Adding the obvious: `caja --quit` will make it restart.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1764727
Title:
Possible caja memory leak
To manage notifications about this bug go to:
Just want to note I have a system with caja 1.20.2 where it's using 7.3
GiB after 15 days uptime.
Is there a correct way to restart caja?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1764727
Title:
Yep, trying to curl with SFTP gives:
* Protocol sftp not supported or disabled in libcurl
* Closing connection -1
curl: (1) Protocol sftp not supported or disabled in libcurl
This is STUPID and there's pretty much no excuse...
--
You received this bug notification because you are a member of
(Seriously, it took at least an hour to build itself, though I didn't
wind up with errors because I built it with dpkg-buildpackage)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1197808
Title:
I can confirm this is still happening for me on 64 bit...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/886888
Title:
ushare crashes on start-up when USHARE_ENABLE_DNLA=yes
To manage notifications
(12.04 Precise Pangolin)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/886888
Title:
ushare crashes on start-up when USHARE_ENABLE_DNLA=yes
To manage notifications about this bug go to:
Can confirm this issue on an ASUS Q200E:
From xinput:
⎜ ↳ ETPS/2 Elantech Touchpad id=11 [slave pointer (2)]
In some situations click and drag does not seem possible.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
(Whereas, just copying a file only locks stuff some of the time, and
usually more intermittently.)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/999386
Title:
Disk access locking whole PC
To
http://openbenchmarking.org/result/1205228-BY-FILESYSTE76
No idea if they're reasonable results or not, but they don't seem crazy.
My sytem didn't seem to lock when I ran them, though I was gone for most
of it.
The bug you posted seems to describe similar symptoms.
I think my issues are also
When I try the above it just says 'No additional information collected'
and quits.
Possibly because there hasn't actually been a crash to trigger it?
I'm going to try finding the PTS file systems tests and running them
now.
--
You received this bug notification because you are a member of
Ubuntu is the host, Windows 7 is a virtualized guest.
Using the Phoronix test suite to do FS benchmarks is a good idea, I'll
give that a go when I'm back at work on Monday.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Find right package says I should use 'ubuntu-bug storage' to classify
it, though so far as I can tell that is not actually possible. I also
have no idea what Use Storage Symptom standard reply is.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Public bug reported:
Using a quad core i5 with 8 gigs ram and 2 terabyte HD, cleanly
formatted as ext4 at install.
Commands which alter or move large files lock the whole system such that
web browsers, system monitor, IM, etc. become non-responsive and gray
out.
Typical scenarios:
Create a new
12.04 lts, if it's not clear.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/999386
Title:
Disk access locking whole PC
To manage notifications about this bug go to:
*** This bug is a duplicate of bug 615442 ***
https://bugs.launchpad.net/bugs/615442
** This bug has been marked a duplicate of bug 615442
euca-describe-users fails with ImportError: No module named euca_admin.users
* You can subscribe to bug 615442 by following this link:
*** This bug is a duplicate of bug 615442 ***
https://bugs.launchpad.net/bugs/615442
** This bug has been marked a duplicate of bug 615442
euca-describe-users fails with ImportError: No module named euca_admin.users
* You can subscribe to bug 615442 by following this link:
*** This bug is a duplicate of bug 615442 ***
https://bugs.launchpad.net/bugs/615442
** This bug has been marked a duplicate of bug 615442
euca-describe-users fails with ImportError: No module named euca_admin.users
* You can subscribe to bug 615442 by following this link:
*** This bug is a duplicate of bug 615442 ***
https://bugs.launchpad.net/bugs/615442
** This bug has been marked a duplicate of bug 615442
euca-describe-users fails with ImportError: No module named euca_admin.users
* You can subscribe to bug 615442 by following this link:
I can't actually find euca_admin in any of the eucalyptus packages...
not sure if I'm a complete idiot or if it's just not there.
In any case, there seem to be bug reports scattered around that are all
variations on failing to access/import something from euca_admin.
