Andy Fleming aflem...@gmail.com wrote on 2012/08/22 23:08:45:
On Mon, Jul 23, 2012 at 3:58 PM, Joakim Tjernlund
joakim.tjernl...@transmode.se wrote:
PowerPC mandates SP to be 16 bytes aligned.
Furthermore, a stack frame is added, pointing to the reset vector
which may in the way when gdb
By extracting these defines into a header, they can be re-used by other
C sources as well. This will be done by the SPL framework OS boot
support.
Signed-off-by: Stefan Roese s...@denx.de
---
arch/powerpc/include/asm/processor.h | 6 ++
arch/powerpc/lib/bootm.c | 6 --
2
This patchset ports the SPL framework to powerpc. Its based on the
SPL generalization lately done by Tom Rini. The patches can be applied
on top of his 3rd version located here:
http://github.com/trini/u-boot WIP/spl-improvements
Additionally, a new MPC5200 board port is included, the a3m071
SPL NOR flash booting support is quite simple. Only copying of the
images is needed.
On MPC5xxx we need to make sure to only use the standard memcpy()
implementation and not the MPC5xxx specific one. As the MPC5xxx
version has some complexity which is not needed for this SPL
booting.
This patch enables the SPL framework to be used on powerpc platforms
and not only ARM.
Signed-off-by: Stefan Roese s...@denx.de
---
common/spl/spl.c | 45 ++---
1 file changed, 42 insertions(+), 3 deletions(-)
diff --git a/common/spl/spl.c
This patch adds SPL booting support (NOR flash) for the
MPC5200 platforms.
Signed-off-by: Stefan Roese s...@denx.de
---
arch/powerpc/cpu/mpc5xxx/Makefile | 4 +++
arch/powerpc/cpu/mpc5xxx/spl_boot.c | 62 +
arch/powerpc/cpu/mpc5xxx/start.S| 22
By extracting getenv_f and envmatch() from cmd_nvedit.c into a
separate file, getenv_f() can be included easily into the SPL
binary. With this, SPL boards can now use getenv_f() to read
environment variables (e.g. to detect if the OS or U-Boot shall
be executed).
In the approach this is done for
This patch adds support for the a3m071 board based on the
MPC5200.
Signed-off-by: Stefan Roese s...@denx.de
---
MAINTAINERS | 2 +
board/a3m071/Makefile| 36
board/a3m071/a3m071.c| 335 +
board/a3m071/mt46v16m16-75.h |
Hi,
I've seen some attempts ([1],[2]) to add support for CAN (Controller
Area Network) interfaces.
But it seems that none of these attempts has made it into mainline U-Boot.
What's the status of the CAN support? Is anyone actively working on this?
We're looking for a possibility to output
Hello,
we recently switched to the OSELAS Toolchain for ARM1136 processors and faced a
problem considering the u-boot API.
If compiling the API demo with -Os (as default in u-boot) the demo does not run
anymore.
If activating -fno-relocate-functions in the used cflags the demo runs as
before
Hello,
we recently switched to the OSELAS Toolchain for ARM1136 processors and faced a
problem considering the u-boot API.
If compiling the API demo with -Os (as default in u-boot) the demo does not run
anymore.
If activating -fno-relocate-functions in the used cflags the demo runs as
before
Hi,
I want to add a new network protocol to u-boot. However it seems that the
most straightforward way to add a new protocol is to add it to NetLoop's
supported protocols. Of course, I would create a .c/.h pair of files to
manage the protocol and use CONFIG_XXX to ensure it doesn't add
The original code uses 'Programming Interface' field to judge if PCIE is
EP or RC mode, however, T4240 does not support this functionality.
According to PCIE specification, 'Header Type' offset 0x0e is used to
indicate header type, so for PCIE controller, the patch changes code to
use 'Header
On 22.08.2012 13:11, Benoît Thébaudeau wrote:
Hi Dirk,
On Wednesday, August 22, 2012 12:43:05 PM, Dirk Behme wrote:
On 14.08.2012 14:52, Benoît Thébaudeau wrote:
This can be useful for fuse-like hardware, OTP SoC options, etc.
