2013/8/7 Christian Gmeiner christian.gmei...@gmail.com:
Without this change EDID_DETAILED_TIMING_VSYNC_OFFSET
and EDID_DETAILED_TIMING_VSYNC_PULSE_WIDTH macros can
not be used (compile error).
The fix is quite trivial: rename struct member to the
expected name.
Signed-off-by: Christian
Hi Tom,
please pull these two patches to your tree.
Both patches targets Zynq fpga code.
Thanks,
Michal
The following changes since commit a78dac79ede7fbb4c9e816abc879655540c3f076:
nds32: fix the missing COBJS-y change (2013-08-09 01:51:24 +0800)
are available in the git repository at:
Hi, experts:
DFU tool is for updating U-boot firmware.
So, Android fast boot protocol also includes this functionality.
So, when to use DFU tool?
(User usually uses android fast boot functionality to update U-boot
firmware)
Best wishes,
___
Hi Albert,
please pull these 3 zynq patches to your arm tree.
There is still pending the arm: lds: Remove libgcc eabi exception handling
tables
patch. Have you considered to also add it?
Thanks.
Michal
The following changes since commit c85c7faf476a3f77389f71d898ced6a326a8c691:
nds32: fix
Hi Albert,
please pull these 3 zynq patches to your arm tree.
There is still pending the arm: lds: Remove libgcc eabi exception handling
tables
patch. Have you considered to also add it?
v2:
- Changed email address,
- There was incorrect rebase which I have fixed - correct sha1 now
Thanks.
Hi Sascha,
Thanks for testing master-test branch.
On 11-08-2013 20:20, Sascha Silbe wrote:
Hello Jagan,
Jagan Teki jagannadh.t...@gmail.com writes:
Please find the test branch for this patch series, here.
http://git.denx.de/?p=u-boot/u-boot-spi.git;a=shortlog;h=refs/heads/master-test
On 11/08/13 19:34, Tom Rini wrote:
On Sun, Aug 11, 2013 at 09:31:00AM +0100, Mark Jackson wrote:
On 22/04/13 13:46, Mark Jackson wrote:
NanoBone Specification:
---
CPU:
TI AM335x
Memory:
256MB DDR3
64MB NOR flash
256MB NAND flash
128KB FRAM
Ethernet:
On 08/11/13 20:04, Marek Vasut wrote:
+/* You can initialize platform's USB host, device or both
+ * capabilities by passing this enum as an argument to
+ * board_usb_init().
+ */
The comment style is wrong, please fix. Did the patchset pass checkpatch ?
/*
* multi
* line
* comment
Hi all,
since no one commented on my prior mail, i just took the liberty to write
a little patch that chooses regs 0-5 if none are specified for 'mii dump'.
Also fixes some alignment issues, typos and introduces the 'Selector
Field' to the register description of PHY regs 4 and 5. On top, 'mii
Hi, experts:
I found XCOBJS/XCOBJS-y syntax in common/Makefile.
So why not use COBJS syntax?
Is there some tricky concept?
