With the nouveau driver, it still crashes. I can see the kernel messages
again.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1341194
Title:
[Dell Inc. Latitude E6500] suspend/resume failure
Hi penalvch,
thanks for your advise. I upgraded to the latest bios but it still crashes on
resume from S3. With the old bios, I could see kernel messages. With the new
bios, I'm only getting a black screen (backlight on). I can't ping the machine
in this state.
Output of dmidecode -s
Public bug reported:
resumed from S3, got kernel messages instead auf gui.
ProblemType: KernelOops
DistroRelease: Ubuntu 14.10
Package: linux-image-3.16.0-3-generic 3.16.0-3.8
ProcVersionSignature: Ubuntu 3.16.0-3.8-generic 3.16.0-rc4
Uname: Linux 3.16.0-3-generic x86_64
NonfreeKernelModules:
play -n works fine for generating tones, but it is not interactive so I
can't adjust the frequency on the fly.
The keyword aoss mentioned above lead to the following workaround:
sudo aptitude install alsa-oss
aoss siggen
--
You received this bug notification because you are a member of Ubuntu
Since I removed my radeon hd8750 on 12 February. , it runs stable.
Graphic is done by I7 now
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/889706
Title:
Gnome-shell randomly crashes
To manage
@Hugo Zyzz: Uups. typo. The correct and full name of the card is 1024MB
Sapphire Radeon HD 6850 Aktiv PCIe 2.1.
Btw.: My brother installed Mint 12 on a P4 with an older graphic adapter
(Geforce 2 or something like that) and he reported freezes,
dissappearing window decoration and crashes too. But
@fig-wright:
I use unstable packages romeo since I installed the system but it does not
seem to make any difference in this matter.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/889706
Title:
@Wei En:
I'm not sure about this, but I used Ubuntu with Unity for a few hours
and I experienced similar crashes... however I did not look into
details, so I may be wrong.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Feb 7 20:28:17 k1 kernel: [ 6480.960135] cinnamon[1796]: segfault at
2c5855008 ip 7f1a8d1a10a8 sp 7fffbf0e3af0 error 4 in
libglib-2.0.so.0.3000.0[7f1a8d141000+f4000]
Feb 7 22:00:59 k1 kernel: [12026.907493] cinnamon[2980]: segfault at
28eadc008 ip 7f15d06710a8 sp 76c76ef0
Hm. I uninstalled Pidgin and Banshee. It is still not stable, but it is
far better than before. I only had two segfaults since I stopped using
Pidgin and Banshee.
But a few times, alt+tab did not work any more and it didn't react to
mouse. Keyboard still worked in parts, for example alt+f4 and
Hi!
I'm still experiencing this bug.
I clicked between some folder windows and then all dissapperared for a few
seconds, after that windows reappeard.
Feb 4 11:47:38 k1 kernel: [ 3156.987271] cinnamon[1753]: segfault at 831f17f08
ip 7f8fd78bc5ec sp 7fff966f4fc0 error 6 in
And again
This time it didn't respawn, but left me with an unusable desktop without
window decorations and without the possibility of switching windows I had
to press ctrl+alt+backspace and login again. Lost my written text of course.
Btw: I also use pidgin... will try without it now.
Ok... happens for me without pidgin running or even without having it
installed.
Feb 4 21:26:57 k1 kernel: [15554.787736] cinnamon[1815] general protection
ip:7f800e1d10a8 sp:7fff71de4bb0 error:0 in
libglib-2.0.so.0.3000.0[7f800e171000+f4000]
Feb 4 21:26:57 k1 gnome-session[1592]: WARNING:
My Radeon HD 6850 caused trouble with suspend to ram and crashed the system 1-2
times a week with [fglrx] asic hang happened in syslog, no matter which
driver and kernel I was using.
So I was fed up with ATI/AMD-Cards und removed it. Since then, with the i7
integrated graphics, there were no
I'm testing cinnamon and cinnamon-session with Linux Mint, and there is
the same effect: After I clicked on a window to activate it, the desktop
did not respond and respawned some seconds later. I had this with gnome-
shell (as posted earlier). So this probably isn't a bug in gnome-shell?
Or, as
I think it was worse with my fresh installation around 23 December.
Maybe it has something do do with timings, because I'm using a ssd which
slowed down a little bit since I started using it on 23 December. Just a
feeling
I ran a memtest for about 48h with no errors.
However, at least it
Happend with my old intel core 2 duo and now with my new I7, usually when
watching youtube videos.
I use an ATI Radeon HD 6800 Series.
