In a message dated 01/17/2004 12:16:34 AM Eastern Standard Time,
[EMAIL PROTECTED] writes:
was it red devil lye?
Yes it was Red Devil lye that I used. Is that a problem?
Rick M
Brownstown, Mi.
[Non-text portions of this message have been removed]
Biofuel at Journey to Forever:
I just filled up last night and paid $1.45 for a U.S. gallon in Flatrock,
Michigan. Marathon fuel stop.
Rick M
Brownstown, Mi.
[Non-text portions of this message have been removed]
Biofuel at Journey to Forever:
http://journeytoforever.org/biofuel.html
Biofuels list archives:
In a message dated 01/17/2004 4:25:04 AM Eastern Standard Time,
[EMAIL PROTECTED] writes:
Well I made my first blender batch of Biodiesel last night. I am proud to
say that I made a great batch of GLOP
I am not sure what I did wrong. I think maybe the Lye and Methanol did not
get mixed
Hi again,
Well it took 4 trys but I think I got it this time. It has been blended for
about 3 hrs so far and I have seperation at the bottom. I have it in a glass
jar that just holds my 1 liter plus Methonal and it has about 1/2 inch on the
bottom that is different than the rest so far.
I
Hi,
I have a question in regards to mixing the Methanol and Lye. I am just doing
small test batches. I was wondering how far in advance can you mix it. Can
it be made ahead of time or does it have to be made and used right away. I am
mixing it in a sealed container and I don't open it
Hi,
A little while back there was talk about 70% Isopropyl Alcohol verses 95%. I
didn't see the answer as to if the 70% would work or not. I haven't been
able to find anything more than the 70% in Rubbing alcohol. I want to do a
Titration and need to know if it will work or not.
Thanks
Keith,
instead of using bubbles on the washing can you circulate the water from the
bottom of the wash tank up into like a sprinkler head and let it spray or drip
back down on top of the biofuel? Not a lot of pressure just flow.
Rick M
[Non-text portions of this message have been removed]
Cool Deal,
That all makes sense to me. I will use the bubble washing process. I have
made what I think is 3 one litre batches of biodiesel. 2 from new oil and 1
from used oil. All 3 have seperated very clearly. I am going to try to wash
the 3 and see what happens.
Thanks
Rick M
Hi Todd
I am also a newbie to the Biodiesel. I am washing my first little bit of
fuel as I write this post. In reading your post I assume that the biodiesel
will
not work in a kerosene lamp. That is what I was going to try after I got it
washed. I kinda figured it wouldn't but I was
In a message dated 01/30/2004 11:43:53 AM Eastern Standard Time,
[EMAIL PROTECTED] writes:
Rick,
I was told several months ago on this group that biodiesel will work in
a petromax lantern. If you have one, you might try it.
-BRAH
What is a petromax lantern? I only have the old antique
Hi all,
Got my first washed batch done. (I think) The ph level is about 5.4 I don't
think that is right. What do I do? It looks great a nice golden brown kinda
like honey. Very clear. I think it looks good. But then it is my first
batch. What is the thoughts of the list?
Rick M
In a message dated 02/03/2004 9:46:26 AM Eastern Standard Time,
[EMAIL PROTECTED] writes:
Hi Rick
Hi all,
Got my first washed batch done. (I think) The ph level is about 5.4 I don't
think that is right.
What did you measure the pH of, the biodiesel or the final
wash-water?
I measured the
Hi all,
I want to thank all of those that have responded to my cry for help in making
my first Biodiesel. I am now in the process of making a processor for larger
batches to see if I can make it on a larger scale. I am very excited about
doing this. I want to power my Diesel gen set for my
In a message dated 02/16/2004 11:47:33 AM Eastern Standard Time,
[EMAIL PROTECTED] writes:
Burning glycerine
If I understand this correctly, I can take the by product from the biodiesel.
That nasty looking stuff from the bottom of the processor and burn it in my
waste oil burner with no
In a message dated 02/16/2004 2:18:55 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
It should work. EPA-approved waste crankcase oil heaters burn at high
temps. Does it have a pre-heater and a pumped injection system that
vaporises the fuel?
Yes it does. I burns all types of oil. I
In a message dated 02/16/2004 4:17:18 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
It'll be a lot easier if you use KOH, potassium hydroxide, instead of
NaOH, sodium hydroxide. With KOH the by-product won't solidify, makes
it a lot easier to work with. We run it through a 1/8 valve
Hi again,
Another dumb question. Is this heating a needed step and if it is how long
should it be heated for?
There's no need to heat the finished fuel to this high of a temp to dry it.
Approximately 120*F (~46*C) is more than sufficient to get any microscopic
water to settle out before
In a message dated 02/24/2004 8:07:30 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
Rick:
washer. I wash it with 1/2
the amount of water for 6 to 7 hours and let it sit
over night and repeat this
3 times. My last wash water is just about clear and
the ph is about 6.
