Unfortunately, the NTLDR not found also occurs with version
4.7pre and an Intel D915GAG board with S-ATA drive attached.
I was able to work arround this by
1) make partitions with parted
2) boot with a win95b disk, execute fdisk /mbr and format c:
3) use unattended with do nothing on
have a look at
http://www.ubertechnique.com/unattended/Scripts
- Jo
---
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get
Uff ... now it worked, after I
* deleted all disk related parameters from site/unattended.txt
[_meta] section,
* booted with a win95/2 boot disk,
* ran fdisk to build a primary fat32 partition,
* rebooted,
* did the format c: /s by myself , and
* answered continue/no to the
When starting with the linux boot disk, on some machine the
installation process hangs copying the os files and the first
reboot with
NTLDR not found
A message before said
*** Found no legacy BIOS data. Probably no big deal.
Continuing.
The disk is an old Fujitsu M1638TAU 2,5 GB. Is
Thanks for your hints. You are right, the Bios is pretty old
(Award 4.51PG of 1995). fdisk /info /tech worked with the
Freedos fdisk (not with the MS-DOS 6.22 or Win95/2 fdisk).
Unfortunataly it reported slightly other values than the bios
(620/127/63 vs. 622/128/63).
I tried both ways:
1)
Zitat von Assi Levi [EMAIL PROTECTED]:
What the command line .
eg
todo.pl net user user1 secretpw /add /expires:never
todo.pl net localgroup groupname domname\user1 /add
Jo
---
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE
I had a minor problem (in 4.4b) when executing a batch file with
the entry:
todo.pl xcopy /s /i /q /y z:\packages\akdosapp\* c:\
The error message is:
Running: xcopy /s /i /q /y z:\packages\akdosapp\* c:
Fehler beim Analysieren der Befehlszeile
xcopy /s /i /q /y z:\packages\akdosapp\* c:
Does anybody know how share a printer from the command line? By
enhancing the Wiki NetworkPrinter script, for example? (May
sound funny, but I use a local printer share to mount a network
printer to lpt1 for old dos applications).
Any hints would be highly appreciated.
jo
If somebody can insert a CD (and remove it a minute later ...),
no other user interaction is required. It's possible do all the
rest with dhcp option 233 and pre-configuration of unattend.txt.
Worked fine for me with 4.4b.
Jo
Zitat von Sebatian Latza [EMAIL PROTECTED]:
Hi everyone,
short
Unfortunately, it doesn't work either (same messages) - so the
question is open again.
Thanks, Jo
Zitat von Wim Vandersmissen [EMAIL PROTECTED]:
Could you try this bootdisk on
http://bofh.be/unattended/linuxboot.iso
and let me know if you also get the illegal instruction
and
you're using an AMD box.
The bash in the new iso I just put up is compiled for i386,
which should give
no problems.
Could you try again?
(http://bofh.be/unattended/linuxboot.iso)
--Wim
On Sun, Aug 29, 2004 at 01:49:35PM +0200, jo / ak wrote:
Unfortunately, it doesn't work either (same
It works great - the illegal instruction is gone! Thank you
very much!!
Now I get another error later on:
Bios EDD Facility v0.16 2004-Jun-25, 1 devices found
..done loading edd
*** ...and locate the boot device
*** find-boot-device failed
*** Dropping to shell
# with 1 Maxtor 2B020H1 IDE HD
Zitat von Patrick J. LoPresti [EMAIL PROTECTED]:
Does ls /sys/block show any hdX directories?
it shows hda/hda1, no hdc
You were right, there is an error earlier, in PIIX4. But I don't
understand what's going on:
loading ide-generic
[...]
ide: Assuming 33MHz system bus speed for PIO mode;
I have the same problem with two different PCs (both
comparatively old, with Asus P/I P55T2P4 and Asus TXP4
Mainboards). Version is 4.4b.
For me, the sequence is:
..
WELCOME!
Illegal Instruction!
Illegal Instruction!
Illegal Instruction!
Illegal Instruction!
Hm, may be we are on a serial console.
Here a script for the installation of Helios Textpad:
:: OPTIONAL: Install Textpad editor
::
URL|ENU|http://download.textpad.com/download/v47/txpeng473.exe|packages/textpad/txpenu473.exe
::
URL|DEU|http://download.textpad.com/download/v47/txpdeu473.exe|packages/textpad/txpdeu473.exe
@Echo off
With the linux boot disk 4.4a, I tried to use the DHCP option
233. A /var/run/dhcp.out was written with the line
unattend='z_user=hanswurst z_pass=secret
z_path=//at-12/install'
but this share wasn't used. The system asks for
\\ntinstall\install again and again. Using single and double \\
in
16 matches
Mail list logo