--
You received this bug
*** This bug is a duplicate of bug 615442 ***
https://bugs.launchpad.net/bugs/615442
** This bug has been marked a duplicate of bug 615442
euca-describe-users fails with ImportError: No module named euca_admin.users
* You can subscribe to bug 615442 by following this link:
*** This bug is a duplicate of bug 615442 ***
https://bugs.launchpad.net/bugs/615442
** This bug has been marked a duplicate of bug 615442
euca-describe-users fails with ImportError: No module named euca_admin.users
* You can subscribe to bug 615442 by following this link:
*** This bug is a duplicate of bug 615442 ***
https://bugs.launchpad.net/bugs/615442
** This bug has been marked a duplicate of bug 615442
euca-describe-users fails with ImportError: No module named euca_admin.users
* You can subscribe to bug 615442 by following this link:
*** This bug is a duplicate of bug 615442 ***
https://bugs.launchpad.net/bugs/615442
** This bug has been marked a duplicate of bug 615442
euca-describe-users fails with ImportError: No module named euca_admin.users
* You can subscribe to bug 615442 by following this link:
*** This bug is a duplicate of bug 615442 ***
https://bugs.launchpad.net/bugs/615442
** This bug has been marked a duplicate of bug 615442
euca-describe-users fails with ImportError: No module named euca_admin.users
* You can subscribe to bug 615442 by following this link:
I can't actually find euca_admin in any of the eucalyptus packages...
not sure if I'm a complete idiot or if it's just not there.
In any case, there seem to be bug reports scattered around that are all
variations on failing to access/import something from euca_admin.
--
You received this bug
Public bug reported:
Binary package hint: transmission
Open bit torrent.com suggests using
udp://tracker.openbittorrent.com:80/announce as its tracker address.
However, the 'tracker announce urls' dialog from the 'trackers' tab in
'properties' item for a torrent only allows http addresses, not
Public bug reported:
Binary package hint: evince
In the attached document, the = symbol renders as a mark for some reason.
Will also attach pictures for reference.
Using:
Description:Ubuntu 10.04.1 LTS
Release:10.04
** Affects: evince (Ubuntu)
Importance: Undecided
** Attachment added: PDF with rendering error.
https://bugs.launchpad.net/bugs/662492/+attachment/1699127/+files/473hw3.pdf
--
error on pdf render -- instead of = symbol
https://bugs.launchpad.net/bugs/662492
You received this bug notification because you are a member of Ubuntu
Bugs, which
Reference of correct render using Adobe Acrobat reader Linux.
** Attachment added: reference render with Adobe
https://bugs.launchpad.net/ubuntu/+source/evince/+bug/662492/+attachment/1699128/+files/adobe_render.png
--
error on pdf render -- instead of = symbol
Screen of document rendered with error.
** Attachment added: reference render with evince (shows error)
https://bugs.launchpad.net/ubuntu/+source/evince/+bug/662492/+attachment/1699129/+files/evince_render.png
--
error on pdf render -- instead of = symbol
I've encountered this bug live booting a 9.10 live usb.
I have nvidia graphics, but they're running on the 'open' driver off the live
usb.
I do not have ECC memory, and if my bios allows it to be enabled it's
hidden somewhere in the depths of menus I don't understand.
Run an AMD X2 system.
The
(Oh, and I'm on 64 bit.)
--
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT
be loaded.
https://bugs.launchpad.net/bugs/422536
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
Public bug reported:
Binary package hint: tomboy
pretty much all the gnome-panel icons have been updated to a black/white
netbook remix style except for tomboy
ProblemType: Bug
Architecture: i386
CheckboxSubmission: 043b2b43020f2a1021a3391cb56db1ef
CheckboxSystem:
** Attachment added: see yellow icon in upper right
http://launchpadlibrarian.net/33392807/Screenshot.png
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/33392808/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/33392809/ProcMaps.txt
Public bug reported:
previously edge scrolling on my netbook worked on both the right edge
(up/down) and bottom edge(left/right). However, with the 9.10 netbook
version, only up/down touchpad scrolling works, not right/left.