Best wishes,
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hey all,
As the merge window closed this past weekend, I would like to encourage
all Custodians to get pull requests together of what's out there now,
and clean and ready to go. I would like to tag -rc1 on the 19th, then
another rc every other Monday, releasing on the 14th of October as
Hi Wolfgang Denk,
On 8/11/2013 10:50 PM, Wolfgang Denk wrote:
Dear Bo Shen,
In message 1376230503-25331-1-git-send-email-voice.s...@gmail.com you wrote:
when CONFIG_ENV_IS_NOWHERE is enabled, it is still need to define
CONFIG_ENV_SIZE. So, add a default size (1024 Bytes) to avoid
compile
Dear Bo Shen,
In message 5208de04.1000...@gmail.com you wrote:
At first glance of CONFIG_ENV_IS_NOWHERE, I think no need to define the
CONFIG_ENV_SIZE, actually, it needs to define the CONFIG_ENV_SIZE. So, I
think add a default value will be better (Maybe another choice to add a
On Sun, Aug 11, 2013 at 02:15:03PM +, Bo Shen wrote:
when CONFIG_ENV_IS_NOWHERE is enabled, it is still need to define
CONFIG_ENV_SIZE. So, add a default size (1024 Bytes) to avoid
compile error if not define CONFIG_ENV_SIZE
The problem is that ENV_SIZE is also a limiting factor on how
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit fdce7b633a1de24456226b18527cc7900c34282a:
gpio: omap5-uevm: Configure the tca6424 gpio expander (2013-07-30
09:21:42 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git
On Sat, Aug 10, 2013 at 03:50:45PM -0500, Dennis Gilmore wrote:
On Thu, 8 Aug 2013 11:26:37 -0400
Tom Rini tr...@ti.com wrote:
On Wed, Aug 07, 2013 at 06:04:23PM -0500, Dennis Gilmore wrote:
On Wed, 7 Aug 2013 09:19:21 -0400
Tom Rini tr...@ti.com wrote:
On Tue, Aug 06, 2013 at
On Sat, Aug 10, 2013 at 04:07:08PM -0500, Dennis Gilmore wrote:
On Fri, 09 Aug 2013 22:35:08 -0600
Stephen Warren swar...@wwwdotorg.org wrote:
On 08/09/2013 05:00 PM, Stephen Warren wrote:
On 08/09/2013 04:49 PM, Wolfgang Denk wrote:
Dear Stephen Warren,
In message
On Wed, Jul 31, 2013 at 08:20:30AM +0200, Heiko Schocher wrote:
Hello Mugunthan,
Am 30.07.2013 10:40, schrieb Mugunthan V N:
On 7/30/2013 1:23 PM, Heiko Schocher wrote:
Signed-off-by: Heiko Schocherh...@denx.de
---
- changes for v2:
defined all bits used in the gmii_sel register as
Hi Mateusz,
When user attempted to perform a raw write using DFU (vide
dfu_fill_entity_mmc) with MMC interface not initialized before,
get_mmc_blk_size() reported invalid (zero) block size - it wasn't
possible to write ie. a new u-boot image.
This commit fixes that by initializing device
Use previously unused return value of function vrec_header
to return a padding size to generic mkimage. This padding
size is used in copy_files to pad with zeros after copying
the data image.
Signed-off-by: Stefano Babic sba...@denx.de
---
Changes in v2: None
tools/mkimage.c | 24
Add functions to report the HAB (High Assurance Boot) status
of e.g. i.MX6 CPUs.
This is taken from
git://git.freescale.com/imx/uboot-imx.git branch imx_v2009.08_3.0.35_4.0.0
cpu/arm_cortexa8/mx6/generic.c
include/asm-arm/arch-mx6/mx6_secure.h
Signed-off-by: Stefano Babic sba...@denx.de
---
Implement function vrec_header to be able to pad the final
data image file according the what has been calculated for
boot_data.length.
Signed-off-by: Stefano Babic sba...@denx.de
---
Changes in v2: None
tools/imximage.c | 82 --
1 file
Add support for setting the CSF (Command Sequence File) pointer
which is used for HAB (High Assurance Boot) in the imximage by
adding e.g.
CSF 0x2000
in the imximage.cfg file.
This will set the CSF pointer accordingly just after the padded
data image area. The boot_data.length is adjusted with
(header for Freescale's i.MX processors) to allow the usage of
Freescale's tools to sign the u-boot image and provide a secure boot.
This has nothing to do with the Secure Boot extensions implemented by
Simon Glass, that can be in any case used to boot later a secure image.
Freescale's secure
Hi Wolfgang,
On Mon, 12 Aug 2013 07:53:15 +0200, Wolfgang Denk w...@denx.de wrote:
Dear Jeroen Hofstee,
In message 1376254719-15594-4-git-send-email-jer...@myspectrum.nl you wrote:
To be more EABI compliant and as a preparation for building
with clang, use the platform-specific r9
This patch adds a dump phy driver for the KSZ8895 switch from
Micrel. As the SoC MAC is directly connected to switch no
autonegotiation is needed as the link is always up.
Signed-off-by: Christian Gmeiner christian.gmei...@gmail.com
---
drivers/net/phy/micrel.c | 31
Doing a make distclean; make mx6qsabresd_config; make
and hexdump -C u-boot.imx | less
...
