Public bug reported:
I've been running Ubuntu for 5 years, and using shutter for most of that
time. I have used each released version starting with 8.10. In all
versions 13.10 and prior when an image was captured with Shutter, I
could right click on the image, a menu selection would give me an
When the problem first developed, I sent the output to the boot-utility
folks also. It was a while before they got back to me, plus I didn't get
back to them immediately because I felt I would probably find something
in the Internet how to make it work. I didn't, so I followed up with
them. First
Public bug reported:
My computer is 5 months old. Was dual booting Windows 8.1 and Ubuntu
13.10. No issues. Did a clean install of 14.04 final beta to the
partition which had 13.10. Upon restart, I can only boot to Ubuntu. If I
try windows from grub menu, it reverts right back to Ubuntu. If I try
I also have upgraded three machines with dual boots of Windows 7/ Ubuntu
13.10 to Windows 7/Ubuntu 14.04. All three of those machines work
perfectly.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Hi Phillip,
Attached is the /boot/grub/grub.cfg file.
Don
On Wed, Apr 16, 2014 at 7:29 PM, Phillip Susi ps...@ubuntu.com wrote:
Please attach your /boot/grub/grub.cfg file.
** Changed in: grub (Ubuntu)
Status: New = Incomplete
** Package changed: grub (Ubuntu) = grub2 (Ubuntu)
This issue is still present with Ubuntu 13.10 and LibreOffice 4.1.5.3.
From reading the comments above, some are saying this is a feature. I
don't think so, and the collate should not be an issue. Single page
dosuments have the same thing happen. For 10 copies of a single page the
printer gets 10
Hi Javi,
I just set up Ubuntu 13.10 on a new system the end of last week. The
install, including cups-pdf, went fine, and cups-pdf worked as it should.
The password that is being asked for in localhost:631 is the same one
you use when you enter your password for updates.
Don
On 12/04/2013
Yes, this workaround does work!! Thank you. I had read about a PPD
file for cups-pdf in the cups-pdf site, but didn't know where to find
it.
I think the issue is that the PPD file never gets installed as the
driver for cups-pdf when cups-pdf in installed, not that some upgrade
wipes it out.
Hi Till
There isn't any. Only the two networked printers show up. Attached is a
screenshot.
One other tidbit. Last week I purged and reinstalled cups-pdf a couple
of time trying to get it to work. I had gone into Localhost 631 and
noticed in the PDF Printer it listed the driver as Local Raw
Printout - opens fine in document viewer.
** Attachment added: printout
https://bugs.launchpad.net/ubuntu/+source/cups-pdf/+bug/1236120/+attachment/3876121/+files/printout
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Hi Till,
I'm sorry for the delay in getting back to you. The physical printers on the
network work fine. I have Ubuntu 13.10 on three machines. They all do the same
thing. I will send the error log, printout, and the output from cups showuing
the same file which did print properly in the
Error Log
** Attachment added: error_log
https://bugs.launchpad.net/ubuntu/+source/cups-pdf/+bug/1236120/+attachment/3876120/+files/error_log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1236120
This is the same file as in the printout in the last attachement. When I
open Nautilus to look for the created pdf files, it almost looks like
there is something in it for an instance and then the icon goes blank.
** Attachment added: PDF.pdf
Public bug reported:
In 13.10, cups-pdf returns a blank page for the putput. It was working
perfectly in 13.04. In researching old bug reports on cups-pdf, this
issue has arisen before, with the soultion being to purge the system of
cups-pdf, and then doing a new install of cups-pdf. I have done
Hi,
I'm the person or initally reported this bug. This is an update. I've
upgraded my computers to Ubuntu 13.10 Beta 2. The issue above still
happens with openjdk-7 and 8, as well as the Oracle version of Java 7
and 8. When trying to print the documents in OpenJDK 7 or 8 or Oracle
Java 7 or 8,
I did a clean install of Ubuntu 13.10. Cups-pdf will only print a single, blank
page regardless of the number of pages, or waht application is being printed
from. I did the following from above:
dpkg --purge cups-pdf ; apt-get install cups-pdf
but that did not fix the issue. Reinstall didn't
Till,
I followed the instructions as per the netwrok section of the above
page. Both printers pinged fine. On the nmap for each IP address, the
Samsung showed up, but it said the Epson might be blocking, and to use
nmap -Pn. Then it did show a printer there. I ran through everything
else (no
Public bug reported:
This is a new, clean isntall of Ubuntu 13.10 Beta 2. I have two networked
printers on my network:
Samsung ML-2955ND
Epson Work Force WP-4530
In Ubuntu 13.04, all my systems just found the ML-2955ND and it was
installed auntomatically through the print manager. Neither the
With a fully updated updated 13.04 with gstreamer 0.10.13-5, DVD's still
give the same error. Screenshot attached.