For i.MX6, I have a port of the OTP support from Freescale's
Hi Mike,
Am Mittwoch, den 22.08.2012, 23:01 -0400 schrieb Mike Frysinger:
On Wednesday 22 August 2012 06:09:04 Lucas Stach wrote:
The basic device reset ensures that the device is ready to
service commands and does not need to get redone before each
network operation.
Split out the
If an u-boot image is not found, SPL thinks to load a bare
u-boot.bin image with a maximum size of 200KB.
Use CONFIG_SYS_MONITOR_LEN instead.
Signed-off-by: Stefano Babic sba...@denx.de
CC: Tom Rini tr...@ti.com
---
Note: this is based on Tom's series
ARM: SPL: Make more generic, merge
On 08/23/2012 10:40 AM, Stefano Babic wrote:
If an u-boot image is not found, SPL thinks to load a bare
u-boot.bin image with a maximum size of 200KB.
Use CONFIG_SYS_MONITOR_LEN instead.
Signed-off-by: Stefano Babic sba...@denx.de
CC: Tom Rini tr...@ti.com
---
Note: this is based on
On 21/08/2012 22:01, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
Use IMX_GPIO_NR macro.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Changes since v1:
- Remove unnecessary comment
board/freescale/mx53loco/mx53loco.c |2 +-
1 file changed, 1
On 14/08/2012 21:39, Benoît Thébaudeau wrote:
Signed-off-by: Benoît Thébaudeau benoit.thebaud...@advansee.com
Cc: Stefano Babic sba...@denx.de
---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
DENX
On 14/08/2012 22:32, Benoît Thébaudeau wrote:
Signed-off-by: Benoît Thébaudeau benoit.thebaud...@advansee.com
Cc: Stefano Babic sba...@denx.de
---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
DENX
On 14/08/2012 21:39, Benoît Thébaudeau wrote:
Signed-off-by: Benoît Thébaudeau benoit.thebaud...@advansee.com
Cc: Stefano Babic sba...@denx.de
---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
DENX
On 14/08/2012 21:40, Benoît Thébaudeau wrote:
Signed-off-by: Benoît Thébaudeau benoit.thebaud...@advansee.com
Cc: Stefano Babic sba...@denx.de
---
.../arch/arm/include/asm/arch-mx35/sys_proto.h |1 -
1 file changed, 1 deletion(-)
diff --git
On 14/08/2012 20:06, Benoît Thébaudeau wrote:
The imx_decode_pll() function does not exist for mx5, so remove its
declaration.
Signed-off-by: Benoît Thébaudeau benoit.thebaud...@advansee.com
Cc: Stefano Babic sba...@denx.de
---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
On 22/08/2012 20:30, Troy Kisky wrote:
On 8/22/2012 12:22 AM, Stefano Babic wrote:
On 21/08/2012 19:51, Troy Kisky wrote:
On 8/20/2012 11:11 PM, Stefano Babic wrote:
On 21/08/2012 01:03, Troy Kisky wrote:
Hi Troy,
So, you are saying CONFIG_ options don't belong in imx-regs.h, or
you
On 23/08/2012 10:51, Stefan Roese wrote:
On 08/23/2012 10:40 AM, Stefano Babic wrote:
If an u-boot image is not found, SPL thinks to load a bare
u-boot.bin image with a maximum size of 200KB.
Use CONFIG_SYS_MONITOR_LEN instead.