Dec 31 19:47:49 k1 kernel: [ 1704.199736] INFO: rcu_sched_state detected stall
on CPU 1 (t=15001 jiffies)
Dec 31 19:49:49 k1 kernel: [ 1823.857583] [fglrx] ASIC
Same problem here. Fresh install of Linux Mint 12 x64.
After boot, when I hit enter key for the first time, screen goes blank
and I'm logged out. This happens when hitting enter after the password,
or, if automatic login is enabled, in gedit (boot, start gedit, type
foo, hit enter = logoff). Or:
I can confirm this. As soon as qjackctl is started, no sound output on
alsa devices is possible, even if the jack daemon is not started by
qjackctl.
I have two soundcards (one dedicated to jackd and the second for normal
system sounds) and qjackctl blocks both cards, even if I configure
qjackctl
Hi Ibán,
I think you fixed both bugs.
I tested version 0.9.0 with both ALSA and Jackd, and it worked without any
problem.
Thanks for your work on this great program!
kede
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https
Public bug reported:
Binary package hint: lingot
Ubuntu 10.10 x64:
1.)
When I open Lingot and click on Bearbeiten (edit), Einstellungen (settings),
set audio to ALSA and Audio dev to hw:1 and click on Anwenden (Apply), it works
so I can use the lingot.
But if I click on OK to close the
** Attachment added: lingotcrashafterjackdstart.text
https://bugs.launchpad.net/bugs/678115/+attachment/1740262/+files/lingotcrashafterjackdstart.text
--
Lingot crashes when changing audio-settings or when connecting to jackd
https://bugs.launchpad.net/bugs/678115
You received this bug
I found the following bug reports which describe the problem since Ubuntu 8.04:
https://bugs.launchpad.net/ubuntu/+source/lingot/+bug/242274
--
Lingot crashes when changing audio-settings or when connecting to jackd
https://bugs.launchpad.net/bugs/678115
You received this bug notification
Happens in Ubuntu 10.10.
--
Options - change a value - Apply and Lingot Crashes
https://bugs.launchpad.net/bugs/242274
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Same problem here. Padevchooser and dependencies are installed.
No volume control available, totem freezes when trying to change volume.
Sometimes the hole desktop freezes, SSHing from another system and killing
totem helps.
--
pavucontrol can't get connection
I fixed it by editing /etc/pulse/daemon.conf
default-sample-rate = 48000
--
Samsung X05: Audio Output via optical spdif distorted, no sound from command
beep
https://bugs.launchpad.net/bugs/460609
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I have the following, which might be related to the same thing, although
it's a different problem:
I have 3 additional partitions which are mounted using fstab on boot.
When a fsck runs on one of those partitions, gdm starts while fsck is still
running. The partitions are not mounted then.
Mount
I have the same problem, but I have only one soundcard: Soundblaster
Audigy ZS 2.
When I start qjackctl (without starting jackd yet!) there is no more
sound from applications like totem or system sounds. Totem just stops at
the current position.
When I left-click the speaker Icon in the upper
I tried the following:
-Start Mp3 playback with totem
-run jackd -dalsa -dhw:0 -r44100 -p128 -n2 -m -H -M
Result:
the capture device hw:0 is already in use. Please stop the application
using it and run JACK again
cannot load driver module alsa
- Klicked on the speaker icon and changed
I have the same Problem.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/331699
I found the following workaround:
- Install ethtool
- Create /etc/pm/sleep.d/99realtek:
#!/bin/sh
ethtool -s eth0 speed 1000
This sets speed to 1000Mbit on resume.
--
Gigabit network speed lost after
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/34367134/Dependencies.txt
** Attachment added: XsessionErrors.txt
http://launchpadlibrarian.net/34367135/XsessionErrors.txt
--
Samsung X05: Audio Output via optical spdif distorted, no sound from command
beep
Public bug reported:
When I use the optical spdif out connector, the sound coming out of it is
distorted.
It sounds a little bit like through a telephone connection or a bad recording
with a low bitrate / sampling rate or as if only peaks come through.
The output from the internal speakers of
I experienced a similar problem with Ubuntu (Desktop) 9.04 and 9.10 (beta) a
few times.
The system has 4GB physical memory and 3,9GB swap-space.
1.) I copied some large files (maybe 20GB each) by gigabit network. After some
time, the transfer rate went to near zero, hdd-led stays on with a
Still happens with Ubuntu 9.10.
I tried the workaround but it caused more trouble:
Speed was 1000Mbit now, but network manager shows it is not connected. After
running dhclient it works again.