** Attachment added: Error Message
https://bugs.launchpad.net/ubuntu/+source/gstreamer0.10/+bug/1171578/+attachment/3735748/+files/Error.png
--
You received this bug
Gerhard's solution worked perfectly for me!! Thank you Gehard!!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1167469
Title:
PdfSam does not start - FATAL GuiClient Error
Public bug reported:
Many DVD's which played fine in 12.10 will not play in 13.04. An error
windoe comes up saying the stream is in the wrong format. Medibuntu and
libdvdcss2 are installed.
ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: libgstreamer0.10-0 0.10.36-1ubuntu2
I just did an new install of Ubuntu 13.04 this evening using the 13.04
Beta 2 DVD. The computer has nvidia video. Everything worked fine. Then
I did the updates as I always do after a new install. I rebooted, and no
video. This system has only Ubuntu on, so I don't get any options to
select from
Public bug reported:
In 13.04, when trying to play any midi in the default payer, Rythumbox, or
Banshee, the playing fails. In two of the players I get the error message:
Invalid Commandline
The parameters passed to the application had an invalid format. Please file a
bug!
The parameters were:
Thank you again so much!!!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1066932
Title:
Documents Retrived as Tiff Images Print as Blank Pages
To manage notifications about this bug go to:
Till, you hit the nail on the head!!! You are wonderful
I have no way of going back to my 12.10 installs since they have all been
updated to 13.04. But I ran some tests on 13.04. Here are the results:
IcedTea-7-jre - current version from repository - fails
Oracle 1.7.0_17 - from
Thank you for your response!
Attached are the output files for the Cups error log and the Capturing
print job data. The only thing printed on the Capturing print job data
is text at the bottom of the page. The entire tiff picture area is
blank.
I worked for about 3 hours trying to make the
Additional Attachement
** Attachment added: printout CapturingPrintJobData
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1066932/+attachment/3642682/+files/printout%20CapturingPrintJobData
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
This same bug is present in Ubuntu 13.04 Beta 2
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1066932
Title:
Documents Retrived as Tiff Images Print as Blank Pages
To manage notifications about
The cups updates to Ubuntu that were pushed out today did not fix the
situation. The system which generates the pages is Acordex Imaging
Systems.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1066932
Here is some additional information. I've attached a view of the
broswer. When viewing deeds, a separate toolbar comes up in the browser
which is used to view different pages in the deed. This toolbar includes
the printing button for the deed, which is used in place of the regular
browser printing
This is the second attachment which is a pdf file printed on 7/5/12 with
cups-pdf in Ubuntu 12.04.
** Attachment added: DeedUbuntu1204.pdf
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1066932/+attachment/3438955/+files/DeedUbuntu1204.pdf
--
You received this bug notification because
This is the third attachment. It is a copy of the same deed printed with
Ubuntu 12.10 today. Please note that the time stamp does print on the
bottom of the pages just as it did in the second attachment, but the
rest of the page, which is a tiff image, just shows up as blank.
I'll be happy to do
One additional piece of information. If I print to a printer instead of
cups in Ubuntu 12.10, I get the blank pages from the printer with just
the time stamp on the bottom, the same as if I print to cups, so it is
more than jsut a cups issue.
--
You received this bug notification because you are
Public bug reported:
I print deeds and other documents from court house records. They are
accessed by a browser through java. Both Firefox and Chrome work fine.