Signed-off-by: Stefano Babic sba...@denx.de
CC: Tom Rini
Hi Stefano,
On 08/23/2012 11:23 AM, Stefano Babic wrote:
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 7d15460..827ff1c 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -100,7 +100,11 @@ void spl_parse_image_header(const struct image_header
*header)
On 23/08/2012 11:28, Stefan Roese wrote:
Hi Stefano,
On 08/23/2012 11:23 AM, Stefano Babic wrote:
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 7d15460..827ff1c 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -100,7 +100,11 @@ void spl_parse_image_header(const struct
This patch correct the text base for at91sam9g10ek board
Move the text base define to config.mk
Signed-off-by: Bo Shen voice.s...@atmel.com
---
board/atmel/at91sam9261ek/config.mk |1 +
include/configs/at91sam9261ek.h |1 -
2 files changed, 1 insertion(+), 1 deletion(-)
create mode
On 22/08/2012 21:24, Matt Sealey wrote:
Allow usage of the imx-common/iomux-v3.h framework by including pad settings
for the i.MX51. The content of the file is taken from Linux kernel at
commit 5d23b39 plus the required changes to make it work in U-Boot.
The contained pad settings are the
On 22/08/2012 21:25, Matt Sealey wrote:
* Move Efika MX Smarttop and Smartbook boards into a genesi vendor directory
* Rename efikamx - mx51_efikamx since there is an mx53_efikamx and
mx6_efikamx to come
Signed-off-by: Matt Sealey m...@genesi-usa.com
---
board/{efikamx =
This patch series will add PMECC support for atmel at91sam9x5ek in u-boot.
The NAND flash driver patch is ported from kernel patch. The main different
from kernel patch is
the modification about registers access part. in this version it via a register
structure to access.
It is tested in
This patch
1. extract the hwecc initialization code into one function. It is a preparation
for adding atmel PMECC support.
2. enable CONFIG_SYS_NAND_SELF_INIT. Which make us can configurate the ecc
parameters between nand_scan_ident() and nand_scan_tail().
Signed-off-by: Josh Wu
Signed-off-by: Josh Wu josh...@atmel.com
---
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index 88b3478..ae408bc 100644
---
Signed-off-by: Josh Wu josh...@atmel.com
Acked-by: Scott Wood scottw...@freescale.com
---
drivers/mtd/nand/atmel_nand.c |3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 21dc4f5..05a6317 100644
---
The Programmable Multibit ECC (PMECC) controller is a programmable binary
BCH(Bose, Chaudhuri and Hocquenghem) encoder and decoder. This controller
can be used to support both SLC and MLC NAND Flash devices. It supports to
generate ECC to correct 2, 4, 8, 12 or 24 bits of error per sector of data.
Signed-off-by: Josh Wu josh...@atmel.com
---
include/configs/at91sam9x5ek.h |7 +++
1 file changed, 7 insertions(+)
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 82f6b48..3a5a7e6 100644
--- a/include/configs/at91sam9x5ek.h
+++
On 22/08/2012 22:10, Fabio Estevam wrote:
From: Fabio Estevam fabio.este...@freescale.com
For representing a timeout value, it makes more sense to pass it as
'unsigned int'.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
arch/arm/cpu/arm926ejs/mxs/mxs.c |6
On 22/08/2012 21:25, Matt Sealey wrote:
Efika MX boards configure their DDR pad settings twice, one in the DCD
generated
from imximage_*.cfg and again in init_drive_strength called before relocation.
Rather than doing this, roll the changes it makes into the DCD so DDR is set
up
before a
On 22/08/2012 21:25, Matt Sealey wrote:
PCBID pads seem to need time to settle due to external pulldowns, otherwise
we are reading floating GPIO pins with implicit pad pullups and get the wrong
data. However we can't wait at the time we need them before relocation,
since timers are not
On 22/08/2012 21:25, Matt Sealey wrote:
* Move Efika MX Smarttop and Smartbook boards into a genesi vendor directory
* Rename efikamx - mx51_efikamx since there is an mx53_efikamx and
mx6_efikamx to come
Signed-off-by: Matt Sealey m...@genesi-usa.com
---
board/{efikamx =
On 22/08/2012 21:25, Matt Sealey wrote:
This is a rework of a previously submitted patchset and bundles the
main board support and USB support into a single commit.