No need
I don't know about Soydiesel but my biodiesel from WVO cost about $.60 per
gal to make. Not counting my time.
Rick M
Brownstown, Mi
The Cost of BioFuel:
Can anyone tell me what is the cost per gallon of homemade Biofuel?
I understand that it would vary depending on the process but I am new to
Hi Keith,
I want to set up a pump system like you have been talking about. Right now I
am using the stir method. My tank in not completely sealed and I am slowly
pouring the Methoxide (sp) in as it mixes then putting the lid back on while it
stirs. I am making about 10 gal of finished
I just bought a drum of Methanol from my local oil dealer. I paid $126.50
plus $25.00 drum deposit. That probabaly won't help you because I am in
Michigan but you should be able to find it cheaper than $300.00
Rick M
Brownstown, Mi
My quote for the Methanol price yesterday was wrong. A 55
Hi again,
I have a question. Can you over bubble your bubble wash? Can your bubbles
be to big? How long should you wash say a 15 gallon wash? I have made my own
air stone. I used a piece of 1/2 nylon tubing and made a circle with a tee
fitting. Then I drilled a few tiny holes in it with
Hi all,
I was just wondering if my yields of Bio Diesel is normal or below. I just
made a 48 Liter batch of Bio. After it settled out and I drained off the
settling I ended up with about 41 liters of fuel before washing. Does that
sound
about right for a batch of that size? My oil
In a message dated 03/25/2004 11:37:36 AM Eastern Standard Time,
[EMAIL PROTECTED] writes:
My oil titrated at 5.6 grams
per liter.
That was the titration result? - ie, you used 5.6 grams plus the
basic amount (3.5) = 9.1 grams NaOH per litre?
I mixed 40 liters of oil to 8 liters of Methanol.
In a message dated 04/08/2004 3:23:44 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
mix 3.75 liters of methanol to the appropriate amount of sodium hydroxide in
a 5 gallon carboy (with small hole drilled in cap) and let mix for 15 minutes.
My problem is that the sodium hydroxide fails
I need help again,
I did another 40 liter batch of bio yesterday. I did a test batch first and
it came out right with my seperation at the bottom and the bio on the top just
like it is suppose to. The only thing a little different from any other
batches is that it was a little darker in
Hi Todd,
I also had a batch do this. Am I correct in assuming that if the amounts of
alcohol and lye are correct, that the problem lays in not enough mixing time?
Or would something else cause it?
Rick M
Brownstown, Mi.
The volume of glycerin cocktail that settled out should give you an
Greetings list,
I have a question. If you do a test batch and you get a glob of what looks
like hard grease or bad looking soap, wouldn't that mean that you probably
used to much lye?
Rick M
Brownstown, Mi.
[Non-text portions of this message have been removed]
I just did another test batch and there is something wrong. I am doing
small test batches trying to make sure my measurements are correct. I have
done
5 small batches and have had the same results with all. I don't understand
what is wrong as I have made about 50 gallons of fuel that
In a message dated 06/04/2004 11:27:39 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Rick,
Go to your kitchen and take some of the vegetable oil from your pantry and
run a sample. Do everything the same as you did with the WVO.
If the same thing happens you know it's not your oil
Hi,
Is there any backyard Biodiesel makers in the Michigan area that can help
me. I am having a problem that I just can't get figured out. I would like to
talk or meet with you to see if you can tell me what I am doing wrong. I
have made some fuel and had no problems doing it and all
Hi all,
I have been following this list for a while know and am very interested in
making Biodiesel for my own use. I am building a retirement home in northern
Michigan that is a totally off grid. We have solar and wind power for our
electric. I have installed a solar wall for some of my
I have some gas line anti- freeze that is Isopropyl but it doesn't say the %
on it. It does have this on it. Does any one know what it means?
Isopropyl Alcohol (CAS #67-63-0)
I am also looking for the 95 to 99%
Thanks
Rick M
Brownstown, Mi.
[Non-text portions of this message have been
Hi again,
I am a newbie to the Biodiesel and am about to try my first attempt to make
some. I have new oil and about 10 gal of WVO. I am going to try some blender
batches of the new oil first and then try my hand at the WVO.
I was wondering if anyone in the Michigan area was doing any of
Hi Johnny,
I am just getting started. I made my first blender batch last night. I made
a perfect batch of GLOP. I am using new oil right now untill I figure it
out. I don't think my Lye and Methanol mixed right.
I got 5 gal of Methanol from the internet. It was expensive but I just
Well I made my first blender batch of Biodiesel last night. I am proud to
say that I made a great batch of GLOP
I am not sure what I did wrong. I think maybe the Lye and Methanol did not
get mixed good enough. I used 1 liter of new oil, 200 ml of Methanol, and 3.5
grams of lye. What
36 matches
Mail list logo