I don't know what OS component is responsible for this (xinput, device
/controlC0: slogger1236 F pulseaudio
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0x5854 irq 16'
Mixer name : 'Realtek ALC268'
Components : 'HDA:10ec0268,1025015b,00100101'
Controls : 9
Simple ctrls : 6
CheckboxCommand: alsa_record_playback
CheckboxTest
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/33285143/AlsaDevices.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/33285144/BootDmesg.txt
** Attachment added: Card0.Amixer.values.txt
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/33285302/AlsaDevices.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/33285303/BootDmesg.txt
** Attachment added: Card0.Amixer.values.txt
: subdevice #0
Architecture: i386
ArecordDevices:
List of CAPTURE Hardware Devices
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: slogger1236
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/33315634/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/33315635/CurrentDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/33315637/Dependencies.txt
**
Public bug reported:
Binary package hint: netbook-launcher
alt-tab doesn't include returning to the launcher/desktop as an item.
It's an annoying UI quirk as it's common to wish to switch from a running app
to the launcher.
ProblemType: Bug
Architecture: i386
CheckboxSubmission:
Public bug reported:
Binary package hint: netbook-launcher
Items in the files and folders tab can't be pinned/stickied favorites.
Should be possible.
ProblemType: Bug
Architecture: i386
CheckboxSubmission: 043b2b43020f2a1021a3391cb56db1ef
CheckboxSystem: c69722ecac764861be52925fa50b4dcc
Date:
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/33315809/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/33315814/CurrentDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/33315815/Dependencies.txt
**
Public bug reported:
Binary package hint: gnome-control-center
On a netbook rotating the screen leaves touchpad orientation intact.
This means that when you hold your computer like a book, up goes to the
right, and right goes down. It's really irritating. While I understand
that swapping axis is
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/33316014/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/33316015/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/33316018/ProcStatus.txt
** Attachment
I have this issue with the touchpad on my netbook.
I really wish touchpad orientation would rotate with the screen. Make
e-book reading so much nicer.
--
Rotate Screen in TabletPC stylus and pointer mouse not coincidence
https://bugs.launchpad.net/bugs/217182
You received this bug notification
Public bug reported:
When setting up software RAID with the ubuntu 8.10 installer, no option
is given for chunk size and when building a RAID 5 array, defaults to 64
kilobyte. A much better default choice would be 256k or 512k. There
should either be an option for chunk size in the installer, or
of the issue now.
Apologies.
slogger
--
Sometime a small square in lower middle of screen is scrammbled for about 20
secs
https://bugs.launchpad.net/bugs/273831
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
No longer using ubuntu, but on fedora this issue was fixed by
blacklisting a module.
--
wireless tends to connect at 1Mb/s instead of normal rates
https://bugs.launchpad.net/bugs/274682
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Also, I no longer am using ubuntu on my acer aspire one, but based on
the ubuntu wiki for it, I am guessing maybe this is the result of not
having had scrollkeeper disabled.
--
updating near freezes system in extremely nonlinear way
https://bugs.launchpad.net/bugs/273829
You received this bug
I am having this issue on intrepid alpha. It seems to be why wireless is
erratic. Often times connection speed of 1-6 Mb/s and much slower
performance. Should be connecting at much higher speeds.
--
Wifi working but at 1Mb/s
https://bugs.launchpad.net/bugs/201225
You received this bug
Public bug reported:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/201225
Re-report of this bug as per request. It seems to be possibly why I've
had such erratic behaviour from the ath5k kernel driver, as noted here:
https://bugs.launchpad.net/ubuntu/+source/jockey/+bug/273825 (Note that
Public bug reported:
Binary package hint: gnome-power-manager
Came across this trying to identify a massive apt slowdown and thought I'd
report it.
Gnome-power-manager seems to show up frequently using about 3% CPU. It also
loads nearly 8 seconds after all other panel applets, occasionally
I've been monitoring top during the update process and have noticed a few
things.
frequent CPU users are:
synaptic
xorg
dpkg
apt-check
gconftool-2
There are usually two processes for synaptic, they both seem to spend most of
their time waiting or idle, but sometimes spike.