It requires the patch mx5: add iomux-mx51.h include
* Use iomux-mx51.h include to simplify board configuration.
* Simplify
On 22/08/2012 12:43, Dirk Behme wrote:
On 14.08.2012 14:52, Benoît Thébaudeau wrote:
This can be useful for fuse-like hardware, OTP SoC options, etc.
For i.MX6, I have a port of the OTP support from Freescale's U-Boot to
our mainline U-Boot in the queue [1].
As I don't have the overview
Dear Bo Shen,
On 23.08.2012 11:34, Bo Shen wrote:
This patch correct the text base for at91sam9g10ek board
Move the text base define to config.mk
Signed-off-by: Bo Shen voice.s...@atmel.com
---
board/atmel/at91sam9261ek/config.mk |1 +
include/configs/at91sam9261ek.h |1 -
2
Hi!
diff --git a/Makefile b/Makefile
index 5ce5cc3..12aa372 100644
--- a/Makefile
+++ b/Makefile
@@ -369,7 +369,7 @@ BOARD_SIZE_CHECK =
endif
# Always append ALL so that arch config.mk's can add custom ones
-ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin
If an u-boot image is not found, SPL thinks to load a bare
u-boot.bin image with a maximum size of 200KB.
Use CONFIG_SYS_MONITOR_LEN instead.
Signed-off-by: Stefano Babic sba...@denx.de
CC: Tom Rini tr...@ti.com
CC: Stefan Roese stefan.ro...@gmail.com
---
Changes:
- move the #ifdef out of the C
Hi!
+/*
+ * Release peripherals from reset based on handoff
+ */
+void reset_deassert_peripherals_handoff(void)
+{
+ unsigned int val = 0;
+ writel(val, reset_manager_base-per_mod_reset);
writel(0, ...
Ok.
+int dram_init(void)
+{
+ gd-ram_size = get_ram_size((long
On Wed 2012-08-22 18:13:53, Tom Rini wrote:
On Thu, Aug 23, 2012 at 12:26:53AM +0200, Marek Vasut wrote:
Dear dingu...@altera.com,
From: Dinh Nguyen dingu...@altera.com
Add minimal support for Altera's SOCFPGA Cyclone 5 hardware.
Signed-off-by: Dinh Nguyen
Hi Pavel,
On 08/23/2012 12:43 PM, Pavel Machek wrote:
+static unsigned long spl_parse_image_header(const struct image_header
*header) +{
+ /* checking for mkimage signature */
+ if (__be32_to_cpu(header-ih_magic) == IH_MAGIC) {
+ /* Valid image. Extract information out of header
On 08/23/2012 12:46 PM, Stefano Babic wrote:
If an u-boot image is not found, SPL thinks to load a bare
u-boot.bin image with a maximum size of 200KB.
Use CONFIG_SYS_MONITOR_LEN instead.
Signed-off-by: Stefano Babic sba...@denx.de
CC: Tom Rini tr...@ti.com
CC: Stefan Roese
Hi Tom,
On 08/23/2012 01:19 AM, Tom Rini wrote:
The following patch series merges the davinci and omap-common SPL
frameworks into a single framework, CONFIG_SPL_FRAMEWORK along with a
few small cleanups to the code to make it a little smaller and more
flexible. The end result is that davinci
This patch fixes SDRAM configuration and size visibility fot Trats board.
Code for MMC initialisation is moved from board file to pinmux.
MMC0 and MMC2 are supported. Both tested on Trats and Universal C210 boards.
MMC initialisation for boards Trats and Universal C210 is done using pinmux.
Low
SDRAM setup alike to ORIGEN Dev board.