--
Realtek RTL8111/8169 LAN (r8169) falls back from Gigabit to 100Mb/s after
waking up from
I tried Ubuntu 9.10 on Acer Travelmate 4001lmi (Bios 3A10).
Standby:
- drive spins down
- power led stays on
- wlan led off
- screen corrupted, backlight on
Shutdown:
- drive spins down
- power led stays on
- wlan led off
- screen blanked, backlight on
--
Acer TravelMate 4002WLMi does not
3A10 is the latest version for my laptop:
http://support.acer-euro.com/drivers/notebook/tm_4000.html
However, I upgraded the bios about two years ago to this version.
--
Acer TravelMate 4002WLMi does not power off completely, or resume from
hibernate or suspend
After the problem occured to my machine, I installed the ubuntu-package of the
vanilla-kernel
(see https://wiki.ubuntu.com/KernelMainlineBuilds)
It was Kernel v2.6.29.
After a few weeks, it worked with the ubuntu kernel, too strange.
Maybe workaround (or even solution) is to install a
For me it works again with the ubuntu default kernel 2.6.28-11-generic.
I changed nothing, just did an upgrade.
The disks are available with /dev/md0 and /dev/md1.
--
no block devices found after an upgrade from 8.10 to 9.04 on a soft RAID1 system
https://bugs.launchpad.net/bugs/358054
You
Is it really the right way to workaround this bug with quirks?
As far as I understand, a quirk changes the default behavior for a
specific combination of hardware so that such notebook-models use a
certain agp-mode by default.
For my acer this is AGP1x, other modes result in freezes or corrupted
I confirm this.
Mainboard is Gigabyte GA-P35-DS4, Raid disabled, ahci enabled.
2 Sata Drives:
Boot paritition raid 1 (md0)
Root partition raid 0 (md1)
I ran jaunty for some weeks. After yesterday's update, it drops to busybox
because /dev/md1 can't be found.
In /dev there are no devices. No
I have the same problem.
Printers:
- HP Laserjet 1200 CUPS+Gutenprint v5.2.3 attached by usb
- Epson Stylus Color 760 CUPS+Gutenprint v5.2.3 attached by usb
- Brother HL-5140 Foomatic/hl1250 attached by lpr (network)
This was on intrepit and now jaunty. The server has 1,2GB Ram and 1.4Ghz.
hm... normal documents (odt, text, etc) print instantly (2 seconds).
The cups test page starts after 8 seconds and the job has a size of 17k.
I noticed that printing a 7,5MB PDF (10 pages with scannend pages, no color)
generates a 53MB job which of course takes time to process. This might be a
also affects 2.6.28-11-generic (jaunty)
--
Realtek RTL8111/8169 LAN (r8169) falls back from Gigabit to 100Mb/s after
waking up from Suspend(S3)
https://bugs.launchpad.net/bugs/331699
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
mii-tool -vv eth0
Using SIOCGMIIPHY=0x8947
eth0: negotiated 100baseTx-FD flow-control, link ok
registers for MII PHY 32:
1000 796d 001c c912 0de1 c5e1 000f 2001
c5e1 1007 f880 3000
0060 6c40 6c42 1060 c009 2108
2740 8c00 0040 0162 846c 8000 0123
I confirm this on Mainboard Gigabyte GA-P35-DS4 with r8169.
After resume from S3 speed is 100Mbit/s.
r...@k1:/home/kede# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half
sorry... it didn't copy to the clipboard...
After setting it back to Gigabit:
Using SIOCGMIIPHY=0x8947
eth0: negotiated 1000baseT-FD flow-control, link ok
registers for MII PHY 32:
1000 796d 001c c912 0de1 c5e1 000d 2001
4a2d 0300 3800 1007 f880 3000
0060 acc0
It seems problem 1 has been fixed in alpha 3 of ubuntu 9.04.
The thirt problem persists. When resuming from S3, the leds go to on
and the drive spins up. There is no background light, the screen stays
black and the leds at the network connector stay dark.
--
Acer TravelMate 4002WLMi does not
confirmed, rootfstype=ext4 works.
--
initramfs fails to mount ext4 root partition or provide user intervention (even
when ext4 module is available in the image)
https://bugs.launchpad.net/bugs/309762
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
I confirm this for intrepid.
After playing a ac3 video using vlc spdif seams to be switched off.
--
SPDIF won't play PCM after playing AC3
https://bugs.launchpad.net/bugs/25632
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
I confirm this problem. For about two weeks I was unable to login. I
don't know if I did any changes to the system.