0360 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ||
*
03f0 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 ||
This better reflects the naming from the Reference Manual
as well as fits better since flash is not really applicabe
for SATA.
Signed-off-by: Stefano Babic sba...@denx.de
---
Changes in v2: None
tools/imximage.c | 17 +
1 file changed, 9 insertions(+), 8 deletions(-)
diff
Change to dynamically allocate the imx_header to correctly
allocate the IVT, Boot Data and DCD at correct locations
depending on the boot media.
Also check that the Image Vector Table Offset + IVT +
Boot Data + DCD = Initial Load Region Size.
Previously struct imx_header was always 4096 bytes
On Mon, Aug 12, 2013 at 11:39 AM, Stefano Babic sba...@denx.de wrote:
...
The patchset allows to add to the imx Header the CSF (command Sequence File)
generated by the tools provided by Freescale. The CSF is then simply
concatenated
to the u-boot image, making a signed bootloader, that the
Dear Albert,
In message 20130812164406.5a6807e7@lilith you wrote:
IIRC, r9 is used as GOT pointer ?
No, it is not, well, not any more since GOT-based relocation was
replaced by ELF relocation, which requires no reserved register.
In any case, please also update the README section of
On 08/11/2013 12:08 PM, Marek Vasut wrote:
Dear Jim Lin,
TFTP booting is slow when a USB keyboard is installed and
stdin has usbkbd added.
This fix is to change Ctrl-C polling for USB keyboard to every second
when NET transfer is running.
diff --git a/include/usb.h b/include/usb.h
On Sat, Aug 10, 2013 at 05:56:13PM +0530, Jagannadha Sutradharudu Teki wrote:
Hi Tom,
Pull request has more likely a cleanup and one bug fixe.
Please let me know for any issues/concerns.
Thanks,
Jagan.
The following changes since commit d05bfd0586ccebe96e31976459c8ef45ec65e109:
On Mon, Aug 12, 2013 at 08:59:01AM +0200, Michal Simek wrote:
Hi Tom,
please pull these two patches to your tree.
Both patches targets Zynq fpga code.
Thanks,
Michal
The following changes since commit a78dac79ede7fbb4c9e816abc879655540c3f076:
nds32: fix the missing COBJS-y
On Sat, Aug 10, 2013 at 09:21:10AM -0400, Jerry Van Baren wrote:
Note: This is the license header change from Roger Meier (thanks),
acked by Wolfgang. While this will diverge our source a bit from
the dtc upstream, I'm willing to live with that for now and
indefinitely if necessary.
I
Hi Jerry,
On Sat, Aug 10, 2013 at 7:21 AM, Jerry Van Baren gvb.ub...@gmail.comwrote:
Note: This is the license header change from Roger Meier (thanks), acked
by Wolfgang. While this will diverge our source a bit from the dtc
upstream, I'm willing to live with that for now and indefinitely if
2013/7/1 Vipin Kumar vipin.ku...@st.com:
On 7/1/2013 11:02 AM, Axel Lin wrote:
The questions raised here are valid and it forced me to re-read the
datasheet. For your convenience, I must tell you that the device is
actually
pl061 from ARM, so the driver can also be named so.
The datasheet
Hi
On Mon, Aug 12, 2013 at 6:57 PM, Axel Lin axel@ingics.com wrote:
2013/7/1 Vipin Kumar vipin.ku...@st.com:
On 7/1/2013 11:02 AM, Axel Lin wrote:
The questions raised here are valid and it forced me to re-read the
datasheet. For your convenience, I must tell you that the device is
On 08/12/2013 12:35 PM, Simon Glass wrote:
Hi Jerry,
On Sat, Aug 10, 2013 at 7:21 AM, Jerry Van Baren gvb.ub...@gmail.com
mailto:gvb.ub...@gmail.com wrote:
[snip]
I also discovered the u-boot libfdt/fdt_wip.c has fdt_find_regions()
from Simon that isn't in the upstream dtc version.
On Monday 12 August 2013 07:52 PM, Tom Rini wrote:
+#define GMII2_SEL_MII 0x0
+#define GMII2_SEL_RMII0x4
+#define GMII2_SEL_RGMII 0x8
+#define GMII2_SEL_NOTUSED 0xc
NOTUSED not needed as it is not supposed to be used.
same here ...