Signed-off-by: Piotr Wilczek p.wilc...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
CC: Minkyu Kang mk7.k...@samsung.com
---
Changes for v2:
- no changes
include/configs/trats.h | 17 +++--
1 files changed, 11
Full 1GiB is visible
Signed-off-by: Piotr Wilczek p.wilc...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
CC: Minkyu Kang mk7.k...@samsung.com
---
Changes for v2:
- no chages
board/samsung/trats/trats.c |8 +++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff
This patch add pinmux settings for Exynos4 for mmc0 and mmc2
Signed-off-by: Piotr Wilczek p.wilc...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
CC: Minkyu Kang mk7.k...@samsung.com
---
Changes for v2:
- mmc initialisation code moved to pinmux instead of creating a new
This patch use the pinmux for mmc configuration for Universal C210
Signed-off-by: Piotr Wilczek p.wilc...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
CC: Minkyu Kang mk7.k...@samsung.com
---
Changes for v2:
- mmc initialisation using pinmux
This patch use the pinmux for mmc configuration for Trats
Signed-off-by: Piotr Wilczek p.wilc...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
CC: Minkyu Kang mk7.k...@samsung.com
---
Chaneges for v2:
- mmc iniatialisation using pinmux
board/samsung/trats/trats.c | 62
Low level initialisation is done by another bootloader
Signed-off-by: Piotr Wilczek p.wilc...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
CC: Minkyu Kang mk7.k...@samsung.com
---
Changes for v2:
- no changes
board/samsung/universal_c210/Makefile|1 -
On 23/08/2012 01:19, Tom Rini wrote:
Hey all,
The following patch series merges the davinci and omap-common SPL
frameworks into a single framework, CONFIG_SPL_FRAMEWORK along with a
few small cleanups to the code to make it a little smaller and more
flexible. The end result is that davinci
Hi Tom,
On Thu, Aug 23, 2012 at 1:19 AM, Tom Rini tr...@ti.com wrote:
Hey all,
The following patch series merges the davinci and omap-common SPL
frameworks into a single framework, CONFIG_SPL_FRAMEWORK along with a
few small cleanups to the code to make it a little smaller and more
Hi Tom,
On Thu, Aug 23, 2012 at 1:19 AM, Tom Rini tr...@ti.com wrote:
This file documents when to build for da850evm and when to build for
da850_am18xxevm. It also documents how to write the u-boot.ais file to
persistent storage (such as SPI), in some cases as well as how to write
a recovery
Hi Tom,
On Thu, Aug 23, 2012 at 1:19 AM, Tom Rini tr...@ti.com wrote:
- Convert the non-relocation part of board_init_f to spl_board_init,
turn on CONFIG_SPL_BOARD_INIT in the configs.
- Remove duplicated code.
- Add spl_boot_device() that returns the statically chosen boot device.
On 08/23/2012 03:31 AM, Stefano Babic wrote:
On 22/08/2012 12:43, Dirk Behme wrote:
On 14.08.2012 14:52, Benoît Thébaudeau wrote:
This can be useful for fuse-like hardware, OTP SoC options, etc.
For i.MX6, I have a port of the OTP support from Freescale's U-Boot to
our mainline U-Boot in the
On Thu, Aug 23, 2012 at 11:07 AM, Mike Frysinger vap...@gentoo.org wrote:
On Monday 20 August 2012 10:22:23 Zhizhou Zhang wrote:
+void __weak _machine_restart(void)
+{
+}
this should be:
void __noreturn __weak _machine_restart(void)
{
while (1);
}
there should also be a
On 20/08/2012 22:55, Benoît Thébaudeau wrote:
gpio_get_value() should use PSR like Linux, not DR, because DR does not always
reflect the pin state, while PSR does. This is especially useful to detect a
short circuit on a GPIO pin configured as output, or to read the level of a
pin
controlled
On 08/23/2012 06:14 AM, Christian Riesch wrote:
Hi Tom,
On Thu, Aug 23, 2012 at 1:19 AM, Tom Rini tr...@ti.com wrote:
- Convert the non-relocation part of board_init_f to spl_board_init,
turn on CONFIG_SPL_BOARD_INIT in the configs.
- Remove duplicated code.
- Add spl_boot_device() that
On Thu, Aug 23, 2012 at 11:04 AM, Mike Frysinger vap...@gentoo.org wrote:
On Monday 20 August 2012 10:22:22 Zhizhou Zhang wrote:
This patch add mips64 cpu support.