Java is used to retrieve these documents for viewing. For printing,
there is a special button to click for printing which allows page
Hi Ted,
I've upgraded to Ubuntu 12.10 Beta 2. Initially (about 2 weeks ago), the
Samsung ML-1710 was working fine. There have been several cups updates
since then. I now have the exact same issue as originally reported at
the the top of this page. When I boot up and first turn the printer on,
the
Public bug reported:
I just upgrades from Ubuntu 12.04 to 12.10. Upon reboot it said there
was a problem identifying my video. I went through a couple of windows
and it said it was able to restore my previous settings. However on
boot, after entering my password, I only get my background picture
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1060343
Title:
[Acer Aspire E360] suspend/resume failure
To manage notifications about this bug go to:
The title there was put in place automatically. There was initially a
shutdown problem also, but my display was my primary concern. I tried
using the terminal to purge the ATI driver, and then reinstalled it, but
there wasn't anyway I could get anything to display other than my
background picture.
Hi Till,
I have not had any issues except once last week. The printer took the
job. It awoke from power save mode, but then just quit thinking it had
printed the job. But this happened only once. I turned it off and back
on and it was fine. I did have an issue with the same printer (Samsung
I have not had any issues in Ubuntu 12.04. When it was an issue, a
generic mouse would not work but a Logitech mouse would work. Changing
the generic mouse to a front USB port would work, but using a rear port
would not work. If the mouse was frozen, simply unplugging it and
plugging it back
With Chrome 21.0.1180.41 Beta, java is not functional. I receive a
message that the IcedTea is out of date. All updates from Ubuntu have
been applied. I have openjdk-6-jre version 6b24.1.11.3-1ubuntu0.12.04.1.
The plugin is IcedTea-plugin1.2-2ubuntu1. Shouldn't this be updated
through Ubuntu?
--
Matt,
I upgraded 4 computers using the drivers from swat 4 to 6 weeks ago.
Three have 295.49, and one has 295.53. The 295.40 driver was nvidia-
current. The swat drivers replace the driver in nvidia-current, which
was 295.40 originally. I locked the nvidia-current from swat using
synaptic and no
I will second that! Thnak you so much for your outstanding
work!!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/979431
Title:
Samsung ML-1710 Fails to Print
To manage notifications
Thank you so much for your input. I will keep an eye out for the 302.xx
version.
On 06/05/2012 06:27 AM, madbiologist wrote:
You can only attach one file at a time in Launchpad.
I'm not 100% sure if the updates should have automatically switched from
nvidia-current to nvidia-current-updates,
Hi,
Attached are two screen shots from Synaptic. I'll insert them here also,
but I'm not sure they will display in the body of the response on the board.
Nvidia 1
I locked the 295.53 driver once it was installed. Before I installed
that driver, nvidia-current was 295.40 and it showed as the
Sorry!! Attached are the screen shots for 214. You are correct in
your assumption about following the nvidia-current package. Should the
updates have automatically switched from nvidia-current to nvidia-
current-updates? It looks like I can only do one attachemtn, but I tried
to do both. The
I don't see an attachment again!! Sorry. I will try again!!
** Attachment added: Nvidia2.png
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/982485/+attachment/3175136/+files/Nvidia2.png
--
You received this bug notification because you are a member of Ubuntu
I will need to get back to you tomorrow. That computer is in my office.
Sorry!
On 06/03/2012 09:09 AM, madbiologist wrote:
@Don - what was the exact name of the package in Synaptic?
--
*~~*
Don C. Myers
e-PRO Certified by the
I have a secondary computer at the office which is not used frequently.
I was using it the last few days last week. It had a clean, updated
install of 12.04 64 bit. The video performancwe was very laggy. So I
took a look at what it had for video. It was nvidia, and thew 295-40
driver was
I've upgraded two computers to 295.49, and one to 295.53 and have tested
them for about a week. There have not been any issues with any of them.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/982485
The above information from yesterday did not totally fix the problem.
Today it would work for a while, and then even though it would say idle
- Rendering completed, I had the same issue before. This happened twice.
