


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

   



-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[Duncan Sands]

Hi Tommy,

 localhost tomy # atmarp -s 10.200.1.1 8.35 null
 atmarp: Address already in use

this Address already in use is not good.  Is this
the second time you did this?

D.

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[Duncan Sands]

 I am attaching here the contents of /proc/net/atm

Unfortunately the list strips off attachments so I didn't
get them.  Please include them inline.

Thanks,

Duncan.

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

 



From: [EMAIL PROTECTED] on behalf of Duncan Sands
Sent: Thu 9/6/2007 5:26 PM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway




 I am attaching here the contents of /proc/net/atm

Unfortunately the list strips off attachments so I didn't
get them.  Please include them inline.

Thanks,

Duncan.

Hi Duncan,

Here is the contents of  my /proc/net/atm/

/proc/net/atm/adummy:0
version 1.0

/proc/net/atm/arp
IPitf TypeEncp Idle IP address  ATM address
atm0  PVC NULL  309 10.200.1.1  0.8.35

'/proc/net/atm/br2684'is empty

/proc/net/atm/devices
Itf TypeESI/MACaddr AAL(TX,err,RX,err,drop) ... [refcnt]
  0 adummy    0 ( 0 0 0 0 0 )  5 ( 1294 0 0 0 0 )   [4]
  1 speedtch0090d04e4916  0 ( 0 0 0 0 0 )  5 ( 0 0 0 0 0 )  [1]

/proc/net/atm/lec
Itf  MAC  ATM destination StatusFlags VPI/VCI 
Recv VPI/VCI

/proc/net/atm/mpc
QoS entries for shortcuts:
IP address
  TX:max_pcr pcr min_pcr max_cdv max_sdu
  RX:max_pcr pcr min_pcr max_cdv max_sdu

/proc/net/atm/pvc

Itf VPI VCI   AAL RX(PCR,Class) TX(PCR,Class)
  0   835 5 0 UBR 0 UBR   CLIP, Itf:atm0, Encap:None
  0   0 5 5 0 UBR 0 UBR
  0   016 5 0 UBR 0 UBR

/proc/net/atm/speedtch:1
Speed Touch USB  (usb-:00:1d.0-2)
MAC: 00:90:d0:4e:49:16
AAL5: tx 0 ( 0 err ), rx 0 ( 0 err, 0 drop )
Line up

/proc/net/atm/svc
Itf VPI VCI   State  Remote
N/[EMAIL PROTECTED]  LISTEN
999   0 0 CONNECTED
999   0 0 CONNECTED

/proc/net/atm/vc
Address Itf VPI VCI   Fam Flags Reply Send buffer Recv buffer  [refcnt]
d665c800 UnassignedSVC 04d8  0   0/ 105472   0/ 105472 [2]
d665cc00 999   0 0 SVC 0102  0   0/ 105472   0/ 105472 [2]
d6f4c400 999   0 0 SVC 0102  0   0/ 105472   0/ 105472 [2]
d66bd800   0   835 PVC 2043  0   0/ 105472   0/ 105472 [2]
d68c8c00   0   0 5 PVC 0043  0   0/ 105472   0/ 105472 [2]
d6878800   0   016 PVC 0043  0   0/ 105472   0/ 105472 [2]



Tommy





Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

   



-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

Hi Duncan,
Thanks a lot for the quick reply. I did every thing that you suggested. Still I 
am not be acess  internet. I emerged linux-atm. Then I started atmarpd. But I 
could not. So I first started atmsigd and ilmid and then started atmrpd. This 
time it started without any problem. I created atm0 and configured it as you 
have suggested but nothing happens. I tried to ping my gateway. The result is 
as follows:
#ping 10.200.1.1
PING 10.200.1.1 (10.200.1.1) 56 (84) bytes of data
 
 10.200.1.1 ping statics ---
125 packets transmitted, 0 received, 100% packet loss time 124030 ms
 
 
For me VPI = 8, and VCI = 35 and netmask is 255.255.0.0. the IPs of the 
nameservers are given in /etc/resolv.conf. What else do I need to do?
 