Gconftool-2, when
(The temp freeze of top at the relevant time is why I haven't bothered
with a screen shot.)
--
updating near freezes system in extremely nonlinear way
https://bugs.launchpad.net/bugs/273829
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I just ran into this bug on intrepid alpha 6.
Funny thing is that gltron was working properly and now all of a sudden keys
don't work, go to change keys, quits on trying to configure keys.
Quits a few times trying to configure keys, then works again only keys have now
been reset to defaults.
yeah, saw the error message come up, but x session kept going.
--
Xorg crashed with SIGSEGV in DRILock()
https://bugs.launchpad.net/bugs/264227
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
So the live CD detects Atheros wireless from Ath5k driver fine, can see
networks though none of them were open for me to connect to. So on live cd
wireless is okay but:
T
he default install adds on something in jockey-gtk (hardware driver manager)
that is called
Public bug reported:
Not sure what to make of this, but the process when installing updates
is very slow. Very long period of lowest level CPU use and nothing
happening interspersed with huge spikes in CPU. What's wors is the apps
every other application freezes intermittently when a package
Public bug reported:
I have some screenshots.
Basically a few times a rectangle in the lower middle of the screen gets
scrammbled/frozen and doesn't update for maybe 20 secs. Everything
everywhere else on the screen is fine, and it does go away. Well
present, that part of the screen is stuck on
** Attachment added: Several pictures of different occurances of this issue.
http://launchpadlibrarian.net/17899024/screenBlips.tar.gz
--
Sometime a small square in lower middle of screen is scrammbled for about 20
secs
https://bugs.launchpad.net/bugs/273831
You received this bug
Public bug reported:
Binary package hint: v86d
Sep 23 19:47:21 ** kernel: [3.768056] uvesafb: failed to execute
/sbin/v86d
Sep 23 19:47:21 ** kernel: [3.768067] uvesafb: make sure that the v86d
helper is installed and executable
Sep 23 19:47:21 ** kernel: [3.768074]
so I'm back on ubuntu alpha, this time from live CD image via USB key and the
issue is gone.
I think it's because on the alternate install image I chose USA ACER
Eurosign 5 (€) whereas with the live cd image I just chose USA Eurosign 5 (€)
leaving me to believe that even though I have an
Public bug reported:
using xubuntu ibex alpha 6 on an acer aspire one laptop/nettop.
Previously, in Ubuntu 8.04, taping a finger on the touchpad functioned
easily and intuitively as a click. Now it usually does not register.
This is a major annoyance and possibly a problem with the touchpad
Public bug reported:
Acer aspire one with xubuntu alpha 6 from alternate install cd running.
Keyboard layout has slight fn-key issues.
fn-[volume++] fn-[volume--] and fn-[toggle mute], ie:
fn-upArrow, fn-downArrow fn-f8
do not function to control audio volume
All other keys appear to work
I'm of the camp that asks if Mozilla can force ubuntu do display and
EULA, then pretty soon every too big for its britches free software
project is going to try and make you click past a stupid EULA screen
when you launch. There goes one of the prime reasons to use linux/ubuntu
over other non-free
I've just determined that this problem only occurs when I have the
external USB 2.0 hard drive plugged in. If I turn off the external
drive, it loads the partitioner no problem.
As previously noted, the external is partitioned accordingly:
external HD:
/dev/sdf5 vfat (/media/VAULT_VI)
/dev/sdf1
Oh, and just for reference,
I have an ASUS M2N-MX SE Plus mobo
AMD X2 BE 2.1 ghz CPU.
1 gig ddr2 800
SATA DVD Burner
SATA 250 GB internal HD
External USB 250 GB HD
nVidia 8600 gt 256 mb
partitioning is as follows:
Internal HD:
/dev/sda5 ext3 (root)
/dev/sda7 ext3 (/home)
/dev/sda8 ext3
Public bug reported:
Hardy Heron release candidate installer partitioning broken.
may be a duplicate of
https://bugs.launchpad.net/ubuntu/+source/gparted/+bug/191577
Running the installer permanently hangs while trying to load the partitioning
step of install.