What I found each time was if I would print a test page, then it would
work
I did the following today. I downloaded the 2.0 driver for 64 bit systems (I'm
running Ubuntu 12.04 64 bit) from openprinting.org:
http://www.openprinting.org/printer/Samsung/Samsung-ML-1710
I deleted the Samsung ML-1710 from my printers. In Printers in 12.04,
right click on the icon and select
Hi,
Here is a copy of my report. What is happening is when you first turn on
the printer and check the printer state in the printer status box, it
says idle. When you send the first job to the printer, the status box
changes to Processing - Sending data to printer. However, when the
printing is
Hi Dave,
For a while it seemed to be fixed, but now it is baxk. On Monday I'll
try to get the logs requested above. Maybe you can do likewise.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/979431
Wrobeiro,
Please read post #78 above. Also, not all NVidia systems were affected.
I had one which is working fine with 295-40. But three did not. I do
understand your frustration, If you read my other posts, I spent a good
deal of time dealing with three other machines which did not work.
Amir,
I've had 4 machines with NVidia drivers. One is fine with the 295.40
driver. One is fine with the nouveau driver, including 3D. On the other
two machines the nouveau driver will only work in 2G. The nouveau driver
seems to have different capabilities with different versions of NVidia.
Tom, when you are at the login screen, instead of typing your password
in, click on the little gear in the top right of the login box, and
select Ubuntu 2D. then type in your pass work. You system should work in
2D.
--
You received this bug notification because you are a member of Ubuntu
Bugs,
Wal,
Thank you so much for your post #76. That did work perfectly. I had
tried the driver from x-swat earlier today, but ended up with 298-40
since I didn't realize that a full description of the driver was needed.
I just had nvidia-current with nothing else in the apt-get install line
Bruce,
In response to post #63, I have three computers with Nividia. One is a
desktop with a GForce 9500 card. It works perfectly fine with the 295-40
driver. Two computers, one desktop and one laptop, have integrated
Nividia graphics. I'm running Nouveau on both. The resolution is
automatically,
I tried installing the 295.33 drivers twice. Everything seemed to go
fine, however, after both tries I could not get back to a graphical
interface. I reverted back to the open source Nouveau video driver until
this is fixed, which I hope is real soon. The open source driver is
working reasonably
Does anyone know what the current driver was that was installed by
default with Ubuntu 12.04 LTS Beta 2 prior to the patch that installed
295.40? I had been using the system for about a week and a half prior to
this problem, and it worked great in all respects
--
You received this bug
Public bug reported:
I replaced Ubuntu 11.10 with 12.04 64 bit beta on my brother's laptop 1
1/2 weeks ago. Everything worked perfectly until last night when I did
updates for him. Following the updates, which were listed as a Partial
Distribution Upgrade, upon rebooting, there was not any
Public bug reported:
I tried checking for updates on this system, and received the following
error message:
An unresolvable problem occurred while initializing the package
information.
Please report this bug against the 'update-manager' package and include
the following error message:
I had no problems using IcedTea plugin 1.1.3- 1ubuntu1.1 with Chrome
Beta in Ubuntu 11.10. I've upgraded four computers to 12.04 Beta 2
within the last week. All are using a newer 1.2 series IcedTea Plugin,
which was updated in the updates that came out yesterday/last night. I
do my own real
Hi Till,
Yesterday there were over 100 updates to Ubuntu 12.04. Nothing there
helped with the printer. I had another 160 updates, including a kernel
up date this morning. Since doing all of the updates today, the printer
has worked perfectly.
Don
On 04/12/2012 10:43 AM, Till Kamppeter wrote:
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/979431
Title:
Samsung ML-1710 Fails to Print
To manage notifications about this bug go to:
Public bug reported:
When I click print the printer icon always shows up in the top status bar, but
half the time the icon disappears and nothing has printed. If the printer is in
power save, it will always wake up. Sometimes clicking print a second time will
print the document, other times I
I have the same issue using Ubuntu 12.04 Beta 2, 64 bit running Chrome
18.0.1025.142 beta and with IcedTea-Web Plugin (using IcedTea-Web 1.2
(1.2-1ubuntu1)). Java applets crash and a sad white face appears on a
black background.
--
You received this bug notification because you are a member of
*** This bug is a duplicate of bug 507836 ***
https://bugs.launchpad.net/bugs/507836
I just installed the 12.04 Beta 2. There are things I like synaptic for.