- Local login always displayed the login-promt again
- ssh closed connection
- authentication for root-permissions within gdm was not possible, it reacted
as if the cancel-button
With my machine (GA-P35-DS4) it beeps sometimes and shows a black screen.
Then there is a constant beep-sound which only stops by executing the beep
command after boot.
I tried with and without the quiet option. It does not occur if usplash
is disabled.
--
loud beep when starting intrepid on
Hi Bryce, thank you for your help!
I just stumbled across this one:
https://bugs.edge.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/220345
So I removed the Option AGPMode 1, plugged in a mouse with usb and
restarted. I seems not to crash anymore!
But 3d performance is very bad. I
.
After logging in, ich did dpkg-reconfigure xserver-xorg to create a xorg.conf
file (the original one was emty).
I added Option AGPMode 1 to the device session and now it works.
kede
--
x-server freezes after startup (mobility radeon 9700) [Needs AGPMode 1]
https://bugs.launchpad.net/bugs/203007
Hi Bryce, thank you for your fast response!
With Windows XP, it runs perfectly with AGP 4x and even fastwrite so I'm
not sure a quirk would be a final solution.
I already reported this problem (for hardy and intrepid) here and attached the
output of lspci.
During boot, I it beeped and I got the following message:
Program usplash tried to access /dev/mem between 0-e0
--
loud beep when starting intrepid on a dell lattitude/inspiron
https://bugs.launchpad.net/bugs/253399
You received this bug notification because you are a member of Ubuntu
Bugs,
kern.log:Oct 16 18:25:41 k1 kernel: [5.748085] Program usplash tried to
access /dev/mem between 0-e0.
kern.log.0:Oct 12 17:32:48 k1 kernel: [ 2379.909335] usplash[9553] general
protection rip:7ff0a32141bb rsp:7fffab698d70 error:0
kern.log.0:Oct 12 23:50:14 k1 kernel: [5.805475]
Same with Knoppix 5.3 (didn't test current 5.3.1)
--
[Hardy Beta] x-server freezes after startup (mobility radeon 9700)
https://bugs.launchpad.net/bugs/203007
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I just upgraded from hardy to intrepid and there are beeps during boot when
usplash is enabled.
Mainboard is Gigabyte GA-P35-DS4.
This did not happen with Hardy.
** Attachment added: lspci-vvnn.txt
http://launchpadlibrarian.net/18474076/lspci-vvnn.txt
--
loud beep when starting intrepid on
Hi,
a temporary solution for my problem is to force AGP 1x mode because that
prevents it from freezing.
With Windows XP, it runs fine on AGP 4x even with fastwrite enabled.
I discribed it here:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/195051
Output of lspci -vvnn:
Here is the my Xorg.0.log.
I removed the AGP 1x Option and it crashed again with the following:
1.) Xorg has 99% load, cursor is slow and it does not accept inputs or
SysRQ-Keys.
2.) LCD goes black while backlight remains aon
3.) LCD is switched of, picture slowly turns to white (tn-panel).
Besides, I hat the same problem with suse and i read many threads where
people have similar problems.
--
[Hardy Beta] x-server freezes after startup (mobility radeon 9700)
https://bugs.launchpad.net/bugs/203007
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Thank you very much!
I happened to install Windows XP and used this opportunity to check the graphic
card with the tool powerstrip.
Here are the readings:
** Attachment added: Output of Powerstrip with Windows XP.txt
Model: Acer Travelmate 4001lmi.
Replaced Parts: Removed one 256MB Ram Module and inserted a 1GB one (1GB +
256MB).
Flashed Bios some years ago.
Information from Bios Setup:
System Bios Version: 3A10, Build Time: 10/12/04 22:25:09
VGA Bios Version: ATI M11-008.018M.017.001
I confirm this with alpha 4 on acer travelmate 4001 lmi with ati mobility
radeon 9700/64MB.
(duplicate bar, red screen with white blocks on it)
--
[Intrepid] Usplash Screen Corruption
https://bugs.launchpad.net/bugs/243682
You received this bug notification because you are a member of Ubuntu
I'm not sure if this is the same problem...
I tried Intrepid Alpha 4 but I'm still unable to use the desktop installation
cd. I tried several times.
- System freezes a few seconds after x starts.
- System freezes a few seconds after x starts but I can move the mouse-cursor.
- System freezes a
I pressed the power button before.