Tommy
  



From: [EMAIL PROTECTED] on behalf of Duncan Sands
Sent: Sat 9/1/2007 5:48 PM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway




Hi Tommy,

 For several days I have been trying to configure my speedtouch usb modem on 
 my gentoo box.
 I tried the documentation for gentoo  at 
 http://www.linux-usb.org/SpeedTouch/gentoo/index.html
 But I have not been sucessful. I am connected to a LAN with a static ip 
 address, netmask gateway
 and dns. I do not have a password or a username. I am not sure whther I need 
 to take the connection
 as PPPoA or PPPoE. My connection through a USB port. So I assume that it is 
 PPPoA.
 The properties of the workibng connection in my window partition is as 
 follows:
 
 Connection
 VPI 8
 VCI 35
 Type: RFC 1483B
 Encapsulation: LLC
 FCS: Automatic
 
 ADSL type: POTS
 Adsl Mode: Gdmt.A

try the following procedure.  This assumes your ISP is using routed ip.  It
doesn't use ppp/pppd at all, however you will need to have atmarp and atmarpd
installed (from the atm-tools package, dunno what gentoo calls it).  You will
need to do this as root.

VPI=8
VCI=35 # are you sure it's 35?  36 is more usual
LOC_IP=AA.BB.CC.DD # put your static ip address here
REM_IP=EE.FF.GG.HH # put your gateway's ip address here
ENCAPS=null
echo Starting atmarpd server: 
atmarpd -b -l syslog # you don't need to do this if your system starts atmarpd 
automatically
atmarp -c atm0
ifconfig atm0 $LOC_IP netmask 255.255.255.0 mtu 1500 up
atmarp -s $REM_IP $VPI.$VCI $ENCAPS
route add default gw $REM_IP

 Please tell me how I have to go about setting up my connection.

Good luck!

Duncan.

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

   



-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[Duncan Sands]

Hi Tommy,

 For me VPI = 8, and VCI = 35 and netmask is 255.255.0.0. the IPs of the 
 nameservers are given in /etc/resolv.conf. What else do I need to do?

I'm not sure why you mention the IP of your nameservers - this is not the
same as the gateway IP.  So... do you know your IP address and the IP
of your gateway (which may well be similar to your IP address, only
with the last digits changed).

Ciao,

Duncan.

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[C A Tomy]

Hi Duncan,
I know my ip adress (10.200.3.190) and ip of my gateway (10.200.1.1). What I 
meant is that I have set the dns in /etc/resolv.conf
 
Tommy
  



From: [EMAIL PROTECTED] on behalf of Duncan Sands
Sent: Wed 9/5/2007 11:53 PM
To: speedtouch@ml.free.fr
Subject: [speedtouch] Re: Speedtouch and LAN with static IP and Gateway




Hi Tommy,

 For me VPI = 8, and VCI = 35 and netmask is 255.255.0.0. the IPs of the 
 nameservers are given in /etc/resolv.conf. What else do I need to do?

I'm not sure why you mention the IP of your nameservers - this is not the
same as the gateway IP.  So... do you know your IP address and the IP
of your gateway (which may well be similar to your IP address, only
with the last digits changed).

Ciao,

Duncan.

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

   



-- Binary/unsupported file stripped by Listar --
-- Type: application/ms-tnef
-- File: winmail.dat


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

[speedtouch] Re: Speedtouch and LAN with static IP and Gateway

[Duncan Sands]

Hi Tommy,

 For several days I have been trying to configure my speedtouch usb modem on 
 my gentoo box.
 I tried the documentation for gentoo  at 
 http://www.linux-usb.org/SpeedTouch/gentoo/index.html
 But I have not been sucessful. I am connected to a LAN with a static ip 
 address, netmask gateway
 and dns. I do not have a password or a username. I am not sure whther I need 
 to take the connection
 as PPPoA or PPPoE. My connection through a USB port. So I assume that it is 
 PPPoA. 
 The properties of the workibng connection in my window partition is as 
 follows:
  
 Connection
 VPI 8
 VCI 35
 Type: RFC 1483B
 Encapsulation: LLC
 FCS: Automatic
  
 ADSL type: POTS
 Adsl Mode: Gdmt.A

try the following procedure.  This assumes your ISP is using routed ip.  It
doesn't use ppp/pppd at all, however you will need to have atmarp and atmarpd
installed (from the atm-tools package, dunno what gentoo calls it).  You will
need to do this as root.

VPI=8
VCI=35 # are you sure it's 35?  36 is more usual
LOC_IP=AA.BB.CC.DD # put your static ip address here
REM_IP=EE.FF.GG.HH # put your gateway's ip address here
ENCAPS=null
echo Starting atmarpd server: 
atmarpd -b -l syslog # you don't need to do this if your system starts atmarpd 
automatically
atmarp -c atm0
ifconfig atm0 $LOC_IP netmask 255.255.255.0 mtu 1500 up
atmarp -s $REM_IP $VPI.$VCI $ENCAPS
route add default gw $REM_IP

 Please tell me how I have to go about setting up my connection.

Good luck!

Duncan.

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]