Changes in V3:
- merge related files into one patch, no longer one file one patch.
- add detailed commit message.
-
On 06/08/2012 17:29, Philippe Reynes wrote:
There is a little change on gpio_get_value because
on mx27 the register to read is ssr and not dr.
Signed-off-by: Philippe Reynes trem...@yahoo.fr
---
Hi Philippe,
arch/arm/cpu/arm926ejs/mx27/generic.c | 11 +++---
This gives us a string like 20120822150855 which encodes the build time.
This allows automated version checking and flashing of U-Boot to be performed,
for example, in boot.scr files (or scripting in general).
Signed-off-by: Matt Sealey m...@genesi-usa.com
Cc: Stefano Babic sba...@denx.de
Cc:
On 23/08/2012 16:44, Matt Sealey wrote:
This gives us a string like 20120822150855 which encodes the build time.
This allows automated version checking and flashing of U-Boot to be performed,
for example, in boot.scr files (or scripting in general).
Signed-off-by: Matt Sealey
Because of the way USB pad settings are handled it doesn't make sense to
be able to build the Efika MX board support without CONFIG_CMD_USB turned
on. So, we change the build to always compile in USB support.
We do not need to check for CONFIG_CMD_USB like we do with CONFIG_MXC_SPI
since the USB
Rewrite and refine the configuration for the Efika MX to support the
board features effectively.
In summary:
* Reorder configuration so it is more readable
* Bring the configuration up to a production-compatible boot process
by implementing scanning of bootable partitions on MMC and ATA
Update maintainer for efikamx and efikasb to myself.
Signed-off-by: Matt Sealey m...@genesi-usa.com
Cc: Stefano Babic sba...@denx.de
Cc: Marek Vasut ma...@denx.de
---
MAINTAINERS |7 +--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index
On Thu, Aug 23, 2012 at 9:49 AM, Stefano Babic sba...@denx.de wrote:
On 23/08/2012 16:44, Matt Sealey wrote:
This gives us a string like 20120822150855 which encodes the build time.
This allows automated version checking and flashing of U-Boot to be
performed,
for example, in boot.scr files
On 08/23/2012 01:12 AM, Stefan Roese wrote:
SPL NOR flash booting support is quite simple. Only copying of the
images is needed.
On MPC5xxx we need to make sure to only use the standard memcpy()
implementation and not the MPC5xxx specific one. As the MPC5xxx
version has some complexity
On 08/23/2012 05:07 PM, Tom Rini wrote:
On 08/23/2012 01:12 AM, Stefan Roese wrote:
SPL NOR flash booting support is quite simple. Only copying of the
images is needed.
On MPC5xxx we need to make sure to only use the standard memcpy()
implementation and not the MPC5xxx specific one. As the
Hi Scott,
On Wed, Aug 22, 2012 at 8:38 PM, Scott Wood scottw...@freescale.com wrote:
On 08/22/2012 03:34 PM, Joe Hershberger wrote:
Hi Scott,
On Fri, Aug 17, 2012 at 3:53 PM, Scott Wood scottw...@freescale.com wrote:
On 08/17/2012 03:31 PM, Joe Hershberger wrote:
NAND unlock command allows
Hi Mike,
On Wed, Aug 22, 2012 at 10:17 PM, Mike Frysinger vap...@gentoo.org wrote:
On Friday 17 August 2012 16:49:35 Joe Hershberger wrote:
*/
#define CONFIG_FILE /etc/fw_env.config
+#ifndef CONFIG_FILE
this doesn't make any sense. CONFIG_FILE is defined literally right above
Dear Lv Terry-R65388,
Hi Pavel,
The ahci.c is a ahci driver using pci interface, while dwc_asata is not.
u-boot don't have a pure ahci driver now, thus we have to reuse some
ahci
parts from ahci.c in dwc_asata.c.
Ok, I think we can unify that eventually.