** Attachment added: picture2: restarting after freeze
http://launchpadlibrarian.net/16860298/picture2.jpg
--
X freezes in drmCommandWrite() when Compiz is enabled on ATI Radeon Mobility
9600
https://bugs.launchpad.net/bugs/195051
You received this bug
I experienced the same problem with Fedora 9. Freezes after login or
screen turns black. Fan sometimes keeps on spinning.
--
glxinfo crashes after login ( systemfreeze )
https://bugs.launchpad.net/bugs/195721
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I may have the same problem with acer travelmate 4001lmi (mobile radeon 9700 /
64mb).
I disabled compiz, but as soon as a access the screensaver applet or any other
3d apliccation (glxinfo, glxgears...) the system freezes.
This started during 08.04 alpha (even the live / install-cd was
I again tried different drivers with options I took from the driver's
documentation but I could not work out how to get around this bug.
As long as I do not use any 3d, the system is stable.
But if I do not touch the notebook for a few minutes, the screen slowly fades
out and the system
Problem returned some weeks ago after updating.
--
[Hardy Beta] x-server freezes after startup (mobility radeon 9700)
https://bugs.launchpad.net/bugs/203007
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I think I have the same problem.
Some alpha-versions worked, then there was an update and after that, x started
crashing a few seconds after login. Sometimes, the logon-sound stuck in a loop.
This happened using the live-cd, too.
The stable version worked fine, but many weeks ago, there was an
Same problem here?
https://bugs.launchpad.net/ubuntu/+bug/228633
I already did a bug report while using the alpha version:
https://bugs.launchpad.net/ubuntu/+bug/203007
(I tried the proprietary drivers and they crashed, too.maybe it has nothing
to do with the drivers?)
--
glxinfo crashes
Public bug reported:
Binary package hint: gnome-applets
I configured the applet to show the ticker-symbol DCX.BA (daimler
chrysler). It got the actual value but never showed a chart (chart not
available).
I left the PC alone for about two hours. After that, it showed the crash
window.
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/13581076/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/13581077/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/13581078/ProcStatus.txt
** Visibility
Today's update seams to solve the issue.
It now works with the proprietary fglrx driver.
I didn't test the free driver because when I enable desktop effects, it
installs the proprietary driver.
--
[Hardy Beta] x-server freezes after startup (mobility radeon 9700)
I tried hardy beta. Installation only works with the alternate install
cd.
The normal installation cd showed a corrupted picture after starting x (see
attached file first-boot_hardybeta.jpg).
The mouse-cursor was displayed correctly and moved
I rebooted and it looked fine now, but crashed
second attachment.
** Attachment added: next-boot_hardybeta.jpg
http://launchpadlibrarian.net/12927274/next-boot_hardybeta.jpg
--
[Hardy Beta] x-server freezes after startup (mobility radeon 9700)
https://bugs.launchpad.net/bugs/203007
You received this bug notification because you are a
** Summary changed:
- [Hardy Alpha 6] x-server freezes after startup
+ [Hardy Beta] x-server freezes after startup (mobility radeon 9700)
--
[Hardy Beta] x-server freezes after startup (mobility radeon 9700)
https://bugs.launchpad.net/bugs/203007
You received this bug notification because you
I edited
~/gconf/desktop/gnome/applications/window_manager/%gconf.xml
end changed /usr/bin/compiz to /usr/bin/metacity
This disables desktop-effects.
It now works with all open source and proprietary drivers.
I noticed that the fan of my notebook stays off now.
Before, it was active without any
running glxinfo gives name of display: :0.0
After that the system freezes.
--
[Hardy Alpha 6] x-server freezes after startup
https://bugs.launchpad.net/bugs/203007
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
I have only one Device, Monitor and Screen defined and no Xinerama.
I only use the internal screen of the laptop.
--
[Hardy Alpha 6] x-server freezes after startup
https://bugs.launchpad.net/bugs/203007
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I took the xorg.conf file from gutsy. It's now working with vesa (both
gnome and kde4).
Another thing I noticed: Shortly before starting gnome oder kde4, a corrupted
picture can be seen for about a half second.
For example, if I used Windows XP before and rebooted, I can see a corrupted
version
mobility radeon
9700/64MB.
kede
** Affects: ubuntu
Importance: Undecided
Status: New
** Description changed:
Hello,
I used an older alpha of hardy alpha (i think it was alpha 4) some weeks ago
and it worked. After some weeks (and updates) it was broken (x-server crashed).
Now
is an Acer Travelmate 4001lmi with ati mobility radeon
9700/64MB.
- Kersten
+ kede
--
[Hardy Alpha 6] x-server freezes after startup
https://bugs.launchpad.net/bugs/203007
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
84 matches
Mail list logo