I
Dear Tom,
The following changes since commit 0daa1f698593fface63eacae7897fabe42cfd28e:
Merge branch 'fpga' of git://www.denx.de/git/u-boot-microblaze (2013-08-12
08:54:32 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mpc5xxx master
for you to fetch changes up
On Mon, Aug 12, 2013 at 09:14:19PM +0200, Wolfgang Denk wrote:
Dear Tom,
The following changes since commit 0daa1f698593fface63eacae7897fabe42cfd28e:
Merge branch 'fpga' of git://www.denx.de/git/u-boot-microblaze (2013-08-12
08:54:32 -0400)
are available in the git repository at:
Hi,
On Tue, 30 Jul 2013 23:37:57 +0200
Marek Vasut ma...@denx.de wrote:
This patch moves all the font configuration values into video_font_data.h
so they are all in the right place with the font. The video_font.h now only
includes video_font_data.h and will allow us to select and include
On Tue, 30 Jul 2013 23:37:58 +0200
Marek Vasut ma...@denx.de wrote:
This font is based on Linux drivers/video/console/font_mini_4x6.c as of
commit:
commit bcfbeecea11c15e243f076d37d637c2598aff4fe
Author: Bjarni Ingi Gislason bjarn...@rhi.hi.is
Date: Sun Aug 12 15:05:10 2012 +
On Mon, 05 Aug 2013 13:34:32 +0900
Donghwa Lee dh09@samsung.com wrote:
This patch have changed mipi dsi write functions' parameters correctly
so that type cast operations were removed. And mipi dsi payload is
composed with array of panel commands to improve readability.
Signed-off-by:
This commit brings removal of duplicated code for UART IP block embedded
at Samsung SoCs.
New include/asm/samsung-common directory has been created to store
common code for existing and future Samsung targets.
Moreover building of UART code now depends on more verbose CONFIG_S5P_SERIAL.
Thereof
This series of commits attempts to clean-up the Exynos3/4 code. Common code
for Exynos3 (S5PV210) and Exynos4 has been extracted.
Moreover it will facilitate support for older Samsung targets - like venerable
s3c6410 (arm1176) SoC.
Lukasz Majewski (3):
arm:samsung:serial Extract common UART
On Wed, 7 Aug 2013 09:22:33 +0200
Christian Gmeiner christian.gmei...@gmail.com wrote:
Without this change EDID_DETAILED_TIMING_VSYNC_OFFSET
and EDID_DETAILED_TIMING_VSYNC_PULSE_WIDTH macros can
not be used (compile error).
The fix is quite trivial: rename struct member to the
expected
Hey Tom,
The following changes since commit a78dac79ede7fbb4c9e816abc879655540c3f076:
nds32: fix the missing COBJS-y change (2013-08-09 01:51:24 +0800)
are available in the git repository at:
git://git.denx.de/u-boot-video.git master
for you to fetch changes up to
Common CPU info code has been refactored to use more generic name - namely
samsung_* instead of s5p_*.
This change will prevent code duplication for non armv7a based SoCs (e.g.
s3c64xx).
Signed-off-by: Lukasz Majewski l.majew...@majess.pl
---
Changes for v3:
- New patch
---
Fix the lincese header introduced by the following patches
Add TWR-P10xx board support
Add T4240EMU target
IDT8T49N222A configuration code
Add C29x SoC support
Add support for C29XPCIE board
Signed-off-by: York Sun york...@freescale.com
---
This patch fixes the lincense header for the patches
Fix the license header introduced by the following patches
Add TWR-P10xx board support
Add T4240EMU target
IDT8T49N222A configuration code
Add C29x SoC support
Add support for C29XPCIE board
Signed-off-by: York Sun york...@freescale.com
---
Change since v1: Fix typo.
Common Samsung code has been moved one level up - to ./samsung-common directory.
This would allow other - non S5P based targets to reuse this code base
Moreover duplicated header files were removed.