I installed cups-pdf through synaptic. When the install was complete, I
got the error message that the software center had crashed. The
I just installed Ubuntu 12.04 Beta 2 64 bit. There are things I like
synaptic for. I installed synaptic though the software center. then I
installed cups-pdf through synaptic. When the install was complete, I
got the error message that the software center had crashed. The same
thing happened when
On two machines with Ubuntu 11.10, it will not start automatically even
though startup applications shows it is supposed to start. When booting
it looks like it is trying to start, but then stalls, the desktop
picture flashes, and then the boot completes normally. If I click the
dash button, then
This is just a little more information to add to my previous post. With
the 1400w printer not installed at all I tried to install it using the
cups interface in localhost using the most recent PPD. The results were
the same as when Ubuntu would find the connected printer, install it,
but it would
I have a related problem running Ubuntu 11.10 32 bit trying to install a
Konica-Minolta 1400w printer. When I connect the printer, Ubuntu sees
then printer, and proceeds to install it. Then I get a message it is
installed and the printer is shown in the available printers. However,
if I try to
I presently have Ubuntu 11.10 32 bit installed on the computer I had the
issues with. This was an upgrade from 11.04 through the Ubuntu
repositories. I've had no issues with 11.10 not shutting everything down.
On 11/07/2011 11:39 AM, Alan Stern wrote:
To everybody who has been affected by this
I'm sorry. I have many irons in the fire. I'm in the middle of corn and
soybean harvesting, as well as having a full time job. I will not be
able to try this immediately.
Don
On 11/09/2011 12:20 PM, Alan Stern wrote:
Thanks Don, but that doesn't address the question I was asking. It
doesn't
Hi,
The latest Ubuntu kernel update ( 2.6.38-11-generic-pae #48-Ubuntu )
seems to have fixed the issue for me.
Don
On 08/21/2011 06:13 PM, Julian Wiedmann wrote:
Andi,
is this still an issue after updating the kernel (to 2.6.38-11.48)?
** Changed in: linux (Ubuntu)
Status:
Yesterday the kernel through the normal updates was updated to
2.6.38-10. The problem still exists.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to the bug report.
https://bugs.launchpad.net/bugs/42149
Title:
USB devices are not powered
Hi,
Quite honestly I've been swamped at work and I also farm part-time. We
are finally getting some good weather to be in the field, so I haven't
given it a try yet. I also figured I couldn't mess anything up if I just
waited for the Ubuntu patch. I did go to that link last week, but wasn't
@madbiologist - I read that post the other day but had no idea how to
apply it. I will be glad to give it a try with some instructions on what
to do.
On 05/29/2011 03:15 AM, madbiologist wrote:
@Don Myers - does the second patch in comment #33 fix the issue for you?
From the patch comments
I have a similar issue with Ubuntu 11.04 (Natty). The computer has both
a USB mouse and keyboard. Neither are powered down when the computer is
shut down. On a fresh boot, the keyboard and mouse work work fine
though. Also, the usb wireless adapter is not powered down either
On two other
I have the same issue on 1 computer out of 8 that I've upgraded. On two
others, the USB mouse will freeze 20 to 50% of the time on boot.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/784704
Title:
I have the same issues on 1 machine out of 8 upgraded to Natty. No
issues before with this computer with 8.10, 9.04, 9.10, 10.04, and 10.10
installed. 32 bit system, Mouse, keyboard, and usb wireless adapter all
remain powered after shutdown.
--
You received this bug notification because you are
I just installed GThumb from the software center in Natty. Since I
didn't have a working GThumb that served my purposes, I have been using
a windows program called Faststone Image Viewer in Wine relatively
successfully (there are a few quirks). It is very important to me to be
able to sort the
I have the indicator-weather installed on 2 other Ubuntu 11.04 boxes,
and it displays fine. On my main box though, it will not display. I've
tinkered with this ever since the release of 11.04 and can't make it
work. It shows it is installed. I also checked that all of the files
that installed when
I've upgrade 8 computers from Ubuntu 10.10 to 11.04. Two of them have
the issue of the USB mouse being frozen on boot, one 20% of the time,
one 50% of the time. The keyboard works on both, although at least one
is not using a USB keyboard . A restart does not work. A complete
shutdown is
I'm having the exact same issues with Dreamweaver and with Quicken 2009
in Wine. I was extremely frustrated last night trying to use them. Based
on the information above, the programs do seem to work if in a window
and not full screen, but I haven't had time to really research this yet.