[...]
From 0a92ab264ca7f87f198afe401bc552000fe2bd12 Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy ashokkourla2...@gmail.com
Date: Thu, 23 Aug 2012 21:01:34 +0530
Subject: [PATCH] mx6qarm2:Use IMX_GPIO_NR macro
Signed-off-by: Ashok Kumar Reddy ashokkourla2...@gmail.com
---
On 08/23/2012 05:52 AM, Christian Riesch wrote:
Hi Tom,
On Thu, Aug 23, 2012 at 1:19 AM, Tom Rini tr...@ti.com wrote:
This file documents when to build for da850evm and when to build for
da850_am18xxevm. It also documents how to write the u-boot.ais file to
persistent storage (such as
Hi Mike,
On Wed, Aug 22, 2012 at 10:30 PM, Mike Frysinger vap...@gentoo.org wrote:
On Friday 17 August 2012 16:49:38 Joe Hershberger wrote:
+ * Break reads up into very small chunks so fw_printenv doesn't
+ * block the kernel long enough to starve other kernel tasks.
Hi,
I found ubifsload does not support relative symbolic link.
A patch in 2009 said that it could resolve relative symlink. It has
already been merged into fs/ubifs/ubifs.c. But it does not work
today.
Direct symlink, i.e. to_target or /path/to_target, works. But
relative symlink, i.e.
On Thu, Aug 23, 2012 at 1:11 PM, Ashok ashokkourla2...@gmail.com wrote:
From 0a92ab264ca7f87f198afe401bc552000fe2bd12 Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy ashokkourla2...@gmail.com
Date: Thu, 23 Aug 2012 21:01:34 +0530
Subject: [PATCH] mx6qarm2:Use IMX_GPIO_NR macro
On 23/08/2012 18:11, Ashok wrote:
From 0a92ab264ca7f87f198afe401bc552000fe2bd12 Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy ashokkourla2...@gmail.com
Date: Thu, 23 Aug 2012 21:01:34 +0530
Subject: [PATCH] mx6qarm2:Use IMX_GPIO_NR macro
Signed-off-by: Ashok Kumar Reddy
From 9f76cd6a79c6595fc058e9103d9d4eebd138a2af Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy ashokkourla2...@gmail.com
Date: Thu, 23 Aug 2012 21:24:53 +0530
Subject: [PATCH] mx5:Use IMX_GPIO_NR macro
Signed-off-by: Ashok Kumar Reddy ashokkourla2...@gmail.com
---
On Thu, Aug 23, 2012 at 1:43 PM, Ashok ashokkourla2...@gmail.com wrote:
From 9f76cd6a79c6595fc058e9103d9d4eebd138a2af Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy ashokkourla2...@gmail.com
Date: Thu, 23 Aug 2012 21:24:53 +0530
Subject: [PATCH] mx5:Use IMX_GPIO_NR macro
Signed-off-by:
On 08/23/2012 02:21 AM, Joakim Tjernlund wrote:
Andy Fleming aflem...@gmail.com wrote on 2012/08/22 23:08:45:
On Mon, Jul 23, 2012 at 3:58 PM, Joakim Tjernlund
joakim.tjernl...@transmode.se wrote:
PowerPC mandates SP to be 16 bytes aligned.
Furthermore, a stack frame is added, pointing to
On 08/23/2012 01:12 AM, Stefan Roese wrote:
This patch enables the SPL framework to be used on powerpc platforms
and not only ARM.