However, the
*** This bug is a duplicate of bug 108159 ***
https://bugs.launchpad.net/bugs/108159
Thanks for info all. I have it working now.
--
Reading some eps files causes system slowdown
https://bugs.launchpad.net/bugs/117635
You received this bug notification because you are a member of Ubuntu
*** This bug is a duplicate of bug 108159 ***
https://bugs.launchpad.net/bugs/108159
Public bug reported:
https://bugs.launchpad.net/bugs/117635 seems like a similar bug for
kubuntu.
Once again, navigating a directory with *.eps files with preview active causes
massive system slowdown and
*** This bug is a duplicate of bug 108159 ***
https://bugs.launchpad.net/bugs/108159
Similar:
https://bugs.launchpad.net/ubuntu/+source/ghostscript/+bug/121278
https://bugs.launchpad.net/ubuntu/+source/ghostscript/+bug/117635
** This bug has been marked a duplicate of bug 108159
[GPL GS
*** This bug is a duplicate of bug 108159 ***
https://bugs.launchpad.net/bugs/108159
I think I am experiencing the same bug in Ubuntu. How do you change gs
to gs-gpl?
https://bugs.launchpad.net/ubuntu/+source/ghostscript/+bug/121278
Public bug reported:
duplicate of
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/105234 I am
pretty sure.
Connected, but network manager applet says I'm not. That's about it. I think
it's because it defaults to having wireless enabled but can't tell the
difference between
Public bug reported:
Latest updates on my system produced some kind of DRI/3-D problem.
I use open source ati driver, and all of a sudden things have stopped
working. Happened with latest updates. Been updating feisty since
beginning of beta.
glxgears LOOKS really choppy, but reports FPS of
** Attachment added: xorg.conf
http://librarian.launchpad.net/7138578/xorg.conf
--
latest feisty updates seem to ruin 3-D/DRI support on ATI open driver
https://bugs.launchpad.net/bugs/102816
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact
Seems to have gone away after rebooting twice.
** Changed in: Ubuntu
Status: Unconfirmed = Rejected
--
latest feisty updates seem to ruin 3-D/DRI support on ATI open driver
https://bugs.launchpad.net/bugs/102816
You received this bug notification because you are a member of Ubuntu
Bugs,
Like I said, I don't think it's big deal, but a surprising number of pdf
documents do something similar. As an example:
http://www.amd.com/us-
en/assets/content_type/DownloadableAssets/AMD_ATI_Fact_Sheet.pdf
http://www.ubuntulive.com/ubuntu/prospectus.pdf
I think maybe they don't have an
My version of Evince is now showing the whole title instead of having
... appended to it everywhere except on the window list.
--
labels PDF document a microsoft word document
https://bugs.launchpad.net/bugs/98876
You received this bug notification because you are a member of Ubuntu
Bugs, which
Public bug reported:
Binary package hint: evince
This isn't a major bug, but when a PDF is open, the top window says
Microsoft Word - DocName.doc (DocName.pdf) which probably confuses
people, considering that only the beginning is generally visible. Should
probably say DocName.pdf or something.
** Attachment added: Dependencies.txt
http://librarian.launchpad.net/7053370/Dependencies.txt
** Attachment added: ProcMaps.txt
http://librarian.launchpad.net/7053371/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://librarian.launchpad.net/7053372/ProcStatus.txt
--
labels PDF
https://launchpad.net/ubuntu/+source/erlang/+bug/62145
I think this is duplicate bug.
--
erlang-base keeps wings3d from starting
https://launchpad.net/bugs/83181
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I've not found a mobile X700 that doesn't need a workaround, put I've
only ever dealt with 2 of them.
--
[x700] fails to infer lvds for primary connector on acer ferrari 4005 | card
detected, but driver fails to use right output port
https://launchpad.net/bugs/22985
--
ubuntu-bugs mailing
This problem is persisting under the feisty live CD even though there
seems to be a simple workaround.