--
You
Help please. I'm generally good with figuring out how to make things
work in Ubuntu. I cannot make indicator-weather work in Ubuntu 11.04
Unity. It shows up in the list of apps if you tyupe weather. Clicking on
it doesn't seem to do anything. Right clicking on it doesn't seem to do
anything.
We installed the 2.6.38-rc7 Linux kernel as per the instructions above.
It did fix the shutdown problem. The computer reliably shuts down now
without issue.
On boot though, before the Ubuntu splash screen comes up saying for ata
1 and ata 2: softreset failed - driver not ready. Then it says
the ATI video driver he has installed before I do this.
Thank you.
Don
On 03/07/2011 02:35 PM, Fabio Marconi wrote:
Hello Don Myers
On first, please go to system - Administration - Driver and disable propetary
drivers if installed.
Then click on the following links in this exact order:
http
Thank you again for your assistance. I appreciate you having taken the
time to help.
On 03/08/2011 12:06 PM, Fabio Marconi wrote:
Ok Don Myers
Thanks for the reply
I close this report
Fabio
** Changed in: linux (Ubuntu)
Status: Confirmed = Invalid
Here is the information from uname -a:
fred@fred-NV52-Series:~$ uname -a
Linux fred-NV52-Series 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22
20:25:46 UTC 2011 x86_64 GNU/Linux
On 03/06/2011 05:52 AM, Fabio Marconi wrote:
Hello Don Myers and Scott Macintire
Before i need to know
I recommended to the owner of the computer which would not shut down to
do a BIOS update if one was available. He did, and it is shutting down
normally now! Thank you for your assistance!
On 03/06/2011 05:52 AM, Fabio Marconi wrote:
Hello Don Myers and Scott Macintire
Before i need to know
Hi Fabio,
Thank you for your quick response. The computer belongs to a co-worker
of mine. I will get the information for you as soon as possible.
Don
On 03/06/2011 05:52 AM, Fabio Marconi wrote:
Hello Don Myers and Scott Macintire
Before i need to know the architecture of your machine, so
I'm having the exact same problem too. How do you install the new Linux
kernel mentnioned above?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/654042
Title:
Maverick reboots immediately after
I've installed Ubuntu on about 20 machines, and have never seen or heard
about this until tonight. One person who I did an install for wrote me
and said he couldn't find trash anywhere. I wrote back and sent him a
screen shot of my desktop showing him where it was, and also told him
how to find it
I've installed Ubuntu on 20 machines for individual desktop use. Most
have been on AMD processors, and most of those have been on dual core
and 1 quad core. The single core machines have rarely been used to print
from. I've seen the issue on both dual core and quad core.
I hope this helps.
I've had the issue on both fresh installs and upgrades from 9.10.
On 08/04/2010 04:38 PM, Phil Went wrote:
Fresh and upgrades of 32bit lucid confirmed
I'm going to try and recreate this using a 32bit Ubuntu Server
installation. Can those experiencing the problem confirm that this
occurs on
I've done 20 installs if 10.04, mostly upgrades from 9.10, all 32 bit.
Initially only 2 machines were problem machines. My computer at home and my
co-workers computer at the office. None of the others had this issue for
months. The upgrades were done shortly after 10.04 was released. On the
I never had an issue with there being any difference whether the printers were
on or not on boot. On 1 computer cups would not be started 80% of the time. On
another about 30% of the time. The workaround in:
http://ubuntuforums.org/showpost.php?p=9480172postcount=20
has worked flawlessly for me
I found today that a third computer that I upgraded from 9.10 to 10.04
is also having this same issue.
--
CUPS and other system services not starting at boot
https://bugs.launchpad.net/bugs/554172
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
1 - 100 of 138 matches
Mail list logo