Signed-off-by: Lukasz Majewski l.majew...@majess.pl
---
Changes for v3:
- Comply with SPDX
Tom,
The following changes since commit d05bfd0586ccebe96e31976459c8ef45ec65e109:
Merge branch 'master' of git://git.denx.de/u-boot-i2c (2013-08-06
09:49:06 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
for you to fetch changes up to
On Mon, 2013-08-12 at 13:31 +, Gupta, Pekon wrote:
Hi,
On Tue, 2013-08-06 at 15:25 +0530, Pekon Gupta wrote:
This patch
- replaces CONFIG_AM33xx define with generic
CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW
so that all device families having required h/w capability can use ELM
When using QSGMII protocols, the first lane and third lane on each slot
need to be swapped.
Signed-off-by: Shaohui Xie shaohui@freescale.com
---
board/freescale/t4qds/t4qds.c | 39 +--
1 file changed, 37 insertions(+), 2 deletions(-)
diff --git
Hi,
I search the FAQs, but didn't quite find the right answer. I'm trying to
understand how to load a binary from either U-Boot or directly from the
bootstrapping that loads U-Boot (instead of U-Boot) and preferable multiple
binaries at once (from the code automatically the way the
This series fixes gzip, lzma, and lzo to not overflow when writing
to output buffers. Without this, it might be possible for untrusted
compressed input to overflow the buffers used to hold the decompressed
image.
To catch these conditions, I added a series of compression tests available
in the
This adds the missing compression config items to the README.
Signed-off-by: Kees Cook keesc...@chromium.org
---
README |9 +
1 file changed, 9 insertions(+)
diff --git a/README b/README
index 5c343da..247b8f3 100644
--- a/README
+++ b/README
@@ -1669,6 +1669,10 @@ CBFS (Coreboot
The output buffer size must be correctly passed to the lzma decoder or
there is a risk of overflowing memory during decompression. Switching
to the LZMA_FINISH_END mode means nothing is left in an unknown state
once the buffer becomes full.
Signed-off-by: Kees Cook keesc...@chromium.org
---
This checks the size of the output buffer and fails if it was going to
overflow the buffer during lzo decompression.
Signed-off-by: Kees Cook keesc...@chromium.org
---
lib/lzo/lzo1x_decompress.c |8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git
The output buffer size not be reset by the gzip decoder or there is a
risk of overflowing memory during decompression.
Signed-off-by: Kees Cook keesc...@chromium.org
---
lib/gunzip.c |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/lib/gunzip.c b/lib/gunzip.c
index
This passes the actual memory allocation size for the destination to the
decompression routines, avoiding potential memory overflows.
Signed-off-by: Kees Cook keesc...@chromium.org
---
common/cmd_bootm.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/cmd_bootm.c
This adds the test_compression command when building the sandbox. This
tests the existing compression and decompression routines for simple
sanity and for buffer overflow conditions.
Signed-off-by: Kees Cook keesc...@chromium.org
---
include/configs/sandbox.h |5 +
test/Makefile
Also some fix for QSGMII.
1. fix QSGMII configure of Serdes2.
2. fix PHY address of QSGMII MAC9 MAC10 for each FMAN.
3. fix dtb for QSGMII interface.
Signed-off-by: Shaohui Xie shaohui@freescale.com
---
arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 14 +++---
board/freescale/t4qds/eth.c
[sending, now subscribed so mailman won't yell at me]
This series fixes gzip, lzma, and lzo to not overflow when writing
to output buffers. Without this, it might be possible for untrusted
compressed input to overflow the buffers used to hold the decompressed
image.
To catch these conditions, I
Dear Stephen Warren,
On 08/11/2013 12:08 PM, Marek Vasut wrote:
Dear Jim Lin,
TFTP booting is slow when a USB keyboard is installed and
stdin has usbkbd added.
This fix is to change Ctrl-C polling for USB keyboard to every second
when NET transfer is running.
diff --git
Dear Stefano Babic,
Implement function vrec_header to be able to pad the final
data image file according the what has been calculated for
boot_data.length.
Signed-off-by: Stefano Babic sba...@denx.de
---
[...]
+ if (!imxhdr) {
+ fprintf(stderr, %s: malloc return
68 matches
Mail list logo