[snip]
+#ifdef CONFIG_ARM
/* Define global data structure pointer to it*/
gd_t gdata __attribute__ ((section(.data)));
+#endif
So you handle cleaning up the
This patch (commit 20959471b5d07fdeb8603b918d80385aa2954711),
strangely, causes the error below to happen when I build
P1010RDB_36BIT_NAND:
Configuring for P1010RDB_36BIT_NAND - Board: P1010RDB, Options: P1010RDB,36BIT,N
AND
make[1]: *** [/local/afleming/u-boot/nand_spl/u-boot-spl] Error 1
make:
On 08/23/2012 10:54 PM, Andy Fleming wrote:
This patch (commit 20959471b5d07fdeb8603b918d80385aa2954711),
strangely, causes the error below to happen when I build
P1010RDB_36BIT_NAND:
Configuring for P1010RDB_36BIT_NAND - Board: P1010RDB, Options: P1010RDB,36BIT,N
AND
make[1]: ***
On 08/23/2012 12:24 PM, Andy Fleming wrote:
This patch (commit 20959471b5d07fdeb8603b918d80385aa2954711),
strangely, causes the error below to happen when I build
P1010RDB_36BIT_NAND:
Configuring for P1010RDB_36BIT_NAND - Board: P1010RDB, Options:
P1010RDB,36BIT,N
AND
make[1]: ***
Very top of Wolfgang's master branch.
On Thu, Aug 23, 2012 at 12:57 PM, Scott Wood scottw...@freescale.com wrote:
On 08/23/2012 12:24 PM, Andy Fleming wrote:
This patch (commit 20959471b5d07fdeb8603b918d80385aa2954711),
strangely, causes the error below to happen when I build
On Thu, Aug 23, 2012 at 12:24 PM, Andy Fleming aflem...@gmail.com wrote:
I'm guessing this change increased the amount of inlining. Sadly, the
subsequent patches, which were intended to shrink the SPL build, were
not enough to fix this problem.
Maybe there are places where we can use raw I/O
On 08/23/2012 01:03 PM, Andy Fleming wrote:
On Thu, Aug 23, 2012 at 12:57 PM, Scott Wood scottw...@freescale.com wrote:
On 08/23/2012 12:24 PM, Andy Fleming wrote:
This patch (commit 20959471b5d07fdeb8603b918d80385aa2954711),
strangely, causes the error below to happen when I build
On 08/23/2012 07:10 PM, Tom Rini wrote:
+#ifdef CONFIG_ARM
/* Define global data structure pointer to it*/
gd_t gdata __attribute__ ((section(.data)));
+#endif
So you handle cleaning up the BSS differently, interesting. I'm going
to see if that would work for ARM too..
Yes. Might be
On 08/21/2012 02:18 PM, Lucas Stach wrote:
With this series we are able to initialize USB controllers
using an external ULPI phy AKA USB2 on Tegra 2 devices.
This was tested to work on a Toradex Colibri T20 board,
where USB2 is used to access the ASIX ethernet chipset.
Testing was done with
Scott Wood scottw...@freescale.com wrote on 2012/08/23 18:53:14:
On 08/23/2012 02:21 AM, Joakim Tjernlund wrote:
Andy Fleming aflem...@gmail.com wrote on 2012/08/22 23:08:45:
On Mon, Jul 23, 2012 at 3:58 PM, Joakim Tjernlund
joakim.tjernl...@transmode.se wrote:
PowerPC mandates SP to
On 08/23/2012 11:16 AM, Stefan Roese wrote:
On 08/23/2012 07:10 PM, Tom Rini wrote:
+#ifdef CONFIG_ARM
/* Define global data structure pointer to it*/
gd_t gdata __attribute__ ((section(.data)));
+#endif
So you handle cleaning up the BSS differently, interesting. I'm going
to see if
We have no idea where the DCD was derived from for Smartbook support, but they
differ from the Smarttop settings, MX51EVK settings and certainly don't
correspond to any shipped or development version of U-Boot that Genesi has ever
had on any Smartbook.
So, copy the calibrated, verified settings
On Thursday 23 August 2012 12:26:08 Joe Hershberger wrote:
On Wed, Aug 22, 2012 at 10:30 PM, Mike Frysinger wrote:
On Friday 17 August 2012 16:49:38 Joe Hershberger wrote:
+ * Break reads up into very small chunks so fw_printenv doesn't
+ * block the kernel long enough to starve other
1 - 100 of 132 matches
Mail list logo
