Re: [SunRay-Users] Sun Ray DTU through Internet or different subnet

Hi, I have a Sun Ray Server on the subnet 192.168.1.0 / 255.255.255.0, and I need to use a Sun Ray DTU on a different subnet 192.168.4.0 / 255.255.255.0 with a different DHCP server of the SRS, or at home through internet. What do I need to configure on the Sun Ray Server for that? Sun

[SunRay-Users] utresadm usage question

Hello SunRay-Users, Does anybody use utresadm regularly? My junior admin asked that when he plugged a Sun Ray DTU to another monitor with different capabilities (i.e. Max HZ at the same resolution), he tried to use utresadm to assign a different default resolution to the DTU. It seems that

RE: [SunRay-Users] Type 7 keyboard on SR1 broken after Solaris upgrade from 10U2X86 to 10U4

Dominik, Have you tried a type 6 keyboard or a standard (non swiss german) keyboard. You might want to open a case with Sun, in case its a known bug. Good Luck DaveP -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dominik Frey Sent: Friday, February 08,

Re[2]: [SunRay-Users] utresadm usage question

Hello William, True. Finally got to our DTUs and checked myself. I guess the youngster's hands are "curly"... Running utresadm and killing the session (via CtrlAltBackspace) does indeed change the video frequency (85 to 60 and back again). Also checked: pulling the plug on the DTU does

Re: [SunRay-Users] Pop up VPN GUI

Hi Bob, I can't say anything specific to your hardware but we Cisco PIX515 and we had to lower the encryption value to the AES default which was, I believe, LESS than 256 bits, maybe 128 or 64 bits. Not sure if that will help but we only arrived at this by trial and error. Regards, Jim

Re: [SunRay-Users] Pop up VPN GUI

You picked the one EZ-VPN Server that I think we are having problems with... :( This was brought up internally here at Sun a little while back. I'll check and see if there are any updates.[ Bob Prendergast wrote: Hello all, I have a follow-up question regarding the VPN GUI firmware. I

[SunRay-Users] Pop up VPN GUI

Hello all, I have a follow-up question regarding the VPN GUI firmware. I have a Cisco 851 running the EZ-VPN Server. I am able to establish a connection using the Cisco Soft-client, but when I attempt to make a connection with the Sunray VPN firmware, it hangs on 28H - Phase 2 quick I msg1. Is

Re: [SunRay-Users] utresadm usage question

Jim, You should be able to use the utsession command to identify and terminate only a specific session (which should then automatically restart with the correct resolution). See the man pages on specific options. William Yang - Original Message - From: Jim Klimov To:

[SunRay-Users] Type 7 keyboard on SR1 broken after Solaris upgrade from 10U2 X86 to 10U4

Crosspost from forum.java.com: Hi everbody! I was running SRSS 4.0 with 127553-01 on Solaris 10U2 X86. Attached are some Sunray1 with type 7 keyboard (swiss german). Everything was running fine until I upgraded the server to Solaris 10 Update 4 using the Solaris upgrade function. Since then,

Re: [SunRay-Users] Pop up VPN GUI

What's an 851? I've never heard of it. We *have* had problems with the *831* being used as a gateway. As far as I'm aware, we never suggested that an EzVPN *client* device could be used as a gateway. Kent Craig Bender wrote: You picked the one EZ-VPN Server that I think we are having problems

Re: [SunRay-Users] Pop up VPN GUI

Jim Curran wrote: Hi Bob, I can't say anything specific to your hardware but we Cisco PIX515 and we had to lower the encryption value to the AES default which was, I believe, LESS than 256 bits, maybe 128 or 64 bits. Not sure if that will help but we only arrived at this by trial and