--
[x700] fails to infer lvds for primary connector on acer ferrari 4005 | card
detected, but driver fails to use right output port
https://launchpad.net/bugs/22985
--
ubuntu-bugs mailing
I get this error also. :(
** Attachment added: problem report
http://librarian.launchpad.net/5779563/_usr_lib_erlang_erts-5.5.1_bin_beam.1000.crash
--
Segfault when Startings Wings3d
https://launchpad.net/bugs/62145
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
stated fix works perfectly and takes 2 seconds, tho :)
--
Segfault when Startings Wings3d
https://launchpad.net/bugs/62145
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
*** This bug is a duplicate of bug 63558 ***
just wanted to note at this late date that removing quiet splash seemed
to get rid of this for me.
--
Consoles locked out and screen show complete garbage.
https://launchpad.net/bugs/70581
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Hey, I don't know what's been going on with this bug, I haven't been
paying attention 'cause of school (finals and all, then christmas), but
I just wanted to note that it disappears, or seems to, after most
volumes have been indexed, and that its severity seems to be in
proportion to the number of
It might be...
On my machine removing usplash let me get to the consoles, but it still doesn't
transfer back to the x-session correctly.
(I have to relaunch x on returning to the x session window because it only
shows my mouse.)
--
Consoles locked out and screen show complete garbage.
Public bug reported:
http://ubuntuforums.org/showthread.php?t=293789
for screenshots and explanation.
Basically, trying to go to the console from an x-session causes
gibberish to cover the screen until I switch back to the x-session,
which then fails to display and must be restarted.
Showed up
I can't find one, so I'll just make one.
http://ubuntuforums.org/showthread.php?t=293789
https://launchpad.net/distros/ubuntu/+bug/70581
If anyone is having the same problem.
--
[x700] fails to infer lvds for primary connector on acer ferrari 4005 | card
detected, but driver fails to use
*** This bug is a duplicate of bug 37678 ***
I don't see how is this is a duplicate bug, as
https://launchpad.net/bugs/37678
reports on a bug that seems related to the system starting and X hanging. Here,
the system runs perfectly fine, it's just that accessing the consoles doesn't
work.
--
*** This bug is a duplicate of bug 37678 ***
Also, the prescribed workaround of editing out DRI doesn't change the
fact that the ctr-alt-f[1-6] consoles are gibberish. It seemed to make
it so the I didn't have to relaunch X on trying to return from a
gibberish console, but the console was still
Yeah, my system is working after a ton fixing the automatic update, and
the bugs with the live CD seem to be just another example of 2 or 3
already known bugs, so I'll be ignoring it for now.
--
xorg automatic configuration on edgy 6.10 live CD- branch for x-series ATI cards
The process beagled-helper ID 5969 on my system runs fine for the
first few minutes after booting into desktop, but all of a sudden it
will suddenly start eating up all my memory, going from something like
8-14 megs to being with to taking up ALL of my system's RAM, like 1000+
megs...
Related?
Public bug reported:
I just upgraded from dapper to edgy, finally fixed all the problems that
seemed to cause.
New problem now:
Process
beagled-helper
ID
5969
runs fine for a few minutes after login, and then out of the blue starts
eating all my system memory to the point that all my memory
** Attachment added: screen of process manager with beagled-helper taking up
RAM
http://librarian.launchpad.net/4967040/Screenshot-1.png
--
process beagled-helper eats up all RAM in under a minute.
https://launchpad.net/bugs/70426
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
next time I reboot, I'll add the missing ID.
--
process beagled-helper eats up all RAM in under a minute.
https://launchpad.net/bugs/70426
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
(process of building RAM begins again because as long as process
beagled is running, beagled-helper gets restarted.
--
process beagled-helper eats up all RAM in under a minute.
https://launchpad.net/bugs/70426
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://launchpad.net/distros/ubuntu/+source/beagle/+bug/70426
I have the same problem on a system I upgraded to edgy from dapper.
I have a turion 64, but it is the 32-bit Ubuntu.
Filed I different bug report because I hadn't seen this one.
--
beagled-helper and beagle run away with CPU and
1 - 100 of 133 matches
Mail list logo
